scholarly journals Spatiotemporal Patterns in Data Availability of the Sentinel-5P NO2 Product over Urban Areas in Norway

2021 ◽  
Vol 13 (11) ◽  
pp. 2095
Author(s):  
Philipp Schneider ◽  
Paul D. Hamer ◽  
Arve Kylling ◽  
Shobitha Shetty ◽  
Kerstin Stebel

Due to its comparatively high spatial resolution and its daily repeat frequency, the tropospheric nitrogen dioxide product provided by the TROPOspheric Monitoring Instrument (TROPOMI) onboard the Sentinel-5 Precursor platform has attracted significant attention for its potential for urban-scale monitoring of air quality. However, the exploitation of such data in, for example, operational assimilation of local-scale dispersion models is often complicated by substantial data gaps due to cloud cover or other retrieval limitations. These challenges are particularly prominent in high-latitude regions where significant cloud cover and high solar zenith angles are often prevalent. Using the example of Norway as a representative case for a high-latitude region, we here evaluate the spatiotemporal patterns in the availability of valid data from the operational TROPOMI tropospheric nitrogen dioxide (NO2) product over five urban areas (Oslo, Bergen, Trondheim, Stavanger, and Kristiansand) and a 2.5 year period from July 2018 through November 2020. Our results indicate that even for relatively clean environments such as small Norwegian cities, distinct spatial patterns of tropospheric NO2 are visible in long-term average datasets from TROPOMI. However, the availability of valid data on a daily level is limited by both cloud cover and solar zenith angle (during the winter months), causing the fraction of valid retrievals in each study site to vary from 20% to 50% on average. A temporal analysis shows that for our study sites and the selected period, the fraction of valid pixels in each domain shows a clear seasonal cycle reaching a maximum of 50% to 75% in the summer months and 0% to 20% in winter. The seasonal cycle in data availability shows the inverse behavior of NO2 pollution in Norway, which typically has its peak in the winter months. However, outside of the mid-winter period we find the TROPOMI NO2 product to provide sufficient data availability for detailed mapping and monitoring of NO2 pollution in the major urban areas in Norway and see potential for the use of the data in local-scale data assimilation and emission inversions applications.

2020 ◽  
Vol 12 (19) ◽  
pp. 3141
Author(s):  
Ian Olthof ◽  
Nicolas Svacina

The increasing frequency of flooding worldwide has driven research to improve near real-time flood mapping from remote-sensing data. Improved automation and processing speed to map both open water and vegetated area flooding have resulted from these research efforts. Despite these achievements, flood mapping in urban areas where a significant number of overall impacts are felt remains a challenge. Near real-time data availability, shadowing caused by manmade infrastructure, spatial resolution, and cloud cover inhibiting optical transmission, are all factors that complicate detailed urban flood mapping needed to inform response efforts. This paper uses numerous data sources collected during two major flood events that impacted the same region of Eastern Canada in 2017 and 2019 to test different urban flood mapping approaches presented as case studies in three separate urban boroughs. Cloud-free high-resolution 3 m PlanetLab optical data acquired near peak-flood in 2019 were used to generate a maximum flood extent product for that year. Approaches using new Lidar Digital Elevation Models (DEM)s and water height estimated from nineteen RADARSAT-2 flood maps, point-based flood perimeter observations from citizen geographic information, and simulated traffic camera or other urban sensor network data were tested and verified using independent data. Coherent change detection (CCD) using multi-temporal Interferometric Wide (IW) Sentinel-1 data was also tested. Results indicate that while clear-sky high-resolution optical imagery represents the current gold standard, its availability is not guaranteed due to timely coverage and cloud cover. Water height estimated from 8 to 12.5 m resolution RADARSAT-2 flood perimeters were not sufficiently accurate to flood adjacent urban areas using a Lidar DEM in near real-time, but all nineteen scenes combined captured boroughs that flooded at least once in both flood years. CCD identified flooded boroughs and roughly captured their flood extents, but lacked timeliness and sufficient detail to inform street-level decision-making in near real-time. Point-based flood perimeter observation, whether from in-situ sensors or high-resolution optical satellites combined with Lidar DEMs, can generate accurate full flood extents under certain conditions. Observed point-based flood perimeters on manmade features with low topographic variation produced the most accurate flood extents due to reliable water height estimation from these points.


