scholarly journals Mapping Seasonal Tree Canopy Cover and Leaf Area Using Worldview-2/3 Satellite Imagery: A Megacity-Scale Case Study in Tokyo Urban Area

2020 ◽  
Vol 12 (9) ◽  
pp. 1505
Author(s):  
Yutaka Kokubu ◽  
Seiichi Hara ◽  
Akira Tani
Keyword(s):  
Leaf Area ◽  
Urban Area ◽  
Satellite Imagery ◽  
Canopy Cover ◽  
Tree Canopy ◽  
Tree Level ◽  
Total Leaf Area ◽  
Individual Tree ◽  
Total Leaf ◽  
Tree Canopy Cover

This study presents a methodology for developing a high-resolution (2 m) urban tree canopy leaf area inventory in different tree phenological seasons and a subsequent application of the methodology to a 625 km2 urban area in Tokyo. Satellite remote sensing has the advantage of imaging large areas simultaneously. However, mapping the tree canopy cover and leaf area accurately is still difficult in a highly heterogeneous urban landscape. The WorldView-2/3 satellite imagery at the individual tree level (2 m resolution) was used to map urban trees based on a simple pixel-based classification method. The comparison of our mapping results with the tree canopy cover derived from aerial photography shows that the error margin is within an acceptable range of 5.5% at the 3.0 km2 small district level, 5.0% at the 60.9 km2 municipality level, and 1.2% at the 625 km2 city level. Furthermore, we investigated the relationship between the satellite data (vegetation index) and in situ tree-measurement data (leaf area index) to develop a simple model to directly map the tree leaf area from the WorldView-2/3 imagery. The estimated total leaf area in Tokyo urban area in the leaf-on season (633 km2) was twice that of the leaf-off season (319 km2). Our results also showed that the estimated total leaf area in Tokyo urban area was 1.9–6.2 times higher than the results of the moderate-resolution (30 m) satellite imagery.

scholarly journals MAPPING URBAN TREE CANOPY COVER USING FUSED AIRBORNE LIDAR AND SATELLITE IMAGERY DATA

2016 ◽  
Vol III-7 ◽  
pp. 181-186
Author(s):  
Ebadat G. Parmehr ◽  
Marco Amati ◽  
Clive S. Fraser
Keyword(s):  
Satellite Imagery ◽  
Point Cloud ◽  
Canopy Cover ◽  
Tree Canopy ◽  
Airborne Lidar ◽  
Urban Green Spaces ◽  
Cloud Classification ◽  
Tree Canopy Cover ◽  
Point Cloud Classification ◽  
Imagery Data

Urban green spaces, particularly urban trees, play a key role in enhancing the liveability of cities. The availability of accurate and up-to-date maps of tree canopy cover is important for sustainable development of urban green spaces. LiDAR point clouds are widely used for the mapping of buildings and trees, and several LiDAR point cloud classification techniques have been proposed for automatic mapping. However, the effectiveness of point cloud classification techniques for automated tree extraction from LiDAR data can be impacted to the point of failure by the complexity of tree canopy shapes in urban areas. Multispectral imagery, which provides complementary information to LiDAR data, can improve point cloud classification quality. This paper proposes a reliable method for the extraction of tree canopy cover from fused LiDAR point cloud and multispectral satellite imagery data. The proposed method initially associates each LiDAR point with spectral information from the co-registered satellite imagery data. It calculates the normalised difference vegetation index (NDVI) value for each LiDAR point and corrects tree points which have been misclassified as buildings. Then, region growing of tree points, taking the NDVI value into account, is applied. Finally, the LiDAR points classified as tree points are utilised to generate a canopy cover map. The performance of the proposed tree canopy cover mapping method is experimentally evaluated on a data set of airborne LiDAR and WorldView 2 imagery covering a suburb in Melbourne, Australia.

scholarly journals Accuracy of a LiDAR-Based Individual Tree Detection and Attribute Measurement Algorithm Developed to Inform Forest Products Supply Chain and Resource Management

Forests ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 3
Author(s):  
Aaron M. Sparks ◽  
Alistair M.S. Smith
Keyword(s):  
Supply Chain ◽  
Tree Species ◽  
Coniferous Forest ◽  
Canopy Cover ◽  
Forest Products ◽  
Tree Canopy ◽  
Tree Level ◽  
Individual Tree ◽  
Tree Detection ◽  
Canopy Position

