scholarly journals A Study on Assimilation of CYGNSS Wind Speed Data for Tropical Convection during 2018 January MJO

2020 ◽  
Vol 12 (8) ◽  
pp. 1243 ◽  
Author(s):  
Xuanli Li ◽  
John R. Mecikalski ◽  
Timothy J. Lang
Keyword(s):  
Wind Speed ◽  
Tropical Cyclone ◽  
Data Assimilation ◽  
Positive Impact ◽  
Specular Reflection ◽  
Surface Wind ◽  
Wrf Model ◽  
Precipitation Forecast ◽  
Wind Speed Data ◽  
The Impact

The National Aeronautics and Space Administration (NASA) Cyclone Global Navigation Satellite System (CYGNSS) mission was launched in December 2016. CYGNSS provides ocean surface wind speed retrieval along specular reflection tracks at an interval resolution of approximately 25 km. With a median revisit time of 2.8 h covering a ±35° latitude, CYGNSS can provide more frequent and accurate measurements of surface wind over the tropical oceans under heavy precipitation, especially within tropical cyclone cores and deep convection regions, than traditional scatterometers. In this study, CYGNSS v2.1 Level 2 wind speed data were assimilated into the Weather Research and Forecasting (WRF) model using the WRF Data Assimilation (WRFDA) system with hybrid 3- and 4-dimensional variational ensemble technology. Case studies were conducted to examine the impact of the CYGNSS data on forecasts of tropical cyclone (TC) Irving and a westerly wind burst (WWB) during the Madden–Julian oscillation (MJO) event over the Indian Ocean in early January 2018. The results indicate a positive impact of the CYGNSS data on the wind field. However, the impact from the CYGNSS data decreases rapidly within 4 h after data assimilation. Also, the influence of CYGNSS data only on precipitation forecast is found to be limited. The assimilation of CYGNSS data was further explored with an additional experiment in which CYGNSS data was combined with Global Precipitation Mission (GPM) Integrated Multi-satellitE Retrievals for GPM (IMERG) hourly precipitation and Advanced Scatterometer (ASCAT) wind vector and were assimilated into the WRF model. A significant positive impact was found on the tropical cyclone intensity and track forecasts. The short-term forecast of wind and precipitation fields were also improved for both TC Irving and the WWB event when the combined satellite data was assimilated.

scholarly journals Understanding Ku-Band Ocean Radar Backscatter at Low Incidence Angles under Weak to Severe Wind Conditions by Comparison of Measurements and Models

2020 ◽  
Vol 12 (20) ◽  
pp. 3445
Author(s):  
Qiushuang Yan ◽  
Chenqing Fan ◽  
Jie Zhang ◽  
Junmin Meng
Keyword(s):  
Wind Speed ◽  
Wave Breaking ◽  
Scattering Theory ◽  
Specular Reflection ◽  
Incidence Angle ◽  
Surface Wind ◽  
Specular Scattering ◽  
Low Incidence ◽  
The Impact ◽  
Ku Band

The rain-free normalized radar cross-section (NRCS) measurements from the Ku-band precipitation radars (PRs) aboard the tropical rainfall measuring mission (TRMM) and the global precipitation measurement (GPM) mission, along with simultaneous sea surface wind truth from buoy observations, stepped-frequency microwave radiometer (SFMR) measurements, and H*Wind analyses, are used to investigate the abilities of the quasi-specular scattering models, i.e., the physical optics model (PO) and the classical and improved geometrical optics models (GO and GO4), to reproduce the Ku-band NRCS at low incidence angles of 0–18° over the wind speed range of 0–45 m/s. On this basis, the limitations of the quasi-specular scattering theory and the effects of wave breaking are discussed. The results show that the return caused by quasi-specular reflection is affected significantly by the presence of background swell waves at low winds. At moderate wind speeds of 5–15 m/s, the NRCS is still dominated by the quasi-specular reflection, and the wave breaking starts to work but its contribution is very small, thus, the models are found in excellent agreement with the measurements. With wind speed increasing, the impact of wave breaking increases, whereas the role of standard quasi-specular reflection decreases. The wave breaking impact on NRCS is first visible at incidence angles near 18° as wind speed exceeds about 20 m/s, then it becomes dominant when wind speed exceeds about 37 m/s where the NRCS is insensitive to wind speed and depends linearly on incidence angle, which cannot be explained by the standard quasi-specular scattering theory.

scholarly journals Assimilation of GPM-retrieved Ocean Surface Meteorology Data for Two Snowstorm Events during ICE-POP 2018

