scholarly journals Satellite Determination of Peatland Water Table Temporal Dynamics by Localizing Representative Pixels of A SWIR-Based Moisture Index

2020 ◽  
Vol 12 (18) ◽  
pp. 2936
Author(s):  
Iuliia Burdun ◽  
Michel Bechtold ◽  
Valentina Sagris ◽  
Annalea Lohila ◽  
Elyn Humphreys ◽  
...  
Keyword(s):  
Time Series ◽  
Soil Moisture ◽  
Water Table ◽  
Land Surface ◽  
Temporal Dynamics ◽  
Root Zone ◽  
Pearson Correlation ◽  
Remotely Sensed ◽  
Rooting Depth ◽  
Surface Model

The OPtical TRApezoid Model (OPTRAM) is a physically-based approach for remote soil moisture estimation. OPTRAM is based on the response of short-wave infrared (SWIR) reflectance to vegetation water status, which in turn responds to changes of root-zone soil moisture. In peatlands, the latter is tightly coupled to water table depth (WTD). Therefore, in theory, the OPTRAM index might be a useful tool to monitor WTD dynamics in peatlands, although the sensitivity of OPTRAM index to WTD changes will likely depend on vegetation cover and related rooting depth. In this study, we aim at identifying those locations (further called ‘best pixels’) where the OPTRAM index is most representative of overall peatland WTD dynamics. In peatlands, the high saturated hydraulic conductivity of the upper layer largely synchronizes the temporal WTD fluctuations over several kilometers, i.e., even though the mean and amplitude of the WTD dynamics may vary in space. Therefore, it can be assumed that the WTD time series, either measured at a single location or simulated for a grid cell with the PEATland-specific adaptation of the NASA Catchment Land Surface Model (PEATCLSM), are representative of the overall peatland WTD dynamics. We took advantage of this concept to identify the ‘best pixel’ of all spatially distributed OPTRAM pixels within a peatland, as that pixel with the highest time series Pearson correlation (R) with WTD data accounting for temporal autocorrelation. The OPTRAM index was calculated based on various remotely sensed images, namely, Landsat, MODIS, and aggregated Landsat images at MODIS resolution for five northern peatlands with long-term WTD records, including both bogs and fens. The ‘best pixels’ were dominantly covered with mosses and graminoids with little or no shrub or trees. However, the performance of OPTRAM highly depended on the spatial resolution of the remotely sensed data. The Landsat-based OPTRAM index yielded the highest R values (mean of 0.7 across the ‘best pixels’ in five peatlands). Our study further indicates that, in the absence of historical in situ data, PEATCLSM can be used as an alternative to localize ‘best pixels’. This finding enables the future applicability of OPTRAM to monitor WTD changes in peatlands on a global scale.

scholarly journals Cross-evaluation of modelled and remotely sensed surface soil moisture with in situ data in southwestern France

2010 ◽  
Vol 14 (11) ◽  
pp. 2177-2191 ◽  
Author(s):  
C. Albergel ◽  
J.-C. Calvet ◽  
P. de Rosnay ◽  
G. Balsamo ◽  
W. Wagner ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Surface Soil ◽  
Root Zone ◽  
Weather Prediction ◽  
Remotely Sensed ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Moisture Profile

Abstract. The SMOSMANIA soil moisture network in Southwestern France is used to evaluate modelled and remotely sensed soil moisture products. The surface soil moisture (SSM) measured in situ at 5 cm permits to evaluate SSM from the SIM operational hydrometeorological model of Météo-France and to perform a cross-evaluation of the normalised SSM estimates derived from coarse-resolution (25 km) active microwave observations from the ASCAT scatterometer instrument (C-band, onboard METOP), issued by EUMETSAT and resampled to the Discrete Global Grid (DGG, 12.5 km gridspacing) by TU-Wien (Vienna University of Technology) over a two year period (2007–2008). A downscaled ASCAT product at one kilometre scale is evaluated as well, together with operational soil moisture products of two meteorological services, namely the ALADIN numerical weather prediction model (NWP) and the Integrated Forecasting System (IFS) analysis of Météo-France and ECMWF, respectively. In addition to the operational SSM analysis of ECMWF, a second analysis using a simplified extended Kalman filter and assimilating the ASCAT SSM estimates is tested. The ECMWF SSM estimates correlate better with the in situ observations than the Météo-France products. This may be due to the higher ability of the multi-layer land surface model used at ECMWF to represent the soil moisture profile. However, the SSM derived from SIM corresponds to a thin soil surface layer and presents good correlations with ASCAT SSM estimates for the very first centimetres of soil. At ECMWF, the use of a new data assimilation technique, which is able to use the ASCAT SSM, improves the SSM and the root-zone soil moisture analyses.

