scholarly journals Quantifying Flood Water Levels Using Image-Based Volunteered Geographic Information

2020 ◽  
Vol 12 (4) ◽  
pp. 706 ◽  
Author(s):  
Yan-Ting Lin ◽  
Ming-Der Yang ◽  
Jen-Yu Han ◽  
Yuan-Fong Su ◽  
Jiun-Huei Jang
Keyword(s):  
Image Processing ◽  
Random Forest ◽  
Digital Image Processing ◽  
Digital Image ◽  
Environmental Changes ◽  
Volunteered Geographic Information ◽  
Geographic Information ◽  
Water Levels ◽  
Mapping Technique ◽  
Photogrammetric Method

Many people use smartphone cameras to record their living environments through captured images, and share aspects of their daily lives on social networks, such as Facebook, Instagram, and Twitter. These platforms provide volunteered geographic information (VGI), which enables the public to know where and when events occur. At the same time, image-based VGI can also indicate environmental changes and disaster conditions, such as flooding ranges and relative water levels. However, little image-based VGI has been applied for the quantification of flooding water levels because of the difficulty of identifying water lines in image-based VGI and linking them to detailed terrain models. In this study, flood detection has been achieved through image-based VGI obtained by smartphone cameras. Digital image processing and a photogrammetric method were presented to determine the water levels. In digital image processing, the random forest classification was applied to simplify ambient complexity and highlight certain aspects of flooding regions, and the HT-Canny method was used to detect the flooding line of the classified image-based VGI. Through the photogrammetric method and a fine-resolution digital elevation model based on the unmanned aerial vehicle mapping technique, the detected flooding lines were employed to determine water levels. Based on the results of image-based VGI experiments, the proposed approach identified water levels during an urban flood event in Taipei City for demonstration. Notably, classified images were produced using random forest supervised classification for a total of three classes with an average overall accuracy of 88.05%. The quantified water levels with a resolution of centimeters (<3-cm difference on average) can validate flood modeling so as to extend point-basis observations to area-basis estimations. Therefore, the limited performance of image-based VGI quantification has been improved to help in flood disasters. Consequently, the proposed approach using VGI images provides a reliable and effective flood-monitoring technique for disaster management authorities.

scholarly journals Mapeamento das áreas verdes nos loteamentos urbanos do município de Goiânia-GO Brasil: uma análise espacial da conduta legislativa

2020 ◽  
pp. 105-121
Author(s):  
Fabrizia Nunes ◽  
◽  
Alex Santos ◽  
Helci Ramos ◽  
Rodrigo Santos ◽  
...  
Keyword(s):  
Image Processing ◽  
Information System ◽  
Geographic Information System ◽  
Digital Image Processing ◽  
Digital Image ◽  
Geographic Information ◽  
Master Plan ◽  
Federal Law ◽  
Future Scenario ◽  
Green Areas

Article measures the distribution of green areas within the subdivisions of the municipality of Goiânia. It aims to verify if the regulation presented in Federal Law 6.766/1979, which regulates the Parcelamento do solo urbano it is being fulfilled with regard to the reservation of at least 10% of the total subdivision for the green and leisure areas. This is mainly an observation for a future scenario, there is an expectation of reducing the metric to 7.5%, to be provided for in the draft law of the New Master Plan. To obtain the data, techniques of Digital Image Processing and analyzing with Geographic Information System were applied. The results were surprising, because of the 1.089 subdivisions analyzed, 512 allotments, equivalent to 47.02% of the area, have coverage of green and leisure areas, less than 10%, thus, not complying with the current regulations provided for in the legislation. For new the 7.5% metric, this number reduces to 458, which may compromise the losses of 2.1 km² of these spaces.

An Overview of Digital Image Processing and Recognition (Invited Paper)

1982 ◽  
Vol 40 ◽  
pp. 700-702
Author(s):  
R. C. Gonzalez
Keyword(s):  
Image Processing ◽  
New York ◽  
Digital Image Processing ◽  
Digital Image ◽  
Practical Implementation ◽  
Submarine Cable ◽  
Vigorous Growth ◽  
Digitized Pictures ◽  
Processing Techniques ◽  
And Storage

Interest in digital image processing techniques dates back to the early 1920's, when digitized pictures of world news events were first transmitted by submarine cable between New York and London. Applications of digital image processing concepts, however, did not become widespread until the middle 1960's, when third-generation digital computers began to offer the speed and storage capabilities required for practical implementation of image processing algorithms. Since then, this area has experienced vigorous growth, having been a subject of interdisciplinary research in fields ranging from engineering and computer science to biology, chemistry, and medicine.

