scholarly journals Sensor Fusion and State Estimation of IoT Enabled Wind Energy Conversion System

Sensors ◽  
2019 ◽  
Vol 19 (7) ◽  
pp. 1566 ◽  
Author(s):  
Md. Noor-A-Rahim ◽  
M. Khyam ◽  
Xinde Li ◽  
Dirk Pesch
Keyword(s):  
Renewable Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Wireless Channel ◽  
The State ◽  
Fusion Algorithm ◽  
Control Center ◽  
Communication Framework

The use of renewable energy has increased dramatically over the past couple of decades. Wind farms, consisting of wind turbines, play a vital role in the generation of renewable energy. For monitoring and maintenance purposes, a wind turbine has a variety of sensors to measure the state of the turbine. Sensor measurements are transmitted to a control center, which is located away from the wind farm, for monitoring and maintenance purposes. It is therefore desirable to ensure reliable wireless communication between the wind turbines and the control center while integrating the observations from different sensors. In this paper, we propose an IoT based communication framework for the purpose of reliable communication between wind turbines and control center. The communication framework is based on repeat-accumulate coded communication to enhance reliability. A fusion algorithm is proposed to exploit the observations from multiple sensors while taking into consideration the unpredictable nature of the wireless channel. The numerical results show that the proposed scheme can closely predict the state of a wind turbine. We also show that the proposed scheme significantly outperforms traditional estimation schemes.

scholarly journals Floating Performance of a Composite Bucket Foundation with an Offshore Wind Tower during Transportation

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 882 ◽  
Author(s):  
Hongyan Ding ◽  
Zuntao Feng ◽  
Puyang Zhang ◽  
Conghuan Le ◽  
Yaohua Guo
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Interaction Force ◽  
Offshore Wind ◽  
Construction Technique ◽  
Bucket Foundation ◽  
Offshore Wind Turbines ◽  
One Step

The composite bucket foundation (CBF) for offshore wind turbines is the basis for a one-step integrated transportation and installation technique, which can be adapted to the construction and development needs of offshore wind farms due to its special structural form. To transport and install bucket foundations together with the upper portion of offshore wind turbines, a non-self-propelled integrated transportation and installation vessel was designed. In this paper, as the first stage of applying the proposed one-step integrated construction technique, the floating behavior during the transportation of CBF with a wind turbine tower for the Xiangshui wind farm in the Jiangsu province was monitored. The influences of speed, wave height, and wind on the floating behavior of the structure were studied. The results show that the roll and pitch angles remain close to level during the process of lifting and towing the wind turbine structure. In addition, the safety of the aircushion structure of the CBF was verified by analyzing the measurement results for the interaction force and the depth of the liquid within the bucket. The results of the three-DOF (degree of freedom) acceleration monitoring on the top of the test tower indicate that the wind turbine could meet the specified acceleration value limits during towing.

Floating Offshore Wind Turbines: Responses in a Seastate Pareto Optimal Designs and Economic Assessment

2008 ◽  
Author(s):  
Paul Sclavounos ◽  
Christopher Tracy ◽  
Sungho Lee
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Economic Assessment ◽  
Offshore Wind ◽  
Pareto Optimal ◽  
Mooring System ◽  
Floating Structure ◽  
Water Depths

