scholarly journals A Combined Quantitative Evaluation Model for the Capability of Hyperspectral Imagery for Mineral Mapping

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 328 ◽  
Author(s):  
Na Li ◽  
Xinchen Huang ◽  
Huijie Zhao ◽  
Xianfei Qiu ◽  
Kewang Deng ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Statistical Analysis ◽  
Imaging System ◽  
Evaluation Model ◽  
Spectral Response ◽  
Influence Factors ◽  
Hyperspectral Data ◽  
Statistical Characteristics ◽  
Mineral Mapping ◽  
Proposed Model

To analyze the influence factors of hyperspectral remote sensing data processing, and quantitatively evaluate the application capability of hyperspectral data, a combined evaluation model based on the physical process of imaging and statistical analysis was proposed. The normalized average distance between different classes of ground cover is selected as the evaluation index. The proposed model considers the influence factors of the full radiation transmission process and processing algorithms. First- and second-order statistical characteristics (mean and covariance) were applied to calculate the changes for the imaging process based on the radiation energy transfer. The statistical analysis was combined with the remote sensing process and the application performance, which consists of the imaging system parameters and imaging conditions, by building the imaging system and processing models. The season (solar zenith angle), sensor parameters (ground sampling distance, modulation transfer function, spectral resolution, spectral response function, and signal to noise ratio), and number of features were considered in order to analyze the influence factors of the application capability level. Simulated and real data collected by Hymap in the Dongtianshan area (Xinjiang Province, China), were used to estimate the proposed model’s performance in the application of mineral mapping. The predicted application capability of the proposed model is consistent with the theoretical analysis.

scholarly journals POTENTIAL OF AIRBORNE IMAGING SPECTROSCOPY AT CZECHGLOBE

2016 ◽  
Vol XLI-B1 ◽  
pp. 15-17 ◽  
Author(s):  
J. Hanuš ◽  
T. Fabiánek ◽  
L. Fajmon
Keyword(s):  
Remote Sensing ◽  
Hyperspectral Imaging ◽  
Laser Scanning ◽  
Imaging System ◽  
Spectral Response ◽  
Imaging Spectroscopy ◽  
Laser Scanner ◽  
Current Status ◽  
Functional Changes ◽  
Processing Chain

Ecosystems, their services, structures and functions are affected by complex environmental processes, which are both natural and human-induced and globally changing. In order to understand how ecosystems behave in globally changing environment, it is important to monitor the current status of ecosystems and their structural and functional changes in time and space. An essential tool allowing monitoring of ecosystems is remote sensing (RS). Many ecosystems variables are being translated into a spectral response recorded by RS instruments. It is however important to understand the complexity and synergies of the key ecosystem variables influencing the reflected signal. This can be achieved by analysing high resolution RS data from multiple sources acquired simultaneously from the same platform. Such a system has been recently built at CzechGlobe - Global Change Research Institute (The Czech Academy of Sciences). <br><br> CzechGlobe has been significantly extending its research infrastructure in the last years, which allows advanced monitoring of ecosystem changes at hierarchical levels spanning from molecules to entire ecosystems. One of the CzechGlobe components is a laboratory of imaging spectroscopy. The laboratory is now operating a new platform for advanced remote sensing observations called FLIS (Flying Laboratory of Imaging Spectroscopy). FLIS consists of an airborne carrier equipped with passive RS systems. The core instrument of FLIS is a hyperspectral imaging system provided by Itres Ltd. The hyperspectral system consists of three spectroradiometers (CASI 1500, SASI 600 and TASI 600) that cover the reflective spectral range from 380 to 2450 nm, as well as the thermal range from 8 to 11.5 μm. The airborne platform is prepared for mounting of full-waveform laser scanner Riegl-Q780 as well, however a laser scanner is not a permanent part of FLIS. In 2014 the installation of the hyperspectral scanners was completed and the first flights were carried out with all sensors. <br><br> The new hyperspectral imaging system required adaptations in the data pre-processing chain. The established pre-processing chain (radiometric, atmospheric and geometric corrections), which was tailored mainly to the AISA Eagle instrument operated at CzechGlobe since 2004, has been now modified to fit the new system and users needs. Continuous development of the processing chain is now focused mainly on establishing pre-processing of thermal data including emissivity estimation and also on joint processing of hyperspectral and laser scanning data.

