scholarly journals OFBG-Based Smart Double-Skin Tubular Confined-Concrete Column with Basalt FRP-Steel Composite

Sensors ◽  
2019 ◽  
Vol 19 (16) ◽  
pp. 3572
Author(s):  
Yung William Sasy Chan ◽  
Zhi Zhou ◽  
Wanqiu Liu ◽  
Jinping Ou
Keyword(s):  
Axial Stress ◽  
Axial Strain ◽  
The Self ◽  
Confined Concrete ◽  
Concrete Column ◽  
Health State ◽  
Damage Scenarios ◽  
Double Skin ◽  
Steel Composite ◽  
Sensing Performance

Fiber-reinforced polymer (FRP) composites have been widely employed to design advanced structural columns such as the hybrid FRP–concrete–steel double-skin tubular column (hybrid DSTC) with potential benefits. To date, the safety and self-monitoring of the hybrid DSTCs are still a challenge to overcome due to the complex damage scenarios. This paper investigates the self-sensing performance of a newly developed smart double-skin tubular confined concrete column (smart BFST-DSTC) made of basalt FRP–steel composite with built-in optical fiber Bragg grating sensors (OFBGs). The design of the smart BFST-DSTC and sensing principle are firstly addressed, followed by an experimental investigation on the basic mechanical properties and strain-based sensing performance of ten scaled specimens under axial compression. The outcomes reveal the enhancement of the proposed column in terms of load-carrying capacity, confinement ratio, and axial stress-axial strain behavior, as well as failure and damage modes when compared with the hybrid DSTC. The self-sensing investigation demonstrates that the measurement range satisfies the requirement to monitor and evaluate the hoop strains of the FRP jackets and the health state of the inner tube. The smart BFST-DSTC can replace the hybrid DSTC with the ability to provide early failure warning and life cycle health monitoring.

scholarly journals Effect of Cross-Sectional Aspect Ratio on Rectangular FRP-Concrete-Steel Double-Skin Tubular Columns under Axial Compression

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Bing Zhang ◽  
Xia-Min Hu ◽  
Wei Wei ◽  
Qian-Biao Zhang ◽  
Ning-Yuan Zhang ◽  
...  
Keyword(s):  
Aspect Ratio ◽  
Cross Section ◽  
Axial Stress ◽  
Axial Strain ◽  
Steel Tube ◽  
Confined Concrete ◽  
Cross Sectional ◽  
Tubular Columns ◽  
Double Skin ◽  
Frp Tube

Hybrid FRP-concrete-steel double-skin tubular columns (hybrid DSTCs) are novel hollow columns consisting of an outer FRP tube, an inner steel tube, and the concrete between the two tubes. Hybrid DSTCs possess important advantages, such as excellent corrosion resistance as well as remarkable seismic resistance. However, existing studies are mainly focused on hybrid DSTCs with a circular cross section or a square cross section. When a column is subjected to different load levels in the two horizontal directions, a rectangular column is preferred as it can provide different bending stiffness and moment capacity around its two axes of symmetry. This paper presents an experimental study on rectangular DSTCs with a particular focus on the effect of the cross-sectional aspect ratio (i.e., the ratio of the breadth to the width of the rectangular cross section). The effect of the cross-sectional shape of the inner steel tube (i.e., both elliptical and rectangular inner steel tubes were used) and the effect of FRP tube thickness were also investigated experimentally. Experimental results show that a larger aspect ratio will have no negative effect on the confinement effect in rectangular DSTCs; a rectangular DSTC with a larger aspect ratio generally has a larger ultimate axial strain and a higher axial stress at the ultimate axial strain; rectangular DSTCs with an elliptical steel tube generally have better performance than corresponding specimens with a rectangular steel tube. An existing model, which was developed based on a model for rectangular FRP-confined concrete columns and a model for circular DSTCs, is verified using the test results of the present study. The model generally provides close predictions for the peak axial stress of the confined concrete but yields conservative predictions for the ultimate axial strain for rectangular DSTCs.

Comparison of Stress-Strain Relationships of FRP and Actively Confined High-Strength Concrete: Experimental Observations

2014 ◽  
Vol 919-921 ◽  
pp. 29-34 ◽  
Author(s):  
Jian Chin Lim ◽  
Togay Ozbakkloglu
Keyword(s):  
High Strength Concrete ◽  
Axial Stress ◽  
Axial Strain ◽  
High Strength ◽  
Confining Pressure ◽  
Confined Concrete ◽  
Lateral Strain ◽  
Stress Strain ◽  
Strength Concrete ◽  
Actively Confined Concrete

It is well established that lateral confinement of concrete enhances its axial strength and deformability. It is often assumed that, at a same level of confining pressure, the axial compressive stress and strain of fiber reinforced polymer (FRP)-confined concrete at a given lateral strain are the same as those in concrete actively confined concrete. To assess the validity of this assumption, an experimental program relating both types of confinement systems was conducted. 25 FRP-confined and actively confined high-strength concrete (HSC) specimens cast from a same batch of concrete were tested under axial compression. The axial stress-strain and lateral strain-axial strain curves obtained from the two different confinement systems were assessed. The results indicate that, at a given axial strain, lateral strains of actively confined and FRP-confined concretes correspond, when they are subjected to the same lateral confining pressure. However, it is observed that, at these points of intersections on axial strain-lateral strain curves, FRP-confined concrete exhibits a lower axial stress than the actively confined concrete, indicating that the aforementioned assumption is not accurate. The test results indicate that the difference in the axial stresses of FRP-confined and actively confined HSC becomes more significant with an increase in the level of confining pressure.