Wind is the fastest growing renewable energy source, increasing at an annual rate of 25% with a worldwide installed capacity of 74 GW in 2007. The vast majority of wind power is generated from onshore wind farms. Their growth is however limited by the lack of inexpensive land near major population centers and the visual pollution caused by large wind turbines. Wind energy generated from offshore wind farms is the next frontier. Large sea areas with stronger and steadier winds are available for wind farm development and 5MW wind turbine towers located 20 miles from the coastline are invisible. Current offshore wind turbines are supported by monopoles driven into the seafloor at coastal sites a few miles from shore and in water depths of 10–15m. The primary impediment to their growth is visual pollution and the prohibitive cost of seafloor mounted monopoles in larger water depths. This paper presents a fully coupled dynamic analysis of floating wind turbines that enables a parametric design study of floating wind turbine concepts and mooring systems. Pareto optimal designs are presented that possess a favorable combination of nacelle acceleration, mooring system tension and displacement of the floating structure supporting a five megawatt wind turbine. All concepts are selected so that they float stably while in tow to the offshore wind farm site and prior to their connection to the mooring system. A fully coupled dynamic analysis is carried out of the wind turbine, floater and mooring system in wind and a sea state based on standard computer programs used by the offshore and wind industries. The results of the parametric study are designs that show Pareto fronts for mean square acceleration of the turbine versus key cost drivers for the offshore structure that include the weight of the floating structure and the static plus dynamic mooring line tension. Pareto optimal structures are generally either a narrow deep drafted spar, or a shallow drafted barge ballasted with concrete. The mooring systems include both tension leg and catenary mooring systems. In some of the designs, the RMS acceleration of the wind turbine nacelle can be as low as 0.03 g in a sea state with a significant wave height of ten meters and water depths of up to 200 meters. These structures meet design requirements while possessing a favorable combination of nacelle accleration, total mooring system tension and weight of the floating structure. Their economic assessment is also discussed drawing upon a recent financial analysis of a proposed offshore wind farm.

Progressive Drift of Moored Floating Wind Turbines in a Wind Farm: Improved Mooring Capacity Model

2011 ◽  
Author(s):  
Hideyuki Suzuki ◽  
Yu Kitahara ◽  
Yukinari Fukumoto
Keyword(s):  
Wind Turbine ◽  
Safety Factor ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Floating Platform ◽  
Main Research ◽  
Electric Power Supply ◽  
Analysis And Design ◽  
Wide Range

A wide range of platform concepts have been investigated for a floating wind turbine. So far analysis and design of motion characteristics of the platform is main research concern. One key research area less focused is floating platform related risk. If the wind energy would be one of the major sources of electric power supply, wind farms which are comprised of large number of floating wind turbines must be deployed in the ocean. Wind turbines are relatively closely arranged in a wind farm. In such an arrangement, a wind turbine accidentally started drifting will have some possibility to collide with floater and moorings of neighboring moored floating wind turbines, and might initiate another drift which might cause progressive drifting of wind turbines. In the previous report, a scenario of progressive drifting of wind turbines was investigated and associated risk was formulated. Quantitative risk of several arrangements of wind farm was estimated. Effects of arrangement of wind turbines in a wind farm and safety factor used in the design of moorings is discussed. Probability of initial drift was evaluated analyzing past records of accidents and design of mooring. In this research, strength of mooring system was modeled more precisely and probabilistic model was developed considering aged deterioration. Risk of progressive drifting was evaluated and safety factor required to realize a acceptable risk of a wind farm was discussed.

scholarly journals Assessing the effect of wind farms in fauna with a mathematical model

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Pablo Refoyo Román ◽  
Cristina Olmedo Salinas ◽  
Benito Muñoz Araújo
Keyword(s):  
Mathematical Model ◽  
Renewable Energy ◽  
Wind Turbines ◽  
Energy Production ◽  
Wind Farm ◽  
Considerable Increase ◽  
Wind Farms ◽  
Mathematical Algorithm ◽  
The World

Abstract Energy production by wind turbines has many advantages. The wind is a renewable energy that does not emit greenhouse gases and has caused a considerable increase in wind farms around the world. However, this type of energy is not completely free of impact. In particular, wind turbines displace and kill a wide variety of wild species what forces us to plan their location well. In any case, the determination of the effects of wind farms on fauna, especially the flying one, is difficult to determine and depends on several factors. In this work, we will try to establish a mathematical algorithm that allows us to combine all variables that affect the species with the idea of quantifying the effect that can cause the installation of a wind farm with certain characteristics in a given place. We have considered specific parameters of wind farms, the most relevant environmental characteristics related to the location of the wind farm, and morphological, ethological and legal characteristics in the species. Two types of assessment are established for the definitive valuation. Total Assessment and Weighted Assessment. Total Valuation is established based on a reference scale that will allow us to establish categories of affection for the different species while Weighted valuation allows us to establish which species are most affected.

