scholarly journals Measurement of an Analyte Concentration in Test Solution by Using Helmholtz Resonator for Biosensor Applications

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1127 ◽  
Author(s):  
Yugang Chen ◽  
Yong-Hwa Park
Keyword(s):  
Resonant Frequency ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Acoustic Resonance ◽  
Acoustic Power ◽  
Test Solution ◽  
Frequency Change ◽  
Analyte Concentration ◽  
Resonator System ◽  
Higher Sensitivity

In this paper, an indirect method of measuring an analyte concentration in a test solution using the resonant frequency change of a Helmholtz resonator is proposed, using a novel architecture of Helmholtz resonator filled with two kinds of fluids (fixed fluid and test solution). Since the analyte concentration yields changes of density and sound speed of the test solution, the resonant frequency of the proposed Helmholtz resonator is affected by the analyte concentration of the test solution. From this effect, the analyte concentration of the test solution can be measured by the spectrum of acoustic resonance of the Helmholtz resonator. The experiment was done using a 3D-printed Helmholtz resonator system with an acoustic power source and detectors, which is consistent with analytical results and showed that the analyte concentration can be measured with higher sensitivity compared to conventional cantilever-type sensors. As an example application, the possibility of measuring glucose concentration of human blood was demonstrated, showing higher sensitivity and relatively low frequency range compared to previous resonance based methods.

scholarly journals A MODEL OF THE MECHANISM OF SOUND PRODUCTION IN CICADAS

1992 ◽  
Vol 173 (1) ◽  
pp. 123-153 ◽  
Author(s):  
H. C. Bennet-Clark ◽  
D. Young
Keyword(s):  
Resonant Frequency ◽  
Sound Production ◽  
Abdominal Cavity ◽  
Electrical Power ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Sound Pulse ◽  
Song Frequency ◽  
Resonator System ◽  
Sound Pulses

1. Dried cicada bodies of the species Cyclochila australasiae and model cicadas made from a miniature earphone driving a plastic cavity were used to study the acoustics of sound production in male cicadas. 2. A model cicada with shape and dimensions similar to those of the abdomen of a male C. australasiae resonates at the natural song frequency of the species (4.3 kHz). The abdominal air sac of C. australasiae also resonates at frequencies close to the natural song frequency when excited by external sounds. In an atmosphere of chlorofluorocarbon (CFC) gas, the resonant frequency is lowered in keeping with the decrease in velocity of sound in the CFC gas. 3. At the model's resonant frequency, the driving earphone dissipates more electrical power with the cavity attached than without the cavity. The cavity of the model cicada acts as a narrow-band acoustic acceptance filter, tuned to the natural song frequency. 4. When the miniature earphone emits brief clicks, mimicking those produced by the natural tymbal mechanism, the model cicada produces sound pulses that vary in duration and shape according to the number and timing of the clicks. A coherent train of two or three resonant clicks results in a long slowly-decaying sound pulse similar to that in the natural song. 5. The natural song frequency can be predicted from the dimensions of the abdominal cavity and the tympana in C. australasiae using a simple equation for the resonant frequency of a Helmholtz resonator. This equation also predicts the song frequency of Macrotristria angularis and Magicicada cassini, but it fails with the low-frequency song of Magicicada septendecim. This discrepancy can be accounted for by the unusually thick tympana of M. septendecim, which tend to lower the resonant frequency of the system. 6. We conclude that the abdomen of male cicadas forms a Helmholtz resonator, the components of which are the large air sac as the cavity and the tympana as the neck of the resonator. We suggest that cicada sound production depends on the coupling of two resonators, that of the tymbal and that of the abdominal air sac, from which sound is radiated through the tympana. The coupled resonator system would produce the long sound pulses required for stimulating a sensitive sharply tuned auditory organ.

scholarly journals Acoustic notch filtering earmuff utilizing Helmholtz resonator arrays

PLoS ONE ◽  
2021 ◽  
Vol 16 (10) ◽  
pp. e0258842
Author(s):  
Fumiya Mizukoshi ◽  
Hidetoshi Takahashi
Keyword(s):  
Resonant Frequency ◽  
Noise Control ◽  
Active Noise Control ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Honeycomb Structure ◽  
Sound Insulation ◽  
Frequency Noise ◽  
Target Frequency ◽  
Notch Filtering

