scholarly journals Estimating Artificial Impervious Surface Percentage in Asia by Fusing Multi-Temporal MODIS and VIIRS Nighttime Light Data

2021 ◽  
Vol 13 (2) ◽  
pp. 212
Author(s):  
Fanggang Li ◽  
Erzhu Li ◽  
Ce Zhang ◽  
Alim Samat ◽  
Wei Liu ◽  
...  
Keyword(s):  
Random Forest ◽  
Prediction Model ◽  
Infrared Imaging ◽  
Impervious Surface ◽  
Impervious Surfaces ◽  
Large Area ◽  
Nighttime Light Data ◽  
Multi Temporal ◽  
Nighttime Light ◽  
Accuracy Of Prediction

Impervious surfaces have important effects on the natural environment, including promoting hydrological run-off and impeding evapotranspiration, as well as increasing the urban heat island effect. Obtaining accurate and timely information on the spatial distribution and dynamics of urban surfaces is, thus, of paramount importance for socio-economic analysis, urban planning, and environmental modeling and management. Previous studies have indicated that the fusion of multi-source remotely sensed imagery can increase the accuracy of prediction for impervious surface information across large areas. However, the majority of them are limited to the use of specific data sources to construct a few features with which it can be challenging to characterize adequately the variation in impervious surfaces over large areas. Thus, impervious surface maps are often presented with high uncertainty. In response to this problem, we proposed the use of multi-temporal MODIS and Visible Infrared Imaging Radiometer Suite (VIIRS) nighttime light data to construct a more general and robust feature set for large-area artificial impervious surface percentage (AISP) prediction. Three fusion methods were proposed for application to multi-temporal MODIS surface reflectance product (MOD09A1) and Visible Infrared Imaging Radiometer Suite (NPP-VIIRS) Day/Night Band (DNB) data to construct three different types of features: spectral features, index features (band calculations), and fusion features. These features were then used as variables in a random-forest-based AISP prediction model. The model was fitted to China and then applied to predict AISP across Asia. Fifteen typical cities from different regions of Asia were selected to assess the accuracy of the prediction model. The use of multi-temporal MODIS and VIIRS DNB data was found to significantly increase the accuracy of prediction for large-area AISP. The feature set constructed in this research was demonstrated to be suitable for large-area AISP prediction, and the random forest model based on optimization of the selected features achieved the highest accuracy, amongst benchmarks, with testing R2 of 0.690, and testing RMSE of 0.044 in 2018, respectively. In addition, to further test the performance of the proposed method, three existing impervious products (GAIA, HBASE, and NUACI) were used to compare quantitatively. The results showed that the predicted AISP achieved superior performance in comparison with others in some areas (e.g., arid areas and cloudy areas).

scholarly journals Development of a global 30-m impervious surface map using multi-source and multi-temporal remote sensing datasets with the Google Earth Engine platform

2020 ◽  
Author(s):  
Xiao Zhang ◽  
Liangyun Liu ◽  
Changshan Wu ◽  
Xidong Chen ◽  
Yuan Gao ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Random Forest ◽  
Human Activity ◽  
Impervious Surface ◽  
Google Earth ◽  
Impervious Surfaces ◽  
Sar Images ◽  
Training Samples ◽  
Multi Temporal ◽  
Google Earth Engine

