scholarly journals The Influence of Satellite Configuration and Fault Duration Time on the Performance of Fault Detection in GNSS/INS Integration

Sensors ◽  
2019 ◽  
Vol 19 (9) ◽  
pp. 2147 ◽  
Author(s):  
Chuang Zhang ◽  
Xiubin Zhao ◽  
Chunlei Pang ◽  
Liang Zhang ◽  
Bo Feng
Keyword(s):  
Fault Detection ◽  
Real Time ◽  
Inertial Navigation System ◽  
Satellite System ◽  
Detection Performance ◽  
Chi Square ◽  
Duration Time ◽  
Single Epoch ◽  
Global Navigation Satellite ◽  
Detectable Bias

For the integration of global navigation satellite system (GNSS) and inertial navigation system (INS), real-time and accurate fault detection is essential to enhance the reliability and precision of the system. Among the existing methods, the residual chi-square detection is still widely used due to its good real-time performance and sensibility of fault detection. However, further investigation on the performance of fault detection for different observational conditions and fault models is still required. In this paper, the principle of chi-square detection based on the predicted residual and least-squares residual is analyzed and the equivalence between them is deduced. Then, choosing the chi-square detection based on the predicted residual as the research object, the influence of satellite configuration and fault duration time on the performance of fault detection is analyzed in theory. The influence of satellite configuration is analyzed from the number and geometry of visible satellites. Several numerical simulations are conducted to verify the theoretical analysis. The results show that, for a single-epoch fault, the location of faulty measurement and the geometry have little effect on the performance of fault detection, while the number of visible satellites has greater influence on the fault detection performance than the geometry. For a continuous fault, the fault detection performance will decrease with the increase of fault duration time when the value of the fault is near the minimal detectable bias (MDB), and faults occurring on different satellite’s measurement will result in different detection results.

scholarly journals Covariance Analysis of Real-Time Precise GPS Orbit Estimated from Double-Differenced Carrier Phase Observations

2019 ◽  
Vol 11 (19) ◽  
pp. 2271 ◽  
Author(s):  
Sunkyoung Yu ◽  
Donguk Kim ◽  
Junesol Song ◽  
Changdon Kee
Keyword(s):  
Fault Detection ◽  
Real Time ◽  
Global Positioning System ◽  
Carrier Phase ◽  
Satellite System ◽  
Additional Parameter ◽  
Global Positioning ◽  
Correlation Information ◽  
Global Navigation Satellite ◽  
Orbit Errors

The covariance of real-time global positioning system (GPS) orbits has been drawing attention in various fields such as user integrity, navigation performance improvement, and fault detection. The international global navigation satellite system (GNSS) service (IGS) provides real-time orbit standard deviations without correlations between the axes. However, without correlation information, the provided covariance cannot assure the performance of the orbit product, which would, in turn, causes significant problems in fault detection and user integrity. Therefore, we studied real-time GPS orbit covariance characteristics along various coordinates to effectively provide conservative covariance. To this end, the covariance and precise orbits are estimated by means of an extended Kalman filter using double-differenced carrier phase observations of 61 IGS reference stations. Furthermore, we propose a new method for providing covariance to minimize loss of correlation. The method adopted by the IGS, which neglects correlation, requires 4.5 times the size of the covariance to bind orbit errors. By comparison, our proposed method reduces this size from 4.5 to 1.3 using only one additional parameter. In conclusion, the proposed method effectively provides covariance to users.

scholarly journals Analysis of BDS/GPS Signals’ Characteristics and Navigation Accuracy for a Geostationary Satellite

2021 ◽  
Vol 13 (10) ◽  
pp. 1967
Author(s):  
Meng Wang ◽  
Tao Shan ◽  
Wanwei Zhang ◽  
Hao Huan
Keyword(s):  
Real Time ◽  
High Sensitivity ◽  
The United States ◽  
Satellite System ◽  
Least Square ◽  
Navigation Satellite ◽  
Position Accuracy ◽  
The Mean ◽  
Single Epoch ◽  
Global Navigation Satellite