scholarly journals The Rocklea Dome 3D Mineral Mapping Test Data Set

2020 ◽  
Author(s):  
Carsten Laukamp ◽  
Maarten Haest ◽  
Thomas Cudahy
Keyword(s):  
Remote Sensing ◽  
Case Studies ◽  
Test Data ◽  
Mineral Exploration ◽  
Hyperspectral Data ◽  
Mineral Deposits ◽  
Drill Core ◽  
Data Set ◽  
Mineral Mapping ◽  
Barren Ground

Abstract. The integration of surface and subsurface geoscience data is critical for efficient and effective mineral exploration and mining. Publicly accessible datasets to evaluate the various geoscience analytical tools and their effectiveness for characterisation of mineral assemblages and lithologies or discrimination of ore from waste are however scarce. The open access Rocklea Dome 3D Mineral Mapping Test Data Set (Laukamp, 2020; https://doi.org/10.25919/5ed83bf55be6a) provides an opportunity for evaluating proximal and remote sensing data, validated and calibrated by independent geochemical and mineralogical analyses, for exploration of channel-iron deposits (CID) through cover. We present hyperspectral airborne, surface and drill core reflectance spectra collected in the visible-near infrared and shortwave infrared wavelength ranges (VNIR-SWIR; 350 to 2500 nm), as well as whole rock geochemistry obtained by means of X-Ray fluorescence analysis and loss on ignition measurements of drill core samples. The integration of surface with subsurface hyperspectral data collected in the frame of previously published Rocklea Dome 3D Mineral Mapping case studies demonstrated that about 30 % of exploration drill holes were sunk into barren ground and could have been of better use, located elsewhere, if airborne hyperspectral imagery had been consulted for drill hole planning. The remote mapping of transported Tertiary detritals (i.e. potential hosts of channel iron ore resources) versus weathered in situ Archaean geology (i.e. barren ground) has significant implications for other areas where cover (i.e. regolith and/or sediments covering bedrock hosting mineral deposits) hinders mineral exploration. Hyperspectral remote sensing represents a cost-effective method for regolith landform mapping required for planning drilling programs. In the Rocklea Dome area, vegetation unmixing methods applied to airborne hyperspectral data, integrated with subsurface data, resulted in seamless mapping of ore zones from the weathered surface to the base of the CID – a concept that can be applied to other mineral exploration and mineral deposit studies. Furthermore, the associated, independent calibration data allowed to quantify iron oxide phases and associated mineralogy from hyperspectral data. Using the Rocklea Dome data set, novel geostatistical clustering methods were applied to the drill core data sets for ore body domaining that introduced scientific rigour to a traditionally subjective procedure, resulting in reproducible objective domains that are critical for the mining process. Beyond the already published case studies, the Rocklea Dome 3D Mineral Mapping Test Data Set has the potential to develop new methods for advanced resource characterisation and develop new applications that aid exploration for mineral deposits through cover. The here newly presented white mica and chlorite abundance maps derived from airborne hyperspectral highlight the additional applications of remote sensing for geological mapping and could help to evaluate newly launched hyper- and multispectral spaceborne systems for geoscience and mineral exploration.

scholarly journals POTENTIAL OF AIRBORNE IMAGING SPECTROSCOPY AT CZECHGLOBE

2016 ◽  
Vol XLI-B1 ◽  
pp. 15-17 ◽  
Author(s):  
J. Hanuš ◽  
T. Fabiánek ◽  
L. Fajmon
Keyword(s):  
Remote Sensing ◽  
Hyperspectral Imaging ◽  
Laser Scanning ◽  
Imaging System ◽  
Spectral Response ◽  
Imaging Spectroscopy ◽  
Laser Scanner ◽  
Current Status ◽  
Functional Changes ◽  
Processing Chain

