scholarly journals Data-Driven Point Cloud Objects Completion

Sensors ◽  
2019 ◽  
Vol 19 (7) ◽  
pp. 1514 ◽  
Author(s):  
Yang Zhang ◽  
Zhen Liu ◽  
Xiang Li ◽  
Yu Zang
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
Data Driven ◽  
3D Perception ◽  
Single View ◽  
Decoder Architecture ◽  
Scanned Image ◽  
2D And 3D

With the development of the laser scanning technique, it is easier to obtain 3D large-scale scene rapidly. However, many scanned objects may suffer serious incompletion caused by the scanning angles or occlusion, which has severely impacted their future usage for the 3D perception and modeling, while traditional point cloud completion methods often fails to provide satisfactory results due to the large missing parts. In this paper, by utilising 2D single-view images to infer 3D structures, we propose a data-driven Point Cloud Completion Network ( P C C N e t ), which is an image-guided deep-learning-based object completion framework. With the input of incomplete point clouds and the corresponding scanned image, the network can acquire enough completion rules through an encoder-decoder architecture. Based on an attention-based 2D-3D fusion module, the network is able to integrate 2D and 3D features adaptively according to their information integrity. We also propose a projection loss as an additional supervisor to have a consistent spatial distribution from multi-view observations. To demonstrate the effectiveness, first, the proposed P C C N e t is compared to recent generative networks and has shown more powerful 3D reconstruction abilities. Then, P C C N e t is compared to a recent point cloud completion methods, which has demonstrate that the proposed P C C N e t is able to provide satisfied completion results for objects with large missing parts.

scholarly journals ANALYSIS OF 3D BUILDING MODELS ACCURACY BASED ON THE AIRBORNE LASER SCANNING POINT CLOUDS

2018 ◽  
Vol XLII-2 ◽  
pp. 797-804 ◽  
Author(s):  
W. Ostrowski ◽  
M. Pilarska ◽  
J. Charyton ◽  
K. Bakuła
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
3D Models ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Statistical Parameters ◽  
Airborne Laser ◽  
Building Models

Creating 3D building models in large scale is becoming more popular and finds many applications. Nowadays, a wide term “3D building models” can be applied to several types of products: well-known CityGML solid models (available on few Levels of Detail), which are mainly generated from Airborne Laser Scanning (ALS) data, as well as 3D mesh models that can be created from both nadir and oblique aerial images. City authorities and national mapping agencies are interested in obtaining the 3D building models. Apart from the completeness of the models, the accuracy aspect is also important. Final accuracy of a building model depends on various factors (accuracy of the source data, complexity of the roof shapes, etc.). In this paper the methodology of inspection of dataset containing 3D models is presented. The proposed approach check all building in dataset with comparison to ALS point clouds testing both: accuracy and level of details. Using analysis of statistical parameters for normal heights for reference point cloud and tested planes and segmentation of point cloud provides the tool that can indicate which building and which roof plane in do not fulfill requirement of model accuracy and detail correctness. Proposed method was tested on two datasets: solid and mesh model.

scholarly journals DEM Extraction from ALS Point Clouds in Forest Areas via Graph Convolution Network

2020 ◽  
Vol 12 (1) ◽  
pp. 178 ◽  
Author(s):  
Jinming Zhang ◽  
Xiangyun Hu ◽  
Hengming Dai ◽  
ShenRun Qu
Keyword(s):  
Deep Learning ◽  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Spatial Relationship ◽  
Point Clouds ◽  
Current Data ◽  
Data Sampling ◽  
Dynamic Graph ◽  
Convolution Model

It is difficult to extract a digital elevation model (DEM) from an airborne laser scanning (ALS) point cloud in a forest area because of the irregular and uneven distribution of ground and vegetation points. Machine learning, especially deep learning methods, has shown powerful feature extraction in accomplishing point cloud classification. However, most of the existing deep learning frameworks, such as PointNet, dynamic graph convolutional neural network (DGCNN), and SparseConvNet, cannot consider the particularity of ALS point clouds. For large-scene laser point clouds, the current data preprocessing methods are mostly based on random sampling, which is not suitable for DEM extraction tasks. In this study, we propose a novel data sampling algorithm for the data preparation of patch-based training and classification named T-Sampling. T-Sampling uses the set of the lowest points in a certain area as basic points with other points added to supplement it, which can guarantee the integrity of the terrain in the sampling area. In the learning part, we propose a new convolution model based on terrain named Tin-EdgeConv that fully considers the spatial relationship between ground and non-ground points when constructing a directed graph. We design a new network based on Tin-EdgeConv to extract local features and use PointNet architecture to extract global context information. Finally, we combine this information effectively with a designed attention fusion module. These aspects are important in achieving high classification accuracy. We evaluate the proposed method by using large-scale data from forest areas. Results show that our method is more accurate than existing algorithms.

scholarly journals Can 3D Point Clouds Replace GCPs?

