scholarly journals Wavelength-Resolution SAR Ground Scene Prediction Based on Image Stack

Sensors ◽  
2020 ◽  
Vol 20 (7) ◽  
pp. 2008 ◽  
Author(s):  
Bruna G. Palm ◽  
Dimas I. Alves ◽  
Mats I. Pettersson ◽  
Viet T. Vu ◽  
Renato Machado ◽  
...  
Keyword(s):  
Change Detection ◽  
False Alarm ◽  
False Alarm Rate ◽  
Detection Algorithm ◽  
Probability Of Detection ◽  
Reference Image ◽  
Sar Images ◽  
Image Stack ◽  
Military Vehicles ◽  
Wavelength Resolution

This paper presents five different statistical methods for ground scene prediction (GSP) in wavelength-resolution synthetic aperture radar (SAR) images. The GSP image can be used as a reference image in a change detection algorithm yielding a high probability of detection and low false alarm rate. The predictions are based on image stacks, which are composed of images from the same scene acquired at different instants with the same flight geometry. The considered methods for obtaining the ground scene prediction include (i) autoregressive models; (ii) trimmed mean; (iii) median; (iv) intensity mean; and (v) mean. It is expected that the predicted image presents the true ground scene without change and preserves the ground backscattering pattern. The study indicates that the the median method provided the most accurate representation of the true ground. To show the applicability of the GSP, a change detection algorithm was considered using the median ground scene as a reference image. As a result, the median method displayed the probability of detection of 97 % and a false alarm rate of 0.11 / km 2 , when considering military vehicles concealed in a forest.

scholarly journals A Wavelength-Resolution SAR Change Detection Method Based on Image Stack through Robust Principal Component Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 833
Author(s):  
Lucas P. Ramos ◽  
Alexandre B. Campos ◽  
Christofer Schwartz ◽  
Leonardo T. Duarte ◽  
Dimas I. Alves ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Change Detection ◽  
False Alarm ◽  
Detection Method ◽  
Principal Component ◽  
Robust Principal Component Analysis ◽  
Sar Images ◽  
Image Stack ◽  
Wavelength Resolution ◽  
Reference Images

Recently, it was demonstrated that low-frequency wavelength-resolution synthetic aperture radar (SAR) images could be considered to follow an additive mixing model due to their backscatter characteristics. This simplification allows for the use of source separation methods, such as robust principal component analysis (RPCA) via principal component pursuit (PCP), for detecting changes in those images. In this manuscript, a change detection method for wavelength-resolution SAR images based on image stack through RPCA is proposed. The method aims to explore both the temporal and flight heading diversity of a set of wavelength-resolution multitemporal SAR images in order to detect concealed targets in forestry areas. A heuristic based on three rules for better exploring the RPCA results is introduced, and a new configurable parameter for false alarm reduction based on the analysis of image windows is proposed. The method is evaluated using real data obtained from measurements of the ultrawideband (UWB) very high-frequency (VHF) SAR system CARABAS-II. Experiments for stacks of four and seven reference images are conducted, and the use of reference images acquired with different flight headings is explored. The results indicate that a gain in performance can be achieved by using large image stacks containing, at least, one image of each possible flight heading of the data set, which can result in a probability of detection (PD) above 99% for a false alarm rate (FAR) as low as one false alarm per three square kilometers. Furthermore, it is demonstrated that high PD and low FAR can be achieved, also considering images from similar flight headings as reference images.

scholarly journals Change Detection Based on the Coefficient of Variation in SAR Time-Series of Urban Areas

2020 ◽  
Vol 12 (13) ◽  
pp. 2089 ◽  
Author(s):  
Elise Colin Koeniguer ◽  
Jean-Marie Nicolas
Keyword(s):  
Time Series ◽  
Change Detection ◽  
False Alarm ◽  
False Alarm Rate ◽  
Coefficient Of Variation ◽  
Urban Areas ◽  
Real Data ◽  
Probability Of Detection ◽  
Detection Methods ◽  
Coefficients Of Variations