Abstract. The amount of impervious surface is an important indicator in the monitoring of the intensity of human activity and environmental change. The use of remote sensing techniques is the only means of accurately carrying out global mapping of impervious surfaces covering large areas. Optical imagery can capture surface reflectance characteristics, while synthetic aperture radar (SAR) images can be used to provide information on the structure and dielectric properties of surface materials. In addition, night-time light (NTL) imagery can detect the intensity of human activity and thus provide important a priori probabilities of the occurrence of impervious surfaces. In this study, we aimed to generate an accurate global impervious surface map at a resolution of 30-m for 2015 by combining Landsat-8 OLI optical images, Sentinel-1 SAR images and VIIRS NTL images based on the Google Earth Engine (GEE) platform. First, the global impervious and non-impervious training samples were automatically derived by combining the GlobeLand30 land-cover product with VIIRS NTL and MODIS enhanced vegetation index (EVI) imagery. Then, based on global training samples and multi-source and multi-temporal imagery, a random forest classifier was trained and used to generate corresponding impervious surface maps for each 5°×5° cell of a geographical grid. Finally, a global impervious surface map, produced by mosaicking numerous 5°×5° regional maps, was validated by interpretation samples and then compared with three existing impervious products (GlobeLand30, FROM_GLC and NUACI). The results indicated that the global impervious surface map produced using the proposed multi-source, multi-temporal random forest classification (MSMT_RF) method was the most accurate of the maps, having an overall accuracy of 96.6 % and kappa coefficient of 0.903 as against 92.5 % and 0.769 for FROM_GLC, 91.1 % and 0.717 for GlobeLand30, and 87.43 % and 0.585 for NUACI. Therefore, it is concluded that a global 30-m impervious surface map can accurately and efficiently be generated by the proposed MSMT_RF method based on the GEE platform. The global impervious surface map generated in this paper are available at https://doi.org/10.5281/zenodo.3505079 (Zhang et al., 2019).

scholarly journals Identification of Shrinkage and Growth Patterns of a Shrinking City in China Based on Nighttime Light Data: A Case Study of Yichun

2019 ◽  
Vol 11 (24) ◽  
pp. 6906 ◽  
Author(s):  
Ying Zhou ◽  
Chenggu Li ◽  
Zuopeng Ma ◽  
Shuju Hu ◽  
Jing Zhang ◽  
...  
Keyword(s):  
Satellite Images ◽  
Infrared Imaging ◽  
Demographic Data ◽  
Growth Patterns ◽  
Nighttime Light Data ◽  
Nighttime Light ◽  
Urban Science ◽  
New Perspective ◽  
Shrinking City

Urban shrinkage has become a topic of major concern to scholars of geography and urban science. However, the methods of identifying urban shrinkage and growth have mostly focused on traditional statistical methods, and studies based on nighttime light (NTL) data are rare. Here, we use the NTL data for 56 months from 2012 to 2019 obtained by the Visible Infrared Imaging Radiometer Suite (VIIRS) on board the Suomi National Polar Orbiting Partnership (NPP) to identify the shrinkage and growth patterns of Yichun in China, by calculating the slope of the NTL radiance value after denoising. At the same time, by combining high-resolution Google satellite images and traditional demographic data, we analyzed the shrinkage characteristics of Yichun. The results of the study confirmed the characteristics of partial shrinkage in China’s shrinking cities. In addition, the use of NPP-VIIRS NTL data was able to more accurately identify the urban shrinkage and growth patterns, and may also be seen to present a more objective picture of reality, thus providing a new perspective for studies of urban shrinkage.

scholarly journals Does China’s Urban Development Satisfy Zipf’s Law? A Multiscale Perspective from the NPP-VIIRS Nighttime Light Data

2020 ◽  
Vol 17 (4) ◽  
pp. 1460 ◽  
Author(s):  
Yizhen Wu ◽  
Mingyue Jiang ◽  
Zhijian Chang ◽  
Yuanqing Li ◽  
Kaifang Shi
Keyword(s):  
Urban Development ◽  
Infrared Imaging ◽  
Multiple Scales ◽  
Decision Makers ◽  
Zipf’S Law ◽  
Zipf's Law ◽  
Nighttime Light Data ◽  
Nighttime Light ◽  
Zipf Law ◽  
The Ideal

Currently, whether the urban development in China satisfies Zipf’s law across different scales is still unclear. Thus, this study attempted to explore whether China’s urban development satisfies Zipf’s law across different scales from the National Polar-Orbiting Partnership’s Visible Infrared Imaging Radiometer Suite (NPP-VIIRS) nighttime light data. First, the NPP-VIIRS data were corrected. Then, based on the Zipf law model, the corrected NPP-VIIRS data were used to evaluate China’s urban development at multiple scales. The results showed that the corrected NPP-VIIRS data could effectively reflect the state of urban development in China. Additionally, the Zipf index (q) values, which could express the degree of urban development, decreased from 2012 to 2018 overall in all provinces, prefectures, and counties. Since the value of q was relatively close to 1 with an R2 value > 0.70, the development of the provinces and prefectures was close to the ideal Zipf’s law state. In all counties, q > 1 with an R2 value > 0.70, which showed that the primate county had a relatively stronger monopoly capacity. When the value of q < 1 with a continuous declination in the top 2000 counties, the top 250 prefectures, and the top 20 provinces in equilibrium, there was little difference in the scale of development at the multiscale level with an R2 > 0.90. The results enriched our understanding of urban development in terms of Zipf’s law and had valuable implications for relevant decision-makers and stakeholders.

