scholarly journals Validation of Finite Element Model by Smart Aggregate-Based Stress Monitoring

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 4062 ◽  
Author(s):  
Haibin Zhang ◽  
Shuang Hou ◽  
Jinping Ou
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Lateral Displacement ◽  
Concrete Strength ◽  
Reaction Force ◽  
Element Model ◽  
Fe Model ◽  
Stress Monitoring ◽  
Monitoring Method ◽  
Smart Aggregate

Concrete compressive strength is an important parameter of material properties for assessing seismic performance of reinforced concrete (RC) structures, which has a certain level of uncertainty due to its inherent variability. In this paper, the method of concrete strength validation of finite element model using smart aggregate (SA)-based stress monitoring is proposed. The FE model was established using Open System for Earthquake Engineering Simulation (OpenSEES) platform. The concrete strengths obtained from the material test, peak stress of SA, and estimated concrete strength based on SA stress were employed in FE models. The lateral displacement monitored by Liner variable differential transformer and vertical axial load monitored by load cell in the experiment are applied in the model. By comparing the global response (i.e., lateral reaction force and hysteretic loop), local response (i.e., concrete stress, rebar strain, and cross-section moment) and corresponding root-mean-square error obtained from experiment and numerical analysis, the capabilities of validation of FE model using SA-based stress monitoring method were demonstrated.

Finite Element Model of Human Cochlea Considering of the Helicotrema Size

2013 ◽  
Vol 456 ◽  
pp. 576-581 ◽  
Author(s):  
Li Fu Xu ◽  
Na Ta ◽  
Zhu Shi Rao ◽  
Jia Bin Tian
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Basilar Membrane ◽  
Round Window ◽  
Element Model ◽  
Oval Window ◽  
Fe Model ◽  
Cochlear Duct ◽  
Human Cochlea ◽  
Set Up

A 2-D finite element model of human cochlea is established in this paper. This model includes the structure of oval window, round window, basilar membrane and cochlear duct which is filled with fluid. The basilar membrane responses are calculated with sound input on the oval window membrane. In order to study the effects of helicotrema on basilar membrane response, three different helicotrema dimensions are set up in the FE model. A two-way fluid-structure interaction numerical method is used to compute the responses in the cochlea. The influence of the helicotrema is acquired and the frequency selectivity of the basilar membrane motion along the cochlear duct is predicted. These results agree with the experiments and indicate much better results are obtained with appropriate helicotrema size.

scholarly journals Experimental Study of Friction Resistance between Steel and Concrete in Prefabricated Composite Beam with High-Strength Frictional Bolt

2020 ◽  
Vol 2020 ◽  
pp. 1-13 ◽  
Author(s):  
Qi Guo ◽  
Qing-wei Chen ◽  
Ying Xing ◽  
Ya-ning Xu ◽  
Yi Zhu
Keyword(s):  
Finite Element ◽  
Friction Coefficient ◽  
Finite Element Model ◽  
Bearing Capacity ◽  
Concrete Strength ◽  
High Strength ◽  
Element Model ◽  
Construction Time ◽  
Friction Behavior ◽  
Friction Resistance

Prefabrication of composites beam reduces the construction time and makes them easily to be assembled, deconstructed, and partially repaired. The use of high-strength frictional bolt shear connectors can greatly enhance the sustainability of infrastructure. However, researches about the concrete-steel friction behavior are very limited. To provide a contribution to this area, 21 tests were conducted to measure the friction coefficient and slip stiffness with different concrete strength, steel strength, and surface treatment of steel. An effective finite element model was developed to investigate the ultimate bearing capacity and load-slip characteristics of bolt shear connection. The accuracy of the proposed finite element model is validated by the tests in this paper. The results demonstrate a positive correlation between concrete strength and friction coefficient and better performance of shot-blasted steel. It is also proved that high-strength frictional bolt has a 30% lower bearing capacity but better strength reserve and antiuplifting than the headed stud.

Automotive Glass Exciter Technology for Acoustic Application

2014 ◽  
Author(s):  
Babak Ebrahimi ◽  
Amir Khajepour ◽  
Todd Deaville
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Experimental Studies ◽  
Element Model ◽  
Fe Model ◽  
Component Level ◽  
Modeling And Analysis ◽  
Electric Actuator ◽  
Conventional Systems ◽  
Fine Tune

This paper discusses the modeling and analysis of a novel audio subwoofer system for automotive applications using the automobile windshield glass. The use of a piezo-electric actuator coupled with a mechanical amplifier linked to a large glass panel provides a highly efficient method of producing sound. The proposed subwoofer system has the advantage over existing conventional systems of not only reducing the weight of the automobile, but also a significant power savings resulting in an increase of expected fuel economy. Among various design challenges, the glass-sealing design is of huge importance, as it affects the system dynamic response and so the output sound characteristics. The main goal in this manuscript is to evaluate different glass-sealing design configurations by providing a comprehensive Finite Element model of the system. To do so, a comprehensive, yet simplified FE model is developed, and experimental studies are performed in the component level to fine-tune and verify the model. Harmonic response of the system for each sealing configuration design is obtained in the frequency range of 0–200 Hz, and the results are compared and discussed. The finite element model is also beneficial in preliminary design of other components as well as the exciter placement, and predicting the performance of the overall system.

