scholarly journals Planar Microstrip Ring Resonators for Microwave-Based Gas Sensing: Design Aspects and Initial Transducers for Humidity and Ammonia Sensing

Sensors ◽  
2017 ◽  
Vol 17 (10) ◽  
pp. 2422 ◽  
Author(s):  
Andreas Bogner ◽  
Carsten Steiner ◽  
Stefanie Walter ◽  
Jaroslaw Kita ◽  
Gunter Hagen ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
Gas Sensing ◽  
Ring Resonators ◽  
Design Parameters ◽  
Optimized Design ◽  
Ammonia Sensing ◽  
Resonator Structure ◽  
Zeolite Film ◽  
Microstrip Ring ◽  
Microstrip Ring Resonator

A planar microstrip ring resonator structure on alumina was developed using the commercial FEM software COMSOL. Design parameters were evaluated, eventually leading to an optimized design of a miniaturized microwave gas sensor. The sensor was covered with a zeolite film. The device was successfully operated at around 8.5 GHz at room temperature as a humidity sensor. In the next step, an additional planar heater will be included on the reverse side of the resonator structure to allow for testing of gas-sensitive materials under sensor conditions.

scholarly journals Planar Microstrip Ring Resonator Structure for Gas Sensing and Humidity Sensing Purposes

Proceedings ◽  
2017 ◽  
Vol 1 (4) ◽  
pp. 414
Author(s):  
Andreas Bogner ◽  
Carsten Steiner ◽  
Stefanie Walter ◽  
Jaroslaw Kita ◽  
Gunter Hagen ◽  
...  
Keyword(s):  
Room Temperature ◽  
Humidity Sensor ◽  
Ring Resonator ◽  
Gas Sensing ◽  
Humidity Sensing ◽  
Resonator Structure ◽  
Zeolite Film ◽  
Microstrip Ring ◽  
Microstrip Ring Resonator

A planar microstrip ring resonator structure on alumina was developed. It was covered with a zeolite film. The device was successfully operated at around 8.5 GHz at room temperature as a humidity sensor. In the next step, an additional planar heater will be included on the reverse side of the resonator structure to allow for testing of gas sensitive materials under sensor conditions.

Metal-oxide based ammonia gas sensors: A review

2020 ◽  
Vol 10 ◽  
Author(s):  
Priya Gupta ◽  
Savita Maurya ◽  
Narendra Kumar Pandey ◽  
Vernica Verma
Keyword(s):  
Metal Oxide ◽  
Metal Oxides ◽  
Gas Sensor ◽  
Gas Sensors ◽  
Review Paper ◽  
Gas Sensing ◽  
Gas Sensitivity ◽  
Ammonia Gas ◽  
Ammonia Sensing ◽  
Ammonia Gas Sensors

: This review paper encompasses a study of metal-oxide and their composite based gas sensors used for the detection of ammonia (NH3) gas. Metal-oxide has come into view as an encouraging choice in the gas sensor industry. This review paper focuses on the ammonia sensing principle of the metal oxides. It also includes various approaches adopted for increasing the gas sensitivity of metal-oxide sensors. Increasing the sensitivity of the ammonia gas sensor includes size effects and doping by metal or other metal oxides which will change the microstructure and morphology of the metal oxides. Different parameters that affect the performances like sensitivity, stability, and selectivity of gas sensors are discussed in this paper. Performances of the most operated metal oxides with strengths and limitations in ammonia gas sensing application are reviewed. The challenges for the development of high sensitive and selective ammonia gas sensor are also discussed.

