scholarly journals CSRR-Based Microwave Sensor for Dielectric Materials Characterization Applied to Soil Water Content Determination

Sensors ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 255 ◽  
Author(s):  
João G. D. Oliveira ◽  
Erica N. M. G. Pinto ◽  
Valdemir P. Silva Neto ◽  
Adaildo G. D’Assunção

A new and compact sensor based on the complementary split-ring resonator (CSRR) structure is proposed to characterize the relative permittivity of various dielectric materials, enabling the determination of soil water content (SWC). The proposed sensor consists of a circular microstrip patch antenna supporting a 3D-printed small cylindrical container made out of Acrylonitrile-Butadiene-Styrene (ABS) filament. The principle of operation is based on the shifting of two of the antenna resonant frequencies caused by changing the relative permittivity of the material under test (MUT). Simulations are performed enabling the development of an empirical model of analysis. The sensitivity of the sensor is investigated and its effectiveness is analyzed by characterizing typical dielectric materials. The proposed sensor, which can be applied to characterize different types of dielectric materials, is used to determine the percentage of water contained in different soil types. Prototypes are fabricated and measured and the obtained results are compared with results from other research works, to validate the proposed sensor effectiveness. Moreover, the sensor was used to determine the percentage of water concentration in quartz sand and red clay samples.

1998 ◽  
Vol 2 (1) ◽  
pp. 111-120 ◽  
Author(s):  
D. A. Robinson ◽  
C. M. K. Gardner ◽  
J. Evans ◽  
J. D. Cooper ◽  
M. G. Hodnett ◽  
...  

Abstract. Capacitance probes are a fast, safe and relatively inexpensive means of measuring the relative permittivity of soils, which can then be used to estimate soil water content. Initial experiments with capacitance probes used empirical calibrations between the frequency response of the instrument and soil water content. This has the disadvantage that the calibrations are instrument-dependent. A twofold calibration strategy is described in this paper; the instrument frequency is turned into relative permittivity (dielectric constant) which can then be calibrated against soil water content. This approach offers the advantages of making the second calibration, from soil permittivity to soil water content. instrument-independent and allows comparison with other dielectric methods, such as time domain reflectometry. A physically based model, used to calibrate capacitance probes in terms of relative permittivity (εr) is presented. The model, which was developed from circuit analysis, predicts, successfully, the frequency response of the instrument in liquids with different relative permittivities, using only measurements in air and water. lt was used successfully to calibrate 10 prototype surface capacitance insertion probes (SCIPS) and a depth capacitance probe. The findings demonstrate that the geometric properties of the instrument electrodes were an important parameter in the model, the value of which could be fixed through measurement. The relationship between apparent soil permittivity and volumetric water content has been the subject of much research in the last 30 years. Two lines of investigation have developed, time domain reflectometry (TDR) and capacitance. Both methods claim to measure relative permittivity and should therefore be comparable. This paper demonstrates that the IH capacitance probe overestimates relative permittivity as the ionic conductivity of the medium increases. Electrically conducting ionic solutions were used to test the magnitude of this effect on the determination of relative permittivity. The response was modelled so that the relative permittivity, independent of ionic conductivity, could be determined in solutions with an electrical conductivity of up to 0.25 S m-1. It was found that a solution EC of less than 0.05 S m-1 had little impact on the permittivity measurement.


2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Muhammad Mukhlisin ◽  
Almushfi Saputra

In recent years many models have been proposed for measuring soil water content (θ) based on the permittivity (ε) value. Permittivity is one of the properties used to determineθin measurements using the electromagnetic method. This method is widely used due to quite substantial differences in values ofεfor air, soil, and water, as it allows theθvalue to be measured accurately. The performance of six proposed models with one parameter (i.e., permittivity) and five proposed models with two or more parameters (i.e., permittivity, porosity, and dry bulk density of soil) is discussed and evaluated. Secondary data obtained from previous studies are used for comparison to calibrate and evaluate the models. The results show that the models with one parameter proposed by Roth et al. (1992) and Topp et al. (1980) have the greatestR2data errors, while for the model with two parameters, the model proposed by Malicki et al. (1996) agrees very well with the data compared with other models.