A reaction-force-validated soccer ball finite element model

2016 ◽  
Vol 231 (1) ◽  
pp. 43-49 ◽  
Author(s):  
Zahari Taha ◽  
Mohd Hasnun Arif Hassan
Keyword(s):  
Experimental Data ◽  
Finite Element ◽  
Finite Element Model ◽  
Reaction Force ◽  
Element Model ◽  
Optimal Number ◽  
Ball Impact ◽  
Soccer Ball ◽  
Mesh Density ◽  
Good Agreement

The soccer ball is one of the important pieces of equipment in the game of soccer. It undergoes various forms of impact during the game. In order to numerically investigate the occasions of ball impact such as soccer heading, a validated finite element model of a soccer ball is required. Therefore, a model was developed incorporating material properties obtained from literature. To ensure the accuracy of the model, it was validated against an established soccer ball model and experimental data of the coefficient of restitution, contact time, longitudinal deformation and reaction force. In addition, a parametric study of the mesh density was also performed to determine the optimal number of elements. The developed soccer ball model was found to be in a good agreement with the literature and experimental data. This suggests that, the soccer ball model is capable of replicating the impacts of interest. This article details the development of the model and the validation processes.

Design and Fatigue Life Analysis of a Motorcycle Frame

2014 ◽  
Author(s):  
Massimiliano Gobbi ◽  
Giorgio Previati ◽  
Giampiero Mastinu
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Finite Element Model ◽  
Experimental Tests ◽  
Element Model ◽  
Fe Model ◽  
Static Test ◽  
Weld Toe ◽  
Fatigue Life Analysis ◽  
Motorcycle Frame

An off-road motorcycle frame has been analyzed and modified to optimize its fatigue life. The fatigue life of the frame is very important to define the service life of the motorcycle. The strain levels on key parts of the frame were collected during experimental tests. It has been possible to locate the areas where the maximum stress level is reached. A finite element (FE) model of the frame has been developed and used for estimating its fatigue life. Static test bench results have been used to validate the FE model. The accuracy of the finite element model is good, the errors are always below 5% with respect to measured data. The mission profile of the motorcycle is dominated by off-road use, with stress levels close to yield point, so a strain-life approach has been applied for estimating the fatigue life of the frame. Particular attention has been paid to the analysis of the welded connections. A shell and a 3D FE model have been combined to simulate the stress histories at the welds. Two reference maneuvers have been considered as loading conditions. The computed stresses have been used to assess the life of the frame according to the notch stress approach (Radaj & Seeger). The method correlates the stress range in a idealized notch, characterized by a fictitious radius in the weld toe or root, to the fatigue life by using a single S-N curve. New technical frame layouts have been proposed and verified by means of the developed finite element model. The considered approach allows to speed up the design process and to reduce the testing phase.

scholarly journals Modeling the flexural behavior of corroded reinforced concrete beams with considering stirrups corrosion

2020 ◽  
Vol 14 (3) ◽  
pp. 26-39
Author(s):  
Nguyen Ngoc Tan ◽  
Nguyen Trung Kien
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Finite Element Model ◽  
Limit State ◽  
Nonlinear Behavior ◽  
Element Model ◽  
Reinforced Concrete Beams ◽  
Flexural Behavior ◽  
Bending Test ◽  
Fe Model

The reinforcement corrosion is one of the most dominant deterioration mechanisms of existing reinforced concrete structures. In this paper, the effects of the stirrup corrosion on the structural performance of five corroded beams have been simulated using the finite element model with DIANA software. These tested beams are divided into two groups for considering different inputs: (i) without corroded stirrups in flexural span, (ii) with locally corroded stirrups at different locations (e.g. full span, shear span, middle span). FE model has been calibrated with experimental results that were obtained from the four-point bending test carried out on the tested beams. This study shows that the stirrups corrosion should be received more attention in the serviceability limit state since its considerable effect on flexural behavior. Based on a parametric study, it shows that the effect of the cross-section loss of tension reinforcements on the load-carrying capacity of the corroded beam is more significant than the bond strength reduction. Keywords: reinforced concrete; beam; stirrup corrosion; finite element model; flexural nonlinear behavior.

