scholarly journals Performance Analysis of a Defected Ground-Structured Antenna Loaded with Stub-Slot for 5G Communication

Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2634 ◽  
Author(s):  
Md Mushfiqur Rahman ◽  
Md Shabiul Islam ◽  
Hin Yong Wong ◽  
Touhidul Alam ◽  
Mohammad Tariqul Islam
Keyword(s):  
Ground Plane ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Electronic Band ◽  
Band Frequency ◽  
Antenna Structure ◽  
Wireless Applications ◽  
High Impedance ◽  
Electronic Band Gap ◽  
Good Agreement

In this paper, a defected ground-structured antenna with a stub-slot configuration is proposed for future 5G wireless applications. A simple stub-slot configuration is used in the patch antenna to get the dual band frequency response in the 5G mid-band and the upper unlicensed frequency region. Further, a 2-D double period Electronic band gap (EBG) structure has been implemented as a defect in the metallic ground plane to get a wider impedance bandwidth. The size of the slots and their positions are optimized to get a considerably high impedance bandwidth of 12.49% and 4.49% at a passband frequency of 3.532 GHz and 6.835 GHz, respectively. The simulated and measured realized gain and reflection coefficients are in good agreement for both operating bandwidths. The overall antenna structure size is 33.5 mm × 33.5 mm. The antenna is fabricated and compared with experimental results. The proposed antenna shows a stable radiation pattern and high realized gain with wide impedance bandwidth using the EBG structure, which are necessary for the requirements of IoT applications offered by 5G technology.

scholarly journals Dual Band Gap Coupled Antenna Design with DGS for Wireless Communications

2014 ◽  
Vol 2 (3) ◽  
pp. 51 ◽  
Author(s):  
A. Kandwal ◽  
R. Sharma ◽  
S. K. Khah
Keyword(s):  
Side Lobe ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Side Lobe Level ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Wireless Applications ◽  
X Band ◽  
Ring Antenna ◽  
Good Agreement

A novel gap coupled dual band multiple ring antenna with a defected ground structure (DGS) has been successfully implemented. A different technique is used in this communication where both gap coupling and defected ground are applied to obtain better results for wireless applications. The designed antenna operates in two different frequency bands. The antenna shows a wideband in C-band and also resonates in the X-band. The main parameters like return loss, impedance bandwidth, radiation pattern and gain are presented and discussed. The gain is increased and the side lobe level is considerably reduced to a good extent. Designed antenna is tested and the results show that the simulation and experimental results are in good agreement with each other.

scholarly journals A CPW - Fed Octagonal Ring Shaped Wide Band Antenna for Wireless Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 87-92 ◽  
Author(s):  
P. Khanna ◽  
A. Sharma ◽  
A. K. Singh ◽  
A. Kumar
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Wireless Applications ◽  
High Frequency Structure Simulator ◽  
High Impedance ◽  
Ring Antenna ◽  
Operating Bandwidth

A CPW – Fed octagonal ring shaped antenna for wideband operation is presented. The radiating patch of proposed octagonal ring antenna consists of symmetrical slot in place of conventional annular ring microstrip antenna. The ground plane consists of two rectangular slots, while the radiator and the ground plane are on same plane that utilizes the space available around the radiator. The proposed antenna is simulated through Ansoft’s High Frequency Structure Simulator (HFSS). Measured result shows balanced agreement with the simulated results. The prototype is taken with dimensions 47 mm × 47 mm × 1.6 mm that achieves good return loss, constant group delay and good radiation patterns over the entire operating bandwidth of 2.0 to 9.5 GHz (7.5 GHz). The proposed antenna achieves high impedance bandwidth of 130%. Thus, the proposed antenna is applicable for S and C band applications.

scholarly journals Dual Notched-Band Crescent Moon Dielectric Resonator Antenna

2021 ◽  
Vol 25 (1) ◽  
pp. 11-19
Author(s):  
Mohamed Debab ◽  
◽  
Amina Bendaoudi ◽  
Zoubir Mahdjoub ◽  
◽  
...  
Keyword(s):  
Frequency Band ◽  
Dielectric Resonator ◽  
Satellite Communication ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Printed Antenna ◽  
Antenna Structure

In this article, a dual-band notched ultra-wideband (UWB) dielectric resonator antenna is proposed. The antenna structure consists of Crescent Moon Dielectric Resonator (CMDR) fed by a stepped microstrip monopole printed antenna, partial ground plane, and an I-shaped stub. The Crescent Moon dielectric resonator is placed on the microstrip monopole printed antenna to achieve wide impedance bandwidth, and the I-shaped stub is utilized to improve impedance bandwidth for the WiMAX band. A comprehensive parametric study is carried out using HFSS software to achieve the optimum antenna performance and optimize the bandwidth of the proposed antenna. The entire band is useful with two filtered bands at 5.5 GHz and 6.8 GHz by the creation of notches. The band’s rejection, WLAN band (5.2–5.7 GHz), and the downlink frequency band of ITU 7 GHz-band for satellite communication (6.5–7.3 GHz) is realized by inserting G-shaped and C-shaped slots in the ground. The simulation results demonstrate that the proposed CMDR antenna achieves satisfactory UWB performance, with an impedance bandwidth of around 88.7%, covers the frequency band of 3.2 - 8.3 GHz, excluding a rejection band for the WLAN and ITU 7 GHz band. The CMDR is simulated using HFSS and CST high-frequency simulators.

