scholarly journals Moving to Automated Tree Inventory: Comparison of UAS-Derived Lidar and Photogrammetric Data with Manual Ground Estimates

2020 ◽  
Vol 13 (1) ◽  
pp. 72
Author(s):  
Luiz Felipe Ramalho de Oliveira ◽  
H. Andrew Lassiter ◽  
Ben Wilkinson ◽  
Travis Whitley ◽  
Peter Ifju ◽  
...  
Keyword(s):  
Forest Inventory ◽  
Three Dimensional ◽  
Point Clouds ◽  
Detection Algorithm ◽  
Unmanned Aircraft ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Individual Tree ◽  
Tree Detection

Unmanned aircraft systems (UAS) have advanced rapidly enabling low-cost capture of high-resolution images with cameras, from which three-dimensional photogrammetric point clouds can be derived. More recently UAS equipped with laser scanners, or lidar, have been employed to create similar 3D datasets. While airborne lidar (originally from conventional aircraft) has been used effectively in forest systems for many years, the ability to obtain important tree features such as height, diameter at breast height, and crown dimensions is now becoming feasible for individual trees at reasonable costs thanks to UAS lidar. Getting to individual tree resolution is crucial for detailed phenotyping and genetic analyses. This study evaluates the quality of three three-dimensional datasets from three sensors—two cameras of different quality and one lidar sensor—collected over a managed, closed-canopy pine stand with different planting densities. For reference, a ground-based timber cruise of the same pine stand is also collected. This study then conducted three straightforward experiments to determine the quality of the three sensors’ datasets for use in automated forest inventory: manual mensuration of the point clouds to (1) detect trees and (2) measure tree heights, and (3) automated individual tree detection. The results demonstrate that, while both photogrammetric and lidar data are well-suited for single-tree forest inventory, the photogrammetric data from the higher-quality camera is sufficient for individual tree detection and height determination, but that lidar data is best. The automated tree detection algorithm used in the study performed well with the lidar data, detecting 98% of the 2199 trees in the pine stand, but fell short of manual mensuration within the lidar point cloud, where 100% of the trees were detected. The manually-mensurated heights in the lidar dataset correlated with field measurements at r = 0.95 with a bias of −0.25 m, where the photogrammetric datasets were again less accurate and precise.

scholarly journals Roof Plane Segmentation from Airborne LiDAR Data Using Hierarchical Clustering and Boundary Relabeling

2020 ◽  
Vol 12 (9) ◽  
pp. 1363 ◽  
Author(s):  
Li Li ◽  
Jian Yao ◽  
Jingmin Tu ◽  
Xinyi Liu ◽  
Yinxuan Li ◽  
...  
Keyword(s):  
Hierarchical Clustering ◽  
Three Dimensional ◽  
Region Growing ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Building Models ◽  
Novel Approach ◽  
Airborne Lidar Data ◽  
Seed Points

The roof plane segmentation is one of the key issues for constructing accurate three-dimensional building models from airborne light detection and ranging (LiDAR) data. Region growing is one of the most widely used methods to detect roof planes. It first selects one point or region as a seed, and then iteratively expands to neighboring points. However, region growing has two problems. The first problem is that it is hard to select the robust seed points. The other problem is that it is difficult to detect the accurate boundaries between two roof planes. In this paper, to solve these two problems, we propose a novel approach to segment the roof planes from airborne LiDAR point clouds using hierarchical clustering and boundary relabeling. For the first problem, we first extract the initial set of robust planar patches via an octree-based method, and then apply the hierarchical clustering method to iteratively merge the adjacent planar patches belonging to the same plane until the merging cost exceeds a predefined threshold. These merged planar patches are regarded as the robust seed patches for the next region growing. The coarse roof planes are generated by adding the non-planar points into the seed patches in sequence using region growing. However, the boundaries of coarse roof planes may be inaccurate. To solve this problem, namely, the second problem, we refine the boundaries between adjacent coarse planes by relabeling the boundary points. At last, we can effectively extract high-quality roof planes with smooth and accurate boundaries from airborne LiDAR data. We conducted our experiments on two datasets captured from Vaihingen and Wuhan using Leica ALS50 and Trimble Harrier 68i, respectively. The experimental results show that our proposed approach outperforms several representative approaches in both visual quality and quantitative metrics.

