scholarly journals Comparative Analysis between Error-State and Full-State Error Estimation for KF-Based IMU/GNSS Integration against IMU Faults

Sensors ◽  
2019 ◽  
Vol 19 (22) ◽  
pp. 4912 ◽  
Author(s):  
Wei Liu ◽  
Dan Song ◽  
Zhipeng Wang ◽  
Kun Fang
Keyword(s):  
Satellite System ◽  
Position Estimation ◽  
Measurement Unit ◽  
Multisensor Systems ◽  
System Integrity ◽  
Full State ◽  
Tightly Coupled ◽  
Integrity Assurance ◽  
Error State ◽  
State Error

Considering the inertial measurement unit (IMU) faults risk of an unmanned aerial vehicle (UAV), this paper provides an analysis of the error overboundings of position estimation in a tightly coupled IMU/global navigation satellite system (GNSS) integrated architecture under the IMU fault conditions using an error-state EKF-based approach and provides a comparison to a recently published EKF-based full state method. Simulation results show that both the error overboundings of the error-state and full-state EKFs can fit the state error against the IMU faults, but the error-state EKF is more suitable for UAV navigation system integrity assurance due to its higher calculation effciency. This study will be extended to the integrity monitoring of multisensor systems.

scholarly journals A Robust Adaptive Cubature Kalman Filter Based on SVD for Dual-Antenna GNSS/MIMU Tightly Coupled Integration

2021 ◽  
Vol 13 (10) ◽  
pp. 1943
Author(s):  
Cheng Pan ◽  
Nijia Qian ◽  
Zengke Li ◽  
Jingxiang Gao ◽  
Zhenbin Liu ◽  
...  
Keyword(s):  
Parameter Estimation ◽  
Kalman Filter ◽  
Satellite System ◽  
Integrated System ◽  
Measurement Unit ◽  
Attitude Angle ◽  
Cubature Kalman Filter ◽  
Tightly Coupled ◽  
Heading Angle ◽  
Robust Adaptive

In complex urban environments, a single Global Navigation Satellite System (GNSS) is often not ideal for navigation due to a lack of sufficient visible satellites. Additionally, the heading angle error of a GNSS/micro-electro-mechanical system–grade inertial measurement unit (MIMU) tightly coupled integration based on the single antenna is large, and the attitude angle, velocity, and position calculated therein all have large errors. Considering the above problems, this paper designs a tightly coupled integration of GNSS/MIMU based on two GNSS antennas and proposes a singular value decomposition (SVD)-based robust adaptive cubature Kalman filter (SVD-RACKF) according to the model characteristics of the integration. In this integration, the high-accuracy heading angle of the carrier is obtained through two antennas, and the existing attitude angle information is used as the observation to constrain the filtering estimation. The proposed SVD-RACKF uses SVD to stabilize the numerical accuracy of the recursive filtering. Furthermore, the three-stage equivalent weight function and the adaptive adjustment factor are constructed to suppress the influence of the gross error and the abnormal state on the parameter estimation, respectively. A set of real measured data was employed for testing and analysis. The results show that dual antennas and dual systems can improve the positioning performance of the integrated system to a certain extent, and the proposed SVD-RACKF can accurately detect the gross errors of the observations and effectively suppress them. Compared with the cubature Kalman filter, the proposed filtering algorithm is more robust, with higher accuracy and reliability of parameter estimation.

scholarly journals Identification of Multi-Faults in GNSS Signals using RSIVIA under Dual Constellation

2021 ◽  
Author(s):  
Shuchen Liu ◽  
Jan-Jöran Gehrt ◽  
Dirk Abel ◽  
René Zweigel
Keyword(s):  
Fault Detection ◽  
Satellite System ◽  
Measurement Unit ◽  
Navigation Systems ◽  
Integrity Monitoring ◽  
Hybrid Strategy ◽  
Multiple Faults ◽  
Fault Detection And Identification ◽  
Tightly Coupled ◽  
Gnss Measurements