Measurements of material and circuit properties using a microstrip ring-resonator circuit on zirconia at 77K

1993 ◽  
Author(s):  
M.W. Hosking ◽  
B.A. Tonkin ◽  
Y.G. Proykova ◽  
A. Hewitt ◽  
N.McN. Alford ◽  
...  
Keyword(s):  
Ring Resonator ◽  
Microstrip Ring ◽  
Microstrip Ring Resonator

A Study of the Anchor Effect Based on Structural Parameters of Flexible Pressurized Anchor and Pressure from Surrounding Rock

2011 ◽  
Vol 71-78 ◽  
pp. 4634-4637
Author(s):  
Tian Lin Cui ◽  
Jing Kun Pi ◽  
Yong Hui Liu ◽  
Zhen Hua He
Keyword(s):  
Structural Parameters ◽  
Structural Features ◽  
Surrounding Rock ◽  
Design Parameters ◽  
Optimized Design ◽  
Anchor Effect ◽  
The Finite Element Method ◽  
Anchor System ◽  
New Type ◽  
Stress Relation

In order to optimize the design of flexible pressurized anchor, this paper gives a further analysis on structural features of the new type of flexible pressurized anchor and carries out a contact analysis on anchor system by using the finite element method. It calculates as well as researches the contact stress relation of interactional anchor rod and surrounding rock under the circumstance of anchoring, obtaining the law of all major design parameters of anchor rod structure and pressure from surrounding rock influencing the anchoring performance and arriving at the conclusion that the anchor rod is adapted to various conditions of surrounding rock. They not only serve as important references for optimized design and application of anchor rod, but also provide a basis for the experiment of new type of anchor rod.

Silicon photonic devices for mid-infrared applications

Nanophotonics ◽  
2014 ◽  
Vol 3 (4-5) ◽  
pp. 329-341 ◽  
Author(s):  
Raji Shankar ◽  
Marko Lončar
Keyword(s):  
Gas Sensing ◽  
Wavelength Region ◽  
Photonic Devices ◽  
Ring Resonators ◽  
Space Communications ◽  
Mid Infrared ◽  
Silicon Photonic ◽  
Processing Techniques ◽  
Silicon Based

AbstractThe mid-infrared (IR) wavelength region (2–20 µm) is of great interest for a number of applications, including trace gas sensing, thermal imaging, and free-space communications. Recently, there has been significant progress in developing a mid-IR photonics platform in Si, which is highly transparent in the mid-IR, due to the ease of fabrication and CMOS compatibility provided by the Si platform. Here, we discuss our group’s recent contributions to the field of silicon-based mid-IR photonics, including photonic crystal cavities in a Si membrane platform and grating-coupled high-quality factor ring resonators in a silicon-on-sapphire (SOS) platform. Since experimental characterization of microphotonic devices is especially challenging at the mid-IR, we also review our mid-IR characterization techniques in some detail. Additionally, pre- and post-processing techniques for improving device performance, such as resist reflow, Piranha clean/HF dip cycling, and annealing are discussed.

Feasibility Study of Designing a Three Legged Walking Robot: Tribot

1991 ◽  
Author(s):  
Yueh-Jaw Lin ◽  
Aaron Tegland
Keyword(s):  
Feasibility Study ◽  
Legged Robots ◽  
Walking Robots ◽  
Design Parameters ◽  
Optimized Design ◽  
Motion Simulation ◽  
Walking Robot ◽  
Design Considerations ◽  
Simulation Based ◽  
Weight Distributions

Abstract In recent years, walking robot research has become an important robotic research topic because walking robots possess mobility, as oppose to stationary robots. However, current walking robot research has only concentrated on even numbered legged robots. Walking robots with odd numbered legs are still lack of attention. This paper presents the study on an odd numbered legged (three-legged) walking robot — Tribot. The feasibility of three-legged walking is first investigated using computer simulation based on a scaled down tribot model. The computer display of motion simulation shows that a walking robot with three legs is feasible with a periodic gait. During the course of the feasibility study, the general design of the three-legged robot is also analyzed for various weights, weight distributions, and link lengths. In addition, the optimized design parameters and limitations are found for certain knee arrangements. These design considerations and feasibility study using computer display can serve as a general guideline for designing odd numbered legged robots.

Sign in / Sign up

Export Citation Format

Share Document