scholarly journals Mean Shift Segmentation Assessment for Individual Forest Tree Delineation from Airborne Lidar Data

2019 ◽  
Vol 11 (11) ◽  
pp. 1263 ◽  
Author(s):  
Wen Xiao ◽  
Aleksandra Zaforemska ◽  
Magdalena Smigaj ◽  
Yunsheng Wang ◽  
Rachel Gaulton
Keyword(s):  
Mean Shift ◽  
Point Clouds ◽  
Forest Tree ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Individual Tree ◽  
Mean Shift Algorithm ◽  
Detailed Assessment ◽  
The Mean ◽  
Airborne Lidar Data

Airborne lidar has been widely used for forest characterization to facilitate forest ecological and management studies. With the availability of increasingly higher point density, individual tree delineation (ITD) from airborne lidar point clouds has become a popular yet challenging topic, due to the complexity and diversity of forests. One important step of ITD is segmentation, for which various methodologies have been studied. Among them, a long proven image segmentation method, mean shift, has been applied directly onto 3D points, and has shown promising results. However, there are variations among those who implemented the algorithm in terms of the kernel shape, adaptiveness and weighting. This paper provides a detailed assessment of the mean shift algorithm for the segmentation of airborne lidar data, and the effect of crown top detection upon the validation of segmentation results. The results from three different datasets revealed that a crown-shaped kernel consistently generates better results (up to 7 percent) than other variants, whereas weighting and adaptiveness do not warrant improvements.

Density-Based Individual Tree Detection from Three-Dimensional Point Clouds

2021 ◽  
Author(s):  
Carlo Camporeale ◽  
Melissa Latella ◽  
Fabio Sola
Keyword(s):  
Time Series ◽  
Spatial Distribution ◽  
Three Dimensional ◽  
Region Of Interest ◽  
Point Clouds ◽  
Individual Tree ◽  
Tree Detection ◽  
Round Shape ◽  
Point Density ◽  
Individual Trees

<p>The use of three-dimensional point clouds in forestry is steadily increasing. Numerous algorithms to detect individual trees from point clouds and derive some fundamental inventory parameters have been proposed so far, but they usually provide higher accuracy in coniferous stands than in deciduous one. In the latter kind of stands, indeed, the tree identification is hampered by the geometrical round shape of the crowns, the interlacing branches of adjacent trees and the usual presence of understory vegetation.</p><p>In an attempt to overcome these limitations, we developed an algorithm that is innovatively based on the areal point density of the three-dimensional cloud and that provides the height and coordinates of all the trees within a region of interest.</p><p>In this work, we apply the algorithm to different situations, ranging from the regularly-arranged plantations to the very interlaced crowns of the naturally established stands, demonstrating how it is able to correctly detect most of the trees and recreate a map of their spatial distribution. We also test its capability to deal with relatively low point density and explore the possibility to use it to recreate time series of vegetation biomass. Finally, we discuss the algorithm’s limitations and potentialities, particularly focusing on its coupling to other existing tools to deal with a wider range of applications in forestry and land management.</p><p> </p>

scholarly journals A Comparison of ALS and Dense Photogrammetric Point Clouds for Individual Tree Detection in Radiata Pine Plantations

2021 ◽  
Vol 13 (17) ◽  
pp. 3536
Author(s):  
Irfan A. Iqbal ◽  
Jon Osborn ◽  
Christine Stone ◽  
Arko Lucieer
Keyword(s):  
Forest Inventory ◽  
Point Cloud ◽  
Point Clouds ◽  
Tree Level ◽  
Point Cloud Data ◽  
Individual Tree ◽  
Detection Rates ◽  
Cloud Data ◽  
Tree Detection ◽  
Structural Metrics