scholarly journals Spatiotemporal Variations of City-Level Carbon Emissions in China during 2000–2017 Using Nighttime Light Data

2020 ◽  
Vol 12 (18) ◽  
pp. 2916
Author(s):  
Yu Sun ◽  
Sheng Zheng ◽  
Yuzhe Wu ◽  
Uwe Schlink ◽  
Ramesh P. Singh
Keyword(s):  
Carbon Emissions ◽  
Infrared Imaging ◽  
Yangtze River Delta ◽  
Chinese Government ◽  
Low Carbon ◽  
Spatiotemporal Variations ◽  
Nighttime Light Data ◽  
Low Emission ◽  
High Emission ◽  
Nighttime Light

China is one of the largest carbon emitting countries in the world. Numerous strategies have been considered by the Chinese government to mitigate carbon emissions in recent years. Accurate and timely estimation of spatiotemporal variations of city-level carbon emissions is of vital importance for planning of low-carbon strategies. For an assessment of the spatiotemporal variations of city-level carbon emissions in China during the periods 2000–2017, we used nighttime light data as a proxy from two sources: Defense Meteorological Satellite Program’s Operational Linescan System (DMSP-OLS) data and the Suomi National Polar-orbiting Partnership satellite’s Visible Infrared Imaging Radiometer Suite (NPP-VIIRS). The results show that cities with low carbon emissions are located in the western and central parts of China. In contrast, cities with high carbon emissions are mainly located in the Beijing-Tianjin-Hebei region (BTH) and Yangtze River Delta (YRD). Half of the cities of China have been making efforts to reduce carbon emissions since 2012, and regional disparities among cities are steadily decreasing. Two clusters of high-emission cities located in the BTH and YRD followed two different paths of carbon emissions owing to the diverse political status and pillar industries. We conclude that carbon emissions in China have undergone a transformation to decline, but a very slow balancing between the spatial pattern of high-emission versus low-emission regions in China can be presumed.

scholarly journals How Do the Multi-Temporal Centroid Trajectories of Urban Heat Island Correspond to Impervious Surface Changes: A Case Study in Wuhan, China

2019 ◽  
Vol 16 (20) ◽  
pp. 3865 ◽  
Author(s):  
Chen Yang ◽  
Qingming Zhan ◽  
Sihang Gao ◽  
Huimin Liu
Keyword(s):  
Urban Heat Island ◽  
Thermal Environment ◽  
Impervious Surface ◽  
Heat Island ◽  
Impervious Surfaces ◽  
Spatiotemporal Variations ◽  
Multi Temporal ◽  
Urban Heat ◽  
Region Scale ◽  
Urban Thermal Environment

Conspicuous expansion and intensification of impervious surfaces accompanied by rapid urbanization are widely recognized to have exerted evident impacts on the urban thermal environment. Investigating the spatially and temporally varying relationships between Land Surface Temperature (LST) and impervious surfaces (IS) at multiple scales is of great significance for steering IS expansion and intensification. This study proposes an analytical framework to investigate the spatiotemporal variations of LST and its responses to IS in Wuhan, China at both city scale and sub-region scale. The summer LST patterns in 2002–2017 are extracted by Multi-Task Gaussian Process (MTGP) model from raw 8-day synthesized MODerate-resolution Imaging Spectroradiometer (MODIS) LST data. At the city scale, the weighted center of LST (LSTWC) and impervious surface fraction (ISFWC), multi-temporal trajectories and coupling indicators are utilized to comprehensively examine the spatial and temporal dynamics of LST and IS within Wuhan. At the sub-region scale, urban heat island ratio index (URI), impervious surfaces contribution index (ISCI) and sprawl rate are introduced for further quantifying the relationships of LST and IS. The results reveal that IS and hot thermal landscapes expanded by 407.43 km2 and 255.82 km2 in Wuhan in 2002–2017 at city scale. The trajectories of LSTWCs and ISFWCs are visually coherent and both heading to southeast direction in general. At the sub-region scale, the specific cardinal directions with the highest ISCI variations are examined to be the exact directions of ISFWC trajectories in 2002–2017. The results reveal that the spatiotemporal variations of LST and IS are highly correlated at both city and sub-region scales within Wuhan, thus testifying the significance of steering IS expansion and renewal for controlling urban thermal environment deterioration.