Ecosystems, their services, structures and functions are affected by complex environmental processes, which are both natural and human-induced and globally changing. In order to understand how ecosystems behave in globally changing environment, it is important to monitor the current status of ecosystems and their structural and functional changes in time and space. An essential tool allowing monitoring of ecosystems is remote sensing (RS). Many ecosystems variables are being translated into a spectral response recorded by RS instruments. It is however important to understand the complexity and synergies of the key ecosystem variables influencing the reflected signal. This can be achieved by analysing high resolution RS data from multiple sources acquired simultaneously from the same platform. Such a system has been recently built at CzechGlobe - Global Change Research Institute (The Czech Academy of Sciences). <br><br> CzechGlobe has been significantly extending its research infrastructure in the last years, which allows advanced monitoring of ecosystem changes at hierarchical levels spanning from molecules to entire ecosystems. One of the CzechGlobe components is a laboratory of imaging spectroscopy. The laboratory is now operating a new platform for advanced remote sensing observations called FLIS (Flying Laboratory of Imaging Spectroscopy). FLIS consists of an airborne carrier equipped with passive RS systems. The core instrument of FLIS is a hyperspectral imaging system provided by Itres Ltd. The hyperspectral system consists of three spectroradiometers (CASI 1500, SASI 600 and TASI 600) that cover the reflective spectral range from 380 to 2450 nm, as well as the thermal range from 8 to 11.5 μm. The airborne platform is prepared for mounting of full-waveform laser scanner Riegl-Q780 as well, however a laser scanner is not a permanent part of FLIS. In 2014 the installation of the hyperspectral scanners was completed and the first flights were carried out with all sensors. <br><br> The new hyperspectral imaging system required adaptations in the data pre-processing chain. The established pre-processing chain (radiometric, atmospheric and geometric corrections), which was tailored mainly to the AISA Eagle instrument operated at CzechGlobe since 2004, has been now modified to fit the new system and users needs. Continuous development of the processing chain is now focused mainly on establishing pre-processing of thermal data including emissivity estimation and also on joint processing of hyperspectral and laser scanning data.

scholarly journals THE STUDY OF SPECTRUM RECONSTRUCTION BASED ON FUZZY SET FULL CONSTRAINT AND MULTIENDMEMBER DECOMPOSITION

2017 ◽  
Vol XLII-2/W7 ◽  
pp. 551-555
Author(s):  
Y. Sun ◽  
Y. Lin ◽  
X. Hu ◽  
S. Zhao ◽  
S. Liu ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Fuzzy Set ◽  
Spatial Information ◽  
Imaging System ◽  
Remote Sensing Data ◽  
Wide Band ◽  
Hyperspectral Data ◽  
Spatial And Temporal Variation ◽  
Multispectral Data ◽  
Time Required

Hyperspectral imaging system can obtain spectral and spatial information simultaneously with bandwidth to the level of 10&amp;thinsp;nm or even less. Therefore, hyperspectral remote sensing has the ability to detect some kinds of objects which can not be detected in wide-band remote sensing, making it becoming one of the hottest spots in remote sensing. In this study, under conditions with a fuzzy set of full constraints, Normalized Multi-Endmember Decomposition Method (NMEDM) for vegetation, water, and soil was proposed to reconstruct hyperspectral data using a large number of high-quality multispectral data and auxiliary spectral library data. This study considered spatial and temporal variation and decreased the calculation time required to reconstruct the hyper-spectral data. The results of spectral reconstruction based on NMEDM showed that the reconstructed data has good qualities and certain applications, which makes it possible to carry out spectral features identification. This method also extends the application of depth and breadth of remote sensing data, helping to explore the law between multispectral and hyperspectral data.

scholarly journals The Rocklea Dome 3D Mineral Mapping Test Data Set

2021 ◽  
Vol 13 (3) ◽  
pp. 1371-1383
Author(s):  
Carsten Laukamp ◽  
Maarten Haest ◽  
Thomas Cudahy
Keyword(s):  
Remote Sensing ◽  
Case Studies ◽  
Test Data ◽  
Mineral Exploration ◽  
Hyperspectral Data ◽  
Mineral Deposits ◽  
Data Sets ◽  
Drill Core ◽  
Data Set ◽  
Mineral Mapping