Influence of FRP-to-Concrete Gap Effect on Axial Strains of FRP-Confined Concrete Columns

2015 ◽  
Vol 1119 ◽  
pp. 760-765
Author(s):  
Thomas Vincent ◽  
Togay Ozbakkloglu
Keyword(s):  
Cross Sections ◽  
Axial Stress ◽  
Axial Strain ◽  
Strain Curve ◽  
Shrinkage Strain ◽  
Confined Concrete ◽  
Gap Effect ◽  
Stress Strain ◽  
Concrete Shrinkage ◽  
Concrete Interface

This paper reports on an experimental investigation on the influence of FRP-to-concrete interface gap, caused by concrete shrinkage, on axial compressive behavior of concrete-filled FRP tube (CFFT) columns. A total of 12 aramid FRP (AFRP)-confined concrete specimens with circular cross-sections were manufactured. 3 of these specimens were instrumented to monitor long term shrinkage strain development and the remaining 9 were tested under monotonic axial compression. The influence of concrete shrinkage was examined by applying a gap of up to 0.06 mm thickness at the FRP-to-concrete interface, simulating 800 microstrain of shrinkage in the radial direction. Axial strain recordings were compared on specimens instrumented with two different measurement methods: full-and mid-height linear variable displacement transformers (LVDTs). Results of the experimental study indicate that the influence of interface gap on stress-strain behavior is significant, with an increase in interface gap resulting in a decrease and increase in the compressive strength and ultimate axial strain, respectively. It was also observed that an increase in interface gap leads to a slight loss in axial stress at the transition region of the stress-strain curve. Finally, it is found that an increase in the interface gap results in a significant decrease in the ratio of the ultimate axial strains obtained from mid-section and full-height LVDTs.

Fiber element modeling of circular double-skin concrete-filled stainless-carbon steel tubular columns under axial load and bending

2022 ◽  
pp. 136943322110651
Author(s):  
Mizan Ahmed ◽  
Qing Quan Liang ◽  
Ahmed Hamoda
Keyword(s):  
Stainless Steel ◽  
Carbon Steel ◽  
High Performance ◽  
Mechanical Performance ◽  
Axial Strain ◽  
High Strength ◽  
Offshore Structures ◽  
Numerical Results ◽  
Beam Columns ◽  
Double Skin

Circular concrete-filled double-skin steel tubular (CFDST) columns with external stainless-steel are high-performance composite columns that have potential applications in civil construction including the construction of offshore structures, bridge piers, and transmission towers. Reflecting the limited research performed on investigating their mechanical performance, this study develops a computationally efficient fiber model to simulate the responses of short and slender beam-columns accounting for the influences of material and geometric nonlinearities. Accurate material laws of stainless steel, carbon steel, and confined concrete are implemented in the mathematical modeling scheme developed. A new solution algorithm based on the Regula-Falsi method is developed to maintain the equilibrium condition. The independent test results of short and slender CFDST beam-column are utilized to validate the accuracy of the theoretical solutions. The influences of various column parameters are studied on the load-axial strain [Formula: see text] curves, load-lateral deflection [Formula: see text] curves, column strength curves, and interaction curves of CFDST columns. Design formulas are suggested for designing short and beam-columns and validated against the numerical results. The computational model is found to be capable of simulating the responses of CFDST short and slender columns reasonably well. Parametric studies show that the consideration of the concrete confinement is important for the accuracy of the prediction of their mechanical responses. Furthermore, high-strength concrete can be utilized to enhance their load-carrying capacity particularly for short and intermediate slender beam-columns. The strengths of CFDST columns computed by the suggested design model are in good agreement with the test and numerical results.

Combined-Stress Tests on 24S-T Aluminum-Alloy Tubes

1947 ◽  
Vol 14 (2) ◽  
pp. A147-A153
Author(s):  
W. R. Osgood
Keyword(s):  
Aluminum Alloy ◽  
Hoop Stress ◽  
Axial Stress ◽  
Axial Strain ◽  
Maximum Deviation ◽  
Shearing Stress ◽  
Stress Tests ◽  
Combined Stress ◽  
Stress Strain ◽  
Shearing Strain

Abstract Combined-stress tests were made on five 24S-T aluminum-alloy tubes, 1 3/4 in. ID × 0.05 in. thick. The ratios of circumferential (hoop) stress to axial stress were 0, 1/2, 1, 2, and ∞. The tubes were tested to failure and sufficient measurements of circumferential strain and axial strain were taken to plot stress-strain curves almost up to rupture. The results are presented in the form of two sets of stress-strain curves for each ratio of stresses, namely, maximum shearing stress plotted against maximum shearing strain, and octahedral shearing stress plotted against octahedral shearing strain. In each plot the maximum deviation of the curves is about ± 5 per cent. A method of evaluating small octahedral shearing strains from the data is given which does not assume Poisson’s ratio to be 1/2.