scholarly journals China’s city-level carbon emissions during 1992–2017 based on the inter-calibration of nighttime light data

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiandong Chen ◽  
Ming Gao ◽  
Shulei Cheng ◽  
Xin Liu ◽  
Wenxuan Hou ◽  
...  
Keyword(s):  
Carbon Emissions ◽  
Infrared Imaging ◽  
Carbon Intensity ◽  
Nighttime Light Data ◽  
Reduction Strategies ◽  
Nighttime Light ◽  
Novel Method ◽  
Data Source ◽  
Emission Reduction Strategies

AbstractAccurate, long-term, full-coverage carbon dioxide (CO2) data in units of prefecture-level cities are necessary for evaluations of CO2 emission reductions in China, which has become one of the world’s largest carbon-emitting countries. This study develops a novel method to match satellite-based Defense Meteorological Satellite Program’s Operational Landscan System (DMSP/OLS) and Suomi National Polar-orbiting Partnership’s Visible Infrared Imaging Radiometer Suite (NPP/VIIRS) nighttime light data, and estimates the CO2 emissions of 334 prefecture-level cities in China from 1992 to 2017. Results indicated that the eastern and coastal regions had higher carbon emissions, but their carbon intensity decreased more rapidly than other regions. Compared to previous studies, we provide the most extensive and long-term CO2 dataset to date, and these data will be of great value for further socioeconomic research. Specifically, this dataset provides a foundational data source for China’s future CO2 research and emission reduction strategies. Additionally, the methodology can be applied to other regions around the world.

scholarly journals Monitoring Spatiotemporal Changes of Impervious Surfaces in Beijing City Using Random Forest Algorithm and Textural Features

2021 ◽  
Vol 13 (1) ◽  
pp. 153
Author(s):  
Xuegang Dong ◽  
Zhiguo Meng ◽  
Yongzhi Wang ◽  
Yuanzhi Zhang ◽  
Haoteng Sun ◽  
...  
Keyword(s):  
Random Forest ◽  
Urban Areas ◽  
Impervious Surface ◽  
Capital City ◽  
Textural Features ◽  
Impervious Surfaces ◽  
Beijing City ◽  
Ring Road ◽  
Regional Feature ◽  
Exterior Regions

As the capital city of China, Beijing has experienced unprecedented economic and population growth and dramatic impervious surface changes during the last few decades. An application of the classification method combining the spectral and textural features based on Random Forest was conducted to monitor the spatial and temporal changes of Beijing’s impervious surfaces. This classification strategy achieved excellent performance in the impervious surface extraction in complex urban areas, as the Kappa coefficient reached 0.850. Based on this strategy, the impervious surfaces inside Beijing’s sixth ring road in 1997, 2002, 2007, 2013, and 2017 were extracted. As the development of Beijing has a special regional feature, the changes of impervious surfaces within the sixth ring road were assessed. The findings are as follows: (1) the textural features can significantly improve the classification accuracy of land cover in urban areas, especially for the impervious surface with high albedo. (2) Impervious surfaces within the sixth ring road expanded dramatically from 1997 to 2017, had three expanding periods: 1997–2002, 2002–2007, and 2013–2017, and only shrank in 2007–2013. There are different possible major driving factors for each period. (3) The region between the fifth and sixth ring roads in Beijing underwent the most significant changes in the two decades. (4) The inner three regions are relatively highly urbanized areas compared to the outer two regions. Urbanization processes in the interior regions tend to be completed compared to the exterior regions.

Sign in / Sign up

Export Citation Format

Share Document