2016 ◽  
Vol 59 (3) ◽  
Author(s):  
Roberta Porretta ◽  
Fabio Bianchi

<p>A mathematical model of water diffusion in the vadose zone has been implemented for different types of soil textures in order to determine the soil water content (SWC) profiles in dependence of depth and time. From these profiles, obtained for different soils, we derived the characteristic electrical parameters, such as relative permittivity (<span class="gt-card-ttl-txt">epsilon</span><span><sub>r</sub></span>) and electrical conductivity (<span>sigma</span>), and their variation in time, employing empirical relations available in the scientific literature. The simulation through mathematical models has been performed taking into account different types of soils characterized by the percentage composition of sand, clay and silt in the textural triangle, which provides some physical and chemical properties that affect the water retention in the soil. The resulting simulated profiles of SWC and consequently permittivity and conductivity profiles, span over a certain range of values suggesting the best techniques and the limits in geophysical investigation. Moreover this a-prior knowledge helps in the elaboration and interpretation of permittivity and conductivity data obtained by the measurements. Permittivity and conductivity profiles are particularly useful in some environmental applications when the soil textures are (or supposed to be) known as in the typical case of landfill leachate dispersion. Since the soil textures beneath or nearby a disposal waste are characterized by a SWC, the values of (<span class="gt-card-ttl-txt">epsilon</span><sub>r</sub>) and (sigma) at various depth can be directly inferred.</p>


Author(s):  
M.C.H.Mouat Pieter Nes

Reduction in water content of a soil increased the concentration of ammonium and nitrate in solution, but had no effect on the concentration of phosphate. The corresponding reduction in the quantity of phosphate in solution caused an equivalent reduction in the response of ryegrass to applied phosphate. Keywords: soil solution, soil water content, phosphate, ryegrass, nutrition.


2010 ◽  
Vol 59 (1) ◽  
pp. 157-164 ◽  
Author(s):  
E. Tóth ◽  
Cs. Farkas

Soil biological properties and CO2emission were compared in undisturbed grass and regularly disked rows of a peach plantation. Higher nutrient content and biological activity were found in the undisturbed, grass-covered rows. Significantly higher CO2fluxes were measured in this treatment at almost all the measurement times, in all the soil water content ranges, except the one in which the volumetric soil water content was higher than 45%. The obtained results indicated that in addition to the favourable effect of soil tillage on soil aeration, regular soil disturbance reduces soil microbial activity and soil CO2emission.


Author(s):  
Justyna Szerement ◽  
Aleksandra Woszczyk ◽  
Agnieszka Szyplowska ◽  
Marcin Kafarski ◽  
Arkadiusz Lewandowski ◽  
...  

2014 ◽  
Vol 22 (3) ◽  
pp. 300-307
Author(s):  
Meijun ZHANG ◽  
Wude YANG ◽  
Meichen FENG ◽  
Yun DUAN ◽  
Mingming TANG ◽  
...  

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 549f-550
Author(s):  
Mongi Zekri ◽  
Bruce Schaffer ◽  
Stephen K. O'Hair ◽  
Roberto Nunez-Elisea ◽  
Jonathan H. Crane

In southern Florida, most tropical fruit crops between Biscayne and Everglades National Parks are irrigated at rates and frequencies based on experience and observations of tree growth and fruit yield rather than on reliable quantitative information of actual water use. This approach suggests that irrigation rates may be excessive and could lead to leaching of agricultural chemicals into the groundwater in this environmentally sensitive area. Therefore, a study is being conducted to increase water use efficiency and optimize irrigation by accurately scheduling irrigation using a very effective management tool (EnviroScan, Sentek Environmental Innovations, Pty., Kent, Australia) that continuously monitors soil water content with highly accurate capacitance multi-sensor probes installed at several depths within the soil profile. The system measures crop water use by monitoring soil water depletion rates and allows the maintenance of soil water content within the optimum range (below field capacity and well above the onset of plant water stress). The study is being conducted in growers' orchards with three tropical fruit crops (avocado, carambola, and `Tahiti' lime) to facilitate rapid adoption and utilization of research results.


Sign in / Sign up

Export Citation Format

Share Document