scholarly journals Effects of Temperature and X-rays on Plastic Scintillating Fiber and Infrared Optical Fiber

Sensors ◽  
2015 ◽  
Vol 15 (5) ◽  
pp. 11012-11026 ◽  
Author(s):  
Bongsoo Lee ◽  
Sang Shin ◽  
Kyoung Jang ◽  
Wook Yoo
1983 ◽  
Vol 11 (11) ◽  
pp. 834-841 ◽  
Author(s):  
Masaru IKEDO ◽  
Hiromasa ISHIWATARI ◽  
Masafumi WATARI ◽  
Hiroshi TSUTSUI ◽  
Osamu YAMAMOTO

2008 ◽  
Vol 17 (6) ◽  
pp. 397-405
Author(s):  
Wook-Jae Yoo ◽  
Jeong-Ki Seo ◽  
Dong-Hyun Cho ◽  
Kyoung-Won Jang ◽  
Sang-Hun Shin ◽  
...  

Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4510 ◽  
Author(s):  
Sylvain Girard ◽  
Adriana Morana ◽  
Cornelia Hoehr ◽  
Michael Trinczek ◽  
Jeoffray Vidalot ◽  
...  

The potential of fiber-based sensors to monitor the fluence of atmospheric neutrons is evaluated through accelerated tests at the TRIUMF Neutron Facility (TNF) (BC, Canada), offering a flux approximatively 109 higher than the reference spectrum observed under standard conditions in New York City, USA. The radiation-induced attenuation (RIA) at 1625 nm of a phosphorus-doped radiation sensitive optical fiber is shown to linearly increase with neutron fluence, allowing an in situ and easy monitoring of the neutron flux and fluence at this facility. Furthermore, our experiments show that the fiber response remains sensitive to the ionization processes, at least up to a fluence of 7.1 × 1011 n cm−², as its radiation sensitivity coefficient (~3.36 dB km−1 Gy−1) under neutron exposure remains very similar to the one measured under X-rays (~3.8 dB km−1 Gy−1) at the same wavelength. The presented results open the way to the development of a point-like or even a distributed dosimeter for natural or man-made neutron-rich environments. The feasibility to measure the dose caused by the neutron exposure during stratospheric balloon experiments, or during outer space missions, is presented as a case study of a potential future application.


2020 ◽  
Vol 67 (7) ◽  
pp. 1658-1662
Author(s):  
Jessica Bahout ◽  
Youcef Ouerdane ◽  
Hicham El Hamzaoui ◽  
Geraud Bouwmans ◽  
Mohamed Bouazaoui ◽  
...  

Author(s):  
Xie Tianci ◽  
Bo He ◽  
Qieming Shi ◽  
Jinqian Qian ◽  
Wenjing Hao ◽  
...  

Abstract Measurements using an Optical Fiber OFS including an inorganic scintillator placed on the surface of a phantom show that the particle energy distribution inside the phantom remains unchanged. The backscattered intensity measured using an Optical Fiber Sensor (OFS) exhibits a linear relationship with the total radiation dose delivered to the phantom, and this relationship shows that the OFS can be used for indirect dose measurement when located on the surface of the phantom i.e. that arising from the energetic backscattered electrons and photons. Such a device can therefore be used as a clinical in-vivo dosimeter, being located on the patient’s body surface. In addition, the measurement results for the same OFS located inside and outside the radiation field of a compound water based phantom are analyzed. The differences in measurement of the fluorescence signal in response to various tissue materials representing bone or tumor tissue in the irradiation field are strongly related to the material's ability to block the scattered rays from the water phantom, as well as the scattered X-rays generated by the material located within the phantom.


Sign in / Sign up

Export Citation Format

Share Document