scholarly journals Sensitivity Enhancement of a Surface Plasmon Resonance with Tin Selenide (SnSe) Allotropes

Sensors ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 173 ◽  
Author(s):  
Xiaoyu Dai ◽  
Yanzhao Liang ◽  
Yuting Zhao ◽  
Shuaiwen Gan ◽  
Yue Jia ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
2D Materials ◽  
Biochemical Sensors ◽  
2D Material ◽  
Tin Selenide ◽  
Spr Sensor ◽  
Different Types ◽  
Sensor Properties

Single layers of tin selenide (SnSe), which have a similar structure as graphene and phosphorene, also show excellent optoelectronic properties, and have received much attention as a two-dimensional (2D) material beyond other 2D material family members. Surface plasmon resonance (SPR) sensors based on three monolayer SnSe allotropes are investigated with the transfer matrix method. The simulated results have indicated that the proposed SnSe-containing biochemical sensors are suitable to detect different types of analytes. Compared with the conventional Ag-only film biochemical sensor whose sensitivity is 116°/RIU, the sensitivities of these SnSe-based biochemical sensors containing α-SnSe, δ-SnSe, ε-SnSe, were obviously increased to 178°/RIU, 156°/RIU and 154°/RIU, respectively. The diverse biosensor sensitivities achieved with these three SnSe allotropes suggest that these 2D materials can adjust SPR sensor properties.

scholarly journals Sensitivity Enhancement of a Surface Plasmon Resonance Sensor with Platinum Diselenide

Sensors ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 131 ◽  
Author(s):  
Yue Jia ◽  
Zhongfu Li ◽  
Haiqi Wang ◽  
Muhammad Saeed ◽  
Houzhi Cai
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Biochemical Sensors ◽  
2D Material ◽  
Au Film ◽  
Spr Sensor ◽  
Resonance Sensor ◽  
Sensor Properties ◽  
Index Unit

The extraordinary optoelectronic properties of platinum diselenide (PtSe2), whose structure is similar to graphene and phosphorene, has attracted great attention in new rapidly developed two-dimensional (2D) materials beyond the other 2D material family members. We have investigated the surface plasmon resonance (SPR) sensors through PtSe2 with the transfer matrix method. The simulation results show that the anticipated PtSe2 biochemical sensors have the ability to detect analytic. It is evident that only the sensitivities of Ag or Au film biochemical sensors were observed at 118°/RIU (refractive index unit) and 130°/RIU, whereas the sensitivities of the PtSe2-based biochemical sensors reached as high as 162°/RIU (Ag film) and 165°/RIU (Au film). The diverse biosensor sensitivities with PtSe2 suggest that this kind of 2D material can adapt SPR sensor properties.

scholarly journals Sensitivity Improvement of a Surface Plasmon Resonance Sensor Based on Two-Dimensional Materials Hybrid Structure in Visible Region: A Theoretical Study

Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2445 ◽  
Author(s):  
Zhining Lin ◽  
Shujing Chen ◽  
Chengyou Lin
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
2D Materials ◽  
Incident Light ◽  
Visible Region ◽  
Hybrid Structure ◽  
Two Dimensional ◽  
Spr Sensor ◽  
Sensitivity Improvement

In this paper, we propose a surface plasmon resonance (SPR) sensor based on two-dimensional (2D) materials (graphene, MoS2, WS2 and WSe2) hybrid structure, and theoretically investigate its sensitivity improvement in the visible region. The thickness of metal (Au, Ag or Cu) and the layer number of each 2D material are optimized using genetic algorithms to obtain the highest sensitivity for a specific wavelength of incident light. Then, the sensitivities of proposed SPR sensors with different metal films at various wavelengths are compared. An Ag-based SPR sensor exhibits a higher sensitivity than an Au- or Cu-based one at most wavelengths in the visible region. In addition, the sensitivity of the proposed SPR sensor varies obviously with the wavelength of incident light, and shows a maximum value of 159, 194 or 155°/RIU for Au, Ag or Cu, respectively. It is demonstrated that the sensitivity of the SPR sensor based on 2D materials’ hybrid structure can be further improved by optimizing the wavelength of incident light.