Individual Tree Detection (ITD) algorithms that use Airborne Laser Scanning (ALS) data can provide accurate tree locations and measurements of tree-level attributes that are required for stand-to-landscape scale forest inventory and supply chain management. While numerous ITD algorithms exist, few have been assessed for accuracy in stands with complex forest structure and composition, limiting their utility for operational application. In this study, we conduct a preliminary assessment of the ability of the ForestView® algorithm created by Northwest Management Incorporated to detect individual trees, classify tree species, live/dead status, canopy position, and estimate height and diameter at breast height (DBH) in a mixed coniferous forest with an average tree density of 543 (s.d. ±387) trees/hectare. ITD accuracy was high in stands with lower canopy cover (recall: 0.67, precision: 0.8) and lower in stands with higher canopy cover (recall: 0.36, precision: 0.67), mainly owing to omission of suppressed trees that were not detected under the dominant tree canopy. Tree species that were well-represented within the study area had high classification accuracies (producer’s/user’s accuracies > ~60%). The similarity between the ALS estimated and observed tree attributes was high, with no statistical difference in the ALS estimated height and DBH distributions and the field observed height and DBH distributions. RMSEs for tree-level height and DBH were 0.69 m and 7.2 cm, respectively. Overall, this algorithm appears comparable to other ITD and measurement algorithms, but quantitative analyses using benchmark datasets in other forest types and cross-comparisons with other ITD algorithms are needed.

scholarly journals MAPPING URBAN TREE CANOPY COVER USING FUSED AIRBORNE LIDAR AND SATELLITE IMAGERY DATA

2016 ◽  
Vol III-7 ◽  
pp. 181-186 ◽  
Author(s):  
Ebadat G. Parmehr ◽  
Marco Amati ◽  
Clive S. Fraser
Keyword(s):  
Satellite Imagery ◽  
Point Cloud ◽  
Canopy Cover ◽  
Tree Canopy ◽  
Airborne Lidar ◽  
Urban Green Spaces ◽  
Cloud Classification ◽  
Tree Canopy Cover ◽  
Point Cloud Classification ◽  
Imagery Data

Urban green spaces, particularly urban trees, play a key role in enhancing the liveability of cities. The availability of accurate and up-to-date maps of tree canopy cover is important for sustainable development of urban green spaces. LiDAR point clouds are widely used for the mapping of buildings and trees, and several LiDAR point cloud classification techniques have been proposed for automatic mapping. However, the effectiveness of point cloud classification techniques for automated tree extraction from LiDAR data can be impacted to the point of failure by the complexity of tree canopy shapes in urban areas. Multispectral imagery, which provides complementary information to LiDAR data, can improve point cloud classification quality. This paper proposes a reliable method for the extraction of tree canopy cover from fused LiDAR point cloud and multispectral satellite imagery data. The proposed method initially associates each LiDAR point with spectral information from the co-registered satellite imagery data. It calculates the normalised difference vegetation index (NDVI) value for each LiDAR point and corrects tree points which have been misclassified as buildings. Then, region growing of tree points, taking the NDVI value into account, is applied. Finally, the LiDAR points classified as tree points are utilised to generate a canopy cover map. The performance of the proposed tree canopy cover mapping method is experimentally evaluated on a data set of airborne LiDAR and WorldView 2 imagery covering a suburb in Melbourne, Australia.

Zoning, land use, and urban tree canopy cover: The importance of scale

2013 ◽  
Vol 12 (2) ◽  
pp. 191-199 ◽  
Author(s):  
Sarah K. Mincey ◽  
Mikaela Schmitt-Harsh ◽  
Richard Thurau
Keyword(s):  
Land Use ◽  
Canopy Cover ◽  
Tree Canopy ◽  
Urban Tree ◽  
Tree Canopy Cover ◽  
Urban Tree Canopy

scholarly journals Development and Performance Evaluation of a Very Low-Cost UAV-Lidar System for Forestry Applications

2020 ◽  
Vol 13 (1) ◽  
pp. 77
Author(s):  
Tianyu Hu ◽  
Xiliang Sun ◽  
Yanjun Su ◽  
Hongcan Guan ◽  
Qianhui Sun ◽  
...  
Keyword(s):  
Forest Inventory ◽  
Low Cost ◽  
Canopy Cover ◽  
Tree Height ◽  
Flying Height ◽  
Tree Level ◽  
Forest Site ◽  
Lidar System ◽  
Individual Tree ◽  
Gap Fraction

