scholarly journals A Sensor Array Realized by a Single Flexible TiO2/POMs Film to Contactless Detection of Triacetone Triperoxide

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 915 ◽  
Author(s):  
Xiaorong Lü ◽  
Puqi Hao ◽  
Guanshun Xie ◽  
Junyuan Duan ◽  
Bingxin Liu
Keyword(s):  
Sensor Array ◽  
Sensor Arrays ◽  
Ambient Air ◽  
Detection Sensitivity ◽  
Excitation Wavelength ◽  
Triacetone Triperoxide ◽  
Sensor Film ◽  
Vapor Sensor ◽  
The Stability

The homemade explosive, triacetone triperoxide (TATP), is easy to synthesize, sensitive to detonation but hard to detect directly. Vapor sensor arrays composed of a few sensor materials have the potential to discriminate TATP, but the stability of the sensor array is always a tricky problem since each sensor may encounter a device fault. Thus, a sensor array based on a single optoelectronic TiO2/PW11 sensor was first constructed by regulating the excitation wavelength to discriminate TATP from other explosives. By in situ doping of Na3PW12O40, a Keggin structure of PW11 formed on the TiO2 to promote the photoinduced electron-hole separation, thus obviously improving the detection sensitivity of the sensor film and shortening the response time. The response of the TiO2/PW11 sensor film to TATP under 365, 450 and 550 nm illumination is 81%, 42%, and 37%, respectively. The TiO2/PW11 sensor features selectivity to TATP and is able to detect less than 50 ppb. The flexibility and stability of the flexible sensor film is also demonstrated with the extent of bending. Furthermore, the sensing response cannot be affected by ambient air below 60% relative humidity.

In situ measurement for tropospheric OH radical by Laser Induced Fluorescence technique during STORM campaign

2020 ◽  
Author(s):  
Fengyang Wang ◽  
Renzhi Hu ◽  
Pinhua Xie ◽  
Yihui Wang ◽  
Shengrong Lou ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Photon Counting ◽  
Ambient Air ◽  
Laser Induced Fluorescence ◽  
Detection Sensitivity ◽  
Oh Radical ◽  
Fluorescence Technique ◽  
Radical Concentration ◽  
Mobile Observation

<p>Hydroxyl (OH) play an essential role in atmospheric chemistry. OH radical is an indicator of atmospheric oxidation and self-purification, which determines the removal of most trace gases in the atmosphere, such as CO, SO<sub>2</sub>, NO<sub>2</sub>, CH<sub>4</sub> and other volatile organic compounds (VOCs). A ground-based system for measurement of tropospheric OH radical by Laser Induced Fluorescence technique (AIOFM-LIF) was developed and integrated into a mobile observation platform for field observation. Ambient air expands through a 0.4 mm nozzle to low pressure. OH radical is irradiated by the 308 nm laser pulse at a repetition rate of 8.5 kHz, accompanying the release fluorescence of the A<sup>2</sup>Σ<sup>+</sup>(v’=0)—X<sup>2</sup>Π<sub>i</sub>(v’’=0) transition at 308 nm with the resultant fluorescence being detected by gated photon counting. The detection sensitivity of AIOFM-LIF system was calibrated by a portable standard OH radical source based on water photolysis-ozone actinometry. Following laboratory and field calibrations to characterise the instrument sensitivity, OH radical detection limits were (1.84±0.26) × 10<sup>5</sup> cm<sup>-3</sup> and (3.69±0.52) × 10<sup>5</sup> cm<sup>-3</sup> at night and noon, respectively. During “A comprehensive STudy of the Ozone foRmation Mechanism in Shenzhen” (STORM) campaign, AIOFM-LIF system was deployed in Shenzhen, China, and OH radical concentration was obtained validly except for the rainy days. Mean diurnal variation of HOx radical concentration was obtained, and the peak was 6.6×10<sup>6</sup> cm<sup>-3</sup> which appeared around 12:00 at noon. A general good agreement of OH radical concentration with j(O<sup>1</sup>D) was observed with a high correlation (R<sup>2</sup> =0.77), which illustrates that photolysis of ozone is an important source of OH radical during this campaign. A box model was applied to simulate the concentrations of OH at this field site, the primary production of OH radical was generally dominated by photolysis of O<sub>3</sub>, HONO, HCHO, while the other production was contributed by calculated species (OVOCs).</p>

