scholarly journals The Design and Optimization of a Compressive-Type Vector Sensor Utilizing a PMN-28PT Piezoelectric Single-Crystal

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5155
Author(s):  
Hong Goo Yeo ◽  
Junhee Choi ◽  
Changzhu Jin ◽  
Seonghun Pyo ◽  
Yongrae Roh ◽  
...  
Keyword(s):  
Single Crystal ◽  
Single Crystals ◽  
Axial Vector ◽  
Geometric Optimization ◽  
Voltage Sensitivity ◽  
Element Analysis ◽  
Design And Optimization ◽  
Seismic Mass ◽  
Vector Sensor ◽  
Dipole Pattern

Underwater sensors that detect the distance and direction of acoustic sources are critical for surveillance monitoring and target detection in the water. Here, we propose an axial vector sensor that utilizes a small (~1 cm3) compressive-type piezoelectric accelerometer using piezoelectric single crystals. Initially, finite element analysis (FEA) was used to optimize the structure that comprised piezoelectric Pb(Mb1/3Nb2/3)O3-28%PbTiO3 single crystals on a tungsten seismic mass. The receiving voltage sensitivity (RVS) was enhanced through geometric optimization of the thickness and sensing area of the piezoelectric material and the seismic mass. The estimated maximum RVS of the optimized vector sensor was −212 dB. FEA simulations and practical measurements were used to verify the directivity of the vector sensor design, which exhibited a dipole pattern. The dipole beam pattern was used to obtain cardioid patterns using the simulated and measured results for comparison. The results clearly showed the feasibility of using the proposed piezoelectric single-crystal accelerometer for a compressive-type vector sensor.

Design and Optimization of Mechanically Resonant Torsional Spring Mechanism for Laser Light Dispersion Applications

2011 ◽  
Vol 133 (1) ◽  
Author(s):  
Loke Kean Koay ◽  
Horizon Gitano-Briggs
Keyword(s):  
Laser Light ◽  
Geometric Optimization ◽  
Geometrical Parameters ◽  
Analysis Model ◽  
Original Design ◽  
Element Analysis ◽  
Design And Optimization ◽  
Torsional Spring ◽  
The Finite Element Analysis ◽  
Spring Mechanism

A laser light scanning device consisting of an electronically driven mechanically resonant torsional spring-mirror system was developed for display applications. The original design suffers fatigue failure due to the repeated rotation of the torsional spring. The torsional spring design is investigated and analyzed to attain the lowest possible stress level while maintaining a constant resonant frequency. The finite element analysis model of the torsional spring was created and the stress was minimized by changing the geometrical parameters of the spring. Spring geometric optimization resulted in a maximum stress of 0.632 GPa, that is 12% reduction in stress from the original design, which should give an extended life span of 1 month for the intended application.

scholarly journals A miniaturized acoustic vector sensor with PIN-PMN-PT single crystal cantilever beam accelerometers

Acta Acustica ◽  
2020 ◽  
Vol 4 (5) ◽  
pp. 17
Author(s):  
Yohan Cho ◽  
Yub Je ◽  
Weui-Bong Jeong
Keyword(s):  
Single Crystal ◽  
Cantilever Beam ◽  
Piezoelectric Materials ◽  
Signal To Noise Ratio ◽  
Voltage Sensitivity ◽  
Acoustic Vector Sensor ◽  
Vector Sensor ◽  
Line Array ◽  
Highly Sensitive ◽  
Vector Sensors

Directional sound detection using vector sensors rather than large hydrophone arrays is highly advantageous for target detection in SONAR. However, developing highly sensitive and compact vector sensors for use in a system whose size is limited has been a challenging issue. In this paper, we describe a miniaturized acoustic vector sensor with piezoelectric single crystal accelerometers for the application in towed line arrays. A mass-loaded cantilever beam accelerometer with a [011] poled PIN-PMN-PT single crystal shows a better signal-to-noise ratio compared to accelerometers with other piezoelectric materials because of its superior piezoelectric properties in the 32 direction. We suggested a sufficiently compact vector sensor by using a cylindrical hydrophone with 10 mm in diameter as a housing of the single crystal accelerometers. Two single crystal accelerometers were orthogonally mounted inside the cylindrical hydrophone to detect direction of sound in the transverse plane of the line array. The receiving voltage sensitivity of the accelerometers and hydrophone was −199 and −196 dB, respectively, at 3 kHz. The directional cardioid beams generated by summing the omnidirectional beam from the hydrophone and the dipole beam from the accelerometers were validated over the entire operating frequency.

