scholarly journals A Comparative Study of Three Types Shear Mode Piezoelectric Wafers in Shear Horizontal Wave Generation and Reception

Sensors ◽  
2018 ◽  
Vol 18 (8) ◽  
pp. 2681 ◽  
Author(s):  
Qiang Huan ◽  
Mingtong Chen ◽  
Faxin Li
Keyword(s):  
Energy Conversion ◽  
Conversion Efficiency ◽  
Energy Conversion Efficiency ◽  
Wave Generation ◽  
Shear Mode ◽  
Sh Wave ◽  
The Face ◽  
Piezoelectric Wafers ◽  
Shear Horizontal ◽  
Thickness Shear

Guided wave-based inspection has emerged as a promising tool to evaluate the reliability of key components in modern industries. The fundamental shear horizontal (SH0) wave is always of great interests for plate-like structures because of its non-dispersion characteristics. However, the generation and reception of SH0 wave using piezoelectric wafers is not straightforward. In this paper, we firstly define three types shear mode piezoelectric wafers, i.e., the conventional in-plane poled thickness-shear (d15) mode, the thickness-poled thickness-shear (d15) mode, and the face-shear (d24) mode. Then, finite element simulations were conducted to demonstrate their performance in SH wave generation and reception. The results indicated that the face shear d24 wafer can generate almost single mode SH0 wave, while both types of d15 wafers would generate Lamb waves and SH0 wave simultaneously. Finally, experiments were carried out to check the efficiency of different shear mode piezoelectric wafers in SH0 wave generation and reception. The results indicated that the d24 wafer can generate and receive SH0 wave of high signal to noise ratio (SNR) with high energy conversion efficiency, while the in-plane poled d15 wafer would generate SH0 wave of high amplitude and acceptable SNR but with relatively low energy conversion efficiency. The performances of thickness-poled d15 wafer was not as good as the other two in both SH wave generation and reception. This work will be helpful for the applications of SH waves in plate-like structures.

Study on the Energy Conversion Efficiency and Spectral Phase of Cross-Polarized Wave Generation Filter

2010 ◽  
Vol 30 (5) ◽  
pp. 1434-1440
Author(s):  
潘雪 Pan Xue ◽  
王艳海 Wang Yanhai ◽  
王江峰 Wang Jiangfeng ◽  
姜有恩 Jiang Youen ◽  
李学春 Li Xuechun
Keyword(s):  
Energy Conversion ◽  
Conversion Efficiency ◽  
Energy Conversion Efficiency ◽  
Wave Generation ◽  
Spectral Phase

First-principles study on the electronic and optical properties of the orthorhombic CsPbBr3 and CsPbI3 with Cmcm space group

2021 ◽  
Author(s):  
Xianhao Zhao ◽  
Tianyu Tang ◽  
Quan Xie ◽  
like gao ◽  
Limin Lu ◽  
...  
Keyword(s):  
Optical Properties ◽  
Solar Cells ◽  
Energy Conversion ◽  
Conversion Efficiency ◽  
First Principles ◽  
Energy Conversion Efficiency ◽  
Space Group ◽  
Absorbing Materials ◽  
Halide Perovskites ◽  
Lead Halide

The cesium lead halide perovskites are regarded as effective candidates for light-absorbing materials in solar cells, which have shown excellent performances in experiments such as promising energy conversion efficiency. In...

Metal-like electrical conductivity in LaxSr2−xTiMoO6 oxides for high temperature thermoelectric power generation

2017 ◽  
Vol 46 (18) ◽  
pp. 5872-5879 ◽  
Author(s):  
Mandvi Saxena ◽  
Tanmoy Maiti
Keyword(s):  
Power Generation ◽  
Electrical Conductivity ◽  
High Temperature ◽  
Energy Conversion ◽  
Thermoelectric Power ◽  
Conversion Efficiency ◽  
Energy Conversion Efficiency ◽  
Power Generators ◽  
Thermoelectric Power Generation

Increasing electrical conductivity in oxides, which are inherently insulators, can be a potential route in developing oxide-based thermoelectric power generators with higher energy conversion efficiency.

Performance Improvements in Cooker-Top Gas Burners for Small Aspect Ratio Changes

2017 ◽  
Vol 9 (4) ◽  
Author(s):  
Robson L. Silva ◽  
Bruno V. Sant′Ana ◽  
José R. Patelli ◽  
Marcelo M. Vieira
Keyword(s):  
Energy Conversion ◽  
Fuel Consumption ◽  
Conversion Efficiency ◽  
Minimum Energy ◽  
Energy Conversion Efficiency ◽  
Energy Performance ◽  
Operating Conditions ◽  
Lower Fuel Consumption ◽  
Performance Improvements ◽  
Aspect Ratios

This paper aims to identify performance improvements in cooker-top gas burners for changes in its original geometry, with aspect ratios (ARs) ranging from 0.25 to 0.56 and from 0.28 to 0.64. It operates on liquefied petroleum gas (LPG) and five thermal power (TP) levels. Considering the large number of cooker-top burners currently being used, even slight improvements in thermal performance resulting from a better design and recommended operating condition will lead to a significant reduction of energy consumption and costs. Appropriate instrumentation was used to carry out the measurements and methodology applied was based on regulations from INMETRO (CONPET program for energy conversion efficiency in cook top and kilns), ABNT (Brazilian Technical Standards Normative) and ANP—National Agency of Petroleum, Natural Gas (NG) and Biofuels. The results allow subsidizing recommendations to minimum energy performance standards (MEPS) for residential use, providing also higher energy conversion efficiency and/or lower fuel consumption. Main conclusions are: (i) Smaller aspect ratios result in the same heating capacity and higher efficiency; (ii) higher aspect ratios (original burners) are fuel consuming and inefficient; (iii) operating conditions set on intermediate are lower fuel consumption without significant differences in temperature increases; (iv) Reynolds number lower than 500 provides higher efficiencies.

Improvement of energy-conversion efficiency from laser to proton beam in a laser-foil interaction

2008 ◽  
Vol 78 (4) ◽  
Author(s):  
Y. Nodera ◽  
S. Kawata ◽  
N. Onuma ◽  
J. Limpouch ◽  
O. Klimo ◽  
...  
Keyword(s):  
Energy Conversion ◽  
Proton Beam ◽  
Conversion Efficiency ◽  
Energy Conversion Efficiency
Sign in / Sign up

Export Citation Format

Share Document