Influence of ion-milling on the T2 phase in Al-2.5%Li-2.5%Cu alloy

1989 ◽  
Vol 47 ◽  
pp. 288-289
Author(s):  
J. R. Reed ◽  
D. J. Michel ◽  
P. R. Howell
Keyword(s):  
Thin Foil ◽  
Icosahedral Symmetry ◽  
Ion Milling ◽  
Cu Alloy ◽  
Thin Foils ◽  
Heat Treated ◽  
Aluminum Solid Solution ◽  
In Situ Heating ◽  
The Stability

The Al6Li3Cu (T2) phase, which exhibits five-fold or icosahedral symmetry, forms through solid state precipitation in dilute Al-Li-Cu alloys. Recent studies have reported that the T2 phase transforms either during TEM examination of thin foils or following ion-milling of thin foil specimens. Related studies have shown that T2 phase transforms to a microcrystalline array of the TB phase and a dilute aluminum solid solution during in-situ heating in the TEM. The purpose of this paper is to report results from an investigation of the influence of ion-milling on the stability of the T2 phase in dilute Al-Li-Cu alloy.The 3-mm diameter TEM disc specimens were prepared from a specially melted Al-2.5%Li-2.5%Cu alloy produced by conventional procedures. The TEM specimens were solution heat treated 1 h at 550°C and aged 1000 h at 190°C in air to develop the microstructure. The disc specimens were electropolished to achieve electron transparency using a 20:80 (vol. percent) nitric acid: methanol solution at -60°C.

scholarly journals The influence of chemical parameters on the in-situ metal carbonyl complex formation studied with the fast on-line reaction apparatus (FORA)

2021 ◽  
Vol 109 (4) ◽  
pp. 243-260 ◽  
Author(s):  
Yves Wittwer ◽  
Robert Eichler ◽  
Dominik Herrmann ◽  
Andreas Türler
Keyword(s):  
Metal Carbonyl ◽  
Ambient Air ◽  
Single Atom ◽  
Carbonyl Complex ◽  
Carbonyl Complexes ◽  
On Line ◽  
Carrier Gases ◽  
And Performance ◽  
Atom Chemistry

Abstract A new setup named Fast On-line Reaction Apparatus (FORA) is presented which allows for the efficient investigation and optimization of metal carbonyl complex (MCC) formation reactions under various reaction conditions. The setup contains a 252Cf-source producing short-lived Mo, Tc, Ru and Rh isotopes at a rate of a few atoms per second by its 3% spontaneous fission decay branch. Those atoms are transformed within FORA in-situ into volatile metal carbonyl complexes (MCCs) by using CO-containing carrier gases. Here, the design, operation and performance of FORA is discussed, revealing it as a suitable setup for performing single-atom chemistry studies. The influence of various gas-additives, such as CO2, CH4, H2, Ar, O2, H2O and ambient air, on the formation and transport of MCCs was investigated. O2, H2O and air were found to harm the formation and transport of MCCs in FORA, with H2O being the most severe. An exception is Tc, for which about 130 ppmv of H2O caused an increased production and transport of volatile compounds. The other gas-additives were not influencing the formation and transport efficiency of MCCs. Using an older setup called Miss Piggy based on a similar working principle as FORA, it was additionally investigated if gas-additives are mostly affecting the formation or only the transport stability of MCCs. It was found that mostly formation is impacted, as MCCs appear to be much less sensitive to reacting with gas-additives in comparison to the bare Mo, Tc, Ru and Rh atoms.

scholarly journals Underground Microseismic Event Monitoring and Localization within Sensor Networks

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2830
Author(s):  
Sili Wang ◽  
Mark P. Panning ◽  
Steven D. Vance ◽  
Wenzhan Song
Keyword(s):  
Sensor Networks ◽  
Real Time ◽  
Information Needs ◽  
Localization Algorithm ◽  
Distributed Sensors ◽  
Distributed Sensor ◽  
Microseismic Events ◽  
The Stability ◽  
Stability And Accuracy

