scholarly journals Coherent Optical Transduction of Suspended Microcapillary Resonators for Multi-Parameter Sensing Applications

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5069 ◽  
Author(s):  
Martín-Pérez ◽  
Ramos ◽  
Tamayo ◽  
Calleja
Keyword(s):  
Real Time ◽  
Coming Out ◽  
Fused Silica ◽  
High Mass ◽  
Nanomechanical Resonator ◽  
Mechanical Displacement ◽  
Mass Sensitivity ◽  
Sensing Applications ◽  
Wide Range ◽  
Displacement Sensitivity

Characterization of micro and nanoparticle mass has become increasingly relevant in a wide range of fields, from materials science to drug development. The real-time analysis of complex mixtures in liquids demands very high mass sensitivity and high throughput. One of the most promising approaches for real-time measurements in liquid, with an excellent mass sensitivity, is the use of suspended microchannel resonators, where a carrier liquid containing the analytes flows through a nanomechanical resonator while tracking its resonance frequency shift. To this end, an extremely sensitive mechanical displacement technique is necessary. Here, we have developed an optomechanical transduction technique to enhance the mechanical displacement sensitivity of optically transparent hollow nanomechanical resonators. The capillaries have been fabricated by using a thermal stretching technique, which allows to accurately control the final dimensions of the device. We have experimentally demonstrated the light coupling into the fused silica capillary walls and how the evanescent light coming out from the silica interferes with the surrounding electromagnetic field distribution, a standing wave sustained by the incident laser and the reflected power from the substrate, modulating the reflectivity. The enhancement of the displacement sensitivity due to this interferometric modulation (two orders of magnitude better than compared with previous accomplishments) has been theoretically predicted and experimentally demonstrated.

Mass Detection With Nonlinear Nanomechanical Resonators

2008 ◽  
Author(s):  
Eyal Buks
Keyword(s):  
Output Signal ◽  
Nonlinear Oscillations ◽  
Small Mass ◽  
High Mass ◽  
Mass Detection ◽  
Detection Scheme ◽  
Nanomechanical Resonator ◽  
Nanomechanical Resonators ◽  
Mass Sensitivity ◽  
Damping Rate

Nanomechanical resonators having small mass, high resonance frequency and low damping rate are widely employed as mass detectors. We study the performance of such a detector when the resonator is driven into a region of nonlinear oscillations [1]. We predict theoretically that the mass sensitivity of the device in this region may exceed the upper bound imposed by thermo-mechanical noise upon the sensitivity when operating in the linear region. On the other hand, we find that the high mass sensitivity is accompanied by a slow response of the system to a change in the mass. For experimental demonstration we employ homodyne detection (see Fig. 1) for readout of the output signal of an optical displacement detector, which monitors the motion of a doubly clamped nanomechanical resonator made of Pd-Au [2, 3]. The nanomechanical resonator is driven into the region of nonlinear oscillations (see Fig. 2) and the region of bistability is identified (see Fig. 3). As expected theoretically [1] we find that when operating close to the edge of the bistability region the device exhibits strong intermodulation amplification [2] (see Fig. 3). Moreover, strong noise squeezing in the output signal of the homodyne detector is observed in this region [3] (see Fig. 4). An alternative mass detection scheme, in which the resonator is driven into a stochastic resonance, will also be discussed [4].

Global Optimal Design of Nanomechanical Resonators

2013 ◽  
Author(s):  
Sung K. Koh ◽  
Yong Chul Kim
Keyword(s):  
Optimal Design ◽  
Fundamental Frequency ◽  
Design Problem ◽  
Optimal Solution ◽  
High Mass ◽  
Cross Sectional ◽  
Nanomechanical Resonator ◽  
Nanomechanical Resonators ◽  
Mass Sensitivity ◽  
Global Optimal