2021 ◽  
Author(s):  
Xuanli Li ◽  
Jason B. Roberts ◽  
Jayanthi Srikishen ◽  
Jonathan L. Case ◽  
Walter A. Petersen ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Positive Impact ◽  
Weather Prediction ◽  
Wrf Model ◽  
Field Research ◽  
Ocean Surface ◽  
Positive Influence ◽  
Precipitation Forecast ◽  
Specific Humidity ◽  
Wind Fields

Abstract. As a component of the National Aeronautics and Space Administration (NASA) Weather Focus Area and GPM Ground Validation participation in the International Collaborative Experiments for PyeongChang 2018 Olympic and Paralympic Winter Games (ICE-POP 2018) field research and forecast demonstration programs, hourly ocean surface meteorology properties were retrieved from the Global Precipitation Measurement (GPM) microwave observations for January – March 2018. In this study, the retrieved ocean surface meteorological products – 2-m temperature, 2-m specific humidity, and 10-m wind speed were assimilated into a regional numerical weather prediction (NWP) framework to explore the application of these observations for two heavy snowfall events during the ICE-POP 2018: 27–28 February, and 7–8 March 2018. The Weather Research and Forecasting (WRF) model and the community Gridpoint Statistical Interpolation (GSI) were used to conduct high resolution simulations and data assimilation experiments. The results indicate that the data assimilation has a large influence on surface thermodynamic and wind fields in the model initial condition for both events. With cycled data assimilation, positive influence of the retrieved surface observation was found for the March case with improved quantitative precipitation forecast and reduced error in temperature forecast. A slightly smaller yet positive impact was also found in the forecast of the February case.

scholarly journals Numerical Simulation of Near-Surface Wind during a Severe Wind Event in a Complex Terrain by Multisource Data Assimilation and Dynamic Downscaling

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
De Zhang ◽  
Luyuan Chen ◽  
Feimin Zhang ◽  
Juan Tan ◽  
Chenghai Wang
Keyword(s):  
Wind Speed ◽  
Data Assimilation ◽  
Surface Wind ◽  
Wrf Model ◽  
Surface Wind Speed ◽  
Dynamic Downscaling ◽  
Near Surface ◽  
Wind Event ◽  
Weak Wind

Accurate forecast and simulation of near-surface wind is a great challenge for numerical weather prediction models due to the significant transient and intermittent nature of near-surface wind. Based on the analyses of the impact of assimilating in situ and Advanced Tiros Operational Vertical Sounder (ATOVS) satellite radiance data on the simulation of near-surface wind during a severe wind event, using the new generation mesoscale Weather Research and Forecasting (WRF) model and its three-dimensional variational (3DVAR) data assimilation system, the dynamic downscaling of near-surface wind is further investigated by coupling the microscale California Meteorological (CALMET) model with the WRF and its 3DVAR system. Results indicate that assimilating in situ and ATOVS radiance observations strengthens the airflow across the Alataw valley and triggers the downward transport of momentum from the upper atmosphere in the downstream area of the valley in the initial conditions, thus improving near-surface wind simulations. Further investigations indicate that the CALMET model provides more refined microtopographic structures than the WRF model in the vicinity of the wind towers. Although using the CALMET model achieves the best simulation of near-surface wind through dynamic downscaling of the output from the WRF and its 3DVAR assimilation, the simulation improvements of near-surface wind speed are mainly within 1 m s−1. Specifically, the mean improvement proportions of near-surface wind speed are 64.8% for the whole simulation period, 58.7% for the severe wind period, 68.3% for the severe wind decay period, and 75.4% for the weak wind period. The observed near-surface wind directions in the weak wind conditions are better simulated in the coupled model with CALMET downscaling than in the WRF and its 3DVAR system. It is concluded that the simulation improvements of CALMET downscaling are distinct when near-surface winds are weak, and the downscaling effects are mainly manifested in the simulation of near-surface wind directions.

scholarly journals Impact of 3DVAR Data Assimilation on the Prediction of Heavy Rainfall over Southern China

2013 ◽  
Vol 2013 ◽  
pp. 1-17 ◽  
Author(s):  
Tuanjie Hou ◽  
Fanyou Kong ◽  
Xunlai Chen ◽  
Hengchi Lei
Keyword(s):  
Data Assimilation ◽  
Heavy Rainfall ◽  
Positive Impact ◽  
Southern China ◽  
Precipitation Forecast ◽  
Radiosonde Data ◽  
Near Surface ◽  
Rainfall Events ◽  
Forecasting System ◽  
The Impact

