scholarly journals Satellite-Based Mapping of High-Resolution Ground-Level PM2.5 with VIIRS IP AOD in China through Spatially Neural Network Weighted Regression

2021 ◽  
Vol 13 (10) ◽  
pp. 1979
Author(s):  
Yijun Chen ◽  
Sensen Wu ◽  
Yuanyuan Wang ◽  
Feng Zhang ◽  
Renyi Liu ◽  
...  

Satellite-retrieved aerosol optical depth (AOD) data are extensively integrated with ground-level measurements to achieve spatially continuous fine particulate matters (PM2.5). Current satellite-based methods however face challenges in obtaining highly accurate and reasonable PM2.5 distributions due to the inability to handle both spatial non-stationarity and complex non-linearity in the PM2.5–AOD relationship. High-resolution (<1 km) PM2.5 products over the whole of China for fine exposure assessment and health research are also lacking. This study aimed to predict 750 m resolution ground-level PM2.5 in China with the high-resolution Visible Infrared Imaging Radiometer Suite (VIIRS) intermediate product (IP) AOD data using a newly developed geographically neural network weighted regression (GNNWR) model. The performance evaluations demonstrated that GNNWR achieved higher prediction accuracy than the widely used methods with cross-validation and predictive R2 of 0.86 and 0.85. Satellite-derived monthly 750 m resolution PM2.5 data in China were generated with robust prediction accuracy and almost complete coverage. The PM2.5 pollution was found to be greatly improved in 2018 in China with annual mean concentration of 31.07 ± 17.52 µg/m3. Nonetheless, fine-scale PM2.5 exposures at multiple administrative levels suggested that PM2.5 pollution in most urban areas needed further control, especially in southern Hebei Province. This work is the first to evaluate the potential of VIIRS IP AOD in modeling high-resolution PM2.5 over large-scale. The newly satellite-derived PM2.5 data with high spatial resolution and high prediction accuracy at the national scale are valuable to advance environmental and health researches in China.

2015 ◽  
Vol 6 (1) ◽  
pp. 61-81 ◽  
Author(s):  
L. Gerlitz ◽  
O. Conrad ◽  
J. Böhner

Abstract. The heterogeneity of precipitation rates in high-mountain regions is not sufficiently captured by state-of-the-art climate reanalysis products due to their limited spatial resolution. Thus there exists a large gap between the available data sets and the demands of climate impact studies. The presented approach aims to generate spatially high resolution precipitation fields for a target area in central Asia, covering the Tibetan Plateau and the adjacent mountain ranges and lowlands. Based on the assumption that observed local-scale precipitation amounts are triggered by varying large-scale atmospheric situations and modified by local-scale topographic characteristics, the statistical downscaling approach estimates local-scale precipitation rates as a function of large-scale atmospheric conditions, derived from the ERA-Interim reanalysis and high-resolution terrain parameters. Since the relationships of the predictor variables with local-scale observations are rather unknown and highly nonlinear, an artificial neural network (ANN) was utilized for the development of adequate transfer functions. Different ANN architectures were evaluated with regard to their predictive performance. The final downscaling model was used for the cellwise estimation of monthly precipitation sums, the number of rainy days and the maximum daily precipitation amount with a spatial resolution of 1 km2. The model was found to sufficiently capture the temporal and spatial variations in precipitation rates in the highly structured target area and allows for a detailed analysis of the precipitation distribution. A concluding sensitivity analysis of the ANN model reveals the effect of the atmospheric and topographic predictor variables on the precipitation estimations in the climatically diverse subregions.


Sensors ◽  
2020 ◽  
Vol 20 (7) ◽  
pp. 2030 ◽  
Author(s):  
Byeongkeun Kang ◽  
Yeejin Lee

Driving is a task that puts heavy demands on visual information, thereby the human visual system plays a critical role in making proper decisions for safe driving. Understanding a driver’s visual attention and relevant behavior information is a challenging but essential task in advanced driver-assistance systems (ADAS) and efficient autonomous vehicles (AV). Specifically, robust prediction of a driver’s attention from images could be a crucial key to assist intelligent vehicle systems where a self-driving car is required to move safely interacting with the surrounding environment. Thus, in this paper, we investigate a human driver’s visual behavior in terms of computer vision to estimate the driver’s attention locations in images. First, we show that feature representations at high resolution improves visual attention prediction accuracy and localization performance when being fused with features at low-resolution. To demonstrate this, we employ a deep convolutional neural network framework that learns and extracts feature representations at multiple resolutions. In particular, the network maintains the feature representation with the highest resolution at the original image resolution. Second, attention prediction tends to be biased toward centers of images when neural networks are trained using typical visual attention datasets. To avoid overfitting to the center-biased solution, the network is trained using diverse regions of images. Finally, the experimental results verify that our proposed framework improves the prediction accuracy of a driver’s attention locations.