This paper discusses change detection in SAR time-series. First, several statistical properties of the coefficient of variation highlight its pertinence for change detection. Subsequently, several criteria are proposed. The coefficient of variation is suggested to detect any kind of change. Furthermore, several criteria that are based on ratios of coefficients of variations are proposed to detect long events, such as construction test sites, or point-event, such as vehicles. These detection methods are first evaluated on theoretical statistical simulations to determine the scenarios where they can deliver the best results. The simulations demonstrate the greater sensitivity of the coefficient of variation to speckle mixtures, as in the case of agricultural plots. Conversely, they also demonstrate the greater specificity of the other criteria for the cases addressed: very short event or longer-term changes. Subsequently, detection performance is assessed on real data for different types of scenes and sensors (Sentinel-1, UAVSAR). In particular, a quantitative evaluation is performed with a comparison of our solutions with baseline methods. The proposed criteria achieve the best performance, with reduced computational complexity. On Sentinel-1 images containing mainly construction test sites, our best criterion reaches a probability of change detection of 90% for a false alarm rate that is equal to 5%. On UAVSAR images containing boats, the criteria proposed for short events achieve a probability of detection equal to 90% of all pixels belonging to the boats, for a false alarm rate that is equal to 2%.

scholarly journals AN ADAPTIVE SHIP DETECTION ALGORITHM FOR HRWS SAR IMAGES UNDER COMPLEX BACKGROUND: APPLICATION TO SENTINEL1A DATA

2018 ◽  
Vol XLII-3 ◽  
pp. 497-503
Author(s):  
G. He ◽  
Z. Xia ◽  
H. Chen ◽  
K. Li ◽  
Z. Zhao ◽  
...  
Keyword(s):  
High Resolution ◽  
False Alarm ◽  
False Alarm Rate ◽  
Texture Features ◽  
Detection Algorithm ◽  
Support Vector ◽  
Constant False Alarm Rate ◽  
Sar Images ◽  
Ship Detection ◽  
Wide Swath

Real-time ship detection using synthetic aperture radar (SAR) plays a vital role in disaster emergency and marine security. Especially the high resolution and wide swath (HRWS) SAR images, provides the advantages of high resolution and wide swath synchronously, significantly promotes the wide area ocean surveillance performance. In this study, a novel method is developed for ship target detection by using the HRWS SAR images. Firstly, an adaptive sliding window is developed to propose the suspected ship target areas, based upon the analysis of SAR backscattering intensity images. Then, backscattering intensity and texture features extracted from the training samples of manually selected ship and non-ship slice images, are used to train a support vector machine (SVM) to classify the proposed ship slice images. The approach is verified by using the Sentinl1A data working in interferometric wide swath mode. The results demonstrate the improvement performance of the proposed method over the constant false alarm rate (CFAR) method, where the classification accuracy improved from 88.5 % to 96.4 % and the false alarm rate mitigated from 11.5 % to 3.6 % compared with CFAR respectively.

scholarly journals CNN-Based Change Detection Algorithm for Wavelength-Resolution SAR Images

2020 ◽  
pp. 1-5
Author(s):  
Joao Gabriel Vinholi ◽  
Danilo Silva ◽  
Renato Machado ◽  
Mats I. Pettersson
Keyword(s):  
Change Detection ◽  
Detection Algorithm ◽  
Sar Images ◽  
Wavelength Resolution

A Constant False Alarm Rate-(CFAR) Based Change Detection Approach to Helicopter Diagnostics

2008 ◽  
Author(s):  
Kenneth Ranney ◽  
Hiralal Khatri ◽  
Jerry Silvious ◽  
Kwok Tom ◽  
Romeo del Rosario
Keyword(s):  
Change Detection ◽  
False Alarm ◽  
False Alarm Rate ◽  
Constant False Alarm Rate ◽  
Detection Approach

scholarly journals Realizing Target Detection in SAR Images Based on Multiscale Superpixel Fusion

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1643
Author(s):  
Ming Liu ◽  
Shichao Chen ◽  
Fugang Lu ◽  
Mengdao Xing ◽  
Jingbiao Wei
Keyword(s):  
Synthetic Aperture Radar ◽  
False Alarm ◽  
False Alarm Rate ◽  
Target Detection ◽  
Synthetic Aperture ◽  
False Alarms ◽  
Sar Image ◽  
Constant False Alarm Rate ◽  
Sar Images ◽  
Complex Scenes

