scholarly journals In-Field Calibration of Triaxial Accelerometer Based on Beetle Swarm Antenna Search Algorithm

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 947 ◽  
Author(s):  
Pengfei Wang ◽  
Yanbin Gao ◽  
Menghao Wu ◽  
Fan Zhang ◽  
Guangchun Li
Keyword(s):  
Search Algorithm ◽  
Calibration Method ◽  
Measurement Unit ◽  
Triaxial Accelerometer ◽  
Nonlinear Mathematical Model ◽  
Nonlinear Method ◽  
Field Calibration ◽  
Intelligent Optimization Algorithm ◽  
External Equipment ◽  
Calibration Accuracy

Traditional calibration method is usually performed with expensive equipments such as three-axis turntable in a laboratory environment. However in practice, in order to ensure the accuracy and stability of the inertial navigation system (INS), it is usually necessary to recalibrate the inertial measurement unit (IMU) without external equipment in the field. In this paper, a new in-field recalibration method for triaxial accelerometer based on beetle swarm antenna search (BSAS) algorithm is proposed. Firstly, as a new intelligent optimization algorithm, BSAS algorithm and its improvements based on basic beetle antennae search (BAS) algorithm are introduced in detail. Secondly, the nonlinear mathematical model of triaxial accelerometer is established for higher calibration accuracy, and then 24 optimal measurement positions are designed by theoretical analysis. In addition, the calibration procedures are improved according to the characteristics of BSAS algorithm, then 15 calibration parameters in the nonlinear method are optimized by BSAS algorithm. Besides, the results of BSAS algorithm and basic BAS algorithm are compared by simulation, which shows the priority of BSAS algorithm in calibration field. Finally, two experiments demonstrate that the proposed method can achieve high precision in-field calibration without any external equipment, and meet the accuracy requirements of the INS.

A Rapid Field Calibrating Method for MIMU

2011 ◽  
Vol 80-81 ◽  
pp. 1140-1144
Author(s):  
Yu Bao Fan ◽  
Jie Li ◽  
Bo Wang ◽  
Xiao Chun Tian ◽  
Jun Liu
Keyword(s):  
Inertial Measurement Unit ◽  
Operation Time ◽  
Calibration Method ◽  
Least Square ◽  
Measurement Unit ◽  
Calibration Model ◽  
Time Saving ◽  
Inertial Measurement ◽  
Field Calibration ◽  
Calibration Program

When the Micro Inertial Measurement Unit is been placed randomly in the case of stationary, the sum vectors that measured by the inertial devices configured orthogonally along three axis, are constant vectors. In view of the above objective facts, a field calibration method of micro inertial measurement unit was proposed. On the base of the establishment and optimization of calibration model, all parameters to be calibrated can be obtained through the least square by the ellipsoid fitting, with the result of high-precision field calibration for micro inertial measurement unit. Finally, a filed calibration program for micro inertial measurement unit is scheduled reasonably. The experiment results show that the method has such characteristics such as easily-operation, time-saving, higher calibration accuracy, and not depending on the baseline direction and datum offered by precision instruments. Especially, it fits for inertial measurement systems which work short time and ask for high accuracy. In addition, it can also significantly increase the measurement accuracy of micro inertial measurement system in practical application.

scholarly journals A Separated Calibration Method for Inertial Measurement Units Mounted on Three-Axis Turntables

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2846 ◽  
Author(s):  
Chun-mei Dong ◽  
Shun-qing Ren ◽  
Xi-jun Chen ◽  
Zhen-huan Wang
Keyword(s):  
Inertial Measurement Unit ◽  
Functional Relationship ◽  
Calibration Method ◽  
Measurement Unit ◽  
Model Parameters ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Suboptimal Design ◽  
Calibration Accuracy ◽  
Simulation Results

Inertial Measurement Unit (IMU) calibration accuracy is easily affected by turntable errors, so the primary aim of this study is to reduce the dependence on the turntable’s precision during the calibration process. Firstly, the indicated-output of the IMU considering turntable errors is constructed and with the introduction of turntable errors, the functional relationship between turntable errors and the indicated-output was derived. Then, based on a D-suboptimal design, a calibration method for simultaneously identifying the IMU error model parameters and the turntable errors was proposed. Simulation results showed that some turntable errors could thus be effectively calibrated and automatically compensated. Finally, the theoretical validity was verified through experiments. Compared with the traditional method, the method proposed in this paper can significantly reduce the influence of the turntable errors on the IMU calibration accuracy.

Graph-optimisation-based self-calibration method for IMU/odometer using preintegration theory

2022 ◽  
pp. 1-20
Author(s):  
Shiyu Bai ◽  
Jizhou Lai ◽  
Pin Lyu ◽  
Yiting Cen ◽  
Bingqing Wang ◽  
...  
Keyword(s):  
Inertial Measurement Unit ◽  
Experimental Tests ◽  
Calibration Method ◽  
Measurement Unit ◽  
Integrated Navigation ◽  
Integrated Navigation System ◽  
Self Calibration ◽  
Calibration Methods ◽  
Calibration Accuracy

Determination of calibration parameters is essential for the fusion performance of an inertial measurement unit (IMU) and odometer integrated navigation system. Traditional calibration methods are commonly based on the filter frame, which limits the improvement of the calibration accuracy. This paper proposes a graph-optimisation-based self-calibration method for the IMU/odometer using preintegration theory. Different from existing preintegrations, the complete IMU/odometer preintegration model is derived, which takes into consideration the effects of the scale factor of the odometer, and misalignments in the attitude and position between the IMU and odometer. Then the calibration is implemented by the graph-optimisation method. The KITTI dataset and field experimental tests are carried out to evaluate the effectiveness of the proposed method. The results illustrate that the proposed method outperforms the filter-based calibration method. Meanwhile, the performance of the proposed IMU/odometer preintegration model is optimal compared with the traditional preintegration models.

