scholarly journals Meteosat Land Surface Temperature Climate Data Record: Achievable Accuracy and Potential Uncertainties

2015 ◽  
Vol 7 (10) ◽  
pp. 13139-13156 ◽  
Author(s):  
Anke Duguay-Tetzlaff ◽  
Virgílio Bento ◽  
Frank Göttsche ◽  
Reto Stöckli ◽  
João Martins ◽  
...  
2018 ◽  
Vol 10 (10) ◽  
pp. 1640 ◽  
Author(s):  
Ralph Ferraro ◽  
Brian Nelson ◽  
Tom Smith ◽  
Olivier Prat

Passive microwave measurements have been available on satellites back to the 1970s, first flown on research satellites developed by the National Aeronautics and Space Administration (NASA). Since then, several other sensors have been flown to retrieve hydrological products for both operational weather applications (e.g., the Special Sensor Microwave/Imager—SSM/I; the Advanced Microwave Sounding Unit—AMSU) and climate applications (e.g., the Advanced Microwave Scanning Radiometer—AMSR; the Tropical Rainfall Measurement Mission Microwave Imager—TMI; the Global Precipitation Mission Microwave Imager—GMI). Here, the focus is on measurements from the AMSU-A, AMSU-B, and Microwave Humidity Sounder (MHS). These sensors have been in operation since 1998, with the launch of NOAA-15, and are also on board NOAA-16, -17, -18, -19, and the MetOp-A and -B satellites. A data set called the “Hydrological Bundle” is a climate data record (CDR) that utilizes brightness temperatures from fundamental CDRs (FCDRs) to generate thematic CDRs (TCDRs). The TCDRs include total precipitable water (TPW), cloud liquid water (CLW), sea-ice concentration (SIC), land surface temperature (LST), land surface emissivity (LSE) for 23, 31, 50 GHz, rain rate (RR), snow cover (SC), ice water path (IWP), and snow water equivalent (SWE). The TCDRs are shown to be in general good agreement with similar products from other sources, such as the Global Precipitation Climatology Project (GPCP) and the Modern-Era Retrospective Analysis for Research and Applications (MERRA-2). Due to the careful intercalibration of the FCDRs, little bias is found among the different TCDRs produced from individual NOAA and MetOp satellites, except for normal diurnal cycle differences.


2020 ◽  
Vol 12 (16) ◽  
pp. 2554
Author(s):  
Christopher J. Merchant ◽  
Owen Embury

Atmospheric desert-dust aerosol, primarily from north Africa, causes negative biases in remotely sensed climate data records of sea surface temperature (SST). Here, large-scale bias adjustments are deduced and applied to the v2 climate data record of SST from the European Space Agency Climate Change Initiative (CCI). Unlike SST from infrared sensors, SST measured in situ is not prone to desert-dust bias. An in-situ-based SST analysis is combined with column dust mass from the Modern-Era Retrospective analysis for Research and Applications, Version 2 to deduce a monthly, large-scale adjustment to CCI analysis SSTs. Having reduced the dust-related biases, a further correction for some periods of anomalous satellite calibration is also derived. The corrections will increase the usability of the v2 CCI SST record for oceanographic and climate applications, such as understanding the role of Arabian Sea SSTs in the Indian monsoon. The corrections will also pave the way for a v3 climate data record with improved error characteristics with respect to atmospheric dust aerosol.


2019 ◽  
Vol 11 (16) ◽  
pp. 1947 ◽  
Author(s):  
Lei Ji ◽  
Gabriel B. Senay ◽  
Naga M. Velpuri ◽  
Stefanie Kagone

The Operational Simplified Surface Energy Balance (SSEBop) model uses the principle of satellite psychrometry to produce spatially explicit actual evapotranspiration (ETa) with remotely sensed and weather data. The temperature difference (dT) in the model is a predefined parameter quantifying the difference between surface temperature at bare soil and air temperature at canopy level. Because dT is derived from the average-sky net radiation based primarily on climate data, validation of the dT estimation is critical for assuring a high-quality ETa product. We used the Moderate Resolution Imaging Spectroradiometer (MODIS) data to evaluate the SSEBop dT estimation for the conterminous United States. MODIS data (2008–2017) were processed to compute the 10-year average land surface temperature (LST) and normalized difference vegetation index (NDVI) at 1 km resolution and 8-day interval. The observed dT (dTo) was computed from the LST difference between hot (NDVI < 0.25) and cold (NDVI > 0.7) pixels within each 2° × 2° sampling block. There were enough hot and cold pixels within each block to create dTo timeseries in the West Coast and South-Central regions. The comparison of dTo and modeled dT (dTm) showed high agreement, with a bias of 0.8 K and a correlation coefficient of 0.88 on average. This study concludes that the dTm estimation from the SSEBop model is reliable, which further assures the accuracy of the ETa estimation.


