scholarly journals Fall Detection Using Multiple Bioradars and Convolutional Neural Networks

Sensors ◽  
2019 ◽  
Vol 19 (24) ◽  
pp. 5569 ◽  
Author(s):  
Lesya Anishchenko ◽  
Andrey Zhuravlev ◽  
Margarita Chizh
Keyword(s):  
Wavelet Transform ◽  
Input Data ◽  
Detection Method ◽  
Fall Detection ◽  
Modern Medicine ◽  
Radar Signal ◽  
Continuous Wavelet ◽  
Time Frequency ◽  
Frequency Representation ◽  
Life Threatening

A lack of effective non-contact methods for automatic fall detection, which may result in the development of health and life-threatening conditions, is a great problem of modern medicine, and in particular, geriatrics. The purpose of the present work was to investigate the advantages of utilizing a multi-bioradar system in the accuracy of remote fall detection. The proposed concept combined usage of wavelet transform and deep learning to detect fall episodes. The continuous wavelet transform was used to get a time-frequency representation of the bio-radar signal and use it as input data for a pre-trained convolutional neural network AlexNet adapted to solve the problem of detecting falls. Processing of the experimental results showed that the designed multi-bioradar system can be used as a simple and view-independent approach implementing a non-contact fall detection method with an accuracy and F1-score of 99%.

An Adaptive Time–Frequency Representation and its Fast Implementation

2006 ◽  
Vol 129 (2) ◽  
pp. 169-178 ◽  
Author(s):  
Bao Liu ◽  
Sherman Riemenschneider ◽  
Zuowei Shen
Keyword(s):  
Fourier Transform ◽  
Wavelet Transform ◽  
Frequency Analysis ◽  
Continuous Wavelet Transform ◽  
Continuous Wavelet ◽  
Short Time Fourier Transform ◽  
Time Frequency ◽  
Frequency Representation ◽  
Adaptive Time ◽  
Short Time

This paper presents a fast adaptive time–frequency analysis method for dealing with the signals consisting of stationary components and transients, which are encountered very often in practice. It is developed based on the short-time Fourier transform but the window bandwidth varies along frequency adaptively. The method therefore behaves more like an adaptive continuous wavelet transform. We use B-splines as the window functions, which have near optimal time–frequency localization, and derive a fast algorithm for adaptive time–frequency representation. The method is applied to the analysis of vibration signals collected from rotating machines with incipient localized defects. The results show that it performs obviously better than the short-time Fourier transform, continuous wavelet transform, and several other most studied time–frequency analysis techniques for the given task.

scholarly journals Automatic ECG Classification Using Continuous Wavelet Transform and Convolutional Neural Network

Entropy ◽  
2021 ◽  
Vol 23 (1) ◽  
pp. 119
Author(s):  
Tao Wang ◽  
Changhua Lu ◽  
Yining Sun ◽  
Mei Yang ◽  
Chun Liu ◽  
...  
Keyword(s):  
Neural Network ◽  
Wavelet Transform ◽  
Convolutional Neural Network ◽  
Continuous Wavelet Transform ◽  
Continuous Wavelet ◽  
Time Frequency ◽  
Ecg Signals ◽  
Rr Interval ◽  
Frequency Components ◽  
Fully Connected

Early detection of arrhythmia and effective treatment can prevent deaths caused by cardiovascular disease (CVD). In clinical practice, the diagnosis is made by checking the electrocardiogram (ECG) beat-by-beat, but this is usually time-consuming and laborious. In the paper, we propose an automatic ECG classification method based on Continuous Wavelet Transform (CWT) and Convolutional Neural Network (CNN). CWT is used to decompose ECG signals to obtain different time-frequency components, and CNN is used to extract features from the 2D-scalogram composed of the above time-frequency components. Considering the surrounding R peak interval (also called RR interval) is also useful for the diagnosis of arrhythmia, four RR interval features are extracted and combined with the CNN features to input into a fully connected layer for ECG classification. By testing in the MIT-BIH arrhythmia database, our method achieves an overall performance of 70.75%, 67.47%, 68.76%, and 98.74% for positive predictive value, sensitivity, F1-score, and accuracy, respectively. Compared with existing methods, the overall F1-score of our method is increased by 4.75~16.85%. Because our method is simple and highly accurate, it can potentially be used as a clinical auxiliary diagnostic tool.