This publication presents the development of integrity monitoring and fault detection and exclusion (FDE) of pseudorange measurements, which are used to aid a tightly-coupled navigation filter. This filter is based on an inertial measurement unit (IMU) and is aided by signals of global navigation satellite system (GNSS). Particularly, the GNSS signals include global positioning system (GPS) and Galileo. By using GNSS signals, navigation systems suffer from signal interferences resulting in large pseudorange errors. Further, a higher number of satellites with dual-constellation increases the possibility that satellite observations contain multiple faults. In order to ensure integrity and accuracy of the filter solution, it is crucial to provide sufficient fault-free GNSS measurements for the navigation filter. For this purpose, a new hybrid strategy is applied, combining conventional receiver autonomous integrity monitoring (RAIM) and innovative robust set inversion via interval analysis (RSIVIA). To further improve the performance, as well as the computational efficiency of the algorithm, the estimated velocity and its variance from the navigation filter is used to reduce the size of the RSIVIA initial box.  The designed approach is evaluated with recorded data from an extensive real-world measurement campaign, which has been carried out in GATE Berchtesgaden, Germany. In GATE, up to six Galileo satellites in orbit can be simulated. Further, the signals of simulated Galileo satellites can be manipulated to provide faulty GNSS measurements, such that the fault detection and identification (FDI) capability can be validated. The results show that the designed approach is able to identify the generated faulty GNSS observables correctly and improve the accuracy of the navigation solution. Compared with traditional RSIVIA, the designed new approach provides a more timely fault identification and is more computational efficient.

scholarly journals ACK-MSCKF: Tightly-Coupled Ackermann Multi-State Constraint Kalman Filter for Autonomous Vehicle Localization

Sensors ◽  
2019 ◽  
Vol 19 (21) ◽  
pp. 4816 ◽  
Author(s):  
Fangwu Ma ◽  
Jinzhu Shi ◽  
Yu Yang ◽  
Jinhang Li ◽  
Kai Dai
Keyword(s):  
Kalman Filter ◽  
Pose Estimation ◽  
Process Model ◽  
State Constraint ◽  
Estimation Accuracy ◽  
Measurement Unit ◽  
Tightly Coupled ◽  
Real World Datasets ◽  
Error State ◽  
Visual Measurements

Visual-Inertial Odometry (VIO) is subjected to additional unobservable directions under the special motions of ground vehicles, resulting in larger pose estimation errors. To address this problem, a tightly-coupled Ackermann visual-inertial odometry (ACK-MSCKF) is proposed to fuse Ackermann error state measurements and the Stereo Multi-State Constraint Kalman Filter (S-MSCKF) with a tightly-coupled filter-based mechanism. In contrast with S-MSCKF, in which the inertial measurement unit (IMU) propagates the vehicle motion and then the propagation is corrected by stereo visual measurements, we successively update the propagation with Ackermann error state measurements and visual measurements after the process model and state augmentation. This way, additional constraints from the Ackermann measurements are exploited to improve the pose estimation accuracy. Both qualitative and quantitative experimental results evaluated under real-world datasets from an Ackermann steering vehicle lead to the following demonstration: ACK-MSCKF can significantly improve the pose estimation accuracy of S-MSCKF under the special motions of autonomous vehicles, and keep accurate and robust pose estimation available under different vehicle driving cycles and environmental conditions. This paper accompanies the source code for the robotics community.

scholarly journals Compressed pseudo-SLAM: pseudorange-integrated compressed simultaneous localisation and mapping for unmanned aerial vehicle navigation

2021 ◽  
pp. 1-13
Author(s):  
Jonghyuk Kim ◽  
Jose Guivant ◽  
Martin L. Sollie ◽  
Torleiv H. Bryne ◽  
Tor Arne Johansen
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Computational Cost ◽  
Satellite System ◽  
Measurement Unit ◽  
Electronic Systems ◽  
Computationally Efficient ◽  
Global Correlation ◽  
Aerial Vehicle ◽  
Correlation Information ◽  
Global Navigation Satellite