The Effective Electromechanical Moduli of Domain Engineered Ferroelectric Crystals

Aerospace ◽  
2003 ◽  
Author(s):  
Jiangyu Li ◽  
Dan Liu
Keyword(s):  
Single Crystal ◽  
Single Crystals ◽  
Electromechanical Coupling ◽  
Fundamental Property ◽  
Homogenization Theory ◽  
Optimal Domain ◽  
Design And Optimization ◽  
Domain Configuration ◽  
Ferroelectric Single Crystal ◽  
Minimization Approach

We present a micromechanical analysis to explain the enhanced electromechanical coupling of domain engineered ferroelectric single crystals. The theory starts with energy-minimization approach, where the energy minimizing domain configurations are characterized as the convex hull of the ferroelectric energy wells, and are constructed by multi-rank laminations. The electromechanical moduli of ferroelectric single crystal with engineered domain configuration can then be determined by the homogenization theory. Using this approach, we analyzed the engineered domain configuration in tetragonal single crystal BaTiO3 poled in <111> direction, where d33 70% higher than those poled in <001> direction has been demonstrated, consistent with experimental observation. It is also found that the two-variant domain configurations have higher enhancement than three-variant systems, suggesting an optimal domain configuration for the enhanced piezoelectric properties. The theory reveals the fundamental property enhancement mechanism in ferroelectric single crystals with engineered domain configuration, and offers insight on the design and optimization of ferroelectric single crystals with superior functional properties.

The observation of defects on (100) CdTe surfaces by chemical etching

1992 ◽  
Vol 50 (2) ◽  
pp. 1424-1425
Author(s):  
M.E. Lee
Keyword(s):  
Single Crystal ◽  
Grain Boundaries ◽  
Single Crystals ◽  
Chemical Etching ◽  
Crystalline Perfection ◽  
Crystalline Defects ◽  
High Incidence ◽  
Crystallographic Defects ◽  
Cdznte Substrates ◽  
Device Technology

The crystalline perfection of bulk CdTe substrates plays an important role in their use in infrared device technology. The application of chemical etchants to determine crystal polarity or the density and distribution of crystallographic defects in (100) CdTe is not well understood. The lack of data on (100) CdTe surfaces is a result of the apparent difficulty in growing (100) CdTe single crystal substrates which is caused by a high incidence of twinning. Many etchants have been reported to predict polarity on one or both (111) CdTe planes but are considered to be unsuitable as defect etchants. An etchant reported recently has been considered to be a true defect etchant for CdTe, MCT and CdZnTe substrates. This etchant has been reported to reveal crystalline defects such as dislocations, grain boundaries and inclusions in (110) and (111) CdTe. In this study the effect of this new etchant on (100) CdTe surfaces is investigated.The single crystals used in this study were (100) CdTe as-cut slices (1mm thickness) from Bridgman-grown ingots.

Mounting an individual submicrometer sized single crystal

1996 ◽  
Vol 211 (6) ◽  
Author(s):  
R. B. Neder ◽  
M. Burghammer ◽  
Th. Grasl ◽  
H. Schulz
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Single Crystal ◽  
Single Crystals ◽  
High Vacuum ◽  
Nanometer Resolution ◽  
Micro Manipulator ◽  
Scanning Electron

AbstractWe developed a new micro manipulator for mounting individual sub-micrometer sized single crystals within a scanning electron microscope. The translations are realized via a commercially available piezomicroscope, adapted for high vacuum usage and realize nanometer resolution. With this novel instrument it is routinely possible to mount individual single crystals with sizes down to 0.1

Study of potential oscillations during reaction of an aluminium single crystal with an aqueous KOH solution

1990 ◽  
Vol 55 (2) ◽  
pp. 345-353 ◽  
Author(s):  
Ivan Halaša ◽  
Milica Miadoková
Keyword(s):  
Aqueous Solutions ◽  
Single Crystal ◽  
Single Crystals ◽  
Periodic Potential ◽  
Optimum Conditions ◽  
Potential Oscillations ◽  
Dilute Aqueous Solutions ◽  
Experimental Findings ◽  
Kinetics Of

The authors investigated periodic potential changes measured on oriented sections of Al single crystals during spontaneous dissolution in dilute aqueous solutions of KOH, with the aim to find optimum conditions for the formation of potential oscillations. It was found that this phenomenon is related with the kinetics of the reaction investigated, whose rate also changed periodically. The mechanism of the oscillations is discussed in view of the experimental findings.