Locating underground microseismic events is important for monitoring subsurface activity and understanding the planetary subsurface evolution. Due to bandwidth limitations, especially in applications involving planetarily-distributed sensor networks, networks should be designed to perform the localization algorithm in-situ, so that only the source location information needs to be sent out, not the raw data. In this paper, we propose a decentralized Gaussian beam time-reverse imaging (GB-TRI) algorithm that can be incorporated to the distributed sensors to detect and locate underground microseismic events with reduced usage of computational resources and communication bandwidth of the network. After the in-situ distributed computation, the final real-time location result is generated and delivered. We used a real-time simulation platform to test the performance of the system. We also evaluated the stability and accuracy of our proposed GB-TRI localization algorithm using extensive experiments and tests.

scholarly journals Air Concentrations of Gaseous Elemental Mercury and Vegetation–Air Fluxes within Saltmarshes of the Tagus Estuary, Portugal

Atmosphere ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 228
Author(s):  
Rute Cesário ◽  
Nelson J. O’Driscoll ◽  
Sara Justino ◽  
Claire E. Wilson ◽  
Carlos E. Monteiro ◽  
...  
Keyword(s):  
Leaf Area ◽  
Elemental Mercury ◽  
Ambient Air ◽  
Tagus Estuary ◽  
Contaminated Site ◽  
Gaseous Elemental Mercury ◽  
Mercury Flux ◽  
Sarcocornia Fruticosa ◽  
Air Concentrations

In situ air concentrations of gaseous elemental mercury (Hg(0)) and vegetation–atmosphere fluxes were quantified in both high (Cala Norte, CN) and low-to-moderate (Alcochete, ALC) Hg-contaminated saltmarsh areas of the Tagus estuary colonized by plant species Halimione portulacoides (Hp) and Sarcocornia fruticosa (Sf). Atmospheric Hg(0) ranged between 1.08–18.15 ng m−3 in CN and 1.18–3.53 ng m−3 in ALC. In CN, most of the high Hg(0) levels occurred during nighttime, while the opposite was observed at ALC, suggesting that photoreduction was not driving the air Hg(0) concentrations at the contaminated site. Vegetation–air Hg(0) fluxes were low in ALC and ranged from −0.76 to 1.52 ng m−2 (leaf area) h−1 for Hp and from −0.40 to 1.28 ng m−2 (leaf area) h−1 for Sf. In CN, higher Hg fluxes were observed for both plants, ranging from −9.90 to 15.45 ng m−2 (leaf area) h−1 for Hp and from −8.93 to 12.58 ng m−2 (leaf area) h−1 for Sf. Mercury flux results at CN were considered less reliable due to large and fast variations in the ambient air concentrations of Hg(0), which may have been influenced by emissions from the nearby chlor-alkali plant, or historical contamination. Improved experimental setup, the influence of high local Hg concentrations and the seasonal activity of the plants must be considered when assessing vegetation–air Hg(0) fluxes in Hg-contaminated areas.

scholarly journals Safe and Effective Use of Ozone as Air and Surface Disinfectant in the Conjuncture of Covid-19

Gases ◽  
2020 ◽  
Vol 1 (1) ◽  
pp. 19-32
Author(s):  
Elena Grignani ◽  
Antonella Mansi ◽  
Renato Cabella ◽  
Paola Castellano ◽  
Angelo Tirabasso ◽  
...  
Keyword(s):  
Organic Molecules ◽  
Scientific Literature ◽  
Toxic Substance ◽  
Health And Safety ◽  
Emergency Situation ◽  
Ambient Air ◽  
Public Places ◽  
Safety Measures ◽  
Effective Use