Novel nanomechanical resonators with high mass sensitivities are designed in an optimal manner. We are concerned with a nanomechanical resonator with step changes in cross section and determine its geometry so as to maximize its mass sensitivity. Since the mass sensitivity is proportional to the fundamental frequency, we decide the geometric shape so as to maximize the fundamental frequency. In particular, we design a cantilever resonator with a single discontinuity in its cross sectional area. As the design space of this design problem is decided by the volume of the resonator, we synthesize it for various prescribed volume constraints. The fundamental frequency is estimated based on the Euler-Bernoulli beam theory. We discovered that there is a unique global optimal solution of this design problem that does not depend on the given volume constraints. The mass sensitivity of optimally designed cantilever resonators is 1.9193 times greater than that of conventional uniform beam type resonators that are designed for the same volume. Consequently, the mass sensitivity of a nanomechanical uniform resonator of constant volume can always be enhanced without regard to its global size by modifying its geometry following the optimal design proposed in this paper.

scholarly journals Strain Sensor via Wood Anomalies in 2D Dielectric Array

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1022
Author(s):  
Rashid G. Bikbaev ◽  
Ivan V. Timofeev ◽  
Vasiliy F. Shabanov
Keyword(s):  
Higher Plants ◽  
Numerical Study ◽  
Reciprocal Lattice ◽  
Strain Sensing ◽  
Photonic Materials ◽  
Sensing Applications ◽  
Wide Range ◽  
Sensor Structure ◽  
Optical Behavior ◽  
Chlorophyll Absorption

Optical sensing is one of many promising applications for all-dielectric photonic materials. Herein, we present an analytical and numerical study on the strain-responsive spectral properties of a bioinspired sensor. The sensor structure contains a two-dimensional periodic array of dielectric nanodisks to mimic the optical behavior of grana lamellae inside chloroplasts. To accumulate a noticeable response, we exploit the collective optical mode in grana ensemble. In higher plants, such a mode appears as Wood’s anomaly near the chlorophyll absorption line to control the photosynthesis rate. The resonance is shown persistent against moderate biological disorder and deformation. Under the stretching or compression of a symmetric structure, the mode splits into a couple of polarized modes. The frequency difference is accurately detected. It depends on the stretch coefficient almost linearly providing easy calibration of the strain-sensing device. The sensitivity of the considered structure remains at 5 nm/% in a wide range of strain. The influence of the stretching coefficient on the length of the reciprocal lattice vectors, as well as on the angle between them, is taken into account. This adaptive phenomenon is suggested for sensing applications in biomimetic optical nanomaterials.

scholarly journals Femtosecond Laser Fabrication of Hybrid Metal-Dielectric Structures with Nonlinear Photoluminescence

Photonics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 121
Author(s):  
Ekaterina Ponkratova ◽  
Eduard Ageev ◽  
Filipp Komissarenko ◽  
Sergei Koromyslov ◽  
Dmitry Kudryashov ◽  
...  
Keyword(s):  
Visible Spectral Region ◽  
Single Step ◽  
Hybrid Nanostructures ◽  
Nonlinear Properties ◽  
Nanophotonic Devices ◽  
Sensing Applications ◽  
Structure Morphology ◽  
Wide Range ◽  
Nonlinear Signal ◽  
Dielectric Structures

Fabrication of hybrid micro- and nanostructures with a strong nonlinear response is challenging and represents a great interest due to a wide range of photonic applications. Usually, such structures are produced by quite complicated and time-consuming techniques. This work demonstrates laser-induced hybrid metal-dielectric structures with strong nonlinear properties obtained by a single-step fabrication process. We determine the influence of several incident femtosecond pulses on the Au/Si bi-layer film on produced structure morphology. The created hybrid systems represent isolated nanoparticles with a height of 250–500 nm exceeding the total thickness of the Au-Si bi-layer. It is shown that fabricated hybrid nanostructures demonstrate enhancement of the SHG signal (up to two orders of magnitude) compared to the initial planar sample and a broadband photoluminescence signal (more than 200 nm in width) in the visible spectral region. We establish the correlation between nonlinear signal and phase composition provided by Raman scattering measurements. Such laser-induced structures have significant potential in optical sensing applications and can be used as components for different nanophotonic devices.

scholarly journals A Nanoplasmonic-Based Biosensing Approach for Wide-Range and Highly Sensitive Detection of Chemicals