Classification of Sleep Stages Using Multi-wavelet Time Frequency Entropy and LDA

2010 ◽  
Vol 49 (03) ◽  
pp. 230-237 ◽  
Author(s):  
K. Lweesy ◽  
N. Khasawneh ◽  
M. Fraiwan ◽  
H. Wenz ◽  
H. Dickhaus ◽  
...  
Keyword(s):  
Feature Extraction ◽  
Wavelet Transform ◽  
Discriminant Analysis ◽  
Sleep Stage ◽  
Continuous Wavelet ◽  
Eeg Signal ◽  
Linear Discriminant ◽  
Time Frequency ◽  
Mother Wavelets ◽  
Sleep Stage Scoring

Summary Background: The process of automatic sleep stage scoring consists of two major parts: feature extraction and classification. Features are normally extracted from the polysomno-graphic recordings, mainly electroencephalograph (EEG) signals. The EEG is considered a non-stationary signal which increases the complexity of the detection of different waves in it. Objectives: This work presents a new technique for automatic sleep stage scoring based on employing continuous wavelet transform (CWT) and linear discriminant analysis (LDA) using different mother wavelets to detect different waves embedded in the EEG signal. Methods: The use of different mother wave-lets increases the ability to detect waves in the EEG signal. The extracted features were formed based on CWT time frequency entropy using three mother wavelets, and the classification was performed using the linear discriminant analysis. Thirty-two data sets from the MIT-BIH database were used to evaluate the performance of the proposed method. Results: Features of a single EEG signal were extracted successfully based on the time frequency entropy using the continuous wavelet transform with three mother wavelets. The proposed method has shown to outperform the classification based on a CWT using a single mother wavelet. The accuracy was found to be 0.84, while the kappa coefficient was 0.78. Conclusions: This work has shown that wavelet time frequency entropy provides a powerful tool for feature extraction for the non-stationary EEG signal; the accuracy of the classification procedure improved when using multiple wavelets compared to the use of single wavelet time frequency entropy.

scholarly journals Ground Penetrating Radar for Belowground Phenotyping of High-biomass Grasses for Soil Carbon Sequestration

2021 ◽  
Author(s):  
Matthew Wolfe ◽  
Da Huo ◽  
Henry Ruiz-Guzman ◽  
Brody Teare ◽  
Tyler Adams ◽  
...  
Keyword(s):  
Wavelet Transform ◽  
Continuous Wavelet Transform ◽  
Carbon Capture ◽  
Large Scale ◽  
Agricultural Practices ◽  
Signal Amplitude ◽  
Belowground Biomass ◽  
Continuous Wavelet ◽  
Time Frequency ◽  
Non Invasive

Abstract AimsMany governments and companies have committed to moving to net-zero emissions by 2030 or 2050 to tackle climate change, which require the development of new carbon capture and sequestration/storage (CCS) techniques. A proposed method of sequestration is to deposit carbon in soils as plant matter including root mass and root exudates. Adding perennial traits such as rhizomes to crops as part of a sequestration strategy would result in annual crop regrowth from rhizome meristems rather than requiring replanting from seeds which would in turn encourage no-till agricultural practices. Integrating these traits into productive agriculture requires a belowground phenotyping method compatible with high throughput breeding and selection methods (i.e., is rapid, inexpensive, reliable, and non-invasive), however none currently exist. MethodsGround penetrating radar (GPR) is a non-invasive subsurface sensing technology that shows potential as a phenotyping technique. In this study, a prototype GPR antenna array was used to scan roots of the perennial sorghum hybrid, PSH09TX15. A-scan level time-domain analyses and B-scan level time/frequency analyses using the continuous wavelet transform were utilized to extract features of interest from the acquired radargrams. ResultsOf six A-scan diagnostic indices examined, the standard deviation of signal amplitude correlated most significantly with belowground biomass. Time frequency analysis using the continuous wavelet transform yielded high correlations of B-scan features with belowground biomass. ConclusionThese results demonstrate that continued refinement of GPR data analysis workflows should yield a highly applicable phenotyping tool for breeding efforts in environments where selection is otherwise impractical on a large scale.

scholarly journals Application of Continuous Wavelet Transform and Convolutional Neural Network in Decoding Motor Imagery Brain-Computer Interface

Entropy ◽  
2019 ◽  
Vol 21 (12) ◽  
pp. 1199 ◽  
Author(s):  
Hyeon Kyu Lee ◽  
Young-Seok Choi
Keyword(s):  
Neural Network ◽  
Wavelet Transform ◽  
Convolutional Neural Network ◽  
Motor Imagery ◽  
Continuous Wavelet Transform ◽  
Brain Computer Interface ◽  
Classification Performance ◽  
Computer Interface ◽  
Continuous Wavelet ◽  
Time Frequency

The motor imagery-based brain-computer interface (BCI) using electroencephalography (EEG) has been receiving attention from neural engineering researchers and is being applied to various rehabilitation applications. However, the performance degradation caused by motor imagery EEG with very low single-to-noise ratio faces several application issues with the use of a BCI system. In this paper, we propose a novel motor imagery classification scheme based on the continuous wavelet transform and the convolutional neural network. Continuous wavelet transform with three mother wavelets is used to capture a highly informative EEG image by combining time-frequency and electrode location. A convolutional neural network is then designed to both classify motor imagery tasks and reduce computation complexity. The proposed method was validated using two public BCI datasets, BCI competition IV dataset 2b and BCI competition II dataset III. The proposed methods were found to achieve improved classification performance compared with the existing methods, thus showcasing the feasibility of motor imagery BCI.