The present paper extrapolates quantitative data for ozone virucidal activity on the basis of the available scientific literature data for a safe and effective use of ozone in the appropriate cases and to explore the safety measures developed under the stimulus of the current emergency situation. Ozone is a powerful oxidant reacting with organic molecules, and therefore has bactericidal, virucidal, and fungicidal actions. At the same time, it is a toxic substance, having adverse effects on health and safety. Its use is being proposed for the disinfection of workplaces’ and public places’ atmosphere, and for disposable masks and personal protective equipment disinfection for reuse, with particular reference to the COVID-19 pandemic outbreak. Ozone can be generated in situ by means of small, compact ozone generators, using dried ambient air as a precursor. It should be injected into the room that is to be disinfected until the desired ozone concentration is reached; after the time needed for the disinfection, its concentrations must be reduced to the levels required for the workers’ safety. The optimal use of ozone is for air and surface disinfection without human presence, using a concentration that is effective for the destruction of viruses, but not high enough to deteriorate materials.

scholarly journals A Superhydrophobic, Antibacterial, and Durable Surface of Poplar Wood

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1885
Author(s):  
Xinyu Wu ◽  
Feng Yang ◽  
Jian Gan ◽  
Zhangqian Kong ◽  
Yan Wu
Keyword(s):  
Stearic Acid ◽  
Antibacterial Properties ◽  
Alkali Resistance ◽  
Poplar Wood ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Acid And Alkali Resistance ◽  
The Stability

The silver particles were grown in situ on the surface of wood by the silver mirror method and modified with stearic acid to acquire a surface with superhydrophobic and antibacterial properties. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray energy spectroscopy (XPS) were used to analyze the reaction mechanism of the modification process. Scanning electron microscopy (SEM) and contact angle tests were used to characterize the wettability and surface morphology. A coating with a micro rough structure was successfully constructed by the modification of stearic acid, which imparted superhydrophobicity and antibacterial activity to poplar wood. The stability tests were performed to discuss the stability of its hydrophobic performance. The results showed that it has good mechanical properties, acid and alkali resistance, and UV stability. The durability tests demonstrated that the coating has the function of water resistance and fouling resistance and can maintain the stability of its hydrophobic properties under different temperatures of heat treatment.

scholarly journals α-Fetoprotein mRNA in situ hybridisation is a highly specific marker of hepatocellular carcinoma: a multi-centre study

2021 ◽  
Author(s):  
Shi-Xun Lu ◽  
Yu-Hua Huang ◽  
Li-Li Liu ◽  
Chris Zhiyi Zhang ◽  
Xia Yang ◽  
...  
Keyword(s):  
Hepatocellular Carcinoma ◽  
In Situ Hybridisation ◽  
Diagnostic Value ◽  
Detection Sensitivity ◽  
Specific Marker ◽  
Specific Method ◽  
Multi Centre Study ◽  
Arginase 1 ◽  
Afp Mrna

Abstract Background Pathologic diagnosis of hepatocellular carcinoma (HCC) can be challenging in differentiating from benign and non-hepatocytic malignancy lesions. The aim of this study was to investigate the potential utility of α-fetoprotein (AFP) mRNA RNAscope, a sensitive and specific method, in the diagnosis of HCC. Methods Three independent retrospective cohorts containing 2216 patients with HCC, benign liver lesions, and non-hepatocytic tumours were examined. AFP was detected using ELISA, IHC (Immunohistochemistry), and RNAscope. Glypican3 (GPC3), hepatocyte paraffin-1 (HepPar-1), and arginase-1 (Arg-1) proteins were detected using IHC. Results AFP RNAscope improved the HCC detection sensitivity by 24.7–32.7% compared with IHC. In two surgical cohorts, a panel of AFP RNAscope and GPC3 provided the best diagnostic value in differentiating HCC from benign hepatocytic lesions (AUC = 0.905 and 0.811), and a panel including AFP RNAscope, GPC3, HepPar-1, and Arg-1 yielded the best AUC (0.971 and 0.977) when distinguishing HCC from non-hepatocytic malignancies. The results from the liver biopsy cohort were similar, and additional application of AFP RNAscope improved the sensitivity by 18% when distinguishing HCC from benign hepatocytic lesions. Conclusions AFP mRNA detected by RNAscope is highly specific for hepatocytic malignancy and may serve as a novel diagnostic biomarker for HCC.

Sign in / Sign up

Export Citation Format

Share Document