2014 ◽  
Vol II-5 ◽  
pp. 347-354 ◽  
Author(s):  
G. Stavropoulou ◽  
G. Tzovla ◽  
A. Georgopoulos
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
Field Work ◽  
Surface Model ◽  
Control Points ◽  
3D Point Clouds ◽  
Surface Models

Over the past decade, large-scale photogrammetric products have been extensively used for the geometric documentation of cultural heritage monuments, as they combine metric information with the qualities of an image document. Additionally, the rising technology of terrestrial laser scanning has enabled the easier and faster production of accurate digital surface models (DSM), which have in turn contributed to the documentation of heavily textured monuments. However, due to the required accuracy of control points, the photogrammetric methods are always applied in combination with surveying measurements and hence are dependent on them. Along this line of thought, this paper explores the possibility of limiting the surveying measurements and the field work necessary for the production of large-scale photogrammetric products and proposes an alternative method on the basis of which the necessary control points instead of being measured with surveying procedures are chosen from a dense and accurate point cloud. Using this point cloud also as a surface model, the only field work necessary is the scanning of the object and image acquisition, which need not be subject to strict planning. To evaluate the proposed method an algorithm and the complementary interface were produced that allow the parallel manipulation of 3D point clouds and images and through which single image procedures take place. The paper concludes by presenting the results of a case study in the ancient temple of Hephaestus in Athens and by providing a set of guidelines for implementing effectively the method.

scholarly journals Efficient Calculation Method for Tree Stem Traits from Large-Scale Point Clouds of Forest Stands

2021 ◽  
Vol 13 (13) ◽  
pp. 2476
Author(s):  
Hiroshi Masuda ◽  
Yuichiro Hiraoka ◽  
Kazuto Saito ◽  
Shinsuke Eto ◽  
Michinari Matsushita ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Random Access ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Forest Stands ◽  
Cross Sectional ◽  
Cloud Data ◽  
Wireframe Model

With the use of terrestrial laser scanning (TLS) in forest stands, surveys are now equipped to obtain dense point cloud data. However, the data range, i.e., the number of points, often reaches the billions or even higher, exceeding random access memory (RAM) limits on common computers. Moreover, the processing time often also extends beyond acceptable processing lengths. Thus, in this paper, we present a new method of efficiently extracting stem traits from huge point cloud data obtained by TLS, without subdividing or downsampling the point clouds. In this method, each point cloud is converted into a wireframe model by connecting neighboring points on the same continuous surface, and three-dimensional points on stems are resampled as cross-sectional points of the wireframe model in an out-of-core manner. Since the data size of the section points is much smaller than the original point clouds, stem traits can be calculated from the section points on a common computer. With the study method, 1381 tree stems were calculated from 3.6 billion points in ~20 min on a common computer. To evaluate the accuracy of this method, eight targeted trees were cut down and sliced at 1-m intervals; actual stem traits were then compared to those calculated from point clouds. The experimental results showed that the efficiency and accuracy of the proposed method are sufficient for practical use in various fields, including forest management and forest research.

scholarly journals Application of terrestrial laser scanning to the development and updating of the base map

2017 ◽  
Vol 66 (1) ◽  
pp. 59-71 ◽  
Author(s):  
Przemysław Klapa ◽  
Bartosz Mitka
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Best Practice ◽  
Terrestrial Laser Scanning ◽  
Spatial Location ◽  
Point Clouds ◽  
Quality Analysis ◽  
Design Engineers ◽  
Laws And Regulations