This study examines the impact of three-dimensional variational data assimilation (3DVAR) on the prediction of two heavy rainfall events over Southern China by using a real-time storm-scale forecasting system. Initialized from the European Centre for Medium-Range Weather Forecasts (ECMWF) high-resolution data, the forecasting system is characterized by combining the Advanced Research Weather Research and Forecasting (WRF-ARW) model and the Advanced Regional Prediction System (ARPS) 3DVAR package. Observations from Doppler radars, surface Automatic Weather Station (AWS) network, and radiosondes are used in the experiments to evaluate the impact of data assimilation on short-term quantitative precipitation forecast (QPF) skill. Results suggest that extrasurface AWS data assimilation has slight but general positive impact on rainfall location forecasts. Surface AWS data also improve model results of near-surface variables. Radiosonde data assimilation improves the QPF skill by improving rainfall position accuracy and reducing rainfall overprediction. Compared with radar data, the overall impact of additional surface and radiosonde data is smaller and is reflected primarily in reducing rainfall overestimation. The assimilation of all radar, surface, and radiosonde data has a more positive impact on the forecast skill than the assimilation of either type of data only for the two rainfall events.

A comparison between 4D-VAR and cycling 3D-VAR methods for the simulation of a severe weather event in Central Italy. Preliminary results.

2020 ◽  
Author(s):  
Vincenzo Mazzarella ◽  
Rossella Ferretti
Keyword(s):  
Positive Impact ◽  
Central Italy ◽  
Wrf Model ◽  
Severe Weather ◽  
Precipitation Forecast ◽  
Mountain Range ◽  
Weather Event ◽  
Maximum Rainfall ◽  
The Impact ◽  
Severe Weather Event

<p>Nowadays, the use of 4D-VAR assimilation technique has been investigated in several scientific papers with the aim of improving the localization and timing of precipitation in complex orography regions. The results show the positive impact in rainfall forecast but, the need to resolve the tangent linear and adjoint model makes the 4D-VAR computationally too expensive. Hence, it is used in operationally only in large forecast centres. To the aim of exploring a more reasonable method, a comparison between a cycling 3D-VAR, that needs less computational resources, and 4D-VAR techniques is performed for a severe weather event occurred in Central Italy. A cut-off low (992 hPa), located in western side of Sicily region, was associated with a strong south-easterly flow over Central Adriatic region, which supplied a large amount of warm and moist air. This mesoscale configuration, coupled with the Apennines mountain range that further increased the air column instability, produced heavy rainfall in Abruzzo region (Central Italy).</p><p>The numerical simulations are carried out using the Weather Research and Forecasting (WRF) model. In-situ surface and upper-air observations are assimilated in combination with radar reflectivity and radial velocity data over a high-resolution domain. Several experiments have been performed in order to evaluate the impact of 4D-VAR and cycling 3D-VAR in the precipitation forecast. In addition, a statistical analysis has been carried out to objectively compare the simulations. Two different verification approaches are used: Receiver Operating Characteristic (ROC) curve and Fraction Skill Score (FSS). Both statistical scores are calculated for different threshold values in the study area and in the sub-regions where the maximum rainfall occurred.</p>

scholarly journals Impact of Assimilating China Precipitation Analysis Data Merging with Remote Sensing Products Using the 4DVar Method on the Prediction of Heavy Rainfall

2019 ◽  
Vol 11 (8) ◽  
pp. 973 ◽  
Author(s):  
Yuanbing Wang ◽  
Yaodeng Chen ◽  
Jinzhong Min
Keyword(s):  
Data Assimilation ◽  
Heavy Rainfall ◽  
Weather Prediction ◽  
Eastern China ◽  
Wrf Model ◽  
Analysis Data ◽  
Precipitation Forecast ◽  
Limited Area ◽  
Precipitation Analysis ◽  
The Impact

In this study, the China Hourly Merged Precipitation Analysis (CHMPA) data which combines the satellite-retrieved Climate Prediction Center Morphing (CMORPH) with the automatic weather station precipitation observations is firstly assimilated into the Weather Research and Forecasting (WRF) model using the Four-Dimensional Variational (4DVar) method. The analyses and subsequent forecasts of heavy rainfall during Meiyu season occurred in July 2013 over eastern China is evaluated. Besides, the sensitivity of rainfall forecast skill of assimilating the CHMPA data to the rainfall error, the rainfall thinning distance, and the rainfall accumulation time within assimilation window are investigated in this study. Then, the impact of 4DVar data assimilation with and without CHMPA rainfall data is evaluated to show how the assimilation of CHMPA impacts the precipitation simulations. It is found that assimilation of the CHMPA data helps to produce a better short-range precipitation forecast in this study. The rainfall fields after assimilation of CHMPA is closer to observations in terms of quantity and pattern. However, the leading time of improved forecast is limited to about 18 hours. It is also found that CHMPA data assimilation produces stronger realistic moisture divergence, precipitabale water field and the vertical wind field in the forecasting fields, which eventually contributes to the improved forecast of heavy rainfall. This study can provide references for the assimilation of CHMPA data into the WRF model using 4DVar, which is valuable for limited-area numerical weather prediction and hydrological applications.