scholarly journals Multivariate Assimilation of Remotely Sensed Soil Moisture and Evapotranspiration for Drought Monitoring

2020 ◽  
Vol 21 (10) ◽  
pp. 2293-2308 ◽  
Author(s):  
Keyhan Gavahi ◽  
Peyman Abbaszadeh ◽  
Hamid Moradkhani ◽  
Xiwu Zhan ◽  
Christopher Hain
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Root Zone ◽  
Remotely Sensed ◽  
Open Loop ◽  
Divide And Conquer ◽  
Drought Monitoring ◽  
Filter Method ◽  
Drought Severity ◽  
Surface Model

AbstractSoil moisture (SM) and evapotranspiration (ET) are key variables of the terrestrial water cycle with a strong relationship. This study examines remotely sensed soil moisture and evapotranspiration data assimilation (DA) with the aim of improving drought monitoring. Although numerous efforts have gone into assimilating satellite soil moisture observations into land surface models to improve their predictive skills, little attention has been given to the combined use of soil moisture and evapotranspiration to better characterize hydrologic fluxes. In this study, we assimilate two remotely sensed datasets, namely, Soil Moisture Operational Product System (SMOPS) and MODIS evapotranspiration (MODIS16 ET), at 1-km spatial resolution, into the VIC land surface model by means of an evolutionary particle filter method. To achieve this, a fully parallelized framework based on model and domain decomposition using a parallel divide-and-conquer algorithm was implemented. The findings show improvement in soil moisture predictions by multivariate assimilation of both ET and SM as compared to univariate scenarios. In addition, monthly and weekly drought maps are produced using the updated root-zone soil moisture percentiles over the Apalachicola–Chattahoochee–Flint basin in the southeastern United States. The model-based estimates are then compared against the corresponding U.S. Drought Monitor (USDM) archive maps. The results are consistent with the USDM maps during the winter and spring season considering the drought extents; however, the drought severity was found to be slightly higher according to DA method. Comparing different assimilation scenarios showed that ET assimilation results in wetter conditions comparing to open-loop and univariate SM DA. The multivariate DA then combines the effects of the two variables and provides an in-between condition.

scholarly journals Cross-evaluation of modelled and remotely sensed surface soil moisture with in situ data in Southwestern France

2010 ◽  
Vol 7 (4) ◽  
pp. 4291-4330 ◽  
Author(s):  
C. Albergel ◽  
J.-C. Calvet ◽  
P. de Rosnay ◽  
G. Balsamo ◽  
W. Wagner ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Surface Soil ◽  
Root Zone ◽  
Weather Prediction ◽  
Remotely Sensed ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Moisture Profile

Abstract. The SMOSMANIA soil moisture network in Southwestern France is used to evaluate synthetic and remotely sensed soil moisture products. The surface soil moisture (SSM) measured in situ at 5 cm permits to evaluate synthetic SSM from the SIM operational hydrometeorological model of Météo-France and to perform a cross-evaluation of the normalised SSM estimates derived from coarse-resolution (25 km) active microwave observations from the ASCAT scatterometer instrument (C-band, onboard METOP), issued by EUMETSAT and resampled to the Discrete Global Grid (DGG, 12.5 km grid spacing) by TU-Wien (Vienna University of Technology) over a two year period (2007–2008). A downscaled ASCAT product at one kilometre scale is evaluated as well, together with operational soil moisture products of two meteorological services, namely the ALADIN numerical weather prediction model (NWP) and the Integrated Forecasting System (IFS) analysis of Météo-France and ECMWF, respectively. In addition to the operational SSM analysis of ECMWF, a second analysis using a simplified extended Kalman filter and assimilating the ASCAT SSM estimates is tested. The ECMWF SSM estimates correlate better with the in situ observations than the Météo-France products. This may be due to the higher ability of the multi-layer land surface model used at ECMWF to represent the soil moisture profile. However, the SSM derived from SIM corresponds to a thin soil surface layer and presents good correlations with ASCAT SSM estimates for the very first centimetres of soil. At ECMWF, the use of a new data assimilation technique, which is able to use the ASCAT SSM, improves the SSM and the root-zone soil moisture analyses.