2021 ◽  
Vol 13 (10) ◽  
pp. 5747
Author(s):  
Dehuan Li ◽  
Wei Sun ◽  
Fan Xia ◽  
Yixuan Yang ◽  
Yujing Xie

Biodiversity maintenance is a crucial ecosystem service. Due to time limits and data availability, assessing biodiversity using indicators or models has become a hot topic in recent decades. However, whether some proposed indicators can explain biodiversity well at the local scale is still unclear. This study attempted to test whether the habitat quality index (HQI) as measured using the integrated valuation of ecosystem services and trade-offs (InVEST) model could explain variations in bird diversity in New Jiangwan Town, a rapidly urbanized region of Shanghai, China. The relationships from 2002 to 2013 among HQI and the two diversity indices, species richness and species abundance, were analyzed using Fisher’s exact test and gray correlation analysis. No significant association was found. Habitat connectivity was then integrated to develop a new combined indicator of habitat quality and connectivity index (HQCI). The associations between HQCI and the two diversity indices were improved significantly. The results indicated that connectivity may be an important factor explaining the diversity of certain species at a local scale. More empirical studies should be conducted to provide scientific evidence relating habitat quality to biodiversity.


2021 ◽  
Vol 13 (8) ◽  
pp. 1563
Author(s):  
Yuanyuan Tao ◽  
Qianxin Wang

The accurate identification of PLES changes and the discovery of their evolution characteristics is a key issue to improve the ability of the sustainable development for resource-based urban areas. However, the current methods are unsuitable for the long-term and large-scale PLES investigation. In this study, a modified method of PLES recognition is proposed based on the remote sensing image classification and land function evaluation technology. A multi-dimensional index system is constructed, which can provide a comprehensive evaluation for PLES evolution characteristics. For validation of the proposed methods, the remote sensing image, geographic information, and socio-economic data of five resource-based urbans (Zululand in South Africa, Xuzhou in China, Lota in Chile, Surf Coast in Australia, and Ruhr in Germany) from 1975 to 2020 are collected and tested. The results show that the data availability and calculation efficiency are significantly improved by the proposed method, and the recognition precision is better than 87% (Kappa coefficient). Furthermore, the PLES evolution characteristics show obvious differences at the different urban development stages. The expansions of production, living, and ecological space are fastest at the mining, the initial, and the middle ecological restoration stages, respectively. However, the expansion of living space is always increasing at any stage, and the disorder expansion of living space has led to the decrease of integration of production and ecological spaces. Therefore, the active polices should be formulated to guide the transformation of the living space expansion from jumping-type and spreading-type to filling-type, and the renovation of abandoned industrial and mining lands should be encouraged.


1998 ◽  
Vol 16 (3) ◽  
pp. 331-341 ◽  
Author(s):  
J. Massons ◽  
D. Domingo ◽  
J. Lorente

Abstract. A cloud-detection method was used to retrieve cloudy pixels from Meteosat images. High spatial resolution (one pixel), monthly averaged cloud-cover distribution was obtained for a 1-year period. The seasonal cycle of cloud amount was analyzed. Cloud parameters obtained include the total cloud amount and the percentage of occurrence of clouds at three altitudes. Hourly variations of cloud cover are also analyzed. Cloud properties determined are coherent with those obtained in previous studies.Key words. Cloud cover · Meteosat


2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Shaibal Mukerjee ◽  
Luther Smith ◽  
Lucas Neas ◽  
Gary Norris

Spatial analysis studies have included the application of land use regression models (LURs) for health and air quality assessments. Recent LUR studies have collected nitrogen dioxide (NO2) and volatile organic compounds (VOCs) using passive samplers at urban air monitoring networks in El Paso and Dallas, TX, Detroit, MI, and Cleveland, OH to assess spatial variability and source influences. LURs were successfully developed to estimate pollutant concentrations throughout the study areas. Comparisons of development and predictive capabilities of LURs from these four cities are presented to address this issue of uniform application of LURs across study areas. Traffic and other urban variables were important predictors in the LURs although city-specific influences (such as border crossings) were also important. In addition, transferability of variables or LURs from one city to another may be problematic due to intercity differences and data availability or comparability. Thus, developing common predictors in future LURs may be difficult.


2021 ◽  
Vol 21 (9) ◽  
pp. 7373-7394
Author(s):  
Jérôme Barré ◽  
Hervé Petetin ◽  
Augustin Colette ◽  
Marc Guevara ◽  
Vincent-Henri Peuch ◽  
...  