scholarly journals Applying Satellite Data Assimilation to Wind Simulation of Coastal Wind Farms in Guangdong, China

2020 ◽  
Vol 12 (6) ◽  
pp. 973
Author(s):  
Wenqing Xu ◽  
Like Ning ◽  
Yong Luo
Keyword(s):  
Wind Speed ◽  
Data Assimilation ◽  
Satellite Data ◽  
Surface Wind ◽  
Wrf Model ◽  
Wind Farms ◽  
Resource Assessment ◽  
Near Surface ◽  
Wind Resource Assessment ◽  
Wind Resource

With the development of the wind power industry in China, accurate simulation of near-surface wind plays an important role in wind-resource assessment. Numerical weather prediction (NWP) models have been widely used to simulate the near-surface wind speed. By combining the Weather Research and Forecast (WRF) model with the Three-dimensional variation (3DVar) data assimilation system, our work applied satellite data assimilation to the wind resource assessment tasks of coastal wind farms in Guangdong, China. We compared the simulation results with wind speed observation data from seven wind observation towers in the Guangdong coastal area, and the results showed that satellite data assimilation with the WRF model can significantly reduce the root-mean-square error (RMSE) and improve the index of agreement (IA) and correlation coefficient (R). In different months and at different height layers (10, 50, and 70 m), the Root-Mean-Square Error (RMSE) can be reduced by a range of 0–0.8 m/s from 2.5–4 m/s of the original results, the IA can be increased by a range of 0–0.2 from 0.5–0.8 of the original results, and the R can be increased by a range of 0–0.3 from 0.2–0.7 of the original results. The results of the wind speed Weibull distribution show that, after data assimilation was used, the WRF model was able to simulate the distribution of wind speed more accurately. Based on the numerical simulation, our work proposes a combined wind resource evaluation approach of numerical modeling and data assimilation, which will benefit the wind power assessment of wind farms.

scholarly journals Assessing the Impact of GNSS ZTD Data Assimilation into the WRF Modeling System during High-Impact Rainfall Events over Greece

2020 ◽  
Vol 12 (3) ◽  
pp. 383 ◽  
Author(s):  
Christos Giannaros ◽  
Vassiliki Kotroni ◽  
Konstantinos Lagouvardos ◽  
Theodore M. Giannaros ◽  
Christos Pikridas
Keyword(s):  
Data Assimilation ◽  
Time Window ◽  
Positive Impact ◽  
High Impact ◽  
Global Navigation Satellite Systems ◽  
Precipitation Forecast ◽  
Convective Precipitation ◽  
Tropospheric Delay ◽  
The Impact ◽  
Precipitation Events

The derivation of global navigation satellite systems (GNSSs) tropospheric products is nowadays a state-of-the-art technique that serves both research and operational needs in a broad range of applications in meteorology. In particular, GNSS zenith tropospheric delay (ZTD) data assimilation is widely applied in Europe to enhance numerical weather predictions (NWPs). The current study presents the first attempt at introducing assimilation of ZTDs, derived from more than 48 stations of the Hellenic GNSS network, into the operational NWP system of the National Observatory of Athens (NOA) in Greece, which is based on the mesoscale Weather Research and Forecasting (WRF) model. WRF was applied during seven high-impact precipitation events covering the dry and wet season of 2018. The simulation employing the ZTD data assimilation reproduces more accurately, compared to the control experiment, the observed heavy rainfall (especially for high precipitation events, exceeding 20 mm in 24h) during both dry and wet periods. Assimilating ZTDs also improves the simulation of intense (>20 mm) convective precipitation during the time window of its occurrence in the dry season, and provides a beneficial influence during synoptic-scale events in the wet period. The above results, which are statistically significant, highlight an important positive impact of ZTD assimilation on the model’s precipitation forecast skill over Greece. Overall, the modelling system’s configuration, including the assimilation of ZTD observations, satisfactorily captures the spatial and temporal distribution of the observed rainfall and can therefore be used as the basis for examining further improvements in the future.

scholarly journals Data assimilation of radar reflectivity volumes in a LETKF scheme