Digital aerial photogrammetry (DAP) has emerged as a potentially cost-effective alternative to airborne laser scanning (ALS) for forest inventory methods that employ point cloud data. Forest inventory derived from DAP using area-based methods has been shown to achieve accuracy similar to that of ALS data. At the tree level, individual tree detection (ITD) algorithms have been developed to detect and/or delineate individual trees either from ALS point cloud data or from ALS- or DAP-based canopy height models. An examination of the application of ITDs to DAP-based point clouds has not yet been reported. In this research, we evaluate the suitability of DAP-based point clouds for individual tree detection in the Pinus radiata plantation. Two ITD algorithms designed to work with point cloud data are applied to dense point clouds generated from small- and medium-format photography and to an ALS point cloud. Performance of the two ITD algorithms, the influence of stand structure on tree detection rates, and the relationship between tree detection rates and canopy structural metrics are investigated. Overall, we show that there is a good agreement between ALS- and DAP-based ITD results (proportion of false negatives for ALS, SFP, and MFP was always lower than 29.6%, 25.3%, and 28.6%, respectively, whereas, the proportion of false positives for ALS, SFP, and MFP was always lower than 39.4%, 30.7%, and 33.7%, respectively). Differences between small- and medium-format DAP results were minor (for SFP and MFP, differences between recall, precision, and F-score were always less than 0.08, 0.03, and 0.05, respectively), suggesting that DAP point cloud data is robust for ITD. Our results show that among all the canopy structural metrics, the number of trees per hectare has the greatest influence on the tree detection rates.

scholarly journals Cloth simulation-based construction of pit-free canopy height models from airborne LiDAR data

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Wuming Zhang ◽  
Shangshu Cai ◽  
Xinlian Liang ◽  
Jie Shao ◽  
Ronghai Hu ◽  
...  
Keyword(s):  
Tree Height ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Canopy Height ◽  
Lidar Data ◽  
Cloth Simulation ◽  
Simulation Based ◽  
Maximum Tree Height ◽  
Airborne Lidar Data ◽  
Better Than

Abstract Background The universal occurrence of randomly distributed dark holes (i.e., data pits appearing within the tree crown) in LiDAR-derived canopy height models (CHMs) negatively affects the accuracy of extracted forest inventory parameters. Methods We develop an algorithm based on cloth simulation for constructing a pit-free CHM. Results The proposed algorithm effectively fills data pits of various sizes whilst preserving canopy details. Our pit-free CHMs derived from point clouds at different proportions of data pits are remarkably better than those constructed using other algorithms, as evidenced by the lowest average root mean square error (0.4981 m) between the reference CHMs and the constructed pit-free CHMs. Moreover, our pit-free CHMs show the best performance overall in terms of maximum tree height estimation (average bias = 0.9674 m). Conclusion The proposed algorithm can be adopted when working with different quality LiDAR data and shows high potential in forestry applications.

scholarly journals Using Airborne Light Detection and Ranging (LIDAR) to Characterize Forest Stand Condition on the Kenai Peninsula of Alaska

2009 ◽  
Vol 24 (2) ◽  
pp. 95-102 ◽  
Author(s):  
Hans-Erik Andersen
Keyword(s):  
Forest Inventory ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Grid Cell ◽  
Forest Stand ◽  
Light Detection And Ranging ◽  
Inventory Analysis ◽  
Light Detection ◽  
Individual Tree ◽  
Kenai Peninsula

Abstract Airborne laser scanning (also known as light detection and ranging or LIDAR) data were used to estimate three fundamental forest stand condition classes (forest stand size, land cover type, and canopy closure) at 32 Forest Inventory Analysis (FIA) plots distributed over the Kenai Peninsula of Alaska. Individual tree crown segment attributes (height, area, and species type) were derived from the three-dimensional LIDAR point cloud, LIDAR-based canopy height models, and LIDAR return intensity information. The LIDAR-based crown segment and canopy cover information was then used to estimate condition classes at each 10-m grid cell on a 300 × 300-m area surrounding each FIA plot. A quantitative comparison of the LIDAR- and field-based condition classifications at the subplot centers indicates that LIDAR has potential as a useful sampling tool in an operational forest inventory program.

Sign in / Sign up

Export Citation Format

Share Document