Abstract The base map provides basic information about land to individuals, companies, developers, design engineers, organizations, and government agencies. Its contents include spatial location data for control network points, buildings, land lots, infrastructure facilities, and topographic features. As the primary map of the country, it must be developed in accordance with specific laws and regulations and be continuously updated. The base map is a data source used for the development and updating of derivative maps and other large scale cartographic materials such as thematic or topographic maps. Thanks to the advancement of science and technology, the quality of land surveys carried out by means of terrestrial laser scanning (TLS) matches that of traditional surveying methods in many respects. This paper discusses the potential application of output data from laser scanners (point clouds) to the development and updating of cartographic materials, taking Poland’s base map as an example. A few research sites were chosen to present the method and the process of conducting a TLS land survey: a fragment of a residential area, a street, the surroundings of buildings, and an undeveloped area. The entire map that was drawn as a result of the survey was checked by comparing it to a map obtained from PODGiK (pol. Powiatowy Ośrodek Dokumentacji Geodezyjnej i Kartograficznej – Regional Centre for Geodetic and Cartographic Records) and by conducting a field inspection. An accuracy and quality analysis of the conducted fieldwork and deskwork yielded very good results, which provide solid grounds for predicating that cartographic materials based on a TLS point cloud are a reliable source of information about land. The contents of the map that had been created with the use of the obtained point cloud were very accurately located in space (x, y, z). The conducted accuracy analysis and the inspection of the performed works showed that high quality is characteristic of TLS surveys. The accuracy of determining the location of the various map contents has been estimated at 0.02-0.03 m. The map was developed in conformity with the applicable laws and regulations as well as with best practice requirements.

scholarly journals AUTOMATED COARSE REGISTRATION OF POINT CLOUDS IN 3D URBAN SCENES USING VOXEL BASED PLANE CONSTRAINT

2017 ◽  
Vol IV-2/W4 ◽  
pp. 185-191 ◽  
Author(s):  
Y. Xu ◽  
R. Boerner ◽  
W. Yao ◽  
L. Hoegner ◽  
U. Stilla
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
Coordinate Frame ◽  
Small Individual ◽  
Planar Surfaces ◽  
Coarse Registration ◽  
Transformation Parameters ◽  
Normal Vectors

For obtaining a full coverage of 3D scans in a large-scale urban area, the registration between point clouds acquired via terrestrial laser scanning (TLS) is normally mandatory. However, due to the complex urban environment, the automatic registration of different scans is still a challenging problem. In this work, we propose an automatic marker free method for fast and coarse registration between point clouds using the geometric constrains of planar patches under a voxel structure. Our proposed method consists of four major steps: the voxelization of the point cloud, the approximation of planar patches, the matching of corresponding patches, and the estimation of transformation parameters. In the voxelization step, the point cloud of each scan is organized with a 3D voxel structure, by which the entire point cloud is partitioned into small individual patches. In the following step, we represent points of each voxel with the approximated plane function, and select those patches resembling planar surfaces. Afterwards, for matching the corresponding patches, a RANSAC-based strategy is applied. Among all the planar patches of a scan, we randomly select a planar patches set of three planar surfaces, in order to build a coordinate frame via their normal vectors and their intersection points. The transformation parameters between scans are calculated from these two coordinate frames. The planar patches set with its transformation parameters owning the largest number of coplanar patches are identified as the optimal candidate set for estimating the correct transformation parameters. The experimental results using TLS datasets of different scenes reveal that our proposed method can be both effective and efficient for the coarse registration task. Especially, for the fast orientation between scans, our proposed method can achieve a registration error of less than around 2 degrees using the testing datasets, and much more efficient than the classical baseline methods.

scholarly journals Fused Transparent Visualization of Point Cloud Data and Background Photographic Image for Tangible Cultural Heritage Assets

2019 ◽  
Vol 8 (8) ◽  
pp. 343 ◽  
Author(s):  
Li ◽  
Hasegawa ◽  
Nii ◽  
Tanaka
Keyword(s):  
Cultural Heritage ◽  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Three Dimensional ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Photographic Image ◽  
Scale Point

Digital archiving of three-dimensional cultural heritage assets has increased the demand for visualization of large-scale point clouds of cultural heritage assets acquired by laser scanning. We proposed a fused transparent visualization method that visualizes a point cloud of a cultural heritage asset in an environment using a photographic image as the background. We also proposed lightness adjustment and color enhancement methods to deal with the reduced visibility caused by the fused visualization. We applied the proposed method to a laser-scanned point cloud of a high-valued cultural festival float with complex inner and outer structures. Experimental results demonstrate that the proposed method enables high-quality transparent visualization of the cultural asset in its surrounding environment.

