scholarly journals An Indoor Localization Method for Pedestrians Base on Combined UWB/PDR/Floor Map

Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2578 ◽  
Author(s):  
Fei Liu ◽  
Jian Wang ◽  
Jixian Zhang ◽  
Houzeng Han

This paper propose a scheme for indoor pedestrian location, based on UWB (Ultra Wideband)/PDR (Pedestrian Dead Reckoning) and Floor Map data. Firstly, a robust algorithm that uses Tukey weight factor and a pathological parameter for UWB positioning is proposed. The ill-conditioned position problem is solved for a scene where UWB anchors are placed on the same elevation of a narrow corridor. Secondly, a heading angle-computed strategy of PDR is put forward. According to the UWB positioning results, the location of pedestrians is mapped to the Floor Map, and 16 possible azimuth directions with 22.5° interval in this position are designed virtually. Compared to the heading angle of PDR, the center direction of the nearest interval is adopted as the heading. However, if the difference between the head angles of PDR and the nearest map direction is less than five degrees, the heading angle of PDR is regarded as the moving heading. Thirdly, an EKF (Extended Kalman Filter) algorithm is suggested for UWB/PDR/Floor Map fusion. By utilizing the positioning results of UWB, PDR, and the possible heading angle of Floor Map, high precision positioning results are acquired. Finally, two experimental scenarios are designed in a narrow corridor and computer room at a university. The accuracy of pedestrian positioning when all the data are available is verified in the first scenario; the positioning accuracy of a situation where part of UWB is unlock is verified in the second scenario. The results show that the proposed scheme can reliably achieve decimeter-level positioning.

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1463 ◽  
Author(s):  
André G. Ferreira ◽  
Duarte Fernandes ◽  
André P. Catarino ◽  
Ana M. Rocha ◽  
João L. Monteiro

Combining different technologies is gaining significant popularity among researchers and industry for the development of indoor positioning systems (IPSs). These hybrid IPSs emerge as a robust solution for indoor localization as the drawbacks of each technology can be mitigated or even eliminated by using complementary technologies. However, fusing position estimates from different technologies is still very challenging and, therefore, a hot research topic. In this work, we pose fusing the ultrawideband (UWB) position estimates with the estimates provided by a pedestrian dead reckoning (PDR) by using a Kalman filter. To improve the IPS accuracy, a decision-making algorithm was developed that aims to assess the usability of UWB measurements based on the identification of non-line-of-sight (NLOS) conditions. Three different data fusion algorithms are tested, based on three different time-of-arrival positioning algorithms, and experimental results show a localization accuracy of below 1.5 m for a 99th percentile.


IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 183514-183523 ◽  
Author(s):  
Danyang Li ◽  
Yumeng Lu ◽  
Jingao Xu ◽  
Qiang Ma ◽  
Zhuo Liu

2014 ◽  
Vol 701-702 ◽  
pp. 989-993
Author(s):  
Wen Bin Yu ◽  
Peng Li ◽  
Zhi Chen ◽  
Chang Li

Recently, indoor localization is essential to enable location-based services for many mobile and social network applications. Due to fluctuation of the wireless signal, the accuracy of a simple WiFi fingerprint-based localization is not high. In this paper, we first exploit Pedestrian Dead Reckoning (PDR) technology to overcome the problem of the wireless signal fluctuation, then propose a PDR-aided algorithm with WiFi fingerprint matching for indoor localization, which using the PDR technology aided indoor localization. Experiments show that our algorithm has better accuracy than other indoor localization methods.


2021 ◽  
Vol 2 (2) ◽  
pp. 119-126
Author(s):  
Anggreini Intan Permata Sari ◽  
Arkham Zahri Rakhman

Indoor localization is one of the more accurate technologies to be used to determine indoors or buildings. Pedestrian Dead Reckoning (PDR) is a method of determining the user's position by adding a method that occurs to a known initial position. The displacement that occurs is estimated with the help of an accelerometer sensor attached to the user as a step detector and to determine the direction towards the user using a gyroscope sensor. System testing is carried out in the Institut Teknologi Sumatera’s campus environment on the 2nd floor of Building C and D. The results from the detection of steps get an error rate of 1.13% using a threshold of 0.8.


Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8180
Author(s):  
Jijun Geng ◽  
Linyuan Xia ◽  
Jingchao Xia ◽  
Qianxia Li ◽  
Hongyu Zhu ◽  
...  

Indoor localization based on pedestrian dead reckoning (PDR) is drawing more and more attention of researchers in location-based services (LBS). The demand for indoor localization has grown rapidly using a smartphone. This paper proposes a 3D indoor positioning method based on the micro-electro-mechanical systems (MEMS) sensors of the smartphone. A quaternion-based robust adaptive cubature Kalman filter (RACKF) algorithm is proposed to estimate the heading of pedestrians based on magnetic, angular rate, and gravity (MARG) sensors. Then, the pedestrian behavior patterns are distinguished by detecting the changes of pitch angle, total accelerometer and barometer values of the smartphone in the duration of effective step frequency. According to the geometric information of the building stairs, the step length of pedestrians and the height difference of each step can be obtained when pedestrians go up and downstairs. Combined with the differential barometric altimetry method, the optimal height can be computed by the robust adaptive Kalman filter (RAKF) algorithm. Moreover, the heading and step length of each step are optimized by the Kalman filter to reduce positioning error. In addition, based on the indoor map vector information, this paper proposes a heading calculation strategy of the 16-wind rose map to improve the pedestrian positioning accuracy and reduce the accumulation error. Pedestrian plane coordinates can be solved based on the Pedestrian Dead-Reckoning (PDR). Finally, combining pedestrian plane coordinates and height, the three-dimensional positioning coordinates of indoor pedestrians are obtained. The proposed algorithm is verified by actual measurement examples. The experimental verification was carried out in a multi-story indoor environment. The results show that the Root Mean Squared Error (RMSE) of location errors is 1.04–1.65 m by using the proposed algorithm for three participants. Furthermore, the RMSE of height estimation errors is 0.17–0.27 m for three participants, which meets the demand of personal intelligent user terminal for location service. Moreover, the height parameter enables users to perceive the floor information.


IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Rashid Ali ◽  
Ran Liu ◽  
Anand Nayyar ◽  
Basit Qureshi ◽  
Zhiqiang Cao

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 763 ◽  
Author(s):  
Ryosuke Ichikari ◽  
Katsuhiko Kaji ◽  
Ryo Shimomura ◽  
Masakatsu Kourogi ◽  
Takashi Okuma ◽  
...  

The performance of indoor localization methods is highly dependent on the situations in which they are used. Various competitions on indoor localization have been held for fairly comparing the existing indoor localization methods in shared and controlled testing environments. However, it is difficult to evaluate the practical performance in industrial scenarios through the existing competitions. This paper introduces two indoor localization competitions, which are named the “PDR Challenge in Warehouse Picking 2017” and “xDR Challenge for Warehouse Operations 2018” for tracking workers and vehicles in a warehouse scenario. For the PDR Challenge in Warehouse Picking 2017, we conducted a unique competition based on the data measured during the actual picking operation in an actual warehouse. We term the dead-reckoning of a vehicle as vehicle dead-reckoning (VDR), and the term “xDR” is derived from pedestrian dead-reckoning (PDR) plus VDR. As a sequel competition of the PDR Challenge in Warehouse Picking 2017, the xDR Challenge for Warehouse Operations 2018 was conducted as the world’s first competition that deals with tracking forklifts by VDR with smartphones. In the paper, first, we briefly summarize the existing competitions, and clarify the characteristics of our competitions by comparing them with other competitions. Our competitions have the unique capability of evaluating the practical performance in a warehouse by using the actual measured data as the test data and applying multi-faceted evaluation metrics. As a result, we successfully organize the competitions due to the many participants from many countries. As a conclusion of the paper, we summarize the findings of the competitions.


Sign in / Sign up

Export Citation Format

Share Document