2020 ◽  
Vol 12 (8) ◽  
pp. 1288 ◽  
Author(s):  
José R. G. Braga ◽  
Vinícius Peripato ◽  
Ricardo Dalagnol ◽  
Matheus P. Ferreira ◽  
Yuliya Tarabalka ◽  
...  

Tropical forests concentrate the largest diversity of species on the planet and play a key role in maintaining environmental processes. Due to the importance of those forests, there is growing interest in mapping their components and getting information at an individual tree level to conduct reliable satellite-based forest inventory for biomass and species distribution qualification. Individual tree crown information could be manually gathered from high resolution satellite images; however, to achieve this task at large-scale, an algorithm to identify and delineate each tree crown individually, with high accuracy, is a prerequisite. In this study, we propose the application of a convolutional neural network—Mask R-CNN algorithm—to perform the tree crown detection and delineation. The algorithm uses very high-resolution satellite images from tropical forests. The results obtained are promising—the R e c a l l , P r e c i s i o n , and F 1 score values obtained were were 0.81 , 0.91 , and 0.86 , respectively. In the study site, the total of tree crowns delineated was 59,062 . These results suggest that this algorithm can be used to assist the planning and conduction of forest inventories. As the algorithm is based on a Deep Learning approach, it can be systematically trained and used for other regions.


2018 ◽  
Vol 11 (1) ◽  
pp. 11 ◽  
Author(s):  
Weijia Li ◽  
Runmin Dong ◽  
Haohuan Fu ◽  
and Le Yu

Being an important economic crop that contributes 35% of the total consumption of vegetable oil, remote sensing-based quantitative detection of oil palm trees has long been a key research direction for both agriculture and environmental purposes. While existing methods already demonstrate satisfactory effectiveness for small regions, performing the detection for a large region with satisfactory accuracy is still challenging. In this study, we proposed a two-stage convolutional neural network (TS-CNN)-based oil palm detection method using high-resolution satellite images (i.e. Quickbird) in a large-scale study area of Malaysia. The TS-CNN consists of one CNN for land cover classification and one CNN for object classification. The two CNNs were trained and optimized independently based on 20,000 samples collected through human interpretation. For the large-scale oil palm detection for an area of 55 km2, we proposed an effective workflow that consists of an overlapping partitioning method for large-scale image division, a multi-scale sliding window method for oil palm coordinate prediction, and a minimum distance filter method for post-processing. Our proposed approach achieves a much higher average F1-score of 94.99% in our study area compared with existing oil palm detection methods (87.95%, 81.80%, 80.61%, and 78.35% for single-stage CNN, Support Vector Machine (SVM), Random Forest (RF), and Artificial Neural Network (ANN), respectively), and much fewer confusions with other vegetation and buildings in the whole image detection results.


Author(s):  
M. Maboudi ◽  
J. Amini ◽  
M. Hahn

Updated road databases are required for many purposes such as urban planning, disaster management, car navigation, route planning, traffic management and emergency handling. In the last decade, the improvement in spatial resolution of VHR civilian satellite sensors – as the main source of large scale mapping applications – was so considerable that GSD has become finer than size of common urban objects of interest such as building, trees and road parts. This technological advancement pushed the development of “Object-based Image Analysis (OBIA)” as an alternative to pixel-based image analysis methods. &lt;br&gt;&lt;br&gt; Segmentation as one of the main stages of OBIA provides the image objects on which most of the following processes will be applied. Therefore, the success of an OBIA approach is strongly affected by the segmentation quality. In this paper, we propose a purpose-dependent refinement strategy in order to group road segments in urban areas using maximal similarity based region merging. For investigations with the proposed method, we use high resolution images of some urban sites. The promising results suggest that the proposed approach is applicable in grouping of road segments in urban areas.


