scholarly journals Flexible UHF RFID Tag for Blood Tubes Monitoring

Sensors ◽  
2019 ◽  
Vol 19 (22) ◽  
pp. 4903 ◽  
Author(s):  
Mohamed El Khamlichi ◽  
Alejandro Alvarez Melcon ◽  
Otman El Mrabet ◽  
Mohammed Ali Ennasar ◽  
Juan Hinojosa
Keyword(s):  
Blood Sample ◽  
Radio Frequency Identification ◽  
Low Cost ◽  
Automatic Identification ◽  
Uhf Rfid ◽  
Sample Collection ◽  
Dielectric Parameters ◽  
Rfid Tag ◽  
High Dielectric ◽  
Passive Rfid

Low-cost and flexible radio frequency identification (RFID) tag for automatic identification, tracking, and monitoring of blood products is in great demand by the healthcare industry. A robust performance to meet security and traceability requirements in the different blood sample collection and analysis centers is also required. In this paper, a novel low-cost and flexible passive RFID tag is presented for blood sample collection tubes. The tag antenna is based on two compact symmetrical capacitive structures and works at the ultra-high frequency (UHF) European band (865 MHz–868 MHz). The tag antenna is designed considering the whole dielectric parameters such as the blood, substrate and tube. In this way, it operates efficiently in the presence of blood, which has high dielectric permittivity and loss. Measurement results of the proposed tag have confirmed simulation results. The measured performance of the tag shows good matching in the desired frequency band, leading to reading ranges up to 2.2 m, which is 4.4 times higher than typical commercial tags. The potential of this tag as a sensor to monitor the amount of blood contained in clinic tubes is also demonstrated. It is expected that the proposed tag can be useful and effective in future RFID systems to introduce security and traceability in different blood sample collection and analysis centers.

scholarly journals A Compact and Flexible UHF RFID Tag Antenna for Massive IoT Devices in 5G System

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5713
Author(s):  
Muhammad Hussain ◽  
Yasar Amin ◽  
Kyung-Geun Lee
Keyword(s):  
Radio Frequency Identification ◽  
Cost Effective ◽  
Future Internet ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Low Profile ◽  
5G Systems ◽  
Iot Devices ◽  
Passive Rfid ◽  
Read Range

Upcoming 5th-generation (5G) systems incorporate physical objects (referred to as things), which sense the presence of components such as gears, gadgets, and sensors. They may transmit many kinds of states in the smart city context, such as new deals at malls, safe distances on roads, patient heart rhythms (especially in hospitals), and logistic control at aerodromes and seaports around the world. These serve to form the so-called future internet of things (IoT). From this futuristic perspective, everything should have its own identity. In this context, radio frequency identification (RFID) plays a specific role, which provides wireless communications in a secure manner. Passive RFID tags carry out work using the energy harvested among massive systems. RFID has been habitually realized as a prerequisite for IoT, the combination of which is called IoT RFID (I-RFID). For the current scenario, such tags should be productive, low-profile, compact, easily mountable, and have eco-friendly features. The presently available tags are not cost-effective and have not been proven as green tags for environmentally friendly IoT in 5G systems nor are they suitable for long-range communications in 5G systems. The proposed I-RFID tag uses the meandering angle technique (MAT) to construct a design that satisfies the features of a lower-cost printed antenna over the worldwide UHF RFID band standard (860–960 MHz). In our research, tag MAT antennas are fabricated on paper-based Korsnäs by screen- and flexo-printing, which have lowest simulated effective outcomes with dielectric variation due to humidity and have a plausible read range (RR) for European (EU; 866–868 MHz) and North American (NA; 902–928 MHz) UHF band standards. The I-RFID tag size is reduced by 36% to 38% w.r.t. a previously published case, the tag gain has been improved by 23.6% to 33.12%, and its read range has been enhanced by 50.9% and 59.6% for EU and NA UHF bands, respectively. It provides impressive performance on some platforms (e.g., plastic, paper, and glass), thereby providing a new state-of-the-art I-RFID tag with better qualities in 5G systems.

