scholarly journals Neighboring Discriminant Component Analysis for Asteroid Spectrum Classification

2021 ◽  
Vol 13 (16) ◽  
pp. 3306 ◽  
Author(s):  
Tan Guo ◽  
Xiao-Ping Lu ◽  
Yong-Xiong Zhang ◽  
Keping Yu
Keyword(s):  
Spectral Data ◽  
Nearest Neighbor ◽  
Surface Composition ◽  
Rapid Development ◽  
Feature Learning ◽  
Component Analysis ◽  
Classification Performance ◽  
Support Vector ◽  
Negative Effects ◽  
Learning Machine

With the rapid development of aeronautic and deep space exploration technologies, a large number of high-resolution asteroid spectral data have been gathered, which can provide diagnostic information for identifying different categories of asteroids as well as their surface composition and mineralogical properties. However, owing to the noise of observation systems and the ever-changing external observation environments, the observed asteroid spectral data always contain noise and outliers exhibiting indivisible pattern characteristics, which will bring great challenges to the precise classification of asteroids. In order to alleviate the problem and to improve the separability and classification accuracy for different kinds of asteroids, this paper presents a novel Neighboring Discriminant Component Analysis (NDCA) model for asteroid spectrum feature learning. The key motivation is to transform the asteroid spectral data from the observation space into a feature subspace wherein the negative effects of outliers and noise will be minimized while the key category-related valuable knowledge in asteroid spectral data can be well explored. The effectiveness of the proposed NDCA model is verified on real-world asteroid reflectance spectra measured over the wavelength range from 0.45 to 2.45 μm, and promising classification performance has been achieved by the NDCA model in combination with different classifier models, such as the nearest neighbor (NN), support vector machine (SVM) and extreme learning machine (ELM).

scholarly journals A New Approach to Fall Detection Based on Improved Dual Parallel Channels Convolutional Neural Network

Sensors ◽  
2019 ◽  
Vol 19 (12) ◽  
pp. 2814 ◽  
Author(s):  
Xiaoguang Liu ◽  
Huanliang Li ◽  
Cunguang Lou ◽  
Tie Liang ◽  
Xiuling Liu ◽  
...  
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Nearest Neighbor ◽  
Fall Detection ◽  
Classification Performance ◽  
Daily Activities ◽  
Support Vector ◽  
K Nearest Neighbor ◽  
Linear Discriminant ◽  
Parallel Channels

Falls are the major cause of fatal and non-fatal injury among people aged more than 65 years. Due to the grave consequences of the occurrence of falls, it is necessary to conduct thorough research on falls. This paper presents a method for the study of fall detection using surface electromyography (sEMG) based on an improved dual parallel channels convolutional neural network (IDPC-CNN). The proposed IDPC-CNN model is designed to identify falls from daily activities using the spectral features of sEMG. Firstly, the classification accuracy of time domain features and spectrograms are compared using linear discriminant analysis (LDA), k-nearest neighbor (KNN) and support vector machine (SVM). Results show that spectrograms provide a richer way to extract pattern information and better classification performance. Therefore, the spectrogram features of sEMG are selected as the input of IDPC-CNN to distinguish between daily activities and falls. Finally, The IDPC-CNN is compared with SVM and three different structure CNNs under the same conditions. Experimental results show that the proposed IDPC-CNN achieves 92.55% accuracy, 95.71% sensitivity and 91.7% specificity. Overall, The IDPC-CNN is more effective than the comparison in accuracy, efficiency, training and generalization.

Comparative analysis of breast cancer detection in mammograms and thermograms

2015 ◽  
Vol 60 (1) ◽  
Author(s):  
Marina Milosevic ◽  
Dragan Jankovic ◽  
Aleksandar Peulic
Keyword(s):  
Nearest Neighbor ◽  
Region Of Interest ◽  
Texture Features ◽  
Classification Performance ◽  
Support Vector ◽  
K Nearest Neighbor ◽  
Characteristic Analysis ◽  
Analysis Society ◽  
Fold Cross Validation ◽  
Neighbor Classifier