scholarly journals Surface Plasmonic Sensors: Sensing Mechanism and Recent Applications

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5262
Author(s):  
Qilin Duan ◽  
Yineng Liu ◽  
Shanshan Chang ◽  
Huanyang Chen ◽  
Jin-hui Chen
Keyword(s):  
Surface Plasmon Resonance ◽  
Optical Fiber ◽  
Surface Plasmon ◽  
Optical Sensors ◽  
Plasmon Resonance ◽  
2D Materials ◽  
Localized Surface Plasmon ◽  
Plasmonic Sensors ◽  
Hyperbolic Dispersion ◽  
Challenges And Opportunities

Surface plasmonic sensors have been widely used in biology, chemistry, and environment monitoring. These sensors exhibit extraordinary sensitivity based on surface plasmon resonance (SPR) or localized surface plasmon resonance (LSPR) effects, and they have found commercial applications. In this review, we present recent progress in the field of surface plasmonic sensors, mainly in the configurations of planar metastructures and optical-fiber waveguides. In the metastructure platform, the optical sensors based on LSPR, hyperbolic dispersion, Fano resonance, and two-dimensional (2D) materials integration are introduced. The optical-fiber sensors integrated with LSPR/SPR structures and 2D materials are summarized. We also introduce the recent advances in quantum plasmonic sensing beyond the classical shot noise limit. The challenges and opportunities in this field are discussed.

scholarly journals Microstructured Surface Plasmon Resonance Sensor Based on Inkjet 3D Printing Using Photocurable Resins with Tailored Refractive Index

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2518
Author(s):  
Nunzio Cennamo ◽  
Lorena Saitta ◽  
Claudio Tosto ◽  
Francesco Arcadio ◽  
Luigi Zeni ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
3D Printing ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Optical Sensor ◽  
Low Cost ◽  
3D Print ◽  
Spr Sensor ◽  
Resonance Sensor ◽  
3D Printed

In this work, a novel approach to realize a plasmonic sensor is presented. The proposed optical sensor device is designed, manufactured, and experimentally tested. Two photo-curable resins are used to 3D print a surface plasmon resonance (SPR) sensor. Both numerical and experimental analyses are presented in the paper. The numerical and experimental results confirm that the 3D printed SPR sensor presents performances, in term of figure of merit (FOM), very similar to other SPR sensors made using plastic optical fibers (POFs). For the 3D printed sensor, the measured FOM is 13.6 versus 13.4 for the SPR-POF configuration. The cost analysis shows that the 3D printed SPR sensor can be manufactured at low cost (∼15 €) that is competitive with traditional sensors. The approach presented here allows to realize an innovative SPR sensor showing low-cost, 3D-printing manufacturing free design and the feasibility to be integrated with other optical devices on the same plastic planar support, thus opening undisclosed future for the optical sensor systems.

scholarly journals An Enhanced Plastic Optical Fiber-Based Surface Plasmon Resonance Sensor with a Double-Sided Polished Structure

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1516
Author(s):  
Lian Liu ◽  
Shijie Deng ◽  
Jie Zheng ◽  
Libo Yuan ◽  
Hongchang Deng ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
Optical Fiber ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Low Cost ◽  
Fiber Axis ◽  
Plastic Optical Fiber ◽  
Au Film ◽  
Spr Sensor ◽  
Resonance Sensor