In recent years, noisy bustling environments have created situations in which earmuffs must soundproof only specific noise while transmitting significant sounds, such as voices, for work safety and efficiency. Two sound insulation technologies have been utilized: passive noise control (PNC) and active noise control (ANC). However, PNC is incapable of insulating selective frequencies of noise, and ANC is limited to low-frequency sounds. Thus, it has been difficult for traditional earmuffs to cancel out only high-frequency noise that people feel uncomfortable hearing. Here, we propose an acoustic notch filtering earmuff utilizing Helmholtz resonator (HR) arrays that provides a sound attenuation effect around the tuneable resonant frequency. A sheet-like sound insulating plate comprising HR arrays is realized in a honeycomb structure. Since the resonant frequency is determined by the geometry of the HR arrays, a highly audible sound region can be designed as the target frequency. In this research, the acoustic notch filtering performance of the proposed HR array plate is investigated in both simulations and experiments. Furthermore, the fabricated earmuffs using the novel HR array plates achieve a sound insulation performance exceeding 40 dB at the target frequency, which is sufficiently high compared to that of conventional earmuffs. The experimental results confirm that the proposed device is a useful approach for insulating frequency-selective sound.

scholarly journals Numerical investigation on low-frequency noise damping performances of Helmholtz resonators with an extended neck in presence of a grazing flow

2021 ◽  
pp. 146134842110205
Author(s):  
Weiwei Wu ◽  
Yiheng Guan
Keyword(s):  
Resonant Frequency ◽  
Stokes Equations ◽  
Transmission Loss ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Frequency Noise ◽  
Frequency Range ◽  
Helmholtz Resonators ◽  
Numerical Predictions ◽  
Grazing Flow

In this work, modified designs of Helmholtz resonators with extended deflected neck are proposed, numerically evaluated and optimized aiming to achieve a better transmission loss performance over a broader frequency range. For this, 10 Helmholtz resonators with different extended neck configurations (e.g. the angle between extended neck and the y-axis) in the presence of a grazing flow are assessed. Comparison is then made between the proposed resonators and the conventional one, i.e. in the absence of an extended neck (i.e. Design A). For this, a two-dimensional linearized Navier Stokes equations-based model of a duct with the modified Helmholtz resonator implemented was developed in frequency domain. The model was first validated by comparing its numerical predictions with the experimental results available in the literature and the theoretical results. The model was then applied to evaluate the noise damping performance of the Helmholtz resonator with (1) an extended neck on the upstream side (Design B); (2) on the downstream side (Design C), (3) both upstream and downstream sides (Design D), (4) the angle between the extended neck and the y-axis, i.e. (a) 0°, (b) 30°, and (c) 45°, (d) 48.321°. In addition, the effects of the grazing flow Mach number (Ma) were evaluated. It was found that the transmission loss peaks of the Helmholtz resonator with the extended neck was maximized at Ma = 0.03 than at the other Mach numbers. Conventional resonator, i.e. Design A was observed to be associated with a lower transmission loss performance at a lower resonant frequency than those as observed on Designs B–D. Moreover, the optimum design of the proposed resonators with the extended neck is shown to be able to shift the resonant frequency by approximately 90 Hz, and maximum transmission loss could be increased by 28–30 dB. In addition, the resonators with extended necks are found to be associated with two or three transmission loss peaks, indicating that these designs have a broader effective frequency range. Finally, the neck deflection angles of 30° and 45° are shown to be involved with better transmission loss peaks than that with a deflection angle of 0°. In summary, the present study sheds light on maximizing the resonator’s noise damping performances by applying and optimizing an extended neck.

Tuned Damping of an Air-Mounted Isolation System

2004 ◽  
Author(s):  
Reza Kashani ◽  
Kazim Mirza
Keyword(s):  
Resonant Frequency ◽  
High Frequency ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Isolation System ◽  
And Mathematics ◽  
High Level ◽  
Three Degree Of Freedom ◽  
Tuned Damper ◽  
Isolation Performance

