scholarly journals Adhesive-Free Bonding of Monolithic Sapphire for Pressure Sensing in Extreme Environments

Sensors ◽  
2018 ◽  
Vol 18 (8) ◽  
pp. 2712 ◽  
Author(s):  
Jihaeng Yi
Keyword(s):  
Room Temperature ◽  
Extreme Environments ◽  
Optical Signal ◽  
Harsh Environments ◽  
Free Space Optics ◽  
Pressure Sensing ◽  
Space Optics ◽  
Fabry Perot ◽  
Deflection Theory

This paper presents a monolithic sapphire pressure sensor that is constructed from two commercially available sapphire wafers through a combination of reactive-ion etching and wafer bonding. A Fabry–Perot (FP) cavity is sealed fully between the adhesive-free bonded sapphire wafers and thus acts as a pressure transducer. A combination of standard silica fiber, bonded sapphire wafers and free-space optics is proposed to couple the optical signal to the FP cavity of the sensor. The pressure in the FP cavity is measured by applying both white-light interferometry and diaphragm deflection theory over a range of 0.03 to 3.45 MPa at room temperature. With an all-sapphire configuration, the adhesive-free bonded sapphire sensor is expected to be suitable for in-situ pressure measurements in extreme harsh environments.

scholarly journals Recovery Capabilities of Rateless Codes on Simulated Turbulent Terrestrial Free Space Optics Channel Model

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
A. Andò ◽  
S. Mangione ◽  
L. Curcio ◽  
S. Stivala ◽  
G. Garbo ◽  
...  
Keyword(s):  
Free Space ◽  
Channel Model ◽  
Optical Power ◽  
Optical Signal ◽  
Free Space Optics ◽  
Optical Turbulence ◽  
High Data ◽  
Space Optics ◽  
Error Mitigation ◽  
Channel Codes

Free Space Optics (FSO) links are affected by several impairments: optical turbulence, scattering, absorption, and pointing. In particular, atmospheric optical turbulence generates optical power fluctuations at the receiver that can degrade communications with fading events, especially in high data rate links. Innovative solutions require an improvement of FSO link performances, together with testing models and appropriate channel codes. In this paper, we describe a high-resolution time-correlated channel model able to predict random temporal fluctuations of optical signal irradiance caused by optical turbulence. Concerning the same channel, we also report simulation results on the error mitigation performance of Luby Transform, Raptor, and RaptorQ codes.

Free space optics communication channel with amplitude/frequency shift keying modulation technique based raised cosine line coding

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Mahmoud M.A. Eid ◽  
Vishal Sorathiya ◽  
Sunil Lavadiya ◽  
Ismail A. Abd El-Aziz ◽  
Ahmed Nabih Zaki Rashed
Keyword(s):  
Frequency Shift ◽  
Free Space ◽  
Optical Signal ◽  
Channel Length ◽  
Free Space Optics ◽  
Noise Power ◽  
Frequency Shift Keying ◽  
Space Optics ◽  
Shift Keying ◽  
Modulation Schemes

Abstract The objective of the study is to simulate frequency shift keying (FSK)/amplitude shift keying (ASK) modulation schemes with raised cosine line coding based free space optics channel in clear weather conditions. The max. Q and optical signal/noise ratio (OSNR) with FSO channel length variations are simulated for the previous and proposed models at DRs of 10 Gbps, and also the max. Q factor with data rate (DR) variations is demonstrated for the previous and proposed models at 10 km FSO channel length. Max. Q, min. BER, signal power (SP), noise power, and total optical power (TOP) based FSK and ASK modulation schemes are illustrated through APD receiver with FSO channel length of 10 km.

scholarly journals Free Space Optics: Current Applications and Future Challenges

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Aditi Malik ◽  
Preeti Singh
Keyword(s):  
Atmospheric Turbulence ◽  
Free Space ◽  
Outer Space ◽  
Weather Conditions ◽  
Optical Signal ◽  
Free Space Optics ◽  
Successful Transmission ◽  
Space Optics ◽  
Future Challenges ◽  
High Bandwidth

FSO is a communication system where free space acts as medium between transceivers and they should be in LOS for successful transmission of optical signal. Medium can be air, outer space, or vacuum. This system can be used for communication purpose in hours and in lesser economy. There are many advantages of FSO like high bandwidth and no spectrum license. The transmission in FSO is dependent on the medium because the presence of foreign elements like rain, fog, and haze, physical obstruction, scattering, and atmospheric turbulence are some of these factors. Different studies on weather conditions and techniques employed to mitigate their effect are discussed in this paper.

Otoconia perfect/imperfect crystals

1994 ◽  
Vol 52 ◽  
pp. 42-43
Author(s):  
César D. Fermin ◽  
Dale Martin
Keyword(s):  
Image Processing ◽  
Room Temperature ◽  
Phosphotungstic Acid ◽  
Gallus Domesticus ◽  
Crystal Matrix ◽  
Organic Templates ◽  
Image Processing Algorithms ◽  
Processing Algorithms ◽  
Diffraction Patterns

Otoconia of higher vertebrates are interesting biological crystals that display the diffraction patterns of perfect crystals (e.g., calcite for birds and mammal) when intact, but fail to produce a regular crystallographic pattern when fixed. Image processing of the fixed crystal matrix, which resembles the organic templates of teeth and bone, failed to clarify a paradox of biomineralization described by Mann. Recently, we suggested that inner ear otoconia crystals contain growth plates that run in different directions, and that the arrangement of the plates may contribute to the turning angles seen at the hexagonal faces of the crystals.Using image processing algorithms described earlier, and Fourier Transform function (2FFT) of BioScan Optimas®, we evaluated the patterns in the packing of the otoconia fibrils of newly hatched chicks (Gallus domesticus) inner ears. Animals were fixed in situ by perfusion of 1% phosphotungstic acid (PTA) at room temperature through the left ventricle, after intraperitoneal Nembutal (35mg/Kg) deep anesthesia. Negatives were made with a Hitachi H-7100 TEM at 50K-400K magnifications. The negatives were then placed on a light box, where images were filtered and transferred to a 35 mm camera as described.