Abstract. The integration of surface and subsurface geoscience data is critical for efficient and effective mineral exploration and mining. Publicly accessible data sets to evaluate the various geoscience analytical tools and their effectiveness for characterisation of mineral assemblages and lithologies or discrimination of ore from waste are however scarce. The open-access Rocklea Dome 3D Mineral Mapping Test Data Set (Laukamp, 2020; https://doi.org/10.25919/5ed83bf55be6a) provides an opportunity for evaluating proximal and remote sensing data, validated and calibrated by independent geochemical and mineralogical analyses, for exploration of channel iron deposits (CIDs) through cover. We present hyperspectral airborne, surface, and drill core reflectance spectra collected in the visible–near-infrared and shortwave infrared wavelength ranges (VNIR–SWIR; 350 to 2500 nm), as well as whole-rock geochemistry obtained by means of X-ray fluorescence analysis and loss-on-ignition measurements of drill core samples. The integration of surface with subsurface hyperspectral data collected in the frame of previously published Rocklea Dome 3D Mineral Mapping case studies demonstrated that about 30 % of exploration drill holes were sunk into barren ground and could have been of better use, located elsewhere, if airborne hyperspectral imagery had been consulted for drill hole planning. The remote mapping of transported Tertiary detritals (i.e. potential hosts of channel iron ore resources) versus weathered in situ Archaean bedrock (i.e. barren ground) has significant implications for other areas where “cover” (i.e. regolith and/or sediments covering bedrock hosting mineral deposits) hinders mineral exploration. Hyperspectral remote sensing represents a cost-effective method for regolith landform mapping required for planning drilling programmes. In the Rocklea Dome area, vegetation unmixing methods applied to airborne hyperspectral data, integrated with subsurface data, resulted in seamless mapping of ore zones from the weathered surface to the base of the CID – a concept that can be applied to other mineral exploration and mineral deposit studies. Furthermore, the associated, independent calibration data allowed the quantification of iron oxide phases and associated mineralogy from hyperspectral data. Using the Rocklea Dome data set, novel geostatistical clustering methods were applied to the drill core data sets for ore body domaining that introduced scientific rigour to a traditionally subjective procedure, resulting in reproducible objective domains that are critical for the mining process. Beyond the previously published case studies, the Rocklea Dome 3D Mineral Mapping Test Data Set has the potential to develop new methods for advanced resource characterisation and develop new applications that aid exploration for mineral deposits through cover. The white mica and chlorite abundance maps derived from airborne hyperspectral, presented here for the first time, highlight the additional applications of remote sensing for geological mapping and could help to evaluate newly launched hyper- and multispectral spaceborne systems for geoscience and mineral exploration.

scholarly journals A NOVEL DEEP CONVOLUTIONAL NEURAL NETWORK FOR SPECTRAL–SPATIAL CLASSIFICATION OF HYPERSPECTRAL DATA

2018 ◽  
Vol XLII-3 ◽  
pp. 897-900 ◽  
Author(s):  
N. Li ◽  
C. Wang ◽  
H. Zhao ◽  
X. Gong ◽  
D. Wang
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Convolutional Neural Network ◽  
Spatial Information ◽  
Hyperspectral Image ◽  
Three Dimensional ◽  
Hyperspectral Remote Sensing ◽  
Hyperspectral Data ◽  
Deep Convolutional Neural Network ◽  
Proposed Model

Spatial and spectral information are obtained simultaneously by hyperspectral remote sensing. Joint extraction of these information of hyperspectral image is one of most import methods for hyperspectral image classification. In this paper, a novel deep convolutional neural network (CNN) is proposed, which extracts spectral-spatial information of hyperspectral images correctly. The proposed model not only learns sufficient knowledge from the limited number of samples, but also has powerful generalization ability. The proposed framework based on three-dimensional convolution can extract spectral-spatial features of labeled samples effectively. Though CNN has shown its robustness to distortion, it cannot extract features of different scales through the traditional pooling layer that only have one size of pooling window. Hence, spatial pyramid pooling (SPP) is introduced into three-dimensional local convolutional filters for hyperspectral classification. Experimental results with a widely used hyperspectral remote sensing dataset show that the proposed model provides competitive performance.