Thermal Reliability Design and Optimization for Multilayer Composite Electronic Boards

2005 ◽  
Author(s):  
Amir Khalilollahi ◽  
Russell L. Warley ◽  
Oladipo Onipede
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Stress Intensity ◽  
Finite Element Model ◽  
Element Model ◽  
Fe Model ◽  
Transfer Coefficients ◽  
Thermal Reliability ◽  
Irreversible Damage ◽  
Heat Transfer Coefficients

Boards made of composites are susceptible of structural failure or irreversible damage under thermally raised stresses. A thermal/structural finite element model is integrated in this study to enable the predictions of the temperature and stress distribution of vertically clamped parallel circuit boards that include series of symmetrically mounted heated electronic modules (chips). The board is modeled as a thin plate containing four heated flush rectangular areas that represent the electronic modules. The finite element model should be to able to accept the convection heat transfer on the board surface, heat generation in the modules, and directional conduction inside the board. A detailed 3-D CFD model is incorporated to predict the conjugate heat transfer coefficients that strongly affect the temperature distribution in the board and modules. Structural analyses are performed by a FE model that uses the heat transfer coefficients mentioned above, and structural elements capable of handling orthotropic material properties. The stress fields are obtained and studied for the models possessing two and there laminates with different fiber orientations, and inter-fiber angles. Appreciable differences in values of max stress intensity were observed as the fiber orientation and inter-fiber angle changed. The angular parameters in this study were guided by experimental design (DOE) concepts leading to a metamodel of the stress intensity in the board. The optimum design variables found by the equations of the metamodel.

A Meta-Modeling Procedure for Updating the Finite Element Model of an Arch Bridge Model

2013 ◽  
Vol 540 ◽  
pp. 79-86
Author(s):  
De Jun Wang ◽  
Yang Liu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Analysis ◽  
Large Scale ◽  
Model Updating ◽  
Element Model ◽  
Fe Model ◽  
Large Scale Structures ◽  
Bridge Model ◽  
Scale Structures

Finite element (FE) model updating of structures using vibration test data has received considerable attentions in recent years due to its crucial role in fields ranging from establishing a reality-consistent structural model for dynamic analysis and control, to providing baseline model for damage identification in structural health monitoring. Model updating is to correct the analytical finite element model using test data to produce a refined one that better predict the dynamic behavior of structure. However, for real complex structures, conventional updating methods is difficult to be utilized to update the FE model of structures due to the heavy computational burden for the dynamic analysis. Meta-model is an effective surrogate model for dynamic analysis of large-scale structures. An updating method based on the combination between meta-model and component mode synthesis (CMS) is proposed to improve the efficiency of model updating of large-scale structures. The effectiveness of the proposed method is then validated by updating a scaled suspender arch bridge model using the simulated data.

Validation of FMVSS201 Featureless Headform Finite Element Model for Rotational Acceleration

2001 ◽  
Author(s):  
Saeed D. Barbat
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Fe Model ◽  
Rotational Acceleration ◽  
Acceleration Time ◽  
Acceleration Time Histories ◽  
Time Histories ◽  
Drop Tests ◽  
Constitutive Parameters

Abstract This paper demonstrates an application of the nine linear accelerometer scheme, proposed by (Padgaonkar et al., 1975), to the development and validation of a finite element model of a deformable featureless headform for rotational accelerations. Steps and procedures involved in the development and calibration of the model are also described. A set of tri-axial accelerometers was mounted at the headform center of gravity, C.G., which is located at the origin of the local coordinate axes of the headform. Three bi-axial accelerometers were also mounted at the front, left, and top of the headform’s aluminum skull and on the local coordinate axes of the physical headform. Nine linear accelerations were measured at the headform in drop tests against a rigid plate at impact speeds of 2.68, 4.0, 5.36, and 6.71 m/s (6, 9, 12, and 15 mph). The rotational accelerations of the headform were then calculated from the nine linear acceleration measurements. In the finite element (FE) model of the featureless deformable headform, a visco-elastic material law, available in the non-linear dynamic explicit code PAM-CRASH, was used to simulate the vinyl skin response during impact. The constitutive parameters of the headform’s skin material were calibrated through comparison of the headform drop simulations at various impact speeds with the corresponding tests. Headform responses, such as, resultant acceleration time histories at the headform C.G. and the rotational acceleration time histories obtained from the FE predictions of the headform responses during the drop tests simulations correlated very well with those obtained from experiments. Validation of the headform model for rotational accelerations provided higher level of confidence in the prediction capability of the model when used for interior head impact simulations with vehicle upper interior as specified by the Federal Motor Vehicle Safety Standard FMVSS 201.

Sign in / Sign up

Export Citation Format

Share Document