An enhanced plastic optical fiber (POF)-based surface plasmon resonance (SPR) sensor is proposed by employing a double-sided polished structure. The sensor is fabricated by polishing two sides of the POF symmetrically along with the fiber axis, and a layer of Au film is deposited on each side of the polished region. The SPR can be excited on both polished surfaces with Au film coating, and the number of light reflections will be increased by using this structure. The simulation and experimental results show that the proposed sensor has an enhanced SPR effect. The visibility and full width at half maximum (FWHM) of spectrum can be improved for the high measured refractive index (RI). A sensitivity of 4284.8 nm/RIU is obtained for the double-sided POF-based SPR sensor when the measured liquid RI is 1.42. The proposed SPR sensor is easy fabrication and low cost, which can provide a larger measurement range and action area to the measured samples, and it has potential application prospects in the oil industry and biochemical sensing fields.

scholarly journals Surface Plasmon Resonance Based on Molecularly Imprinted Polymeric Film for l-Phenylalanine Detection

Biosensors ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 21
Author(s):  
Duygu Çimen ◽  
Nilay Bereli ◽  
Adil Denizli
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Limit Of Detection ◽  
Kinetic Studies ◽  
Force Microscopy ◽  
Spr Sensor ◽  
Atomic Force ◽  
Analysis Technique ◽  
Molecular Imprinting Technology

In this study, we designed a simple, rapid, sensitive and selective surface plasmon resonance (SPR) sensor for detection of L-phenylalaine by utilizing molecular imprinting technology. l-phenylalanine imprinted and non-imprinted poly(2-hydroxyethyl methacrylate-methacryloyl-l-phenylalanine) polymeric films were synthesized onto SPR chip surfaces using ultraviolet polymerization. l-phenyalanine imprinted and non-imprinted SPR sensors were characterized by using contact angle, atomic force microscopy and ellipsometry. After characterization studies, kinetic studies were carried out in the concentration range of 5.0–400.0 μM. The limit of detection and quantification were obtained as 0.0085 and 0.0285 μM, respectively. The response time for the test including equilibration, adsorption and desorption was approximately 9 min. The selectivity studies of the l-phenylalanine imprinted SPR sensor was performed in the presence of d-phenylalanine and l-tryptophan. Validation studies were carried out via enzyme-linked immunosorbent analysis technique in order to demonstrate the applicability and superiority of the l-phenylalanine imprinted SPR sensor.

scholarly journals Cellulose and Vanadium Plasmonic Sensor to Measure Ni2+ Ions

2021 ◽  
Vol 11 (7) ◽  
pp. 2963
Author(s):  
Nur Alia Sheh Omar ◽  
Yap Wing Fen ◽  
Irmawati Ramli ◽  
Umi Zulaikha Mohd Azmi ◽  
Hazwani Suhaila Hashim ◽  
...  
Keyword(s):  
Thin Film ◽  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Signal To Noise Ratio ◽  
Affinity Constant ◽  
Detection Accuracy ◽  
Plasmonic Sensor ◽  
Spr Sensor ◽  
Resonance Sensor

A novel vanadium–cellulose composite thin film-based on angular interrogation surface plasmon resonance (SPR) sensor for ppb-level detection of Ni(II) ion was developed. Experimental results show that the sensor has a linear response to the Ni(II) ion concentrations in the range of 2–50 ppb with a determination coefficient (R2) of 0.9910. This SPR sensor can attain a maximum sensitivity (0.068° ppb−1), binding affinity constant (1.819 × 106 M−1), detection accuracy (0.3034 degree−1), and signal-to-noise-ratio (0.0276) for Ni(II) ion detection. The optical properties of thin-film targeting Ni(II) ions in different concentrations were obtained by fitting the SPR reflectance curves using the WinSpall program. All in all, the proposed Au/MPA/V–CNCs–CTA thin-film-based surface plasmon resonance sensor exhibits better sensing performance than the previous film-based sensor and demonstrates a wide and promising technology candidate for environmental monitoring applications in the future.

2D Materials for Surface Plasmon Resonance-based Sensors

2021 ◽  
Author(s):  
Sanjeev Kumar Raghuwanshi ◽  
Santosh Kumar ◽  
Yadvendra Singh
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
2D Materials
Sign in / Sign up

Export Citation Format

Share Document