scholarly journals Optical Fiber FP Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on the Empirical Mode Decomposition Algorithm

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 664 ◽  
Author(s):  
Everardo Vargas-Rodriguez ◽  
Ana Dinora Guzman-Chavez ◽  
Roberto Baeza-Serrato ◽  
Mario Alberto Garcia-Ramirez
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Empirical Mode Decomposition ◽  
Temperature Sensor ◽  
Dynamic Measurement ◽  
Intrinsic Mode Functions ◽  
Interferometric Sensors ◽  
Mode Decomposition ◽  
The Mathematical Model ◽  
Proof Of Principle

In this work, a dual refractive index and temperature sensor based on an interferometric system and on the empirical mode decomposition (EMD) algorithm is presented. Here, it is shown that the EMD provides a comprehensive way to analyze and decompose complex reflection spectra produced by an interferometric filter build at the tip of an optical fiber. By applying the EMD algorithm, the spectrum can be decomposed into a set of intrinsic mode functions (IMF) from which the temperature and the refractive index can be easily extracted. Moreover, the proposed methodology provides a detailed insight of the behavior of this type of interferometric sensors and allows widening of the dynamic measurement ranges of both variables. Here, for proof of principle purposes, a filter based on a stack of three layers (two of them were thermo-sensitive) was fabricated. Finally, it is shown that the proposed methodology can decompose the experimental measured spectra and to determine the refractive index and the temperature, supporting the mathematical model.

Empirical Mode Decomposition-Based Detection of Bend-Induced Error and Its Correction in a Raman Optical Fiber Distributed Temperature Sensor

2016 ◽  
Vol 16 (5) ◽  
pp. 1243-1252 ◽  
Author(s):  
Manoj Kumar Saxena ◽  
S. D. V. S. Jagannadha Raju ◽  
Rajesh Arya ◽  
Ram Bilas Pachori ◽  
S. V. G. Ravindranath ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Empirical Mode Decomposition ◽  
Temperature Sensor ◽  
Distributed Temperature Sensor ◽  
Mode Decomposition

Multifractal characterization of mechanical vibration signals through improved empirical mode decomposition-based detrended fluctuation analysis

2016 ◽  
Vol 231 (22) ◽  
pp. 4139-4149 ◽  
Author(s):  
Du Wenliao ◽  
Guo Zhiqiang ◽  
Gong Xiaoyun ◽  
Xie Guizhong ◽  
Wang Liangwen ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Detrended Fluctuation Analysis ◽  
Fluctuation Analysis ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Multifractal Detrended Fluctuation Analysis ◽  
Mode Decomposition ◽  
Kolmogorov Smirnov ◽  
Detrended Fluctuation ◽  
Smirnov Test

A novel multifractal detrended fluctuation analysis based on improved empirical mode decomposition for the non-linear and non-stationary vibration signal of machinery is proposed. As the intrinsic mode functions selection and Kolmogorov–Smirnov test are utilized in the detrending procedure, the present approach is quite available for contaminated data sets. The intrinsic mode functions selection is employed to deal with the undesired intrinsic mode functions named pseudocomponents, and the two-sample Kolmogorov–Smirnov test works on each intrinsic mode function and Gaussian noise to detect the noise-like intrinsic mode functions. The proposed method is adaptive to the signal and weakens the effect of noise, which makes this approach work well for vibration signals collected from poor working conditions. We assess the performance of the proposed procedure through the classic multiplicative cascading process. For the pure simulation signal, our results agree with the theoretical results, and for the contaminated time series, the proposed method outperforms the traditional multifractal detrended fluctuation analysis methods. In addition, we analyze the vibration signals of rolling bearing with different fault types, and the presence of multifractality is confirmed.

Ensemble Empirical Mode Decomposition Based Deep Learning Model for Short-Term Wind Power Forecasting

2022 ◽  
Author(s):  
J.M. González-Sopeña
Keyword(s):  
Deep Learning ◽  
Wind Power ◽  
Empirical Mode Decomposition ◽  
Time Series Data ◽  
Ensemble Empirical Mode Decomposition ◽  
Series Data ◽  
Intrinsic Mode Functions ◽  
Wind Power Forecasting ◽  
Mode Decomposition ◽  
Power Forecasting

Abstract. In the last few years, wind power forecasting has established itself as an essential tool in the energy industry due to the increase of wind power penetration in the electric grid. This paper presents a wind power forecasting method based on ensemble empirical mode decomposition (EEMD) and deep learning. EEMD is employed to decompose wind power time series data into several intrinsic mode functions and a residual component. Afterwards, every intrinsic mode function is trained by means of a CNN-LSTM architecture. Finally, wind power forecast is obtained by adding the prediction of every component. Compared to the benchmark model, the proposed approach provides more accurate predictions for several time horizons. Furthermore, prediction intervals are modelled using quantile regression.

scholarly journals Empirical Mode Decomposition in Discrete Time Signals Denoising

2019 ◽  
Vol 16 (1) ◽  
pp. 10-13 ◽  
Author(s):  
Zoltán Germán-Salló
Keyword(s):  
Empirical Mode Decomposition ◽  
Signal To Noise Ratio ◽  
Main Idea ◽  
Discrete Wavelet ◽  
Intrinsic Mode Functions ◽  
Nonlinear Signal Processing ◽  
Mode Decomposition ◽  
Time Signals ◽  
Nonlinear Signal ◽  
Filtering Procedure