Abstract This paper addresses the fusion of the pseudorange/pseudorange rate observations from the global navigation satellite system and the inertial–visual simultaneous localisation and mapping (SLAM) to achieve reliable navigation of unmanned aerial vehicles. This work extends the previous work on a simulation-based study [Kim et al. (2017). Compressed fusion of GNSS and inertial navigation with simultaneous localisation and mapping. IEEE Aerospace and Electronic Systems Magazine, 32(8), 22–36] to a real-flight dataset collected from a fixed-wing unmanned aerial vehicle platform. The dataset consists of measurements from visual landmarks, an inertial measurement unit, and pseudorange and pseudorange rates. We propose a novel all-source navigation filter, termed a compressed pseudo-SLAM, which can seamlessly integrate all available information in a computationally efficient way. In this framework, a local map is dynamically defined around the vehicle, updating the vehicle and local landmark states within the region. A global map includes the rest of the landmarks and is updated at a much lower rate by accumulating (or compressing) the local-to-global correlation information within the filter. It will show that the horizontal navigation error is effectively constrained with one satellite vehicle and one landmark observation. The computational cost will be analysed, demonstrating the efficiency of the method.

scholarly journals Many Ways Lead to the Goal—Possibilities of Autonomous and Infrastructure-Based Indoor Positioning

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 397
Author(s):  
Hossein Shoushtari ◽  
Thomas Willemsen ◽  
Harald Sternberg
Keyword(s):  
Mobile Networks ◽  
Dead Reckoning ◽  
Simulated Data ◽  
Minimum Cost ◽  
Cost Effective ◽  
Satellite System ◽  
Position Estimation ◽  
Robust Solution ◽  
Position Data ◽  
Global Navigation Satellite

There are many ways to navigate in Global Navigation Satellite System-(GNSS) shaded areas. Reliable indoor pedestrian navigation has been a central aim of technology researchers in recent years; however, there still exist open challenges requiring re-examination and evaluation. In this paper, a novel dataset is used to evaluate common approaches for autonomous and infrastructure-based positioning methods. The autonomous variant is the most cost-effective realization; however, realizations using the real test data demonstrate that the use of only autonomous solutions cannot always provide a robust solution. Therefore, correction through the use of infrastructure-based position estimation based on smartphone technology is discussed. This approach invokes the minimum cost when using existing infrastructure, whereby Pedestrian Dead Reckoning (PDR) forms the basis of the autonomous position estimation. Realizations with Particle Filters (PF) and a topological approach are presented and discussed. Floor plans and routing graphs are used, in this case, to support PDR positioning. The results show that the positioning model loses stability after a given period of time. Fifth Generation (5G) mobile networks can enable this feature, as well as a massive number of use-cases, which would benefit from user position data. Therefore, a fusion concept of PDR and 5G is presented, the benefit of which is demonstrated using the simulated data. Subsequently, the first implementation of PDR with 5G positioning using PF is carried out.

scholarly journals An Optimized Tightly-Coupled VIO Design on the Basis of the Fused Point and Line Features for Patrol Robot Navigation

Sensors ◽  
2019 ◽  
Vol 19 (9) ◽  
pp. 2004 ◽  
Author(s):  
Linlin Xia ◽  
Qingyu Meng ◽  
Deru Chi ◽  
Bo Meng ◽  
Hanrui Yang
Keyword(s):  
Global Positioning System ◽  
Inertial Measurement Unit ◽  
Feature Matching ◽  
Robot Navigation ◽  
Measurement Unit ◽  
State Estimator ◽  
Localization And Mapping ◽  
Global Positioning ◽  
Tightly Coupled ◽  
Association State

The development and maturation of simultaneous localization and mapping (SLAM) in robotics opens the door to the application of a visual inertial odometry (VIO) to the robot navigation system. For a patrol robot with no available Global Positioning System (GPS) support, the embedded VIO components, which are generally composed of an Inertial Measurement Unit (IMU) and a camera, fuse the inertial recursion with SLAM calculation tasks, and enable the robot to estimate its location within a map. The highlights of the optimized VIO design lie in the simplified VIO initialization strategy as well as the fused point and line feature-matching based method for efficient pose estimates in the front-end. With a tightly-coupled VIO anatomy, the system state is explicitly expressed in a vector and further estimated by the state estimator. The consequent problems associated with the data association, state optimization, sliding window and timestamp alignment in the back-end are discussed in detail. The dataset tests and real substation scene tests are conducted, and the experimental results indicate that the proposed VIO can realize the accurate pose estimation with a favorable initializing efficiency and eminent map representations as expected in concerned environments. The proposed VIO design can therefore be recognized as a preferred tool reference for a class of visual and inertial SLAM application domains preceded by no external location reference support hypothesis.