A method to measure pores and fissures in geologic materials under S.E.M. by digital image processing

1978 ◽  
Vol 36 (1) ◽  
pp. 212-213
Author(s):  
L. Montoto ◽  
M. Montoto ◽  
A. Bel-Lan
Keyword(s):  
Image Processing ◽  
Optical Microscopy ◽  
Digital Image Processing ◽  
Digital Image ◽  
Digital Processing ◽  
Free Surfaces ◽  
Geologic Materials ◽  
Automatic Information ◽  
Detector Output ◽  
Rock Specimens

INTRODUCTION.- The physical properties of rock masses are greatly influenced by their internal discontinuities, like pores and fissures. So, these need to be measured as a basis for interpretation. To avoid the basic difficulties of measurement under optical microscopy and analogic image systems, the authors use S.E.M. and multiband digital image processing. In S.E.M., analog signal processing has been used to further image enhancement (1), but automatic information extraction can be achieved by simple digital processing of S.E.M. images (2). The use of multiband image would overcome difficulties such as artifacts introduced by the relative positions of sample and detector or the typicals encountered in optical microscopy.DIGITAL IMAGE PROCESSING.- The studied rock specimens were in the form of flat deformation-free surfaces observed under a Phillips SEM model 500. The SEM detector output signal was recorded in picture form in b&w negatives and digitized using a Perkin Elmer 1010 MP flat microdensitometer.

Digital image processing methods applied to the study of annealing time on semiconductor-metal eutectic composites

1988 ◽  
Vol 46 ◽  
pp. 848-849
Author(s):  
J. Hefter
Keyword(s):  
Image Processing ◽  
Digital Image Processing ◽  
Digital Image ◽  
Electronic Device ◽  
Processing System ◽  
Average Diameter ◽  
Eutectic Solidification ◽  
Metal Silicide ◽  
The Matrix ◽  
Microscopic Studies

Semiconductor-metal composites, formed by the eutectic solidification of silicon and a metal silicide have been under investigation for some time for a number of electronic device applications. This composite system is comprised of a silicon matrix containing extended metal-silicide rod-shaped structures aligned in parallel throughout the material. The average diameter of such a rod in a typical system is about 1 μm. Thus, characterization of the rod morphology by electron microscope methods is necessitated.The types of morphometric information that may be obtained from such microscopic studies coupled with image processing are (i) the area fraction of rods in the matrix, (ii) the average rod diameter, (iii) an average circularity (roundness), and (iv) the number density (Nd;rods/cm2). To acquire electron images of these materials, a digital image processing system (Tracor Northern 5500/5600) attached to a JEOL JXA-840 analytical SEM has been used.

Complementary Z-Contrast Imaging and Digital Image Processing

1985 ◽  
Vol 43 ◽  
pp. 304-305
Author(s):  
K. N. Colonna ◽  
G. Oliphant
Keyword(s):  
Image Processing ◽  
Heavy Metal ◽  
Digital Image Processing ◽  
Digital Image ◽  
Biological Tissue ◽  
Biological Imaging ◽  
Tissue Preparation ◽  
Contrast Imaging ◽  
Imaging Tool ◽  
Z Contrast

Harmonious use of Z-contrast imaging and digital image processing as an analytical imaging tool was developed and demonstrated in studying the elemental constitution of human and maturing rabbit spermatozoa. Due to its analog origin (Fig. 1), the Z-contrast image offers information unique to the science of biological imaging. Despite the information and distinct advantages it offers, the potential of Z-contrast imaging is extremely limited without the application of techniques of digital image processing. For the first time in biological imaging, this study demonstrates the tremendous potential involved in the complementary use of Z-contrast imaging and digital image processing.Imaging in the Z-contrast mode is powerful for three distinct reasons, the first of which involves tissue preparation. It affords biologists the opportunity to visualize biological tissue without the use of heavy metal fixatives and stains. For years biologists have used heavy metal components to compensate for the limited electron scattering properties of biological tissue.

Sign in / Sign up

Export Citation Format

Share Document