In Situ Localization of PPAR Gamma and Uncoupling Protein in Mouse Embryo Sections Using Digoxigenin-Labeled Riboprobes

1996 ◽  
Vol 54 ◽  
pp. 32-33
Author(s):  
C. Jennermann ◽  
S. A. Kliewer ◽  
D. C. Morris
Keyword(s):  
Alkaline Phosphatase ◽  
Room Temperature ◽  
Uncoupling Protein ◽  
Ppar Gamma ◽  
Nuclear Hormone Receptor ◽  
Full Length ◽  
Northern Analysis ◽  
Peroxisome Proliferator

Peroxisome proliferator-activated receptor gamma (PPARg) is a member of the nuclear hormone receptor superfamily and has been shown in vitro to regulate genes involved in lipid metabolism and adipocyte differentiation. By Northern analysis, we and other researchers have shown that expression of this receptor predominates in adipose tissue in adult mice, and appears first in whole-embryo mRNA at 13.5 days postconception. In situ hybridization was used to find out in which developing tissues PPARg is specifically expressed.Digoxigenin-labeled riboprobes were generated using the Genius™ 4 RNA Labeling Kit from Boehringer Mannheim. Full length PPAR gamma, obtained by PCR from mouse liver cDNA, was inserted into pBluescript SK and used as template for the transcription reaction. Probes of average size 200 base pairs were made by partial alkaline hydrolysis of the full length transcripts. The in situ hybridization assays were performed as described previously with some modifications. Frozen sections (10 μm thick) of day 18 mouse embryos were cut, fixed with 4% paraformaldehyde and acetylated with 0.25% acetic anhydride in 1.0M triethanolamine buffer. The sections were incubated for 2 hours at room temperature in pre-hybridization buffer, and were then hybridized with a probe concentration of 200μg per ml at 70° C, overnight in a humidified chamber. Following stringent washes in SSC buffers, the immunological detection steps were performed at room temperature. The alkaline phosphatase labeled, anti-digoxigenin antibody and detection buffers were purchased from Boehringer Mannheim. The sections were treated with a blocking buffer for one hour and incubated with antibody solution at a 1:5000 dilution for 2 hours, both at room temperature. Colored precipitate was formed by exposure to the alkaline phosphatase substrate nitrobluetetrazoliumchloride/ bromo-chloroindlylphosphate.

Single Crystal Growth of High-Pressure Phases of Ice and Salt Hydrate Far Below the Original Melting Point by Mixing Alcohol: Crystal Structure Determination of Magnesium Chloride Heptahydrate

2020 ◽  
Author(s):  
Keishiro Yamashita ◽  
Kazuki Komatsu ◽  
Hiroyuki Kagi
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
Crystal Growth ◽  
Single Crystal ◽  
Room Temperature ◽  
Growth Technique ◽  
Salt Hydrate ◽  
X Ray

An crystal-growth technique for single crystal x-ray structure analysis of high-pressure forms of hydrogen-bonded crystals is proposed. We used alcohol mixture (methanol: ethanol = 4:1 in volumetric ratio), which is a widely used pressure transmitting medium, inhibiting the nucleation and growth of unwanted crystals. In this paper, two kinds of single crystals which have not been obtained using a conventional experimental technique were obtained using this technique: ice VI at 1.99 GPa and MgCl<sub>2</sub>·7H<sub>2</sub>O at 2.50 GPa at room temperature. Here we first report the crystal structure of MgCl2·7H2O. This technique simultaneously meets the requirement of hydrostaticity for high-pressure experiments and has feasibility for further in-situ measurements.

scholarly journals Lithium-mediated Ferration of Fluoroarenes

2020 ◽  
Vol 74 (11) ◽  
pp. 866-870
Author(s):  
Lewis C. H. Maddock ◽  
Alan Kennedy ◽  
Eva Hevia
Keyword(s):  
Hydrogen Atom ◽  
Organometallic Chemistry ◽  
Room Temperature ◽  
Structural Elucidation ◽  
Side Reactions ◽  
Metal Base ◽  
Lithium Amide ◽  
Mixed Metal ◽  
Important Challenge

While fluoroaryl fragments are ubiquitous in many pharmaceuticals, the deprotonation of fluoroarenes using organolithium bases constitutes an important challenge in polar organometallic chemistry. This has been widely attributed to the low stability of the in situ generated aryl lithium intermediates that even at –78 °C can undergo unwanted side reactions. Herein, pairing lithium amide LiHMDS (HMDS = N{SiMe3}2) with FeII(HMDS)2 enables the selective deprotonation at room temperature of pentafluorobenzene and 1,3,5-trifluorobenzene via the mixed-metal base [(dioxane)LiFe(HMDS)3] (1) (dioxane = 1,4-dioxane). Structural elucidation of the organometallic intermediates [(dioxane)Li(HMDS)2Fe(ArF)] (ArF = C6F5, 2; 1,3,5-F3-C6H2, 3) prior electrophilic interception demonstrates that these deprotonations are actually ferrations, with Fe occupying the position previously filled by a hydrogen atom. Notwithstanding, the presence of lithium is essential for the reactions to take place as Fe II (HMDS)2 on its own is completely inert towards the metallation of these substrates. Interestingly 2 and 3 are thermally stable and they do not undergo benzyne formation via LiF elimination.

Sign in / Sign up

Export Citation Format

Share Document