scholarly journals Improvement of Anomalous Behavior Detection of GNSS Signal Based on TDNN for Augmentation Systems

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3800 ◽  
Author(s):  
Daehee Kim ◽  
Jeongho Cho
Keyword(s):  
Intelligent Transportation Systems ◽  
Satellite System ◽  
Anomalous Behavior ◽  
Transportation Systems ◽  
Civil Aviation ◽  
Integrity Monitoring ◽  
Delayed Neural Networks ◽  
Stringent Performance ◽  
Integrity Assurance ◽  
Global Navigation Satellite

The reliability of a navigation system is crucial for navigation purposes, especially in areas where stringent performance is required, such as civil aviation or intelligent transportation systems (ITSs). Therefore, integrity monitoring is an inseparable part of safety-critical navigation applications. The receiver autonomous integrity monitor (RAIM) has been used with the global navigation satellite system (GNSS) to provide integrity monitoring within avionics itself, such as in civil aviation for lateral navigation (LNAV) or the non-precision approach (NPA). However, standard RAIM may not meet the stricter aviation availability and integrity requirements for certain operations, e.g., precision approach flight phases, and also is not sufficient for on-ground vehicle integrity monitoring of several specific ITS applications. One possible way to more clearly distinguish anomalies in observed GNSS signals is to take advantage of time-delayed neural networks (TDNNs) to estimate useful information about the faulty characteristics, rather than simply using RAIM alone. Based on the performance evaluation, it was determined that this method can reliably detect flaws in navigation satellites significantly faster than RAIM alone, and it was confirmed that TDNN-based integrity monitoring using RAIM is an encouraging alternative to improve the integrity assurance level of RAIM in terms of GNSS anomaly detection.

scholarly journals Wind Gust Measuring at Low Altitude Using An Unmanned Aerial System

2021 ◽  
Author(s):  
Alton Yeung
Keyword(s):  
Turbulence Models ◽  
Satellite System ◽  
Data System ◽  
Measurement Unit ◽  
Wind Gust ◽  
Wind Gusts ◽  
Low Altitude ◽  
And Performance ◽  
Global Navigation Satellite ◽  
Aerial Platform

A small unmanned aerial vehicle (UAV) was developed with the specific objective to explore atmospheric wind gusts at low altitudes within the atmospheric boundary layer (ABL). These gusts have major impacts on the flight characteristics and performance of modern small unmanned aerial vehicles. Hence, this project was set to investigate the power spectral density of gusts observed at low altitudes by measuring the gusts with an aerial platform. The small UAV carried an air-data system including a fivehole probe that was adapted for this specific application. The air-data system measured the local wind gusts with an accuracy of 0.5 m/s by combining inputs from a five-hole probe, an inertial measurement unit, and Global Navigation Satellite System (GNSS) receivers. Over 20 flights were performed during the development of the aerial platform. Airborne experiments were performed to collect gust data at low altitudes between 50 m and 100 m. The result was processed into turbulence spectrum and the measurements were compared with the MIL-HDBK-1797 von K´arm´an turbulence model and the results have shown the model underpredicted the gust intensities experienced by the flight vehicle. The anisotropic properties of low-altitude turbulence were also observed when analyzing the measured gusts spectra. The wind and gust data collected are useful for verifying the existing turbulence models for low-altitude flights and benefit the future development of small UAVs in windy environment.