scholarly journals Assimilation of Remotely Sensed Soil Moisture and Snow Depth Retrievals for Drought Estimation

2014 ◽  
Vol 15 (6) ◽  
pp. 2446-2469 ◽  
Author(s):  
Sujay V. Kumar ◽  
Christa D. Peters-Lidard ◽  
David Mocko ◽  
Rolf Reichle ◽  
Yuqiong Liu ◽  
...  
Keyword(s):  
United States ◽  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Snow Depth ◽  
Root Zone ◽  
Remotely Sensed ◽  
Open Loop ◽  
Surface Model ◽  
The Impact

Abstract The accurate knowledge of soil moisture and snow conditions is important for the skillful characterization of agricultural and hydrologic droughts, which are defined as deficits of soil moisture and streamflow, respectively. This article examines the influence of remotely sensed soil moisture and snow depth retrievals toward improving estimates of drought through data assimilation. Soil moisture and snow depth retrievals from a variety of sensors (primarily passive microwave based) are assimilated separately into the Noah land surface model for the period of 1979–2011 over the continental United States, in the North American Land Data Assimilation System (NLDAS) configuration. Overall, the assimilation of soil moisture and snow datasets was found to provide marginal improvements over the open-loop configuration. Though the improvements in soil moisture fields through soil moisture data assimilation were barely at the statistically significant levels, these small improvements were found to translate into subsequent small improvements in simulated streamflow. The assimilation of snow depth datasets were found to generally improve the snow fields, but these improvements did not always translate to corresponding improvements in streamflow, including some notable degradations observed in the western United States. A quantitative examination of the percentage drought area from root-zone soil moisture and streamflow percentiles was conducted against the U.S. Drought Monitor data. The results suggest that soil moisture assimilation provides improvements at short time scales, both in the magnitude and representation of the spatial patterns of drought estimates, whereas the impact of snow data assimilation was marginal and often disadvantageous.

scholarly journals Assimilation of SMOS brightness temperatures or soil moisture retrievals into a land surface model

2016 ◽  
Vol 20 (12) ◽  
pp. 4895-4911 ◽  
Author(s):  
Gabriëlle J. M. De Lannoy ◽  
Rolf H. Reichle
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Surface Soil ◽  
Root Zone ◽  
Incidence Angle ◽  
Land Surface Model ◽  
Surface Model ◽  
Model Errors ◽  
Surface Soil Moisture ◽  
Brightness Temperatures

Abstract. Three different data products from the Soil Moisture Ocean Salinity (SMOS) mission are assimilated separately into the Goddard Earth Observing System Model, version 5 (GEOS-5) to improve estimates of surface and root-zone soil moisture. The first product consists of multi-angle, dual-polarization brightness temperature (Tb) observations at the bottom of the atmosphere extracted from Level 1 data. The second product is a derived SMOS Tb product that mimics the data at a 40° incidence angle from the Soil Moisture Active Passive (SMAP) mission. The third product is the operational SMOS Level 2 surface soil moisture (SM) retrieval product. The assimilation system uses a spatially distributed ensemble Kalman filter (EnKF) with seasonally varying climatological bias mitigation for Tb assimilation, whereas a time-invariant cumulative density function matching is used for SM retrieval assimilation. All assimilation experiments improve the soil moisture estimates compared to model-only simulations in terms of unbiased root-mean-square differences and anomaly correlations during the period from 1 July 2010 to 1 May 2015 and for 187 sites across the US. Especially in areas where the satellite data are most sensitive to surface soil moisture, large skill improvements (e.g., an increase in the anomaly correlation by 0.1) are found in the surface soil moisture. The domain-average surface and root-zone skill metrics are similar among the various assimilation experiments, but large differences in skill are found locally. The observation-minus-forecast residuals and analysis increments reveal large differences in how the observations add value in the Tb and SM retrieval assimilation systems. The distinct patterns of these diagnostics in the two systems reflect observation and model errors patterns that are not well captured in the assigned EnKF error parameters. Consequently, a localized optimization of the EnKF error parameters is needed to further improve Tb or SM retrieval assimilation.