Network dynamic field calibration for micro inertial measurement unit

2018 ◽  
Vol 41 (10) ◽  
pp. 2826-2837
Author(s):  
Xu Yun ◽  
Su Yan ◽  
Zhu Xinhua ◽  
Luo Zhihang
Keyword(s):  
Inertial Measurement Unit ◽  
Angular Rate ◽  
Calibration Method ◽  
Measurement Unit ◽  
Network Dynamic ◽  
Zero Bias ◽  
Inertial Measurement ◽  
Field Calibration ◽  
Dynamic Field ◽  
Environment Temperature

Calibration accuracy of micro inertial measurement unit (MIMU) will affect the navigation accuracy of micro strap-down inertial navigation system. Generally, when the application environment changes (i.e. environment temperature and humidity), the specific force and angular rate output by MIMU will be changed, which were influenced by the zero bias of accelerometers, the zero drift of gyroscopes and so on. Thus, it is necessary to carry out the field calibration for MIMU. Aiming at the application of multi MIMUs, the network dynamic field calibration method is proposed in this paper. According to the navigation attitude and velocity error models, the estimating model is established. Then, the observability for the parameters in the estimating model is analyzed. By fusing the output information of MIMUs and GPS, vehicle experiments are carried out with the designed maneuvers in order to estimate the parameters. The experiment result illustrated that the proposed network dynamic filed calibration can efficiently realize the calibration for the parameters in the model of several MIMUs simultaneously.

scholarly journals Optimization-Based Online Initialization and Calibration of Monocular Visual-Inertial Odometry Considering Spatial-Temporal Constraints

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2673
Author(s):  
Weibo Huang ◽  
Weiwei Wan ◽  
Hong Liu
Keyword(s):  
Measurement Data ◽  
Calibration Method ◽  
Bundle Adjustment ◽  
Measurement Unit ◽  
Temporal Parameters ◽  
Work Routine ◽  
Initial States ◽  
Time Offset ◽  
Public Datasets ◽  
Metric Scale

The online system state initialization and simultaneous spatial-temporal calibration are critical for monocular Visual-Inertial Odometry (VIO) since these parameters are either not well provided or even unknown. Although impressive performance has been achieved, most of the existing methods are designed for filter-based VIOs. For the optimization-based VIOs, there is not much online spatial-temporal calibration method in the literature. In this paper, we propose an optimization-based online initialization and spatial-temporal calibration method for VIO. The method does not need any prior knowledge about spatial and temporal configurations. It estimates the initial states of metric-scale, velocity, gravity, Inertial Measurement Unit (IMU) biases, and calibrates the coordinate transformation and time offsets between the camera and IMU sensors. The work routine of the method is as follows. First, it uses a time offset model and two short-term motion interpolation algorithms to align and interpolate the camera and IMU measurement data. Then, the aligned and interpolated results are sent to an incremental estimator to estimate the initial states and the spatial–temporal parameters. After that, a bundle adjustment is additionally included to improve the accuracy of the estimated results. Experiments using both synthetic and public datasets are performed to examine the performance of the proposed method. The results show that both the initial states and the spatial-temporal parameters can be well estimated. The method outperforms other contemporary methods used for comparison.

Systematic Calibration Method for FOG Inertial Measurement Units

2013 ◽  
Vol 662 ◽  
pp. 717-720 ◽  
Author(s):  
Zhen Yu Zheng ◽  
Yan Bin Gao ◽  
Kun Peng He
Keyword(s):  
Inertial Measurement Unit ◽  
Inertial Sensors ◽  
Calibration Method ◽  
State Equation ◽  
Measurement Unit ◽  
Observation System ◽  
Body Frame ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Error Coefficients

As an inertial sensors assembly, the FOG inertial measurement unit (FIMU) must be calibrated before being used. The paper presents a one-time systematic IMU calibration method only using two-axis low precision turntable. First, the detail error model of inertial sensors using defined body frame is established. Then, only velocity taken as observation, system 33 state equation is established including the lever arm effects and nonlinear terms of scale factor error. The turntable experiments verify that the method can identify all the error coefficients of FIMU on low-precision two-axis turntable, after calibration the accuracy of navigation is improved.

Research on Automatic Joint Calibration Method of Multi 3D-LIDARs and Inertial Measurement Unit

2021 ◽  
Author(s):  
Jinghua Zhang ◽  
Rui He ◽  
Jian Wu ◽  
Shuai Li ◽  
Xuesong Chen ◽  
...  
Keyword(s):  
Inertial Measurement Unit ◽  
Calibration Method ◽  
Measurement Unit ◽  
Inertial Measurement
Sign in / Sign up

Export Citation Format

Share Document