Air mounts can provide the highest degree of isolation of any type vibration isolator. Soft-mounting, and thus high level of low-frequency isolation, with system natural frequency as low as 1 Hz can be achieved. Due to their construction, air mounts have negligible damping. Although, this almost undamped nature of air mounts enhances the high-frequency isolation, provisions should be made to address the lack of isolation resulting in excessive body displacements around the resonant frequencies, especially when the system is exposed to shock inputs. While the addition of viscous damping to the air mount is proposed in the literature but it is not recommended in most applications. This is because it deteriorates the mount’s high-frequency isolation performance. Instead, it would be highly desirable to add tuned damping to the mounted system at its resonant frequency (ies). The challenge in doing so, is realizing a damper tunable to a very low frequency and yet not be prohibitively large. A novel tuned damping mechanism is proposed in this paper. It adds damping to an air mount only at the resonant frequency (ies), via a bi-fluid Helmholtz resonator. In an illustrative example the mechanics and mathematics (modeling) of a one and three degree of freedom air mounted systems equipped with a tuned damper, as well as the tuning of such damper are discussed. The example also demonstrates the effectiveness of the air mount with the tuned damper.

scholarly journals A Helmholtz Resonator with Spiral Neck for Analyte Concentration Measurement in Low Frequency Range

2020 ◽  
Vol 10 (11) ◽  
pp. 3676 ◽  
Author(s):  
Yugang Chen ◽  
Bomi Lee ◽  
Yong-Hwa Park
Keyword(s):  
Pressure Sensors ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Frequency Measurement ◽  
Test Sample ◽  
Acoustic Power ◽  
Operating Frequency ◽  
Resonance Excitation ◽  
Element Analysis ◽  
Biosensor Application

Helmholtz resonators (HR) have been proven to have feasibility for sensor applications with good performance. However, for biosensor application, when the amount of test sample is limited, the operating frequency tends to be very high, which may bring challenges of resonance excitation and frequency measurement. In this paper, a modified HR was proposed for biosensor application at a lower frequency, by designing the neck of the HR as a type of an Archimedes spiral, which can increase the neck length as much as possible without occupying much space. The resonant frequency of the proposed HR was derived by treating it as an HR with a straight neck with the equivalent length. An analytical example was calculated and verified by acoustic finite element analysis, and the results clearly showed that the frequency decreases in comparison to that of the conventional HR. Based on the underlying theory, the measurement principle was proposed and the experiment setup was established using a 3D-printed structure. The experiment was done using test solutions with different glucose concentrations, whose results showed consistency with the analytical results and noticeable frequency increases with the glucose concentration. Prospective results of the proposed HR after miniaturization show an operating frequency around 3 kHz when the amount of test sample is 0.1 mL, which will facilitate use of the common acoustic power source and acoustic pressure sensors in the sensing system.

scholarly journals Acoustic notch filtering earmuff utilizing Helmholtz resonator arrays

2021 ◽  
Author(s):  
Fumiya Mizukoshi ◽  
Hidetoshi Takahashi
Keyword(s):  
Resonant Frequency ◽  
Noise Control ◽  
Active Noise Control ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Honeycomb Structure ◽  
Sound Insulation ◽  
Frequency Noise ◽  
Target Frequency ◽  
Notch Filtering

Abstract In recent years, noisy bustling environments have created situations in which earmuffs must soundproof only specific noise while transmitting significant sounds, such as voices, for work safety and efficiency. Two sound insulation technologies have been utilized: passive noise control (PNC) and active noise control (ANC). However, PNC is incapable of insulating selective frequencies of noise, and ANC is limited to low-frequency sounds. Thus, it has been difficult for traditional earmuffs to cancel out only high-frequency noise that people feel uncomfortable hearing. Here, we propose an acoustic notch filtering earmuff utilizing Helmholtz resonator (HR) arrays that provides a sound attenuation effect around the tuneable resonant frequency. A sheet-like sound insulating plate comprising HR arrays is realized in a honeycomb structure. Since the resonant frequency is determined by the geometry of the HR arrays, a highly audible sound region can be designed as the target frequency. In this research, the acoustic notch filtering performance of the proposed HR array plate was investigated in both simulations and experiments. Furthermore, the fabricated earmuffs using the novel HR array plates achieved a sound insulation performance exceeding 40 dB at the target frequency, which is sufficiently high compared to conventional earmuffs. The experimental results confirm that the proposed device is a useful approach for insulating frequency-selective sound.

scholarly journals Magnetoelastic Coupling and Delta-E Effect in Magnetoelectric Torsion Mode Resonators