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1961
Author(s):  
Francesco Arcadio ◽  
Luigi Zeni ◽  
Aldo Minardo ◽  
Caterina Eramo ◽  
Stefania Di Di Ronza ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Limit Of Detection ◽  
Slab Waveguide ◽  
Grating Pattern ◽  
Transparent Substrate ◽  
Synthetic Receptor ◽  
Sensing Applications ◽  
Wide Range ◽  
Plastic Optical Fibers ◽  
Highly Sensitive Detection

In a specific biosensing application, a nanoplasmonic sensor chip has been tested by an experimental setup based on an aluminum holder and two plastic optical fibers used to illuminate and collect the transmitted light. The studied plasmonic probe is based on gold nanograting, realized on the top of a Poly(methyl methacrylate) (PMMA) chip. The PMMA substrate could be considered as a transparent substrate and, in such a way, it has been already used in previous work. Alternatively, here it is regarded as a slab waveguide. In particular, we have deposited upon the slab surface, covered with a nanograting, a synthetic receptor specific for bovine serum albumin (BSA), to test the proposed biosensing approach. Exploiting this different experimental configuration, we have determined how the orientation of the nanostripes forming the grating pattern, with respect to the direction of the input light (longitudinal or orthogonal), influences the biosensing performances. For example, the best limit of detection (LOD) in the BSA detection that has been obtained is equal to 23 pM. Specifically, the longitudinal configuration is characterized by two observable plasmonic phenomena, each sensitive to a different BSA concentration range, ranging from pM to µM. This aspect plays a key role in several biochemical sensing applications, where a wide working range is required.

scholarly journals Wide range and highly linear signal processed systematic humidity sensor array using Methylene Blue and Graphene composite

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Umair Khan ◽  
Gul Hassan ◽  
Rayyan Ali Shaukat ◽  
Qazi Muhammad Saqib ◽  
Mahesh Y. Chougale ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Linear Combination ◽  
Linear Function ◽  
Humidity Sensor ◽  
Sensor Array ◽  
Combination Method ◽  
Humidity Sensing ◽  
Sensing Applications ◽  
Wide Range ◽  
Graphene Flakes

AbstractThis paper proposes a signal processed systematic 3 × 3 humidity sensor array with all range and highly linear humidity response based on different particles size composite inks and different interspaces of interdigital electrodes (IDEs). The fabricated sensors are patterned through a commercial inkjet printer and the composite of Methylene Blue and Graphene with three different particle sizes of bulk Graphene Flakes (BGF), Graphene Flakes (GF), and Graphene Quantum Dots (GQD), which are employed as an active layer using spin coating technique on three types of IDEs with different interspaces of 300, 200, and 100 µm. All range linear function (0–100% RH) is achieved by applying the linear combination method of nine sensors in the signal processing field, where weights for linear combination are required, which are estimated by the least square solution. The humidity sensing array shows a fast response time (Tres) of 0.2 s and recovery time (Trec) of 0.4 s. From the results, the proposed humidity sensor array opens a new gateway for a wide range of humidity sensing applications with a linear function.

A New Flexible Rapid Thermal Processing System

1995 ◽  
Vol 389 ◽  
Author(s):  
K. C. Saraswat ◽  
Y. Chen ◽  
L. Degertekin ◽  
B. T. Khuri-Yakub
Keyword(s):  
Control System ◽  
Real Time ◽  
Processing System ◽  
Process Conditions ◽  
Temperature Uniformity ◽  
Real Time Control ◽  
Wafer Temperature ◽  
Time Control ◽  
Wide Range ◽  
Optical Flux

ABSTRACTA highly flexible Rapid Thermal Multiprocessing (RTM) reactor is described. This flexibility is the result of several new innovations: a lamp system, an acoustic thermometer and a real-time control system. The new lamp has been optimally designed through the use of a “virtual reactor” methodology to obtain the best possible wafer temperature uniformity. It consists of multiple concentric rings composed of light bulbs with horizontal filaments. Each ring is independently and dynamically controlled providing better control over the spatial and temporal optical flux profile resulting in excellent temperature uniformity over a wide range of process conditions. An acoustic thermometer non-invasively allows complete wafer temperature tomography under all process conditions - a critically important measurement never obtained before. For real-time equipment and process control a model based multivariable control system has been developed. Extensive integration of computers and related technology for specification, communication, execution, monitoring, control, and diagnosis demonstrates the programmability of the RTM.