2014 ◽  
Vol 5 (2) ◽  
pp. 1275-1317 ◽  
Author(s):  
L. Gerlitz ◽  
O. Conrad ◽  
J. Böhner

Abstract. The heterogeneity of precipitation rates in high mountain regions is not sufficiently captured by state of the art climate reanalysis products due to their limited spatial resolution. Thus there exists a large gap between the available data sets and the demands of climate impact studies. The presented approach aims to generate spatially high resolution precipitation fields for a target area in Central Asia, covering the Tibetan Plateau, the adjacent mountain ranges and lowlands. Based on the assumption, that observed local scale precipitation amounts are triggered by varying large scale atmospheric situations and modified by local scale topographic characteristics, the statistical downscaling approach estimates local scale precipitation rates as a function of large scale atmospheric conditions, derived from the ERA-Interim reanalysis, and high resolution terrain parameters. Since the relationships of the predictor variables with local scale observations are rather unknown and highly non-linear, an Artificial Neural Network (ANN) was utilized for the development of adequate transfer functions. Different ANN-architectures were evaluated with regard to their predictive performance. The final downscaling model was used for the cellwise estimation of monthly precipitation sums, the number of rainy days and the maximum daily precipitation amount with a spatial resolution of 1 km2. The model was found to sufficiently capture the temporal and spatial variations of precipitation rates in the highly structured target area and allows a detailed analysis of the precipitation distribution. A concluding sensitivity analysis of the ANN model reveals the effect of the atmospheric and topographic predictor variables on the precipitation estimations in the climatically diverse subregions.


2020 ◽  
Author(s):  
Aidan C. Daly ◽  
Krzysztof J. Geras ◽  
Richard A. Bonneau

AbstractRegistration of histology images from multiple sources is a pressing problem in large-scale studies of spatial -omics data. Researchers often perform “common coordinate registration,” akin to segmentation, in which samples are partitioned based on tissue type to allow for quantitative comparison of similar regions across samples. Accuracy in such registration requires both high image resolution and global awareness, which mark a difficult balancing act for contemporary deep learning architectures. We present a novel convolutional neural network (CNN) architecture that combines (1) a local classification CNN that extracts features from image patches sampled sparsely across the tissue surface, and (2) a global segmentation CNN that operates on these extracted features. This hybrid network can be trained in an end-to-end manner, and we demonstrate its relative merits over competing approaches on a reference histology dataset as well as two published spatial transcriptomics datasets. We believe that this paradigm will greatly enhance our ability to process spatial -omics data, and has general purpose applications for the processing of high-resolution histology images on commercially available GPUs.


2021 ◽  
pp. 1-20
Author(s):  
Xavier Garcia-Teijeiro ◽  
Adrian Rodriguez-Herrera

Summary In this paper, we propose a methodology that combines finite-element modeling with neural networks in the numerical modeling of systems with behavior that involves a wide span of spatial scales. The method starts by constructing a high-resolution model of the subsurface, including its elastic mechanical properties and pore pressures. A second model is also constructed by scaling up mechanical properties and pressures into a coarse spatial resolution. Inexpensive finite-element solutions for stress are then obtained in the coarse model. These stress solutions aim at capturing regional trends and large-scale stress correlations. Finite-element solutions for stress are also obtained in high resolution, but only in a small subvolume of the 3D model. These stress solutions aim at estimating fine-grained details of the stress field introduced by the heterogeneity of rock properties at the fine scale. A neural network is then trained to infer the transformation rules that map stress solutions between different scales. The inputs to the training are pressure and mechanical properties in high and low resolutions. The output is the fine-scale stress computed in the subvolume of the high-resolutionmodel. Once trained, the neural network can be used to approximate a high-resolution stress field in the entire 3D volume using the coarse-scale solution and only providing high-resolution material properties and pressures. The results obtained indicate that when the coarse finite-element solutions are combined with the neural-network estimates, the results are within a 2 to 4% error of the results that would be computed with high-resolutionfinite-element models, but at a fraction of the cost in time and computational resources. This paper discusses the benefits and drawbacks of the method and illustrates its applicability by means of a worked example.


Sign in / Sign up

Export Citation Format

Share Document