Monitoring rock displacement threshold with 1-bit sensing passive RFID tag

2021 ◽  
Author(s):  
Mathieu Le Breton ◽  
Nicolas Grunbaum ◽  
Laurent Baillet ◽  
Éric Larose
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Earth Science ◽  
Low Cost ◽  
New Technology ◽  
Uhf Rfid ◽  
Displacement Threshold ◽  
Frequency Identification ◽  
Passive Rfid

<p>Billions of passive Radiofrequency tags are produced by the Radio-Frequency Identification (RFID) industry every year to identify goods remotely. Enhanced RFID adds the capacity for localisation and sensing that can be used in earth science for long-term and spatially dense monitoring with low-cost tags. Localisation has been used already to monitor displacements of coarse sediment and landslides over several metres. Sensing capabilities have been developed in laboratories, but never implemented on real fields. This work presents the first RFID sensing application in earth science, using the simplest 1-bit sensor to detect millimetric motion of unstable rocks. The application required designing custom RFID tags adapted for outdoor usage at long range, adapting the data acquisition of an existing tag microcircuit, and designing a sensor that triggers when displacement exceeds a few millimetres, which threshold displacement can be adapted for each sensor. In complement, the system embeds displacement sensing to measure larger displacements> 5 mm, using the phase-based measurement already deployed on landslides. The presentation display results from laboratory tests and from an implementation in a real site in Eastern France. The advantages and drawbacks of the method are discussed, as well as the future potential RFID sensors that could monitor unstable terrains.</p><p>Author’s published work on the topic:</p><p>Le Breton, M., Baillet, L., Larose, E., Rey, E., Benech, P., Jongmans, D., Guyoton, F., 2017. Outdoor UHF RFID: Phase Stabilization for Real-World Applications. IEEE Journal of Radio Frequency Identification 1, 279–290.</p><p>Le Breton, M., Baillet, L., Larose, E., Rey, E., Benech, P., Jongmans, D., Guyoton, F., Jaboyedoff, M., 2019. Passive radio-frequency identification ranging, a dense and weather-robust technique for landslide displacement monitoring. Engineering Geology 250, 1–10.</p><p>Le Breton, M., 2019. Suivi temporel d’un glissement de terrain à l’aide d’étiquettes RFID passives, couplé à l’observation de pluviométrie et de bruit sismique ambiant (PhD Thesis). Université Grenoble Alpes, ISTerre, Grenoble, France.</p><p>Le Breton, M., Baillet, L., Larose, É., Rey, E., Jongmans, D., Guyoton, F., Benech, P., 2020. Passive RFID, a new technology for dense and long-term monitoring of unstable structures: review and prospective. (No. EGU2020-19726). Presented at the EGU2020, Copernicus Meetings. https://doi.org/10.5194/egusphere-egu2020-19726</p><p>Le Breton M., 2020, Suivi de terrains instables à l'aide d'un réseau dense de capteurs RFID: Émergence de nouvelles applications, presented at Journées Nationales de Géotechnique et de Géologie de l'ingénieur (JNGG), Jean Goguel Award public session, 2021.</p>

Two Layered Embedded Encryption for Multiple Frequency RFID Tags

2011 ◽  
Vol 367 ◽  
pp. 83-87
Author(s):  
K. Karthikeyan ◽  
Gaurav Bajpai
Keyword(s):  
Data Storage ◽  
Radio Frequency Identification ◽  
Low Cost ◽  
Automatic Identification ◽  
Identification System ◽  
Rfid Tags ◽  
Rfid Tag ◽  
Storage And Retrieval ◽  
Bar Codes ◽  
Frequency Identification

Radio Frequency Identification (RFID) is an automatic identification system. The data storage and retrieval on special devices are carried by RFID tags or transponders. RFID tag applications include enterprise supply chain management to improve the efficiency of inventory tracking and management. These replace bar codes and other low cost remote sensors earlier in use.