Measurement of growth rates for single crystals and pressed tablets of CuSO4.5 H2O on a rotating disc

1989 ◽  
Vol 54 (11) ◽  
pp. 2951-2961 ◽  
Author(s):  
Miloslav Karel ◽  
Jaroslav Nývlt
Keyword(s):  
Growth Rate ◽  
Single Crystal ◽  
Single Crystals ◽  
Growth Rates ◽  
Diffusion Coefficients ◽  
Preferred Orientation ◽  
Rotating Disc ◽  
Dissolution Rates ◽  
Rates Of Growth ◽  
Good Agreement

Measured growth and dissolution rates of single crystals and tablets were used to calculate the overall linear rates of growth and dissolution of CuSO4.5 H2O crystals. The growth rate for the tablet is by 20% higher than that calculated for the single crystal. It has been concluded that this difference is due to a preferred orientation of crystal faces on the tablet surface. Calculated diffusion coefficients and thicknesses of the diffusion and hydrodynamic layers in the vicinity of the growing or dissolving crystal are in good agreement with published values.

scholarly journals Single Crystal Growth and Physical Properties of Pyroxene CoGeO3

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 378
Author(s):  
Li Zhao ◽  
Zhiwei Hu ◽  
Hanjie Guo ◽  
Christoph Geibel ◽  
Hong-Ji Lin ◽  
...  
Keyword(s):  
High Pressure ◽  
Magnetic Properties ◽  
Magnetic Susceptibility ◽  
Crystal Growth ◽  
Physical Properties ◽  
Single Crystal ◽  
Single Crystals ◽  
Magnetic Moments ◽  
Single Crystal Growth ◽  
The Impact

We report on the synthesis and physical properties of cm-sized CoGeO3 single crystals grown in a high pressure mirror furnace at pressures of 80 bar. Direction dependent magnetic susceptibility measurements on our single crystals reveal highly anisotropic magnetic properties that we attribute to the impact of strong single ion anisotropy appearing in this system with TN∼33.5 K. Furthermore, we observe effective magnetic moments that are exceeding the spin only values of the Co ions, which reveals the presence of sizable orbital moments in CoGeO3.

scholarly journals Growth of sillenite Bi12FeO20 single crystals: structural, thermal, optical, photocatalytic features and first principle calculations

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Durga Sankar Vavilapalli ◽  
Ambrose A. Melvin ◽  
F. Bellarmine ◽  
Ramanjaneyulu Mannam ◽  
Srihari Velaga ◽  
...  
Keyword(s):  
Single Crystal ◽  
Single Crystals ◽  
Photoelectron Spectroscopy ◽  
Diffraction Method ◽  
Lattice Parameter ◽  
First Principle ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Principle Calculations ◽  
Photodegradation Efficiency

AbstractIdeal sillenite type Bi12FeO20 (BFO) micron sized single crystals have been successfully grown via inexpensive hydrothermal method. The refined single crystal X-ray diffraction data reveals cubic Bi12FeO20 structure with single crystal parameters. Occurrence of rare Fe4+ state is identified via X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS). The lattice parameter (a) and corresponding molar volume (Vm) of Bi12FeO20 have been measured in the temperature range of 30–700 °C by the X-ray diffraction method. The thermal expansion coefficient (α) 3.93 × 10–5 K−1 was calculated from the measured values of the parameters. Electronic structure and density of states are investigated by first principle calculations. Photoelectrochemical measurements on single crystals with bandgap of 2 eV reveal significant photo response. The photoactivity of as grown crystals were further investigated by degrading organic effluents such as Methylene blue (MB) and Congo red (CR) under natural sunlight. BFO showed photodegradation efficiency about 74.23% and 32.10% for degrading MB and CR respectively. Interesting morphology and microstructure of pointed spearhead like BFO crystals provide a new insight in designing and synthesizing multifunctional single crystals.

scholarly journals Modeling of magneto-conductivity of bismuth selenide: a topological insulator

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Yogesh Kumar ◽  
Rabia Sultana ◽  
Prince Sharma ◽  
V. P. S. Awana
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Single Crystal ◽  
Single Crystals ◽  
X Ray Diffraction ◽  
Field Range ◽  
X Ray ◽  
Bulk Carriers ◽  
Different Temperatures

AbstractWe report the magneto-conductivity analysis of Bi2Se3 single crystal at different temperatures in a magnetic field range of ± 14 T. The single crystals are grown by the self-flux method and characterized through X-ray diffraction, Scanning Electron Microscopy, and Raman Spectroscopy. The single crystals show magnetoresistance (MR%) of around 380% at a magnetic field of 14 T and a temperature of 5 K. The Hikami–Larkin–Nagaoka (HLN) equation has been used to fit the magneto-conductivity (MC) data. However, the HLN fitted curve deviates at higher magnetic fields above 1 T, suggesting that the role of surface-driven conductivity suppresses with an increasing magnetic field. This article proposes a speculative model comprising of surface-driven HLN and added quantum diffusive and bulk carriers-driven classical terms. The model successfully explains the MC of the Bi2Se3 single crystal at various temperatures (5–200 K) and applied magnetic fields (up to 14 T).

Sign in / Sign up

Export Citation Format

Share Document