scholarly journals THE COMPARISON OF 2D AND 3D DETECTORS FOR TLS DATA REGISTRATION – PRELIMINARY RESULTS

2019 ◽  
Vol XLII-2/W9 ◽  
pp. 467-472 ◽  
Author(s):  
J. S. Markiewicz ◽  
Ł. Markiewicz ◽  
P. Foryś
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Scale Invariant ◽  
Data Registration ◽  
Registration Process ◽  
3D Data ◽  
Panoramic Images ◽  
Scale Invariant Feature ◽  
2D And 3D

<p><strong>Abstract.</strong> This paper presents the analysis of possible methods of a terrestrial laser scanning (TLS) data registration using 2D/3D detectors and descriptors. The developed approach, where point clouds are processed in form of panoramic images, orthoimages and 3D data, was described. The accuracy of the registration process was preliminary verified. The two approaches were analysed and compared: the 2D SIFT (Scale-Invariant Feature Transform) detector and descriptor with the rasterized TLS data and the 3D SIFT detector with the 3D FPFH (Fast Point Feature Histograms) descriptor. The feature points were found and preliminary matched using the OpenCV and PCL (Point Cloud Library) libraries. In order to find the best point cloud representation for the registration process, both the percentage and distribution of the correctly detected and matched points were analysed. The materials consisted of the point clouds of two chambers from the Museum of King John III’s Palace in Wilanów. They were acquired using the Z+F 5006h and 5003 TLS scanners. The performed analysis showed that the lowest RMSE values were for the 2D detectors and orthoimages. However, in the case of the point number and distribution, better results were obtained for using the 3D detector.</p>

scholarly journals Linear-Based Incremental Co-Registration of MLS and Photogrammetric Point Clouds

2021 ◽  
Vol 13 (11) ◽  
pp. 2195
Author(s):  
Shiming Li ◽  
Xuming Ge ◽  
Shengfu Li ◽  
Bo Xu ◽  
Zhendong Wang
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Registration Method ◽  
Cloud Data ◽  
Linear Feature ◽  
Data Registration ◽  
Source Point ◽  
Urban Remote Sensing ◽  
Single Data

Today, mobile laser scanning and oblique photogrammetry are two standard urban remote sensing acquisition methods, and the cross-source point-cloud data obtained using these methods have significant differences and complementarity. Accurate co-registration can make up for the limitations of a single data source, but many existing registration methods face critical challenges. Therefore, in this paper, we propose a systematic incremental registration method that can successfully register MLS and photogrammetric point clouds in the presence of a large number of missing data, large variations in point density, and scale differences. The robustness of this method is due to its elimination of noise in the extracted linear features and its 2D incremental registration strategy. There are three main contributions of our work: (1) the development of an end-to-end automatic cross-source point-cloud registration method; (2) a way to effectively extract the linear feature and restore the scale; and (3) an incremental registration strategy that simplifies the complex registration process. The experimental results show that this method can successfully achieve cross-source data registration, while other methods have difficulty obtaining satisfactory registration results efficiently. Moreover, this method can be extended to more point-cloud sources.

scholarly journals Revealing Changes in the Stem Form and Volume Allocation in Diverse Boreal Forests Using Two-Date Terrestrial Laser Scanning

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 835
Author(s):  
Ville Luoma ◽  
Tuomas Yrttimaa ◽  
Ville Kankare ◽  
Ninni Saarinen ◽  
Jiri Pyörälä ◽  
...  
Keyword(s):  
Tree Growth ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Stem Volume ◽  
Accurate Information ◽  
Stem Form ◽  
Monitoring Period ◽  
Significant Difference

Tree growth is a multidimensional process that is affected by several factors. There is a continuous demand for improved information on tree growth and the ecological traits controlling it. This study aims at providing new approaches to improve ecological understanding of tree growth by the means of terrestrial laser scanning (TLS). Changes in tree stem form and stem volume allocation were investigated during a five-year monitoring period. In total, a selection of attributes from 736 trees from 37 sample plots representing different forest structures were extracted from taper curves derived from two-date TLS point clouds. The results of this study showed the capability of point cloud-based methods in detecting changes in the stem form and volume allocation. In addition, the results showed a significant difference between different forest structures in how relative stem volume and logwood volume increased during the monitoring period. Along with contributing to providing more accurate information for monitoring purposes in general, the findings of this study showed the ability and many possibilities of point cloud-based method to characterize changes in living organisms in particular, which further promote the feasibility of using point clouds as an observation method also in ecological studies.

Sign in / Sign up

Export Citation Format

Share Document