2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Christopher J. Merchant ◽  
Owen Embury ◽  
Claire E. Bulgin ◽  
Thomas Block ◽  
Gary K. Corlett ◽  
...  

Abstract A climate data record of global sea surface temperature (SST) spanning 1981–2016 has been developed from 4 × 1012 satellite measurements of thermal infra-red radiance. The spatial area represented by pixel SST estimates is between 1 km2 and 45 km2. The mean density of good-quality observations is 13 km−2 yr−1. SST uncertainty is evaluated per datum, the median uncertainty for pixel SSTs being 0.18 K. Multi-annual observational stability relative to drifting buoy measurements is within 0.003 K yr−1 of zero with high confidence, despite maximal independence from in situ SSTs over the latter two decades of the record. Data are provided at native resolution, gridded at 0.05° latitude-longitude resolution (individual sensors), and aggregated and gap-filled on a daily 0.05° grid. Skin SSTs, depth-adjusted SSTs de-aliased with respect to the diurnal cycle, and SST anomalies are provided. Target applications of the dataset include: climate and ocean model evaluation; quantification of marine change and variability (including marine heatwaves); climate and ocean-atmosphere processes; and specific applications in ocean ecology, oceanography and geophysics.


2014 ◽  
Vol 47 (1) ◽  
pp. 655-669 ◽  
Author(s):  
Emre Ozelkan ◽  
Serdar Bagis ◽  
Ertunga Cem Ozelkan ◽  
Burak Berk Ustundag ◽  
Cankut Ormeci

2016 ◽  
Vol 33 (9) ◽  
pp. 1967-1984 ◽  
Author(s):  
Cheng-Zhi Zou ◽  
Haifeng Qian

AbstractObservations from the Stratospheric Sounding Unit (SSU) on board historical NOAA polar-orbiting satellites have played a vital role in investigations of long-term trends and variability in the middle- and upper-stratospheric temperatures during 1979–2006. The successor to SSU is the Advanced Microwave Sounding Unit-A (AMSU-A) starting from 1998 until the present. Unfortunately, the two observations came from different sets of atmospheric layers, and the SSU weighting functions varied with time and location, posing a challenge to merge them with sufficient accuracy for development of an extended SSU climate data record. This study proposes a variational approach for the merging problem, matching in both temperatures and weighting functions. The approach yields zero means with a small standard deviation and a negligible drift over time in the temperature differences between SSU and its extension to AMSU-A. These features made the approach appealing for reliable detection of long-term climate trends. The approach also matches weighting functions with high accuracy for SSU channels 1 and 2 and reasonable accuracy for channel 3. The total decreases in global mean temperatures found from the merged dataset were from 1.8 K in the middle stratosphere to 2.4 K in the upper stratosphere during 1979–2015. These temperature drops were associated with two segments of piecewise linear cooling trends, with those during the first period (1979–97) being much larger than those of the second period (1998–2015). These differences in temperature trends corresponded well to changes of the atmospheric ozone amount from depletion to recovery during the respective time periods, showing the influence of human decisions on climate change.


2020 ◽  
Vol 236 ◽  
pp. 111485 ◽  
Author(s):  
Emy Alerskans ◽  
Jacob L. Høyer ◽  
Chelle L. Gentemann ◽  
Leif Toudal Pedersen ◽  
Pia Nielsen-Englyst ◽  
...  

2018 ◽  
Vol 10 (9) ◽  
pp. 1324 ◽  
Author(s):  
Virgílio Bento ◽  
Isabel Trigo ◽  
Célia Gouveia ◽  
Carlos DaCamara

The Vegetation Health Index (VHI) is widely used for monitoring drought using satellite data. VHI depends on vegetation state and thermal stress, respectively assessed via (i) the Vegetation Condition Index (VCI) that usually relies on information from the visible and near infra-red parts of the spectrum (in the form of Normalized Difference Vegetation Index, NDVI); and (ii) the Thermal Condition Index (TCI), based on top of atmosphere thermal infrared (TIR) brightness temperature or on TIR-derived Land Surface Temperature (LST). VHI is then estimated as a weighted average of VCI and TCI. However, the optimum weights of the two components are usually not known and VHI is usually estimated attributing a weight of 0.5 to both. Using a previously developed methodology for the Euro-Mediterranean region, we show that the multi-scalar drought index (SPEI) may be used to obtain optimal weights for VCI and TCI over the area covered by Meteosat satellites that includes Africa, Europe, and part of South America. The procedure is applied using clear-sky Meteosat Climate Data Records (CDRs) and all-sky LST derived by combining satellite and reanalysis data. Results obtained present a coherent spatial distribution of VCI and TCI weights when estimated using clear- and all-sky LST. This study paves the way for the development of a future VHI near-real time operational product for drought monitoring based on information from Meteosat satellites.


Sign in / Sign up

Export Citation Format

Share Document