scholarly journals Distributed X-ray photon correlation spectroscopy data reduction using Hadoop MapReduce

2018 ◽  
Vol 25 (4) ◽  
pp. 1135-1143 ◽  
Author(s):  
Faisal Khan ◽  
Suresh Narayanan ◽  
Roger Sersted ◽  
Nicholas Schwarz ◽  
Alec Sandy
Keyword(s):  
Real Time ◽  
Photon Correlation Spectroscopy ◽  
Correlation Spectroscopy ◽  
Frame Rate ◽  
Computational Techniques ◽  
Complex Materials ◽  
Photon Correlation ◽  
X Ray ◽  
Wide Range ◽  
Recent Developments

Multi-speckle X-ray photon correlation spectroscopy (XPCS) is a powerful technique for characterizing the dynamic nature of complex materials over a range of time scales. XPCS has been successfully applied to study a wide range of systems. Recent developments in higher-frame-rate detectors, while aiding in the study of faster dynamical processes, creates large amounts of data that require parallel computational techniques to process in near real-time. Here, an implementation of the multi-tau and two-time autocorrelation algorithms using the Hadoop MapReduce framework for distributed computing is presented. The system scales well with regard to the increase in the data size, and has been serving the users of beamline 8-ID-I at the Advanced Photon Source for near real-time autocorrelations for the past five years.

Case Study- Real Time Downhole Telemetry CCL and Tension Compression, a Differentiator for Successful Manipulation of ICD's in Horizontal Wells

2021 ◽  
Author(s):  
Usman Ahmed ◽  
Zhiheng Zhang ◽  
Ruben Ortega Alfonzo
Keyword(s):  
Saudi Arabia ◽  
Real Time ◽  
Oil Recovery ◽  
Horizontal Wells ◽  
Differential Pressure ◽  
Successful Operation ◽  
Coiled Tubing ◽  
Electric Line ◽  
Wide Range ◽  
Ict System

Abstract Horizontal well completions are often equipped with Inflow Control Devices (ICDs) to optimize flow rates across the completion for the whole length of the interval and to increase the oil recovery. The ICD technology has become useful method of optimizing production from horizontal wells in a wide range of applications. It has proved to be beneficial in horizontal water injectors and steam assisted gravity drainage wells. Traditionally the challenges related to early gas or water breakthrough were dealt with complex and costly workover/intervention operations. ICD manipulation used to be done with down-hole tractor conveyed using an electric line (e-line) cable or by utilization of a conventional coiled tubing (CT) string. Wellbore profile, high doglegs, tubular ID, drag and buoyancy forces added limitations to the e-line interventions even with the use of tractor. Utilization of conventional CT string supplement the uncertainties during shifting operations by not having the assurance of accurate depth and forces applied downhole. A field in Saudi Arabia is completed with open-hole packer with ICD completion system. The excessive production from the wells resulted in increase of water cut, hence ICD's shifting was required. As operations become more complex due to fact that there was no mean to assure that ICD is shifted as needed, it was imperative to find ways to maximize both assurance and quality performance. In this particular case, several ICD manipulating jobs were conducted in the horizontal wells. A 2-7/8-in intelligent coiled tubing (ICT) system was used to optimize the well intervention performance by providing downhole real-time feedback. The indication for the correct ICD shifting was confirmed by Casing Collar Locator (CCL) and Tension & Compression signatures. This paper will present the ICT system consists of a customized bottom-hole assembly (BHA) that transmits Tension, compression, differential pressure, temperature and casing collar locator data instantaneously to the surface via a nonintrusive tube wire installed inside the coiled tubing. The main advantages of the ICT system in this operation were: monitoring the downhole force on the shifting tool while performing ICD manipulation, differential pressure, and accurately determining depth from the casing collar locator. Based on the known estimated optimum working ranges for ICD shifting and having access to real-time downhole data, the operator could decide that required force was transmitted to BHA. This bring about saving job time while finding sleeves, efficient open and close of ICD via applying required Weight on Bit (WOB) and even providing a mean to identify ICD that had debris accumulation. The experience acquired using this method in the successful operation in Saudi Arabia yielded recommendations for future similar operations.

Sign in / Sign up

Export Citation Format

Share Document