Progressive Drifting of Floating Wind Turbines in a Wind Farm

2009 ◽  
Author(s):  
Hideyuki Suzuki ◽  
Masaru Kurimoto ◽  
Yu Kitahara ◽  
Yukinari Fukumoto
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Floating Platform ◽  
Allowable Limit ◽  
Main Research ◽  
Analysis And Design ◽  
Floating Wind Turbine ◽  
Wide Range

A wide range of platform types have been investigated for a floating wind turbine. Most of the research projects on a floating wind turbine assume that a land based wind turbine is to be installed on a platform with minimum modification to reduce the overall cost. For this reason, allowable limit of a motion of wind turbine is limited to lower value, for example, five degrees for static inclination and one to two degrees for pitching motion. So far analysis and design of motion characteristics of the platform have been main research concern. One key research area less focused is floating platform related risk. If the wind energy would be one of the major sources of power supply, wind farms which are comprised of large number of floating wind turbines must be deployed in the ocean. Wind turbines will be closely spaced in a wind farm so that installation cost should be minimized. In such an arrangement, a wind turbine accidentally started drifting has some possibility to collide or contact with the moorings of neighboring wind turbines and might cause progressive drifting of wind turbines. This paper present investigation of scenario of progressive drifting of floating wind turbines and evaluate risk of the scenario. Quantitative risk of several arrangements of wind farms is estimated. Effect of arrangement of wind turbines in a wind farm and safety factor used in design moorings is discussed.

scholarly journals Research on the Power Capture and Wake Characteristics of a Wind Turbine Based on a Modified Actuator Line Model

Energies ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 282
Author(s):  
Feifei Xue ◽  
Heping Duan ◽  
Chang Xu ◽  
Xingxing Han ◽  
Yanqing Shangguan ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Output Power ◽  
Wind Turbines ◽  
Wind Farm ◽  
Three Dimensional ◽  
Wind Farms ◽  
Line Model ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Actuator Line Model

On a wind farm, the wake has an important impact on the performance of the wind turbines. For example, the wake of an upstream wind turbine affects the blade load and output power of the downstream wind turbine. In this paper, a modified actuator line model with blade tips, root loss, and an airfoil three-dimensional delayed stall was revised. This full-scale modified actuator line model with blades, nacelles, and towers, was combined with a Large Eddy Simulation, and then applied and validated based on an analysis of wind turbine wakes in wind farms. The modified actuator line model was verified using an experimental wind turbine. Subsequently, numerical simulations were conducted on two NREL 5 MW wind turbines with different staggered spacing to study the effect of the staggered spacing on the characteristics of wind turbines. The results show that the output power of the upstream turbine stabilized at 5.9 MW, and the output power of the downstream turbine increased. When the staggered spacing is R and 1.5R, both the power and thrust of the downstream turbine are severely reduced. However, the length of the peaks was significantly longer, which resulted in a long-term unstable power output. As the staggered spacing increased, the velocity in the central near wake of the downstream turbine also increased, and the recovery speed at the threshold of the wake slowed down. The modified actuator line model described herein can be used for the numerical simulation of wakes in wind farms.

scholarly journals ‘Knowledge is power’ – making sense of wind farm data

2014 ◽  
pp. 123-127
Author(s):  
Frank O’Connor
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
New Hampshire ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Energy Sector ◽  
Electricity Demand ◽  
Making Sense

The Irish wind energy sector is booming. In 2012, Irish wind farms supplied enough energy to provide about 15% of Ireland’s electricity demand and power 1.12 million households. In March 2014, The Irish Wind Energy Association (IWEA), an organisation committed to the promotion of wind energy in Ireland, highlighted a planned €7 billion investment in the sector, with a confirmed project pipeline of over 180 new wind schemes. According to a recent TCD/ESRI report, this will bring the total number of jobs in the sector from 3,400 at present to over 8,400 and see a doubling of production of clean, indigenous, renewable energy. The modern wind turbines, which will be rolled out as part of these new schemes are a far cry from the turbines installed over four decades ago at the first commercial wind farm, constructed in 1980 on Crotched Mountain, New Hampshire, USA. A modern turbine such as ...