Accurate and repeated forest inventory data are critical to understand forest ecosystem processes and manage forest resources. In recent years, unmanned aerial vehicle (UAV)-borne light detection and ranging (lidar) systems have demonstrated effectiveness at deriving forest inventory attributes. However, their high cost has largely prevented them from being used in large-scale forest applications. Here, we developed a very low-cost UAV lidar system that integrates a recently emerged DJI Livox MID40 laser scanner (~$600 USD) and evaluated its capability in estimating both individual tree-level (i.e., tree height) and plot-level forest inventory attributes (i.e., canopy cover, gap fraction, and leaf area index (LAI)). Moreover, a comprehensive comparison was conducted between the developed DJI Livox system and four other UAV lidar systems equipped with high-end laser scanners (i.e., RIEGL VUX-1 UAV, RIEGL miniVUX-1 UAV, HESAI Pandar40, and Velodyne Puck LITE). Using these instruments, we surveyed a coniferous forest site and a broadleaved forest site, with tree densities ranging from 500 trees/ha to 3000 trees/ha, with 52 UAV flights at different flying height and speed combinations. The developed DJI Livox MID40 system effectively captured the upper canopy structure and terrain surface information at both forest sites. The estimated individual tree height was highly correlated with field measurements (coniferous site: R2 = 0.96, root mean squared error/RMSE = 0.59 m; broadleaved site: R2 = 0.70, RMSE = 1.63 m). The plot-level estimates of canopy cover, gap fraction, and LAI corresponded well with those derived from the high-end RIEGL VUX-1 UAV system but tended to have systematic biases in areas with medium to high canopy densities. Overall, the DJI Livox MID40 system performed comparably to the RIEGL miniVUX-1 UAV, HESAI Pandar40, and Velodyne Puck LITE systems in the coniferous site and to the Velodyne Puck LITE system in the broadleaved forest. Despite its apparent weaknesses of limited sensitivity to low-intensity returns and narrow field of view, we believe that the very low-cost system developed by this study can largely broaden the potential use of UAV lidar in forest inventory applications. This study also provides guidance for the selection of the appropriate UAV lidar system and flight specifications for forest research and management.

scholarly journals Diversity of Medicinal Plants among Different Tree Canopies

2021 ◽  
Vol 13 (5) ◽  
pp. 2640
Author(s):  
Muhammad Zubair ◽  
Akash Jamil ◽  
Syed Bilal Hussain ◽  
Ahsan Ul Haq ◽  
Ahmad Hussain ◽  
...  
Keyword(s):  
Medicinal Plants ◽  
Coniferous Forest ◽  
Canopy Cover ◽  
Local Communities ◽  
Tree Canopy ◽  
Tree Cover ◽  
Open Spaces ◽  
Floral Diversity ◽  
Tree Canopy Cover ◽  
Closed Canopy

The moist temperate forests in Northern Pakistan are home to a variety of flora and fauna that are pivotal in sustaining the livelihoods of the local communities. In these forests, distribution and richness of vegetation, especially that of medicinal plants, is rarely reported. In this study, we carried out a vegetation survey in District Balakot, located in Northeastern Pakistan, to characterize the diversity of medicinal plants under different canopies of coniferous forest. The experimental site was divided into three major categories (viz., closed canopy, open spaces, and partial tree cover). A sampling plot of 100 m2 was established on each site to measure species diversity, dominance, and evenness. To observe richness and abundance, the rarefaction and rank abundance curves were plotted. Results revealed that a total of 45 species representing 34 families were available in the study site. Medicinal plants were the most abundant (45%) followed by edible plants (26%). Tree canopy cover affected the overall growth of medicinal plants on the basis of abundance and richness. The site with partial canopy exhibited the highest diversity, dominance, and abundance compared to open spaces and closed canopy. These findings are instrumental in identifying the wealth of the medicinal floral diversity in the northeastern temperate forest of Balakot and the opportunity to sustain the livelihoods of local communities with the help of public/private partnership.

scholarly journals Estimating Forest Canopy Cover by Multiscale Remote Sensing in Northeast Jiangxi, China

Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 433
Author(s):  
Xiaolan Huang ◽  
Weicheng Wu ◽  
Tingting Shen ◽  
Lifeng Xie ◽  
Yaozu Qin ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Large Scale ◽  
Forest Canopy ◽  
Canopy Cover ◽  
Google Earth ◽  
Tree Canopy ◽  
Landsat Data ◽  
High Resolution Data ◽  
Modis Ndvi ◽  
Tree Canopy Cover

This research was focused on estimation of tree canopy cover (CC) by multiscale remote sensing in south China. The key aim is to establish the relationship between CC and woody NDVI (NDVIW) or to build a CC-NDVIW model taking northeast Jiangxi as an example. Based on field CC measurements, this research used Google Earth as a complementary source to measure CC. In total, 63 sample plots of CC were created, among which 45 were applied for modeling and the remaining 18 were employed for verification. In order to ascertain the ratio R of NDVIW to the satellite observed NDVI, a 20-year time-series MODIS NDVI dataset was utilized for decomposition to obtain the NDVIW component, and then the ratio R was calculated with the equation R = (NDVIW/NDVI) *100%, respectively, for forest (CC >60%), medium woodland (CC = 25–60%) and sparse woodland (CC 1–25%). Landsat TM and OLI images that had been orthorectified by the provider USGS were atmospherically corrected using the COST model and used to derive NDVIL. R was multiplied for the NDVIL image to extract the woody NDVI (NDVIWL) from Landsat data for each of these plots. The 45 plots of CC data were linearly fitted to the NDVIWL, and a model with CC = 103.843 NDVIW + 6.157 (R2 = 0.881) was obtained. This equation was applied to predict CC at the 18 verification plots and a good agreement was found (R2 = 0.897). This validated CC-NDVIW model was further applied to the woody NDVI of forest, medium woodland and sparse woodland derived from Landsat data for regional CC estimation. An independent group of 24 measured plots was utilized for validation of the results, and an accuracy of 83.0% was obtained. Thence, the developed model has high predictivity and is suitable for large-scale estimation of CC using high-resolution data.

scholarly journals Lesser-known ethnic leafy vegetables Talinum paniculatum grown at tropical ecosystem: Morphological traits and non-destructive estimation of total leaf area per branch

2021 ◽  
Vol 22 (10) ◽  
Author(s):  
Benyamin Lakitan ◽  
Kartika Kartika ◽  
Laily Ilman Widuri ◽  
Erna Siaga ◽  
Lya Nailatul Fadilah
Keyword(s):  
Regression Model ◽  
Leaf Area ◽  
Morphological Traits ◽  
Leafy Vegetables ◽  
Stem Cuttings ◽  
Total Leaf Area ◽  
Tropical Ecosystem ◽  
Total Leaf ◽  
Tropical Conditions ◽  
Non Destructive

Abstract. Lakitan B, Kartika K, Widuri LI, Siaga E, Fadilah LN. 2021. Lesser-known ethnic leafy vegetables Talinum paniculatum grown at tropical ecosystem: Morphological traits and non-destructive estimation of total leaf area per branch. Biodiversitas 22: 4487-4495. Talinum paniculatum known as Java ginseng is an ethnic vegetable in Indonesia that has also been utilized as a medical plant. Young leaves are the primary economic part of T. paniculatum, which can be eaten fresh or cooked. This study was focused on characterizing morphological traits of T. panicultaum and developing a non-destructive yet accurate and reliable model for predicting total area per leaf cluster on each elongated branch per flush growth cycle. The non-destructive approach allows frequent and timely measurements. In addition, the developed model can be used as guidance for deciding the time to harvest for optimum yield. Results indicated that T. paniculatum flourished rapidly under wet tropical conditions, especially if they were propagated using stem cuttings. The plants produced more than 50 branches and more than 800 leaves, or on average produced more than 15 leaves per branch at the age of nine weeks after planting (WAP). The zero-intercept linear model using a combination of two traits of length x width (LW) as a predictor was accurate and reliable for predicting a single leaf area (R2 = 0.997). Meanwhile, the estimation of total area per leaf cluster was more accurate if three traits, i.e., number of leaves, the longest leaf, and the widest leaf in each cluster were used as predictors with the zero-intercept linear regression model (R2 = 0.984). However, the use of a single trait of length (L) and width (W) of the largest leaf within each cluster as a predictor in the power regression model exhibited moderately accurate prediction at the R2 = 0.883 and 0.724, respectively.

Sign in / Sign up

Export Citation Format

Share Document