RFID Indoor Localization Techniques

2018 ◽  
pp. 142-192 ◽  
Author(s):  
Yongtao Ma ◽  
Zheng Gao ◽  
Yang Zhao
Keyword(s):  
Radio Frequency Identification ◽  
Indoor Localization ◽  
Low Cost ◽  
Research Area ◽  
Uhf Rfid ◽  
Passive Uhf Rfid ◽  
Frequency Identification ◽  
Active Research ◽  
Passive Rfid ◽  
Key Techniques

Radio frequency identification (RFID) is a technique using two-way radio transmission pattern to transmit information through the device of interrogator (also called reader) and tag. It is considered to be one of the most popular techniques for internet of things (IOT). In this chapter, the authors study indoor localization techniques based on passive UHF RFID, which works around the frequency of 900MHz. Passive RFID has the advantage of reasonable reading distance, non-contact, easy deployment, and low cost. The tags do not need battery and it can harvest power through wireless charging. Due to those advantages, passive UHF RFID positioning has always been an active research area in the past few decades. This chapter discusses the key techniques in passive UHF RFID positioning, which include range-based, range-free, tag-based (device-based), tag-free (device-free), and improved positioning methods. All the techniques studied are suited to be implemented in RFID systems, each of which can be accommodated to a specific application scenario.

scholarly journals Flexible Radio-Frequency Identification (RFID) Tag Antenna for Sensor Applications

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4212 ◽  
Author(s):  
Mohammad Islam ◽  
Touhidul Alam ◽  
Iskandar Yahya ◽  
Mengu Cho
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Low Cost ◽  
System Level ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Sensor Applications ◽  
Frequency Identification ◽  
Flexible Radio ◽  
Read Range

In this paper, an inkjet-printed flexible Radio-Frequency Identification (RFID) tag antenna is proposed for an ultra-high frequency (UHF) sensor application. The proposed tag antenna facilitates a system-level solution for low-cost and faster mass production of RFID passive tag antenna. The tag antenna consists of a modified meander line radiator with a semi-circular shaped feed network. The structure is printed on photo paper using silver nanoparticle conductive ink. The generic design outline, as well as tag antenna performances for several practical application aspects are investigated. The simulated and measured results verify the coverage of universal UHF RFID band with an omnidirectional radiation pattern and a long-read range of 15 ft. In addition, the read range for different bending angles and lifetimes of the tag antenna are also demonstrated.

scholarly journals Small Size and Low Cost UHF RFID Tag Antenna Mountable on Metallic Objects

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Sergio López-Soriano ◽  
Josep Parrón
Keyword(s):  
Radio Frequency ◽  
Transmission Line ◽  
Radio Frequency Identification ◽  
Low Cost ◽  
Experimental Results ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Frequency Identification ◽  
European Regulations ◽  
Metallic Object

Reducing tag size while maintaining good performance is one of the major challenges in radio-frequency identification applications (RFID), in particular when labeling metallic objects. In this contribution, a small size and low cost tag antenna for identifying metal objects in the European UHF band (865–868 MHz) is presented. The antenna consists of a transmission line mounted on an inexpensive thin dielectric which is proximity-coupled to a short-ended patch mounted on FR4 substrate. The overall dimensions of the tag are 33.5 × 30 × 3.1 mm. Experimental results show that, for an EIRP of 3.2 W (European regulations), such a small and cheap tag attains read ranges of about 5 m when attached to a metallic object.

scholarly journals Design of a Wireless, Passive, Single-Use Emergency Call System

2010 ◽  
Author(s):  
Wayne L. Staats ◽  
Dan P. Lorenc ◽  
Zihao Zhang ◽  
Ethan L. Huwe ◽  
Mark M. Barineau ◽  
...  
Keyword(s):  
Radio Frequency Identification ◽  
Disease Transmission ◽  
Low Cost ◽  
Hospital Staff ◽  
Rfid Tag ◽  
Frequency Identification ◽  
Single Use ◽  
Passive Rfid ◽  
Mechanical Switch ◽  
Improve Patient