Flow Simulation Around a Rim-Driven Wind Turbine and in Its Wake

2013 ◽  
Author(s):  
Bryan E. Kaiser ◽  
Svetlana V. Poroseva ◽  
Michael A. Snider ◽  
Rob O. Hovsapian ◽  
Erick Johnson
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Flow Simulation ◽  
Wind Farms ◽  
Sensitivity Study ◽  
Onshore Wind ◽  
Flow Simulations ◽  
Turbine Design ◽  
The Impact

A relatively high free stream wind velocity is required for conventional horizontal axis wind turbines (HAWTs) to generate power. This requirement significantly limits the area of land for viable onshore wind farm locations. To expand a potential for wind power generation and an area suitable for onshore wind farms, new wind turbine designs capable of wind energy harvesting at low wind speeds are currently in development. The aerodynamic characteristics of such wind turbines are notably different from industrial standards. The optimal wind farm layout for such turbines is also unknown. Accurate and reliable simulations of a flow around and behind a new wind turbine design should be conducted prior constructing a wind farm to determine optimal spacing of turbines on the farm. However, computations are expensive even for a flow around a single turbine. The goal of the current study is to determine a set of simulation parameters that allows one to conduct accurate and reliable simulations at a reasonable cost of computations. For this purpose, a sensitivity study on how the parameters variation influences the results of simulations is conducted. Specifically, the impact of a grid refinement, grid stretching, grid cell shape, and a choice of a turbulent model on the results of simulation of a flow around a mid-sized Rim Driven Wind Turbine (U.S. Patent 7399162) and in its near wake is analyzed. This wind turbine design was developed by Keuka Energy LLC. Since industry relies on commercial software for conducting flow simulations, STAR-CCM+ software [1] was used in our study. A choice of a turbulence model was made based on the results from our previous sensitivity study of flow simulations over a rotating disk [2].

Simulation of Wake Interactions in Wind Farms Using an Immersed Wind Turbine Model

2013 ◽  
Vol 136 (6) ◽  
Author(s):  
S. Jafari ◽  
N. Chokani ◽  
R. S. Abhari
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Complex Terrain ◽  
Wind Farm ◽  
Wind Farms ◽  
Navier Stokes ◽  
The Novel ◽  
Wind Tunnel Experiments ◽  
Wake Interactions ◽  
Turbine Model

The accurate modeling of the wind turbine wakes in complex terrain is required to accurately predict wake losses. In order to facilitate the routine use of computational fluid dynamics in the optimized micrositing of wind turbines within wind farms, an immersed wind turbine model is developed. This model is formulated to require grid resolutions that are comparable to that in microscale wind simulations. The model in connection with the k-ω turbulence model is embedded in a Reynolds-averaged Navier–Stokes solver. The predictions of the model are compared to available wind tunnel experiments and to measurements at the full-scale Sexbierum wind farm. The good agreement between the predictions and measurements demonstrates that the novel immersed turbine model is suited for the optimized micrositing of wind turbines in complex terrain.

Assessment of the noise produced by wind farms with the acoustically analogous techniques without stopping the noise source

2018 ◽  
Vol 43 (2) ◽  
pp. 201-209
Author(s):  
Gino Iannace ◽  
Amelia Trematerra ◽  
Umberto Berardi
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Noise Source ◽  
Sound Field ◽  
Wind Farms ◽  
Sound Level ◽  
Acoustic Measurements ◽  
Relative Contribution

In Italy, wind turbines with a nominal power below 1 MW can be installed following simplified authorization procedures and are therefore becoming the preferred choice for promoters. The assessment of the noise of wind farms is not easy, due to economic reasons, with it being difficult to stop and assess the relative contribution of each wind turbine. Several acoustic measurements were taken inside homes located near a wind farm consisting of three wind turbines, each with a nominal power of 1 MW. The acoustic measurements were taken by placing sound level meters inside the houses at different wind speed values and wind directions. The acoustic measurements were taken using the acoustically analogous place technique. For economic reasons, the plant cannot be switched off. In this case, the sound field generated by the operation of the wind turbines was measured by placing two sound level meters in a house.

Sign in / Sign up

Export Citation Format

Share Document