CPW-fed circular-shaped fractal antenna with three iterations for UWB applications

2015 ◽  
Vol 9 (2) ◽  
pp. 373-379 ◽  
Author(s):  
Sarthak Singhal ◽  
Ankit Pandey ◽  
Amit Kumar Singh
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Fractal Antenna ◽  
Frequency Range ◽  
Fractal Structures ◽  
Antenna Structure ◽  
Uwb Applications ◽  
Good Agreement

A coplanar waveguide (CPW)-fed circular-shaped fractal antenna with third iterative orthogonal elliptical slot for ultra-wideband applications is presented. The bandwidth is enhanced by using successive iterations of radiating patch, CPW feedline, and tapered ground plane. An impedance bandwidth of 2.9–20.6 GHz is achieved. The designed antenna has omnidirectional radiation patterns along with average peak realized gain of 3.5 dB over the entire frequency range of operation. A good agreement is observed between the simulated and experimental results. This antenna structure has the advantages of miniaturized size and wide bandwidth in comparison to previously reported fractal structures.

scholarly journals Design of Dual Band Antenna with Defects on Patch and Ground for Wireless Applications

2019 ◽  
Vol 8 (2) ◽  
pp. 261-264
Keyword(s):  
Reflection Coefficient ◽  
Frequency Band ◽  
Patch Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Band Frequency ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Dual Band Antenna ◽  
Simulation Results

In this paper, a rectangular patch antenna with slits for dual band capabilities is presented. The suggested antenna works for two frequencies which are at 2.5 GHz and 5.1 GHz. The first operating frequency is in the band of 2.3 to 2.7GHz with -16.8dB reflection coefficient at 2.5GHz resonating frequency, whereas the second band is 4.6 to 5.5GHz with -29.2dB reflection coefficient at 5.1GHz resonating frequency. The simulation results exhibit that, the suggested antenna works for dual band frequency having impedance bandwidth of 482 and 844 MHz respectively. The gain is observed as 2.9 dBi and 4.2 dBi of respective bands. The first frequency band can be used for Industrial, Scientific and Medical(ISM) applications and second frequency band can be used for C-band applications.

scholarly journals A Compact CPW-Fed UWB Antenna with Dual Band-Notched Characteristics

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Aiting Wu ◽  
Boran Guan
Keyword(s):  
Simple Structure ◽  
Ground Plane ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Uwb Antenna ◽  
Compact Size ◽  
Excellent Candidate ◽  
Uwb Applications ◽  
Good Agreement

A compact CPW-fed planar UWB antenna with dual band-notched property is presented. The dual band rejection is achieved by etching a C-shaped slot on the radiation patch and two L-shaped parasitic strips in the ground plane. The experimental and measured results show that the proposed antenna exhibits an impedance bandwidth over an ultrawideband frequency range from 2.4 to 12.5 GHz with VSWR less than 2, except for two stopbands at 3.3 to 3.75 GHz and 5.07 to 5.83 GHz for filtering the WiMAX and WLAN signals, respectively. It also demonstrates a nearly omnidirectional radiation pattern. The fabricated antenna has a tiny size, only 32 mm × 32 mm × 0.508 mm. The simulated results are compared with the measured performance and show good agreement. The simple structure, compact size, and good characteristics make the proposed antenna an excellent candidate for UWB applications.

Dual-band stacked circularly polarized microstrip antenna for S and C band applications

2015 ◽  
Vol 8 (8) ◽  
pp. 1215-1222 ◽  
Author(s):  
Sachin Kumar ◽  
Abhishek Sharma ◽  
Binod K. Kanaujia ◽  
Mukesh K. Khandelwal ◽  
Anil Kumar Gautam
Keyword(s):  
Circular Polarization ◽  
Microstrip Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Radiation Characteristics ◽  
Antenna Structure ◽  
Circularly Polarized ◽  
Patch Structure ◽  
Dual Band Antenna ◽  
Good Agreement

A single-fed circularly polarized microstrip antenna is proposed where the antenna structure exhibits truncated corners in the radiating square patch. The truncated corners square patch structure is loaded with a circular slot and is resonating at 2.25 GHz with circular polarization. Furthermore, the proposed antenna is stacked using an upper circular patch thus achieving a dual-band circularly polarized pattern. The dual-band antenna resonates at 2.25 GHz in the first band and with impedance bandwidth ranging from 4.4 to 5.5 GHz in the second band. The size of the proposed stacked structure is compact compared with the conventional circularly polarized stacked antenna designs. Proposed structures are fabricated and fed using Subminiature version A (SMA) connector. The measured results are in good agreement with the simulated. The antenna shows stable radiation characteristics for the entire band of operation.