The utilization of Global Navigation Satellite System (GNSS) is becoming an attractive navigation approach for geostationary orbit (GEO) satellites. A high-sensitivity receiver compatible with Global Position System (GPS) developed by the United States and BeiDou Navigation Satellite System (BDS) developed by China has been used in a GEO satellite named TJS-5 to demonstrate feasibility of real-time navigation. According to inflight data, the GNSS signal characteristics including availability, position dilution of precision (PDOP), carrier-to-noise ratio (C/N0), observations quantity and accuracy are analyzed. The mean number of GPS and GPS + BDS satellites tracked are 7.4 and 11.7 and the mean PDOP of GPS and GPS + BDS are 10.24 and 3.91, respectively. The use of BDS significantly increases the number of available navigation satellites and improves the PDOP. The number of observations with respect to C/N0 is illustrated in detail. The standard deviation of the pseudorange noises are less than 4 m, and the corresponding carrier phase noises are mostly less than 8 mm. We present the navigation performance using only GPS observations and GPS + BDS observations combination at different weights through comparisons with the precision reference orbits. When GPS combined with BDS observations, the root mean square (RMS) of the single-epoch least square position accuracy can improve from 32.1 m to 16.5 m and the corresponding velocity accuracy can improve from 0.238 m/s to 0.165 m/s. The RMS of real-time orbit determination position accuracy is 5.55 m and the corresponding velocity accuracy is 0.697 mm/s when using GPS and BDS combinations. Especially, the position accuracy in x-axis direction reduced from 7.24 m to 4.09 m when combined GPS with BDS observations.

scholarly journals Methodology for the Correction of the Spatial Orientation Angles of the Unmanned Aerial Vehicle Using Real Time GNSS, a Shoreline Image and an Electronic Navigational Chart

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2810
Author(s):  
Krzysztof Naus ◽  
Piotr Szymak ◽  
Paweł Piskur ◽  
Maciej Niedziela ◽  
Aleksander Nowak
Keyword(s):  
Real Time ◽  
Spatial Orientation ◽  
Orientation Angle ◽  
Satellite System ◽  
Angle Measurement ◽  
Angle Correction ◽  
Lidar Measurements ◽  
Aerial Vehicle ◽  
Marine Applications ◽  
Global Navigation Satellite

Undoubtedly, Low-Altitude Unmanned Aerial Vehicles (UAVs) are becoming more common in marine applications. Equipped with a Global Navigation Satellite System (GNSS) Real-Time Kinematic (RTK) receiver for highly accurate positioning, they perform camera and Light Detection and Ranging (LiDAR) measurements. Unfortunately, these measurements may still be subject to large errors-mainly due to the inaccuracy of measurement of the optical axis of the camera or LiDAR sensor. Usually, UAVs use a small and light Inertial Navigation System (INS) with an angle measurement error of up to 0.5∘ (RMSE). The methodology for spatial orientation angle correction presented in the article allows the reduction of this error even to the level of 0.01∘ (RMSE). It can be successfully used in coastal and port waters. To determine the corrections, only the Electronic Navigational Chart (ENC) and an image of the coastline are needed.

APLICAÇÃO DE GEOTECNOLOGIAS NA ANÁLISE DE VIABILIDADE TÉCNICA E ECONÔMICA DO PROJETO DE IMPLANTAÇÃO DO IFMA - CAMPUS ITAQUI-BACANGA.

2021 ◽  
Vol 14 (2) ◽  
pp. 105
Author(s):  
Maelckson Bruno Barros Gomes ◽  
André Luis Silva Santos
Keyword(s):  
Real Time ◽  
Global Navigation Satellite System ◽  
Satellite System ◽  
Navigation Satellite ◽  
Real Time Kinematic ◽  
Global Navigation ◽  
Global Navigation Satellite