AbstractIn this paper, we present a system based on feature extraction techniques for detecting abnormal patterns in digital mammograms and thermograms. A comparative study of texture-analysis methods is performed for three image groups: mammograms from the Mammographic Image Analysis Society mammographic database; digital mammograms from the local database; and thermography images of the breast. Also, we present a procedure for the automatic separation of the breast region from the mammograms. Computed features based on gray-level co-occurrence matrices are used to evaluate the effectiveness of textural information possessed by mass regions. A total of 20 texture features are extracted from the region of interest. The ability of feature set in differentiating abnormal from normal tissue is investigated using a support vector machine classifier, Naive Bayes classifier and K-Nearest Neighbor classifier. To evaluate the classification performance, five-fold cross-validation method and receiver operating characteristic analysis was performed.

Spectral Data Modeling Based on Feature Extraction and Extreme Support Vector Regression

2011 ◽  
Vol 128-129 ◽  
pp. 297-300
Author(s):  
Shao Wei Liu ◽  
Dong Yan ◽  
Zhi Hua Liu ◽  
Jian Tang
Keyword(s):  
Feature Extraction ◽  
Support Vector Regression ◽  
Spectral Data ◽  
Latent Variables ◽  
Near Infrared ◽  
Support Vector ◽  
Feature Extraction Method ◽  
Near Infrared Spectra ◽  
Learning Machine ◽  
Elm Kernel

Spectral data such as near-infrared spectrum and frequency spectrum can simply the modeling of the difficulty-to-measured parameters. A novel modeling approach combined the feature extraction with extreme support vector regression (ESVR) is proposed. The latent variables space based feature extraction method can successfully complete the dimension reduction and independent variable extraction. The novel proposed ESVR leaning algorithm is realized by using extreme learning machine (ELM) kernel as SVR kernel, which is used to construct final models with better generalization. The experimental results based on the orange juice near-infrared spectra demonstrate that the proposed approach has better generalization performance and prediction accuracy.

scholarly journals NIM: A Node Influence Based Method for Cancer Classification

2014 ◽  
Vol 2014 ◽  
pp. 1-10
Author(s):  
Yiwen Wang ◽  
Min Yao ◽  
Jianhua Yang
Keyword(s):  
Gene Expression ◽  
Nearest Neighbor ◽  
Lymphoblastic Leukemia ◽  
Rapid Development ◽  
Main Idea ◽  
Great Majority ◽  
Test Sample ◽  
Cancer Classification ◽  
Support Vector ◽  
Similarity Matrix

The classification of different cancer types owns great significance in the medical field. However, the great majority of existing cancer classification methods are clinical-based and have relatively weak diagnostic ability. With the rapid development of gene expression technology, it is able to classify different kinds of cancers using DNA microarray. Our main idea is to confront the problem of cancer classification using gene expression data from a graph-based view. Based on a new node influence model we proposed, this paper presents a novel high accuracy method for cancer classification, which is composed of four parts: the first is to calculate the similarity matrix of all samples, the second is to compute the node influence of training samples, the third is to obtain the similarity between every test sample and each class using weighted sum of node influence and similarity matrix, and the last is to classify each test sample based on its similarity between every class. The data sets used in our experiments are breast cancer, central nervous system, colon tumor, prostate cancer, acute lymphoblastic leukemia, and lung cancer. experimental results showed that our node influence based method (NIM) is more efficient and robust than the support vector machine,K-nearest neighbor, C4.5, naive Bayes, and CART.

scholarly journals Optimized Kernel Extreme Learning Machine for Myoelectric Pattern Recognition

2018 ◽  
Vol 8 (1) ◽  
pp. 483
Author(s):  
Khairul Anam ◽  
Adel Al-Jumaily
Keyword(s):  
Pattern Recognition ◽  
Extreme Learning Machine ◽  
Healthy Subjects ◽  
Nearest Neighbor ◽  
Experimental Results ◽  
Support Vector ◽  
K Nearest Neighbor ◽  
Linear Discriminant ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