scholarly journals Field-scale soil moisture bridges the spatial-scale gap between drought monitoring and agricultural yields

2020 ◽  
Author(s):  
Noemi Vergopolan ◽  
Sitian Xiong ◽  
Lyndon Estes ◽  
Niko Wanders ◽  
Nathaniel W. Chaney ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Spatial Scale ◽  
Root Zone ◽  
Maize Yield ◽  
Remotely Sensed ◽  
Drought Monitoring ◽  
Surface Model ◽  
Field Scale ◽  
Yield Data ◽  
Scale Modeling

Abstract. Soil moisture is highly variable in space, and its deficits (i.e. droughts) plays an important role in modulating crop yields and its variability across landscapes. Limited hydroclimate and yield data, however, hampers drought impact monitoring and assessment at the farmer field-scale. This study demonstrates the potential of field-scale soil moisture simulations to advance high-resolution agricultural yield prediction and drought monitoring at the smallholder farm field-scale. We present a multi-scale modeling approach that combines HydroBlocks, a physically-based hyper-resolution Land Surface Model (LSM), and machine learning. We applied HydroBlocks to simulate root zone soil moisture and soil temperature in Zambia at 3-hourly 30-m resolution. These simulations along with remotely sensed vegetation indices, meteorological conditions, and data describing the physical properties of the landscape (topography, land cover, soil properties) were combined with district-level maize data to train a random forest model (RF) to predict maize yields at the district- and field-scale (250-m) levels. Our model predicted yields with a coefficient of variation (R2) of 0.61, Mean Absolute Error (MAE) of 349 kg ha−1, and mean normalized error of 22 %. We captured maize losses due to the 2015/2016 El Niño drought at similar levels to losses reported by the Food and Agriculture Organization (FAO). Our results revealed that soil moisture is the strongest and most reliable predictor of maize yield, driving its spatial and temporal variability. Consequently, soil moisture was also the most effective indicator of drought impacts in crops when compared with precipitation, soil and air temperatures, and remotely-sensed NDVI-based drought indices. By combining field-scale root zone soil moisture estimates with observed maize yield data, this research demonstrates how field-scale modeling can help bridge the spatial scale discontinuity gap between drought monitoring and agricultural impacts.

Towards an operationally capable satellite-based 0-100 cm soil moisture dataset from C3S

2021 ◽  
Author(s):  
Adam Pasik ◽  
Wolfgang Preimesberger ◽  
Bernhard Bauer-Marschallinger ◽  
Wouter Dorigo
Keyword(s):  
Soil Moisture ◽  
Soil Profile ◽  
Land Surface ◽  
Root Zone ◽  
Soil Layer ◽  
Land Surface Model ◽  
In Situ Measurements ◽  
Surface Model ◽  
T Values

<p>Multiple satellite-based global surface soil moisture (SSM) datasets are presently available, these however, address exclusively the top layer of the soil (0-5cm). Meanwhile, root-zone soil moisture cannot be directly quantified with remote sensing but can be estimated from SSM using a land surface model. Alternatively, soil water index (SWI; calculated from SSM as a function of time needed for infiltration) can be used as a simple approximation of root-zone conditions. SWI is a proxy for deeper layers of the soil profile which control evapotranspiration, and is hence especially important for studying hydrological processes over vegetation-covered areas and meteorological modelling.</p><p>Here we introduce the advances in our work on the first operationally capable SWI-based root-zone soil moisture dataset from C3S Soil Moisture v201912 COMBINED product, spanning the period 2002-2020. The uniqueness of this dataset lies in the fact that T-values (temporal lengths ruling the infiltration) characteristic of SWI were translated into particular soil depths making it much more intuitive, user-friendly and easily applicable. Available are volumetric soil moisture values for the top 1 m of the soil profile at 10 cm intervals, where the optimal T-value (T-best) for each soil layer is selected based on a range of correlation metrics with in situ measurements from the International Soil Moisture Network (ISMN) and the relevant soil and climatic parameters.<br>Additionally we present the results of an extensive global validation against in situ measurements (ISMN) as well as the results of investigations into the relationship between a range of soil and climate characteristics and the optimal T-values for particular soil depths.</p>