<p class="04CorpodoTexto">Este artigo tem por objetivo aplicar geotecnologias para obtenção de informações planialtimétricas a fim de avaliar a viabilidade de implantação do campus Centro Histórico/Itaqui-Bacanga do IFMA. Considerando que para realização de levantamento por métodos tradicionais é recomendado que seja realizado o destocamento e a limpeza do terreno previamente, avaliou-se a realização do levantamento planialtimétrico a partir de um par de receptores <em>Global Navigation Satellite System</em> (GNSS) pelo método <em>Real Time Kinematic</em> (RTK) pós processado e também a partir da realização de levantamento fotogramétrico, utilizando aeronave remotamente pilotada (ARP), popularmente conhecida como drone. Esta análise permitiu demonstrar que o aerolevantamento com a ARP pode ser aplicado na concepção inicial de um projeto de engenharia, conforme classificação do Tribunal de Contas da União (TCU) para níveis de precisão, pois obteve-se uma diferença orçamentária de 19% entre os projetos elaborados a partir das duas geotecnologias.</p><div> </div>

scholarly journals Online Near real-time Mine Disaster Monitoring System Based on Geosensor Networks

2016 ◽  
Vol 12 (03) ◽  
pp. 64
Author(s):  
Haifeng Hu
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Satellite System ◽  
Open Pit ◽  
Observation Data ◽  
Complex Data ◽  
Disaster Monitoring ◽  
Process Observation ◽  
Global Navigation Satellite ◽  
Safety And Stability

Abstract—An online automatic disaster monitoring system can reduce or prevent geological mine disasters to protect life and property. Global Navigation Satellite System receivers and the GeoRobot are two kinds of in-situ geosensors widely used for monitoring ground movements near mines. A combined monitoring solution is presented that integrates the advantages of both. In addition, a geosensor network system to be used for geological mine disaster monitoring is described. A complete online automatic mine disaster monitoring system including data transmission, data management, and complex data analysis is outlined. This paper proposes a novel overall architecture for mine disaster monitoring. This architecture can seamlessly integrate sensors for long-term, remote, and near real-time monitoring. In the architecture, three layers are used to collect, manage and process observation data. To demonstrate the applicability of the method, a system encompassing this architecture has been deployed to monitor the safety and stability of a slope at an open-pit mine in Inner Mongolia.

Leveraging Intelligent Compaction and Thermal Profiling Technologies to Improve Asphalt Pavement Construction Quality: A Case Study

2018 ◽  
Vol 2672 (26) ◽  
pp. 48-56 ◽  
Author(s):  
George K. Chang ◽  
Kiran Mohanraj ◽  
William A. Stone ◽  
Daniel J. Oesch ◽  
Victor (Lee) Gallivan
Keyword(s):  
Real Time ◽  
Satellite System ◽  
Material Transfer ◽  
Intelligent Compaction ◽  
Two Factors ◽  
Thermal Profiling ◽  
Compaction Control ◽  
Pavement Construction ◽  
Global Navigation Satellite

Intelligent compaction (IC) is an emerging technology with rollers equipped with global navigation satellite system (GNSS), an accelerometer-based measurement system, and an onboard color-coded display for real-time monitoring and compaction control. Paver-mounted thermal profiling (PMTP) is used to monitor asphalt surface temperatures behind a paver with a thermal scanner, and to track paver speeds, stops, and stop durations. Leveraging both IC and PMTP technologies allows for paving and compaction controls in real time, and for executing appropriate adjustments as needed. A case study is used to demonstrate the advantage of using both IC and PMTP over conventional operations. Postconstruction asphalt coring and tests, as well as pavement profile surveys were conducted to provide asphalt density data and pavement smoothness acceptance data for comparison and correlation analysis with IC and PMTP data. The data from 2 days of operations, one without the Material Transfer Vehicle (MTV) and another with the MTV, were analyzed and compared to illustrate the benefits of using IC, PMTP, and MTV for producing quality pavement products. Durability and smoothness are two key construction qualities for agencies and users of hot mix asphalt (HMA) pavements. These two factors also affect the long-term structural and functional pavement performance.

scholarly journals Real-Time Precise Point Positioning Using Orbit and Clock Corrections as Quasi-Observations for Improved Detection of Faults