Myoelectric pattern recognition (MPR) is used to detect user’s intention to achieve a smooth interaction between human and machine. The performance of MPR is influenced by the features extracted and the classifier employed. A kernel extreme learning machine especially radial basis function extreme learning machine (RBF-ELM) has emerged as one of the potential classifiers for MPR. However, RBF-ELM should be optimized to work efficiently. This paper proposed an optimization of RBF-ELM parameters using hybridization of particle swarm optimization (PSO) and a wavelet function. These proposed systems are employed to classify finger movements on the amputees and able-bodied subjects using electromyography signals. The experimental results show that the accuracy of the optimized RBF-ELM is 95.71% and 94.27% in the healthy subjects and the amputees, respectively. Meanwhile, the optimization using PSO only attained the average accuracy of 95.53 %, and 92.55 %, on the healthy subjects and the amputees, respectively. The experimental results also show that SW-RBF-ELM achieved the accuracy that is better than other well-known classifiers such as support vector machine (SVM), linear discriminant analysis (LDA) and k-nearest neighbor (kNN).

scholarly journals A Self-Learning Fault Diagnosis Strategy Based on Multi-Model Fusion

Information ◽  
2019 ◽  
Vol 10 (3) ◽  
pp. 116 ◽  
Author(s):  
Tianzhen Wang ◽  
Jingjing Dong ◽  
Tao Xie ◽  
Demba Diallo ◽  
Mohamed Benbouzid
Keyword(s):  
Fault Detection ◽  
Principal Component ◽  
Component Analysis ◽  
Kernel Principal Component Analysis ◽  
Support Vector ◽  
Model Fusion ◽  
Vibration Data ◽  
Kernel Independent Component Analysis ◽  
Domain Description ◽  
Learning Machine

This paper presents an approach to detect and classify the faults in complex systems with small amounts of available data history. The methodology is based on the model fusion for fault detection and classification. Moreover, the database is enriched with additional samples if they are correctly classified. For the fault detection, the kernel principal component analysis (KPCA), kernel independent component analysis (KICA) and support vector domain description (SVDD) were used and combined with a fusion operator. For the classification, extreme learning machine (ELM) was used with different activation functions combined with an average fusion function. The performance of the methodology was evaluated with a set of experimental vibration data collected from a test-to-failure bearing test rig. The results show the effectiveness of the proposed approach compared to conventional methods. The fault detection was achieved with a false alarm rate of 2.29% and a null missing alarm rate. The data is also successfully classified with a rate of 99.17%.

scholarly journals Performance Research on Medical Data Classification using Traditional and Soft Computing Techniques

2019 ◽  
Vol 8 (2S3) ◽  
pp. 990-995
Keyword(s):  
Data Mining ◽  
Soft Computing ◽  
Nearest Neighbor ◽  
Classification Performance ◽  
Medical Data ◽  
Support Vector ◽  
Classification Algorithms ◽  
K Nearest Neighbor ◽  
Classification Techniques ◽  
Soft Computing Techniques

The world today has made giant leaps in the field of Medicine. There is tremendous amount of researches being carried out in this field leading to new discoveries that is making a heavy impact on the mankind. Data being generated in this field is increasing enormously. A need has arisen to analyze these data in order to find out the meaningful and relevant hidden patterns. These patterns can be used for clinical diagnosis. Data mining is an efficient approach in discovering these patterns. Among the many data mining techniques that exists, this paper aims at analyzing the medical data using various Classification techniques. The classification techniques used in this study include k-Nearest neighbor (kNN), Decision Tree, Naive Bayes which are hard computing algorithms, whereas the soft computing algorithms used in this study include Support Vector Machine (SVM), Artificial Neural Networks (ANN) and Fuzzy k-Means clustering. We have applied these algorithms to three kinds of datasets that are Breast Cancer Wisconsin, Haberman Data and Contraceptive Method Choice dataset. Our results show that soft computing based classification algorithms better classifications than the traditional classification algorithms in terms of various classification performance measures

A New Algorithm for Analysis of MiRNA Expression Profiles—SVM-RFE-FKNN

2021 ◽  
Author(s):  
Duan Mei ◽  
Qiang Liu
Keyword(s):  
Mirna Expression ◽  
Nearest Neighbor ◽  
Expression Profiles ◽  
Binary Classification ◽  
Characteristic Curve ◽  
Classification Performance ◽  
Recursive Feature Elimination ◽  
Support Vector ◽  
K Nearest Neighbor ◽  
Mirna Expression Profiles