Cosmic Ray Neutron Sensing: Integration with land surface modelling using data assimilation for improved field-scale soil moisture estimates

2020 ◽  
Author(s):  
Amol Patil ◽  
Benjamin Fersch ◽  
Harrie-Jan Hendricks-Franssen ◽  
Harald Kunstmann
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Spatial Resolution ◽  
Land Surface ◽  
Root Zone ◽  
Cosmic Ray ◽  
Soil Parameters ◽  
Surface Model ◽  
Field Scale ◽  
Spatio Temporal

<p>Soil moisture is a key variable in atmospheric modelling to resolve the partitioning of net radiation into sensible and latent heat fluxes. Therefore, high resolution spatio-temporal soil moisture estimation is getting growing attention in this decade. The recent developments to observe soil moisture at field scale (170 to 250 m spatial resolution) using Cosmic Ray Neutron Sensing (CRNS) technique has created new opportunities to better resolve land surface atmospheric interactions; however, many challenges remain such as spatial resolution mismatch and estimation uncertainties. Our study couples the Noah-MP land surface model to the Data Assimilation Research Testbed (DART) for assimilating CRN intensities to update model soil moisture. For evaluation, the spatially distributed Noah-MP was set up to simulate the land surface variables at 1 km horizontal resolution for the Rott and Ammer catchments in southern Germany. The study site comprises the TERENO-preAlpine observatory with five CRNS stations and additional CRNS measurements for summer 2019 operated by our Cosmic Sense research group. We adjusted the soil parametrization in Noah-MP to allow the usage of EU soil data along with Mualem-van Genuchten soil hydraulic parameters. We use independent observations from extensive soil moisture sensor network (SoilNet) within the vicinity of CRNS sensors for validation. Our detailed synthetic and real data experiments are evaluated for the analysis of the spatio-temporal changes in updated root zone soil moisture and for implications on the energy balance component of Noah-MP. Furthermore, we present possibilities to estimate root zone soil parameters within the data assimilation framework to enhance standalone model performance.</p>

Multi-scale assimilation of SMAP data: comparison between land surface and land surface-subsurface model

2020 ◽  
Author(s):  
Haojin Zhao ◽  
Roland Baatz ◽  
Carsten Montzka ◽  
Harry Vereecken ◽  
Harrie-Jan Hendricks Franssen
Keyword(s):  
Parameter Estimation ◽  
Soil Moisture ◽  
Data Assimilation ◽  
Simulation Model ◽  
Land Surface ◽  
Cosmic Ray ◽  
Remotely Sensed ◽  
Surface Model ◽  
Systematic Bias

<p>Soil moisture plays an important role in the coupled water and energy cycles of the terrestrial system. However, the characterization of soil moisture at the large spatial scale is far from trivial. To cope with this challenge, the combination of data from different sources (in situ measurements by cosmic ray neutron sensors, remotely sensed soil moisture and simulated soil moisture by models) is pursued. This is done by multiscale data assimilation, to take the different resolutions of the data into account. A large number of studies on the assimilation of remotely sensed soil moisture in land surface models has been published, which show in general only a limited improvement in the characterization of root zone soil moisture, and no improvement in the characterization of evapotranspiration. In this study it was investigated whether an improved modelling of soil moisture content, using a simulation model where the interactions between the land surface, surface water and groundwater are better represented, can contribute to extracting more information from SMAP data. In this study over North-Rhine-Westphalia, the assimilation of remotely sensed soil moisture from SMAP in the coupled land surface-subsurface model TSMP was tested. Results were compared with the assimilation in the stand-alone land surface model CLM. It was also tested whether soil hydraulic parameter estimation in combination with state updating could give additional skill compared to assimilation in CLM stand-alone and without parameter updating. Results showed that modelled soil moisture by TSMP did not show a systematic bias compared to SMAP, whereas CLM was systematically wetter than TSMP. Therefore, no prior bias correction was needed in the data assimilation. The results illustrate how the difference in simulation model and parameter estimation result in significantly different estimated soil moisture contents and evapotranspiration.  </p>

Sign in / Sign up

Export Citation Format

Share Document