Abstract. This study provides a comprehensive assessment of NO2 changes across the main European urban areas induced by COVID-19 lockdowns using satellite retrievals from the Tropospheric Monitoring Instrument (TROPOMI) onboard the Sentinel-5p satellite, surface site measurements, and simulations from the Copernicus Atmosphere Monitoring Service (CAMS) regional ensemble of air quality models. Some recent TROPOMI-based estimates of changes in atmospheric NO2 concentrations have neglected the influence of weather variability between the reference and lockdown periods. Here we provide weather-normalized estimates based on a machine learning method (gradient boosting) along with an assessment of the biases that can be expected from methods that omit the influence of weather. We also compare the weather-normalized satellite-estimated NO2 column changes with weather-normalized surface NO2 concentration changes and the CAMS regional ensemble, composed of 11 models, using recently published estimates of emission reductions induced by the lockdown. All estimates show similar NO2 reductions. Locations where the lockdown measures were stricter show stronger reductions, and, conversely, locations where softer measures were implemented show milder reductions in NO2 pollution levels. Average reduction estimates based on either satellite observations (−23 %), surface stations (−43 %), or models (−32 %) are presented, showing the importance of vertical sampling but also the horizontal representativeness. Surface station estimates are significantly changed when sampled to the TROPOMI overpasses (−37 %), pointing out the importance of the variability in time of such estimates. Observation-based machine learning estimates show a stronger temporal variability than model-based estimates.


2011 ◽  
Vol 50 (9) ◽  
pp. 1872-1883 ◽  
Author(s):  
Winston T. L. Chow ◽  
Bohumil M. Svoma

AbstractUrbanization affects near-surface climates by increasing city temperatures relative to rural temperatures [i.e., the urban heat island (UHI) effect]. This effect is usually measured as the relative temperature difference between urban areas and a rural location. Use of this measure is potentially problematic, however, mainly because of unclear “rural” definitions across different cities. An alternative metric is proposed—surface temperature cooling/warming rates—that directly measures how variations in land-use and land cover (LULC) affect temperatures for a specific urban area. In this study, the impact of local-scale (<1 km2), historical LULC change was examined on near-surface nocturnal meteorological station temperatures sited within metropolitan Phoenix, Arizona, for 1) urban versus rural areas, 2) areas that underwent rural-to-urban transition over a 20-yr period, and 3) different seasons. Temperature data were analyzed during ideal synoptic conditions of clear and calm weather that do not inhibit surface cooling and that also qualified with respect to measured near-surface wind impacts. Results indicated that 1) urban areas generally observed lower cooling-rate magnitudes than did rural areas, 2) urbanization significantly reduced cooling rates over time, and 3) mean cooling-rate magnitudes were typically larger in summer than in winter. Significant variations in mean nocturnal urban wind speeds were also observed over time, suggesting a possible UHI-induced circulation system that may have influenced local-scale station cooling rates.


2010 ◽  
Vol 1 (2) ◽  
pp. 55-70 ◽  
Author(s):  
Hyun Joong Kim

Rapidly growing urban areas tend to reveal distinctive spatial and temporal variations of land use/land cover in a locally urbanized environment. In this article, the author analyzes urban growth phenomena at a local scale by employing Geographic Information Systems, remotely sensed image data from 1984, 1994, and 2004, and landscape shape index. Since spatial patterns of land use/land cover changes in small urban areas are not fully examined by the current GIS-based modeling studies or simulation applications, the major objective of this research is to identify and examine the spatial and temporal dynamics of land use changes of urban growth at a local scale. Analytical results demonstrate that sizes, locations, and shapes of new developments are spatio-temporally associated with their landscape variations and major transportation arteries. The key findings from this study contribute to GIS-based urban growth modeling studies and urban planning practices for local communities.


2020 ◽  
Vol 12 (12) ◽  
pp. 2007
Author(s):  
Kathryn Sheffield ◽  
Tony Dugdale

Weeds can impact many ecosystems, including natural, urban and agricultural environments. This paper discusses core weed biosecurity program concepts and considerations for urban and peri-urban areas from a remote sensing perspective and reviews the contribution of remote sensing to weed detection and management in these environments. Urban and peri-urban landscapes are typically heterogenous ecosystems with a variety of vectors for invasive weed species introduction and dispersal. This diversity requires agile systems to support landscape-scale detection and monitoring, while accommodating more site-specific management and eradication goals. The integration of remote sensing technologies within biosecurity programs presents an opportunity to improve weed detection rates, the timeliness of surveillance, distribution and monitoring data availability, and the cost-effectiveness of surveillance and eradication efforts. A framework (the Weed Aerial Surveillance Program) is presented to support a structured approach to integrating multiple remote sensing technologies into urban and peri-urban weed biosecurity and invasive species management efforts. It is designed to support the translation of remote sensing science into operational management outcomes and promote more effective use of remote sensing technologies within biosecurity programs.


Sign in / Sign up

Export Citation Format

Share Document