Evaporite mineral mapping and determining their source rocks using remote sensing data in Sirjan playa, Kerman, Iran

2017 ◽  
Vol 33 (2) ◽  
pp. 255-274 ◽  
Author(s):  
Azam Soltaninejad ◽  
Hojjatollah Ranjbar ◽  
Mehdi Honarmand ◽  
Sara Dargahi
Keyword(s):  
Remote Sensing ◽  
Remote Sensing Data ◽  
Source Rocks ◽  
Mineral Mapping ◽  
Sensing Data

scholarly journals Hyperspectral Data Simulation (Sentinel-2 to AVIRIS-NG) for Improved Wildfire Fuel Mapping, Boreal Alaska

2021 ◽  
Vol 13 (9) ◽  
pp. 1693
Author(s):  
Anushree Badola ◽  
Santosh K. Panda ◽  
Dar A. Roberts ◽  
Christine F. Waigl ◽  
Uma S. Bhatt ◽  
...  
Keyword(s):  
Land Cover ◽  
Spectral Resolution ◽  
Hyperspectral Image ◽  
Spectral Response ◽  
Spectral Characteristics ◽  
Hyperspectral Data ◽  
Spectral Unmixing ◽  
High Spectral Resolution ◽  
Fuel Mapping ◽  
Sentinel 2

Alaska has witnessed a significant increase in wildfire events in recent decades that have been linked to drier and warmer summers. Forest fuel maps play a vital role in wildfire management and risk assessment. Freely available multispectral datasets are widely used for land use and land cover mapping, but they have limited utility for fuel mapping due to their coarse spectral resolution. Hyperspectral datasets have a high spectral resolution, ideal for detailed fuel mapping, but they are limited and expensive to acquire. This study simulates hyperspectral data from Sentinel-2 multispectral data using the spectral response function of the Airborne Visible/Infrared Imaging Spectrometer-Next Generation (AVIRIS-NG) sensor, and normalized ground spectra of gravel, birch, and spruce. We used the Uniform Pattern Decomposition Method (UPDM) for spectral unmixing, which is a sensor-independent method, where each pixel is expressed as the linear sum of standard reference spectra. The simulated hyperspectral data have spectral characteristics of AVIRIS-NG and the reflectance properties of Sentinel-2 data. We validated the simulated spectra by visually and statistically comparing it with real AVIRIS-NG data. We observed a high correlation between the spectra of tree classes collected from AVIRIS-NG and simulated hyperspectral data. Upon performing species level classification, we achieved a classification accuracy of 89% for the simulated hyperspectral data, which is better than the accuracy of Sentinel-2 data (77.8%). We generated a fuel map from the simulated hyperspectral image using the Random Forest classifier. Our study demonstrated that low-cost and high-quality hyperspectral data can be generated from Sentinel-2 data using UPDM for improved land cover and vegetation mapping in the boreal forest.

scholarly journals The use of remote sensing satellite using deep learning in emergency monitoring of high-level landslides disaster in Jinsha River

2021 ◽  
Author(s):  
Leijin Long ◽  
Feng He ◽  
Hongjiang Liu
Keyword(s):  
Remote Sensing ◽  
Southwest China ◽  
Influence Factors ◽  
Classification Error ◽  
Model Parameters ◽  
Detection Accuracy ◽  
Remote Sensing Images ◽  
Jinsha River ◽  
Detection Model ◽  
High Level

AbstractIn order to monitor the high-level landslides frequently occurring in Jinsha River area of Southwest China, and protect the lives and property safety of people in mountainous areas, the data of satellite remote sensing images are combined with various factors inducing landslides and transformed into landslide influence factors, which provides data basis for the establishment of landslide detection model. Then, based on the deep belief networks (DBN) and convolutional neural network (CNN) algorithm, two landslide detection models DBN and convolutional neural-deep belief network (CDN) are established to monitor the high-level landslide in Jinsha River. The influence of the model parameters on the landslide detection results is analyzed, and the accuracy of DBN and CDN models in dealing with actual landslide problems is compared. The results show that when the number of neurons in the DBN is 100, the overall error is the minimum, and when the number of learning layers is 3, the classification error is the minimum. The detection accuracy of DBN and CDN is 97.56% and 97.63%, respectively, which indicates that both DBN and CDN models are feasible in dealing with landslides from remote sensing images. This exploration provides a reference for the study of high-level landslide disasters in Jinsha River.

Sign in / Sign up

Export Citation Format

Share Document