2018 ◽  
Vol 25 (4) ◽  
pp. 747-764 ◽  
Author(s):  
Thomas Gastaldo ◽  
Virginia Poli ◽  
Chiara Marsigli ◽  
Pier Paolo Alberoni ◽  
Tiziana Paccagnella
Keyword(s):  
Data Assimilation ◽  
Positive Impact ◽  
Weather Prediction ◽  
Forecast Accuracy ◽  
Skill Score ◽  
Radar Reflectivity ◽  
Precipitation Forecast ◽  
Small Scale ◽  
Observational Error ◽  
The Impact

Abstract. Quantitative precipitation forecast (QPF) is still a challenge for numerical weather prediction (NWP), despite the continuous improvement of models and data assimilation systems. In this regard, the assimilation of radar reflectivity volumes should be beneficial, since the accuracy of analysis is the element that most affects short-term QPFs. Up to now, few attempts have been made to assimilate these observations in an operational set-up, due to the large amount of computational resources needed and due to several open issues, like the rise of imbalances in the analyses and the estimation of the observational error. In this work, we evaluate the impact of the assimilation of radar reflectivity volumes employing a local ensemble transform Kalman filter (LETKF), implemented for the convection-permitting model of the COnsortium for Small-scale MOdelling (COSMO). A 4-day test case on February 2017 is considered and the verification of QPFs is performed using the fractions skill score (FSS) and the SAL technique, an object-based method which allows one to decompose the error in precipitation fields in terms of structure (S), amplitude (A) and location (L). Results obtained assimilating both conventional data and radar reflectivity volumes are compared to those of the operational system of the Hydro-Meteo-Climate Service of the Emilia-Romagna Region (Arpae-SIMC), in which only conventional observations are employed and latent heat nudging (LHN) is applied using surface rainfall intensity (SRI) estimated from the Italian radar network data. The impact of assimilating reflectivity volumes using LETKF in combination or not with LHN is assessed. Furthermore, some sensitivity tests are performed to evaluate the effects of the length of the assimilation window and of the reflectivity observational error (roe). Moreover, balance issues are assessed in terms of kinetic energy spectra and providing some examples of how these affect prognostic fields. Results show that the assimilation of reflectivity volumes has a positive impact on QPF accuracy in the first few hours of forecast, both when it is combined with LHN or not. The improvement is further slightly enhanced when only observations collected close to the analysis time are assimilated, while the shortening of cycle length worsens QPF accuracy. Finally, the employment of too small a value of roe introduces imbalances into the analyses, resulting in a severe degradation of forecast accuracy, especially when very short assimilation cycles are used.

scholarly journals Concentric Eyewall Formation in Typhoon Sinlaku (2008). Part I: Assimilation of T-PARC Data Based on the Ensemble Kalman Filter (EnKF)

2012 ◽  
Vol 140 (2) ◽  
pp. 506-527 ◽  
Author(s):  
Chun-Chieh Wu ◽  
Yi-Hsuan Huang ◽  
Guo-Yuan Lien
Keyword(s):  
Kalman Filter ◽  
Data Assimilation ◽  
Ensemble Kalman Filter ◽  
Surface Wind ◽  
Measurement Data ◽  
Wrf Model ◽  
Weather Research And Forecasting ◽  
Secondary Eyewall Formation ◽  
Wind Structure ◽  
The Impact

Typhoon Sinlaku (2008) is a case in point under The Observing System Research and Predictability Experiment (THORPEX) Pacific Asian Regional Campaign (T-PARC) with the most abundant flight observations taken and with great potential to address major scientific issues in T-PARC such as structure change, targeted observations, and extratropical transition. A new method for vortex initialization based on ensemble Kalman filter (EnKF) data assimilation and the Weather Research and Forecasting (WRF) model is adopted in this study. By continuously assimilating storm positions (with an update cycle every 30 min), the mean surface wind structure, and all available measurement data, this study constructs a unique high-spatial/temporal-resolution and model/observation-consistent dataset for Sinlaku during a 4-day period. Simulations of Sinlaku starting at different initial times are further investigated to assess the impact of the data. It is striking that some of the simulations are able to capture Sinlaku’s secondary eyewall formation, while others starting the simulation earlier with less data assimilated are not. This dataset provides a unique opportunity to study the dynamical processes of concentric eyewall formation in Sinlaku. In Part I of this work, results from the data assimilation and simulations are presented, including concentric eyewall evolution and the precursors to its formation, while detailed dynamical analyses are conducted in follow-up research.

Sign in / Sign up

Export Citation Format

Share Document