scholarly journals Flexible Design of EGB Structure for Antenna Appliations

2013 ◽  
Author(s):  
Huynh Nguyen Bao Phuong
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Dual Band ◽  
Flexible Design ◽  
Electromagnetic Bandgap ◽  
High Impedance ◽  
Radiation Properties ◽  
Unit Cells ◽  
Simulation Results ◽  
Good Agreement

In  this paper,  we  present  a  flexible  design of  electromagnetic  bandgap  (EBG)  structure,  which  is constructed  based  on  Fractal  geometry,  for  antenna applications.  These  Fractals,  which  are  the  Sierpinski triangles,  are  arranged  to  repeat  each 600to  introduce the  hexagonal  unit  cells.  By  changing  the  gap  between two adjacent Sierpinski triangles inside EBG unit cell, it can  be  introducing  two  EBG  structuresseparately  that have  broadband  and  dual  bandgap.  By  using  the suspending  microstrip  method, two arrays 3×4  of  EBG unit  cells  areutilized  to  investigate  the  bandgap  of  the EBG  structures.  The  EBG  operation  bandwidth  of  the broadband  structure  and  the  dual-band  structure  are about  87%  and  40%;  35%  at  the  center  bandgap frequencies,  respectively.  Moreover,  a  comparison between  the  broadband  EBG  and  the  conventional mushroom-like  EBG  has  been  done.  Experimental results  of  the  proposed  design  show  good  agreement  in comparison  with  simulation  results.  Finally,  the proposed  EBG  structures  are  studied  as  a  high impedance  ground  plane  for  enhancing  the  radiation properties of a patch antenna.

An ultra-wideband rectangular ring dielectric resonator antenna integrated with hybrid shaped patch for wireless applications

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Parikshit Vasisht ◽  
Robert Mark ◽  
Neela Chattoraj
Keyword(s):  
Dielectric Resonator ◽  
Ground Plane ◽  
Radiation Efficiency ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Wireless Applications ◽  
High Impedance ◽  
Conductor Loss ◽  
Uwb Applications

Abstract A new wideband omni-directional compact rectangular ring dielectric resonator antenna (RRDRA) fused with slotted bevel shaped patch antenna is presented for the ultra-wideband (UWB) applications. The RRDR (rectangular ring dielectric resonator) is employed to generate lower order radiating modes with merge with the modes of patch to obtain high impedance bandwidth in UWB region. Further, RRDR use led to reduction in overall conductor loss to achieve high radiation efficiency. The proposed RRDRA structure achieved an impedance bandwidth covering the frequency range from 2.6–15.6 GHz, or ∼142%. The measured results show that the proposed DRA provides peak measured gain of 6.2 dBi and radiation efficiency of 90% at resonant frequency 6.3 GHz with stable omni-directional monopole like radiation patterns with low cross-polarization. The proposed antenna has a short ground plane of size 40 × 40 × 11.6 mm3 or ∼0.34λ 0 × 0.34λ 0 × 0.10λ 0 at 2.6 GHz.

scholarly journals A Compact Dual-Band Notched UWB Antenna for Wireless Applications

Micromachines ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 12
Author(s):  
Om Prakash Kumar ◽  
Pramod Kumar ◽  
Tanweer Ali
Keyword(s):  
Radiation Pattern ◽  
Group Delay ◽  
Ground Plane ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Linear Phase ◽  
Uwb Antenna ◽  
Rectangular Slot ◽  
Wireless Applications ◽  
Phase Group

This article presents the design and analysis of a V-shaped ultrawideband (UWB) antenna and dual-band UWB notch antenna. A rectangular slot is cut into a semicircular partial ground plane of the antenna to achieve ultrawide bandwidth. A U-shape slot is etched on a V-shaped patch that radiates, and an inverted U-shape parasitic resonator is placed beside the feedline to generate dual-band notch characteristics. The overall dimension of the proposed antenna is 28×23 mm2. The proposed UWB antenna has a gain of 9.8 dB, S11 < −10 dB, impedance bandwidth in the range of 3.4 to 12.3 GHz, response with a linear phase, group delay <1 ns, and stable radiation pattern. The UWB notch antenna shows strong rejection in the WLAN band from 5.15 to 5.8 GHz with a notch at 5.6 GHz and X band from 9.1 to 10.5 GHz with a sharp notch at 9.6 GHz, having a S11 < −10 dB impedance bandwidth ranging from 3.2 to 11.7 GHz. This antenna also exhibits a stable radiation pattern, group delay <1 ns, and linear phase response throughout the bandwidth except at the rejection frequencies.

Sign in / Sign up

Export Citation Format

Share Document