Based on MicroRNA (miRNA) expression profiles, this article proposes a new algorithm—SVM-RFE-FKNN, which combines the support vector machine-recursive feature elimination (SVM-RFE) algorithm and the fuzzy K -nearest neighbor (FKNN) algorithm, to realize binary classification of tumors. First, the SVM-RFE algorithm was used to select features from the miRNA expression profile dataset to constitute feature subsets and to determine the maximum number of support vectors. Next, this maximum number was regarded as the upper limit of the parameter K in the FKNN algorithm that was then used to classify the samples to be tested. Finally, the leave-one-out cross-validation method was adopted to assess the classification performance of the proposed algorithm. Through experiments, our proposed algorithm was compared with other twelve classification methods, and the result shows that our algorithm had better classification performance. Specifically, with only a few miRNA biomarkers, the proposed algorithm could reach an accuracy of 99.46% and an area under the receiver operating characteristic curve (AUC) of 0.9874.

Comparison of the Hybrid Credit Scoring Models Based on Various Classifiers

2012 ◽  
pp. 220-239
Author(s):  
Fei-Long Chen ◽  
Feng-Chia Li
Keyword(s):  
Nearest Neighbor ◽  
Credit Scoring ◽  
Back Propagation ◽  
Support Vector ◽  
Data Sets ◽  
K Nearest Neighbor ◽  
Hybrid Features ◽  
Credit Data ◽  
Learning Machine ◽  
Propagation Network

Credit scoring is an important topic for businesses and socio-economic establishments collecting huge amounts of data, with the intention of making the wrong decision obsolete. In this paper, the authors propose four approaches that combine four well-known classifiers, such as K-Nearest Neighbor (KNN), Support Vector Machine (SVM), Back-Propagation Network (BPN) and Extreme Learning Machine (ELM). These classifiers are used to find a suitable hybrid classifier combination featuring selection that retains sufficient information for classification purposes. In this regard, different credit scoring combinations are constructed by selecting features with four approaches and classifiers than would otherwise be chosen. Two credit data sets from the University of California, Irvine (UCI), are chosen to evaluate the accuracy of the various hybrid features selection models. In this paper, the procedures that are part of the proposed approaches are described and then evaluated for their performances.

A Novel Sparse Representation and Softmax Method for Human Activity Identification in Healthcare Systems

2020 ◽  
Vol 10 (7) ◽  
pp. 1724-1733
Author(s):  
Youwei Yuan ◽  
Wenpeng Tao ◽  
Jintao Zhang ◽  
Meilian Zheng ◽  
Yao Yao ◽  
...  
Keyword(s):  
Sparse Representation ◽  
Human Activity ◽  
Nearest Neighbor ◽  
Feature Space ◽  
Healthcare Systems ◽  
Classification Performance ◽  
Identification Accuracy ◽  
Sensor Data ◽  
Support Vector ◽  
Research Attention

Human activity identification has been attracting extensive research attention due to its prominent applications in healthcare systems such as healthcare monitoring and rehabilitation process. Traditional methods are greatly dependent on hand-crafted feature extraction, hampering their generalization performance. In this research, a novel sparse representation and softmax (SRS) method is presented for human activity identification to reduce the computation complexity of the task and improve the accuracy of classification. The multi-class classifier based on the softmax function is firstly introduced to improve sensor data classification performance. Sparse representation technology is then applied in our work to extract human activity features from sensor data. The output of the classifier model, taking raw sensor data after transforming into a high-dimensional feature space as input, provides a normalization of the probability distribution of activity categories, thereby ensuring accuracy and efficiency under diverse human activities. Experiments on a collection of raw sensor data from wireless sensor networks demonstrate the identification accuracy of our approach compared with nearest neighbor, naive Bayesian classifier, and support vector machine methods. The F1-score of the proposed method is respectively 14.1%, 19.6%, and 6.8% higher than the approaches mentioned above, indicating the effectiveness of SRS.

Sign in / Sign up

Export Citation Format

Share Document