scholarly journals OUTDOOR AR-APPLICATION FOR THE DIGITAL MAP TABLE

2020 ◽  
Vol XLIV-3/W1-2020 ◽  
pp. 93-98
Author(s):  
S. Maier ◽  
T. Gostner ◽  
F. van de Camp ◽  
A. H. Hoppe
Keyword(s):  
Augmented Reality ◽  
Geographical Location ◽  
Satellite System ◽  
Reference Points ◽  
Sensor Data ◽  
Measurement Unit ◽  
Positional Accuracy ◽  
Digital Map ◽  
The World ◽  
Global Navigation Satellite

Abstract. In many fields today, it is necessary that a team has to do operational planning for a precise geographical location. Examples for this are staff work, the preparation of surveillance tasks at major events or state visits and sensor deployment planning for military and civil reconnaissance. For these purposes, Fraunhofer IOSB is developing the Digital Map Table (DigLT). When making important decisions, it is often helpful or even necessary to assess a situation on site. An augmented reality (AR) solution could be useful for this assessment. For the visualization of markers at specific geographical coordinates in augmented reality, a smartphone has to be aware of its position relative to the world. It is using the sensor data of the camera and inertial measurement unit (IMU) for AR while determining its absolute location and direction with the Global Navigation Satellite System (GNSS) and its magnetic compass. To validate the positional accuracy of AR markers, we investigated the current state of the art and existing solutions. A prototype application has been developed and connected to the DigLT. With this application, it is possible to place markers at geographical coordinates that will show up at the correct location in augmented reality at anyplace in the world. Additionally, a function was implemented that lets the user select a point from the environment in augmented reality, whose geographical coordinates are sent to the DigLT. The accuracy and practicality of the placement of markers were examined using geodetic reference points. As a result, we can conclude that it is possible to mark larger objects like a car or a house, but the accuracy mainly depends on the internal compass, which causes a rotational error that increases with the distance to the target.

scholarly journals Opportunistic In-Flight INS Alignment Using LEO Satellites and a Rotatory IMU Platform

Aerospace ◽  
2021 ◽  
Vol 8 (10) ◽  
pp. 280
Author(s):  
Farzan Farhangian ◽  
Hamza Benzerrouk ◽  
Rene Landry
Keyword(s):  
Kalman Filter ◽  
State Space Model ◽  
Flight Test ◽  
Satellite System ◽  
Low Earth Orbit ◽  
Measurement Unit ◽  
Starting Point ◽  
Leo Satellites ◽  
Positioning Method ◽  
Global Navigation Satellite

With the emergence of numerous low Earth orbit (LEO) satellite constellations such as Iridium-Next, Globalstar, Orbcomm, Starlink, and OneWeb, the idea of considering their downlink signals as a source of pseudorange and pseudorange rate measurements has become incredibly attractive to the community. LEO satellites could be a reliable alternative for environments or situations in which the global navigation satellite system (GNSS) is blocked or inaccessible. In this article, we present a novel in-flight alignment method for a strapdown inertial navigation system (SINS) using Doppler shift measurements obtained from single or multi-constellation LEO satellites and a rotation technique applied on the inertial measurement unit (IMU). Firstly, a regular Doppler positioning algorithm based on the extended Kalman filter (EKF) calculates states of the receiver. This system is considered as a slave block. In parallel, a master INS estimates the position, velocity, and attitude of the system. Secondly, the linearized state space model of the INS errors is formulated. The alignment model accounts for obtaining the errors of the INS by a Kalman filter. The measurements of this system are the difference in the outputs from the master and slave systems. Thirdly, as the observability rank of the system is not sufficient for estimating all the parameters, a discrete dual-axis IMU rotation sequence was simulated. By increasing the observability rank of the system, all the states were estimated. Two experiments were performed with different overhead satellites and numbers of constellations: one for a ground vehicle and another for a small flight vehicle. Finally, the results showed a significant improvement compared to stand-alone INS and the regular Doppler positioning method. The error of the ground test reached around 26 m. This error for the flight test was demonstrated in different time intervals from the starting point of the trajectory. The proposed method showed a 180% accuracy improvement compared to the Doppler positioning method for up to 4.5 min after blocking the GNSS.

Sign in / Sign up

Export Citation Format

Share Document