scholarly journals Low-Cost Fiber Rope Reinforced Polymer (FRRP) Confinement of Square Columns with Different Corner Radii

Buildings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 355
Author(s):  
Qudeer Hussain ◽  
Anat Ruangrassamee ◽  
Somnuk Tangtermsirikul ◽  
Panuwat Joyklad ◽  
Anil C. Wijeyewickrema
Keyword(s):  
Ultimate Strength ◽  
Predictive Models ◽  
Axial Stress ◽  
Low Cost ◽  
Concrete Columns ◽  
Confined Concrete ◽  
Test Results ◽  
Stress Strain ◽  
Reinforced Polymer

This research investigates the behavior of square concrete columns externally wrapped by low-cost and easily available fiber rope reinforced polymer (FRRP) composites. This study mainly aims to explore the axial stress-strain relationships of FRRP-confined square columns. Another objective is to assess suitable predictive models for the ultimate strength and strain of FRRP-confined square columns. A total of 60 square concrete columns were cast, strengthened, and tested under compression. The parameters were the corner radii of square columns (0, 13, and 26 mm) and different materials of FRRP composites (polyester, hemp, and cotton FRRP composites). The strength and deformability of FRRP-confined specimens were observed to be higher than the unconfined specimens. It was observed that strength gains of FRRP-confined concrete columns and corner radii were directly proportional. The accuracy of ultimate strength and strain models developed for synthetic FRRP-confined square columns was assessed using the test results of this study, showing the need for the development of improved predictive models for FRRP-confined square columns. Newly developed unified models were found to be accurate in predicting the ultimate strength and strain of FRRP-confined columns.

Prior and post peaks compressive behavior of concrete-filled double-skin tubular columns with BFRP-punched-in outer steel and BFRP-circular inner steel

2020 ◽  
Vol 23 (13) ◽  
pp. 2911-2927
Author(s):  
Yung William Sasy Chan ◽  
Zhi Zhou ◽  
Zhenzhen Wang ◽  
Jinping Ou
Keyword(s):  
Load Capacity ◽  
High Energy ◽  
Fiber Reinforced Polymer ◽  
Confined Concrete ◽  
Peak Performance ◽  
Design Parameters ◽  
Fiber Reinforced ◽  
Tubular Columns ◽  
Reinforced Polymer ◽  
Double Skin

Fiber-reinforced polymer composites have been widely used to design fiber-reinforced polymer–based confined concrete columns with potential benefits. However, it is critical to design a column with sufficient post-peak performance that can prevent its collapse at the rupture of the fiber-reinforced polymer tube. This article presents the experimental results on the prior and post peaks behavior of concrete-filled double-skin tubular columns with basalt fiber-reinforced polymer (BFRP)–punched-in outer steel and BFRP-circular inner steel (BFST-DSTCs). Twenty-two specimens were tested under axial compression to investigate the effects of design parameters on the behavior of the BFST-DSTC. The outcomes reveal that the BFST-DSTC exhibits the best performance in terms of load capacity, confinement ratio, failure and damage mechanisms, and ductility in prior and post peaks. The inner fiber-reinforced polymer jacket delays the buckling of the inner tube. The punched-in patterns of the outer steel improve the confinement effectiveness of the fiber-reinforced polymer jacket. The BFST-DSTC displays a good post-peak performance with high-energy dissipation capacity that prevents the concerned structure from collapse after the fiber-reinforced polymer jacket rupture. Finally, a new confinement model is proposed to predict the ultimate point of the confined concrete.

Parametric Analysis of the Models of Confinement of the Concrete Column

2012 ◽  
Vol 498 ◽  
pp. 1-14 ◽  
Author(s):  
Kamal Ait Tahar ◽  
F. Taouche ◽  
Y. Bouamra
Keyword(s):  
Experimental Data ◽  
Ultimate Strength ◽  
Parametric Analysis ◽  
Ultimate Strain ◽  
Confined Concrete ◽  
Concrete Column ◽  
Strength Ratio ◽  
Concrete Properties ◽  
Concrete Confinement

Existing models for the concrete confined show a great respect in terms of effectiveness of confinement. The concrete confinement which consists in preventing these strains can be carried out either by an external envelope, or by a weak spacing between the stirrups. All models consist of some modification factors multiplying the unconfined concrete properties; these modification factors depend on the strength ratio and the confinement level. The relation of the ultimate strength ‘and ultimate strain in many existing models is complexity by representing. Each author gauges his model according to the experimental data. In this study, we present the results of a parametric analysis of some the most used models of confinement. The results show that the models of confinement have an important disparity between the values of the strength (fCC) and axial ultimate strain (εcc) of confined concrete.

Sign in / Sign up

Export Citation Format

Share Document