2018 ◽  
Vol 71 (4) ◽  
pp. 769-787 ◽  
Author(s):  
Ahmed El-Mowafy
Keyword(s):  
Real Time ◽  
Precise Point Positioning ◽  
Exclusion Process ◽  
Satellite Orbit ◽  
Satellite System ◽  
Navigation Satellite ◽  
System Service ◽  
Point Positioning ◽  
Predicted Values ◽  
Global Navigation Satellite

Real-time Precise Point Positioning (PPP) relies on the use of accurate satellite orbit and clock corrections. If these corrections contain large errors or faults, either from the system or by meaconing, they will adversely affect positioning. Therefore, such faults have to be detected and excluded. In traditional PPP, measurements that have faulty corrections are typically excluded as they are merged together. In this contribution, a new PPP model that encompasses the orbit and clock corrections as quasi-observations is presented such that they undergo the fault detection and exclusion process separate from the observations. This enables the use of measurements that have faulty corrections along with predicted values of these corrections in place of the excluded ones. Moreover, the proposed approach allows for inclusion of the complete stochastic information of the corrections. To facilitate modelling of the orbit and clock corrections as quasi-observations, International Global Navigation Satellite System Service (IGS) real-time corrections were characterised over a six-month period. The proposed method is validated and its benefits are demonstrated at two sites using three days of data.

scholarly journals Multi-GNSS Combined Precise Point Positioning Using Additional Observations with Opposite Weight for Real-Time Quality Control

2019 ◽  
Vol 11 (3) ◽  
pp. 311 ◽  
Author(s):  
Wenju Fu ◽  
Guanwen Huang ◽  
Yuanxi Zhang ◽  
Qin Zhang ◽  
Bobin Cui ◽  
...  
Keyword(s):  
Quality Control ◽  
Real Time ◽  
Precise Point Positioning ◽  
Satellite System ◽  
Convergence Time ◽  
Navigation Satellite ◽  
Positioning Accuracy ◽  
Global Navigation ◽  
Point Positioning ◽  
Global Navigation Satellite

The emergence of multiple global navigation satellite systems (multi-GNSS), including global positioning system (GPS), global navigation satellite system (GLONASS), Beidou navigation satellite system (BDS), and Galileo, brings not only great opportunities for real-time precise point positioning (PPP), but also challenges in quality control because of inevitable data anomalies. This research aims at achieving the real-time quality control of the multi-GNSS combined PPP using additional observations with opposite weight. A robust multiple-system combined PPP estimation is developed to simultaneously process observations from all the four GNSS systems as well as single, dual, or triple systems. The experiment indicates that the proposed quality control can effectively eliminate the influence of outliers on the single GPS and the multiple-system combined PPP. The analysis on the positioning accuracy and the convergence time of the proposed robust PPP is conducted based on one week’s data from 32 globally distributed stations. The positioning root mean square (RMS) error of the quad-system combined PPP is 1.2 cm, 1.0 cm, and 3.0 cm in the east, north, and upward components, respectively, with the improvements of 62.5%, 63.0%, and 55.2% compared to those of single GPS. The average convergence time of the quad-system combined PPP in the horizontal and vertical components is 12.8 min and 12.2 min, respectively, while it is 26.5 min and 23.7 min when only using single-GPS PPP. The positioning performance of the GPS, GLONASS, and BDS (GRC) combination and the GPS, GLONASS, and Galileo (GRE) combination is comparable to the GPS, GLONASS, BDS and Galileo (GRCE) combination and it is better than that of the GPS, BDS, and Galileo (GCE) combination. Compared to GPS, the improvements of the positioning accuracy of the GPS and GLONASS (GR) combination, the GPS and Galileo (GE) combination, the GPS and BDS (GC) combination in the east component are 53.1%, 43.8%, and 40.6%, respectively, while they are 55.6%, 48.1%, and 40.7% in the north component, and 47.8%, 40.3%, and 34.3% in the upward component.

Sign in / Sign up

Export Citation Format

Share Document