In order to improve patient access to nurses during emergencies, a wireless wrist-mounted call button system was developed. The goal of this project was to create a simple, easy-to-use system that features a completely passive, wireless call button. Three major problems in existing systems — inability for patients to locate or reach the button, unnecessary user interface complexity, and the introduction of a potential vector for hospital-contracted illness — were addressed in the design. The wireless nature of the device ensures that it is always near the patient. A single-button interface considerably simplifies its use in comparison to multi-button systems, eliminating the possibility of incorrect button presses. Finally, the proposed call button uses inexpensive technologies and can be manufactured for such a low cost that it can be offered as a single-use device, eliminating the possibility of patient-to-patient disease transmission. Using radio-frequency identification (RFID) technology, patients are able to call for hospital staff from any location in the hospital that is covered by readers. The call button uses a passive RFID tag that can be turned on or off by a mechanical switch. A second tag is used to notify the system when a patient is out of range. The design was prototyped and tested, and future improvements are suggested.

scholarly journals On the application of the EM-imaging for chipless RFID tags

2015 ◽  
Vol 2 (2) ◽  
pp. 86-96 ◽  
Author(s):  
M. Zomorrodi ◽  
N.C. Karmakar
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
60 Ghz ◽  
Rfid Tag ◽  
High Data ◽  
Data Encoding ◽  
Bending Effect ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Cost Item

The electromagnetic (EM) imaging technique at mm-band 60 GHz is proposed for data encoding purpose in the chipless Radio Frequency Identification (RFID) systems. The fully printable chipless RFID tag comprises tiny conductive EM polarizers to create high cross-polar radar cross-section. Synthetic aperture radar approach is applied for formation of the tag's EM-image and revealing the tag's content. The achieved high data encoding capacity of 2 bits/cm2in this technique based on a fully printable tag is very convincing for many applications. The system immunity to multipath interference, bending effect, and printing inaccuracy suggests huge potentials for low-cost item tagging. Tags are also readable through a tick paper envelop; hence secure identification is provided by the proposed technique.

scholarly journals Advancing the Ultra High Frequency RFID in Industrial Applications: A Review

2021 ◽  
Vol 44 (1) ◽  
pp. 40-52
Author(s):  
Tracy Aleong ◽  
Kit Fai Pun
Keyword(s):  
Radio Frequency Identification ◽  
High Frequency ◽  
Measurement Data ◽  
Industrial Applications ◽  
Automatic Identification ◽  
Rfid Technology ◽  
Uhf Rfid ◽  
Privacy And Security ◽  
Ultra High Frequency ◽  
The Past

Radio Frequency Identification (RFID) technology transmits data wirelessly and falls under the broad classification of Automatic Identification and Data Capture (AIDC). The advances in RFID technology continue to be accepted worldwide for various tracking and monitoring type applications. This paper reviews the principle of RFID system operation using an extensive search of relevant articles from technology management and related journals, over the past two decades. It explores 1) the RFID tags operating in the ultra-high frequency (UHF) band, 2) analyses some of the major advancements of this technology in the field of sensor tagging solutions in the past two decades, and 3) discusses industry-based applications utilising UHF RFID sensor tagging solutions for process measurement data acquisition. The main challenges identified are privacy and security concerns on their applications in industry. The paper contributes to amalgamating a list of UHF RFID industry-based applications. It is expected that the findings from this review exercise would shed light on critical areas of the UHF RFID Technology.

scholarly journals Design of Nested H slot Passive UHF RFID Tag

2020 ◽  
Vol 10 (1) ◽  
pp. 346-349
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Rfid Tags ◽  
Uhf Rfid ◽  
Antenna Structure ◽  
Rfid Tag ◽  
Passive Uhf Rfid ◽  
Related Information ◽  
Distance Communication ◽  
Passive Rfid

RFID is a short distance communication system which comprises of a RFID tag, a RFID reader and a personal computer with desired software that can maintain the related information. These RFID tags can be of active or passive types. This paper focuses on design, simulation and fabrication of passive ultra-high frequency RFID tag (microchip and an antenna) which resonates at the frequency 866 MHz in the Industrial Scientific Medical Band. The nested H-slot inverted-F microstrip antenna structure is used for the design of passive RFID tag. It examines the specific tag geometry and its characteristics to optimize the PIFA antenna and in turn RFID tag’s performance.

Sign in / Sign up

Export Citation Format

Share Document