For target detection in complex scenes of synthetic aperture radar (SAR) images, the false alarms in the land areas are hard to eliminate, especially for the ones near the coastline. Focusing on the problem, an algorithm based on the fusion of multiscale superpixel segmentations is proposed in this paper. Firstly, the SAR images are partitioned by using different scales of superpixel segmentation. For the superpixels in each scale, the land-sea segmentation is achieved by judging their statistical properties. Then, the land-sea segmentation results obtained in each scale are combined with the result of the constant false alarm rate (CFAR) detector to eliminate the false alarms located on the land areas of the SAR image. In the end, to enhance the robustness of the proposed algorithm, the detection results obtained in different scales are fused together to realize the final target detection. Experimental results on real SAR images have verified the effectiveness of the proposed algorithm.

scholarly journals Modified S2CVA Algorithm Using Cross-Sharpened Images for Unsupervised Change Detection

2018 ◽  
Vol 10 (9) ◽  
pp. 3301 ◽  
Author(s):  
Honglyun Park ◽  
Jaewan Choi ◽  
Wanyong Park ◽  
Hyunchun Park
Keyword(s):  
Change Detection ◽  
False Alarm ◽  
False Alarm Rate ◽  
Seasonal Effects ◽  
Detection Accuracy ◽  
Difference Image ◽  
Before And After ◽  
Change Detection Algorithms ◽  
The Difference ◽  
Direction Information

This study aims to reduce the false alarm rate due to relief displacement and seasonal effects of high-spatial-resolution multitemporal satellite images in change detection algorithms. Cross-sharpened images were used to increase the accuracy of unsupervised change detection results. A cross-sharpened image is defined as a combination of synthetically pan-sharpened images obtained from the pan-sharpening of multitemporal images (two panchromatic and two multispectral images) acquired before and after the change. A total of four cross-sharpened images were generated and used in combination for change detection. Sequential spectral change vector analysis (S2CVA), which comprises the magnitude and direction information of the difference image of the multitemporal images, was applied to minimize the false alarm rate using cross-sharpened images. Specifically, the direction information of S2CVA was used to minimize the false alarm rate when applying S2CVA algorithms to cross-sharpened images. We improved the change detection accuracy by integrating the magnitude and direction information obtained using S2CVA for the cross-sharpened images. In the experiment using KOMPSAT-2 satellite imagery, the false alarm rate of the change detection results decreased with the use of cross-sharpened images compared to that with the use of only the magnitude information from the original S2CVA.

Comparison of Meteorological Radar Signal Detectability with Noncoherent and Spectral-Based Processing

2016 ◽  
Vol 33 (4) ◽  
pp. 723-739 ◽  
Author(s):  
James B. Mead
Keyword(s):  
Signal Processing ◽  
False Alarm ◽  
False Alarm Rate ◽  
Time Domain ◽  
Spectral Width ◽  
Probability Of Detection ◽  
Spectral Domain ◽  
Processing Gain ◽  
Meteorological Radar ◽  
The Time Domain

AbstractDetection of meteorological radar signals is often carried out using power averaging with noise subtraction either in the time domain or the spectral domain. This paper considers the relative signal processing gain of these two methods, showing a clear advantage for spectral-domain processing when normalized spectral width is less than ~0.1. A simple expression for the optimal discrete Fourier transform (DFT) length to maximize signal processing gain is presented that depends only on the normalized spectral width and the time-domain weighting function. The relative signal processing gain between noncoherent power averaging and spectral processing is found to depend on a variety of parameters, including the radar wavelength, spectral width, available observation time, and the false alarm rate. Expressions presented for the probability of detection for noncoherent and spectral-based processing also depend on these same parameters. Results of this analysis show that DFT-based processing can provide a substantial advantage in signal processing gain and probability of detection, especially when the normalized spectral width is small and when a large number of samples are available. Noncoherent power estimation can provide superior probability of detection when the normalized spectral width is greater than ~0.1, especially when the desired false alarm rate exceeds 10%.

Sign in / Sign up

Export Citation Format

Share Document