Abstract This study explores the data-driven properties of the empirical mode decomposition (EMD) for signal denoising. EMD is an acknowledged procedure which has been widely used for non-stationary and nonlinear signal processing. The main idea of the EMD method is to decompose the analyzed signal into components without using expansion functions. This is a signal dependent representation and provides intrinsic mode functions (IMFs) as components. These are analyzed, through their Hurst exponent and if they are found being noisy components they will be partially or integrally eliminated. This study presents an EMD decomposition-based filtering procedure applied to test signals, the results are evaluated through signal to noise ratio (SNR) and mean square error (MSE). The obtained results are compared with discrete wavelet transform based filtering results.

scholarly journals Texture Feature Extraction Method for Ground Nephogram Based on Hilbert Spectrum of Bidimensional Empirical Mode Decomposition

2014 ◽  
Vol 31 (9) ◽  
pp. 1982-1994 ◽  
Author(s):  
Xiaoying Chen ◽  
Aiguo Song ◽  
Jianqing Li ◽  
Yimin Zhu ◽  
Xuejin Sun ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Recognition Rate ◽  
Texture Feature ◽  
Intrinsic Mode Functions ◽  
Hilbert Spectrum ◽  
Feature Extraction Method ◽  
Hilbert Huang Transform ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Bidimensional Empirical Mode Decomposition

Abstract It is important to recognize the type of cloud for automatic observation by ground nephoscope. Although cloud shapes are protean, cloud textures are relatively stable and contain rich information. In this paper, a novel method is presented to extract the nephogram feature from the Hilbert spectrum of cloud images using bidimensional empirical mode decomposition (BEMD). Cloud images are first decomposed into several intrinsic mode functions (IMFs) of textural features through BEMD. The IMFs are converted from two- to one-dimensional format, and then the Hilbert–Huang transform is performed to obtain the Hilbert spectrum and the Hilbert marginal spectrum. It is shown that the Hilbert spectrum and the Hilbert marginal spectrum of different types of cloud textural images can be divided into three different frequency bands. A recognition rate of 87.5%–96.97% is achieved through random cloud image testing using this algorithm, indicating the efficiency of the proposed method for cloud nephogram.

Spatiotemporal Trend and Variability of Precipitation in Taiwan Based on Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD)

2021 ◽  
Author(s):  
Chun-Hsiang Tang ◽  
Christina W. Tsai
Keyword(s):  
Time Series ◽  
Empirical Mode Decomposition ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Short Term ◽  
Time Frequency ◽  
Spatial Locality ◽  
Temperature And Precipitation ◽  
Mode Decomposition ◽  
Climatic Scenarios

<p>Abstract</p><p>Most of the time series in nature are nonlinear and nonstationary affected by climate change particularly. It is inevitable that Taiwan has also experienced frequent drought events in recent years. However, drought events are natural disasters with no clear warnings and their influences are cumulative. The difficulty of detecting and analyzing the drought phenomenon remains. To deal with the above-mentioned problem, Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD) is introduced to analyze the temperature and rainfall data from 1975~2018 in this study, which is a powerful method developed for the time-frequency analysis of nonlinear, nonstationary time series. This method can not only analyze the spatial locality and temporal locality of signals but also decompose the multiple-dimensional time series into several Intrinsic Mode Functions (IMFs). By the set of IMFs, the meaningful instantaneous frequency and the trend of the signals can be observed. Considering stochastic and deterministic influences, to enhance the accuracy this study also reconstruct IMFs into two components, stochastic and deterministic, by the coefficient of auto-correlation.</p><p>In this study, the influences of temperature and precipitation on the drought events will be discussed. Furthermore, to decrease the significant impact of drought events, this study also attempts to forecast the occurrences of drought events in the short-term via the Artificial Neural Network technique. And, based on the CMIP5 model, this study also investigates the trend and variability of drought events and warming in different climatic scenarios.</p><p> </p><p>Keywords: Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD), Intrinsic Mode Function(IMF), Drought</p>

Optical fiber temperature sensor with insensitive refractive index and strain based on phase demodulation

2020 ◽  
Vol 62 (12) ◽  
pp. 3733-3738
Author(s):  
Tong Nan ◽  
Bo Liu ◽  
Yongfeng Wu ◽  
Junfeng Wang ◽  
Yaya Mao ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Fiber ◽  
Temperature Sensor ◽  
Phase Demodulation

scholarly journals Gearbox Fault Diagnosis Using Complementary Ensemble Empirical Mode Decomposition and Permutation Entropy

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Liye Zhao ◽  
Wei Yu ◽  
Ruqiang Yan
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Correlation Coefficients ◽  
Ensemble Empirical Mode Decomposition ◽  
Permutation Entropy ◽  
Support Vector ◽  
Svm Classifier ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition

This paper presents an improved gearbox fault diagnosis approach by integrating complementary ensemble empirical mode decomposition (CEEMD) with permutation entropy (PE). The presented approach identifies faults appearing in a gearbox system based on PE values calculated from selected intrinsic mode functions (IMFs) of vibration signals decomposed by CEEMD. Specifically, CEEMD is first used to decompose vibration signals characterizing various defect severities into a series of IMFs. Then, filtered vibration signals are obtained from appropriate selection of IMFs, and correlation coefficients between the filtered signal and each IMF are used as the basis for useful IMFs selection. Subsequently, PE values of those selected IMFs are utilized as input features to a support vector machine (SVM) classifier for characterizing the defect severity of a gearbox. Case study conducted on a gearbox system indicates the effectiveness of the proposed approach for identifying the gearbox faults.

Sign in / Sign up

Export Citation Format

Share Document