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2022
Author(s):  
Benjamin Spetzler ◽  
Elizaveta V. Golubeva ◽  
Ron-Marco Friedrich ◽  
Sebastian Zabel ◽  
Christine Kirchhof ◽  
...  
Keyword(s):  
Low Frequency ◽  
High Sensitivity ◽  
Element Model ◽  
Mode Number ◽  
Frequency Change ◽  
General Description ◽  
Resonance Modes ◽  
Field Sensor ◽  
Magnetic Sensitivity ◽  
Bending Modes

Magnetoelectric resonators have been studied for the detection of small amplitude and low frequency magnetic fields via the delta-E effect, mainly in fundamental bending or bulk resonance modes. Here, we present an experimental and theoretical investigation of magnetoelectric thin-film cantilevers that can be operated in bending modes (BMs) and torsion modes (TMs) as a magnetic field sensor. A magnetoelastic macrospin model is combined with an electromechanical finite element model and a general description of the delta-E effect of all stiffness tensor components Cij is derived. Simulations confirm quantitatively that the delta-E effect of the C66 component has the promising potential of significantly increasing the magnetic sensitivity and the maximum normalized frequency change ∆fr. However, the electrical excitation of TMs remains challenging and is found to significantly diminish the gain in sensitivity. Experiments reveal the dependency of the sensitivity and ∆fr of TMs on the mode number, which differs fundamentally from BMs and is well explained by our model. Because the contribution of C11 to the TMs increases with the mode number, the first-order TM yields the highest magnetic sensitivity. Overall, general insights are gained for the design of high-sensitivity delta-E effect sensors, as well as for frequency tunable devices based on the delta-E effect.

Optimally Sensitive and Efficient Compact Loudspeakers for Low Audio Frequencies

2007 ◽  
Vol 38 (7) ◽  
pp. 11-17
Author(s):  
Ronald M. Aarts
Keyword(s):  
Optimality Criterion ◽  
Low Frequency ◽  
Audio Signal ◽  
Design Procedure ◽  
Frequency Range ◽  
Force Factor ◽  
Low Frequencies ◽  
Limited Frequency ◽  
The Cost ◽  
Higher Sensitivity

Conventionally, the ultimate goal in loudspeaker design has been to obtain a flat frequency response over a specified frequency range. This can be achieved by carefully selecting the main loudspeaker parameters such as the enclosure volume, the cone diameter, the moving mass and the very crucial “force factor”. For loudspeakers in small cabinets the results of this design procedure appear to be quite inefficient, especially at low frequencies. This paper describes a new solution to this problem. It consists of the combination of a highly non-linear preprocessing of the audio signal and the use of a so called low-force-factor loudspeaker. This combination yields a strongly increased efficiency, at least over a limited frequency range, at the cost of a somewhat altered sound quality. An analytically tractable optimality criterion has been defined and has been verified by the design of an experimental loudspeaker. This has a much higher efficiency and a higher sensitivity than current low-frequency loudspeakers, while its cabinet can be much smaller.

Nonlinear behavior of Helmholtz resonator with a compliant wall for low frequency, broadband noise control

2021 ◽  
pp. 1-29
Author(s):  
Maya Pishvar ◽  
Ryan L Harne
Keyword(s):  
Dynamic Response ◽  
Low Frequency ◽  
Nonlinear Behavior ◽  
Helmholtz Resonator ◽  
Broadband Noise ◽  
Sound Attenuation ◽  
Wall Material ◽  
Modeling Framework ◽  
Compliant Wall ◽  
Broadband Sound

Abstract Low frequency sound attenuation is often pursued using Helmholtz resonators (HRs). The introduction of a compliant wall around the acoustic cavity results in a two-degree-of-freedom (2DOF) system capable of more broadband sound absorption. In this study, we report the amplitude-dependent dynamic response of a compliant walled HR and investigate the effectiveness of wall compliance to improve the absorption of sound in linear and nonlinear regimes. The acoustic-structure interactions between the conventional Helmholtz resonator and the compliant wall result in non-intuitive responses when acted on by nonlinear amplitudes of excitation pressure. This paper formulates and studies a reduced order model to characterize the nonlinear dynamic response of the 2DOF HR with a compliant wall compared to that of a conventional rigid HR. Validated by experimental evidence, the modeling framework facilitates an investigation of strategies to achieve broadband sound attenuation, including by selection of wall material, wall thickness, geometry of the HR, and other parameters readily tuned by system design. The results open up new avenues for the development of efficient acoustic resonators exploiting the deflection of a compliant wall for suppression of extreme noise amplitudes.

Sign in / Sign up

Export Citation Format

Share Document