scholarly journals Analysis of time-varying signals using continuous wavelet and synchrosqueezed transforms

2018 ◽  
Vol 376 (2126) ◽  
pp. 20170254 ◽  
Author(s):  
Jean Baptiste Tary ◽  
Roberto Henry Herrera ◽  
Mirko van der Baan
Keyword(s):  
Wavelet Transform ◽  
Continuous Wavelet Transform ◽  
Seismic Signal ◽  
American Football ◽  
Frequency Resolution ◽  
Time Varying ◽  
Continuous Wavelet ◽  
Time Frequency ◽  
Frequency Information ◽  
Synchrosqueezing Transform

The continuous wavelet transform (CWT) has played a key role in the analysis of time-frequency information in many different fields of science and engineering. It builds on the classical short-time Fourier transform but allows for variable time-frequency resolution. Yet, interpretation of the resulting spectral decomposition is often hindered by smearing and leakage of individual frequency components. Computation of instantaneous frequencies, combined by frequency reassignment, may then be applied by highly localized techniques, such as the synchrosqueezing transform and ConceFT, in order to reduce these effects. In this paper, we present the synchrosqueezing transform together with the CWT and illustrate their relative performances using four signals from different fields, namely the LIGO signal showing gravitational waves, a ‘FanQuake’ signal displaying observed vibrations during an American football game, a seismic recording of the M w 8.2 Chiapas earthquake, Mexico, of 8 September 2017, followed by the Irma hurricane, and a volcano-seismic signal recorded at the Popocatépetl volcano showing a tremor followed by harmonic resonances. These examples illustrate how high-localization techniques improve analysis of the time-frequency information of time-varying signals. This article is part of the theme issue ‘Redundancy rules: the continuous wavelet transform comes of age’.

scholarly journals Time-frequency analysis of the Surge Onset in the Centrifugal Blower

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Grzegorz Liskiewicz ◽  
Longin Horodko
Keyword(s):  
Wavelet Transform ◽  
Frequency Analysis ◽  
Continuous Wavelet Transform ◽  
Working Condition ◽  
Continuous Wavelet ◽  
Transient Phase ◽  
Centrifugal Blower ◽  
Time Frequency Analysis ◽  
Time Frequency ◽  
Pressure Signal

Abstract Time frequency analysis of the surge onset was performed in the centrifugal blower. A pressure signal was registered at the blower inlet, outlet and three locations at the impeller shroud. The time-frequency scalograms were obtained by means of the Continuous Wavelet Transform (CWT). The blower was found to successively operate in four different conditions: stable working condition, inlet recirculation, transient phase and deep surge. Scalograms revealed different spectral structures of aforementioned phases and suggest possible ways of detecting the surge predecessors.

A NOVEL R-PEAK DETECTION METHOD COMBINING ENERGY AND WAVELET TRANSFORM IN ELECTROCARDIOGRAM SIGNAL

2014 ◽  
Vol 26 (01) ◽  
pp. 1450007 ◽  
Author(s):  
Xiuling Liu ◽  
Jianli Yang ◽  
Xiaoyu Zhu ◽  
Suiping Zhou ◽  
Hongrui Wang ◽  
...  
Keyword(s):  
Wavelet Transform ◽  
Detection Method ◽  
Peak Detection ◽  
Frequency Resolution ◽  
Detection Accuracy ◽  
Energy Window ◽  
Qrs Complex ◽  
Time Frequency ◽  
Qrs Morphology ◽  
Morphology Changes

QRS complex is the most important part in electrocardiogram (ECG) as it contains the most important information of heart activities. R-peak detection is the first, yet crucial, step in most ECG automatic diagnose methods. Due to the existence of noise in ECG signals and changes in QRS morphology, most existing methods are not robust in different conditions. In the field of intelligent remote health caring, in addition to the detection accuracy, timeliness is also an important research issue. In this paper, wavelet transform and energy window transform are introduced, which form the basis of a novel R-peak detection method. Wavelet transform is used to efficiently reduce noise and highlight useful ECG signal for it has good time-frequency resolution characters, and energy window transform converts time domain signal to energy domain, which makes it easier to isolate QRS complex from other signals. As a result, influence from QRS morphology changes can be effectively alleviated. To validate the effectiveness of this new method, ECG records of MIT-BIH arrhythmia database are used in the experiments. The experiment results show that the proposed method is efficient and robust to noise and QRS morphology changes. The computational cost of the proposed method has also been evaluated.

Sign in / Sign up

Export Citation Format

Share Document