scholarly journals Estimating Forest Canopy Height Using MODIS BRDF Data Emphasizing Typical-Angle Reflectances

2019 ◽  
Vol 11 (19) ◽  
pp. 2239 ◽  
Author(s):  
Lei Cui ◽  
Ziti Jiao ◽  
Yadong Dong ◽  
Mei Sun ◽  
Xiaoning Zhang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Forest Canopy ◽  
Forest Biomass ◽  
Canopy Height ◽  
Validation Data ◽  
Climate Change Research ◽  
Auxiliary Data ◽  
Moderate Resolution ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Imaging Sensor

Forest-canopy height is an important parameter for the estimation of forest biomass and terrestrial carbon flux and climate-change research at regional and global scales. Currently, various methods combining Light Detection and Ranging (LiDAR) data with various auxiliary data, particularly satellite remotely sensed reflectances, have been widely used to produce spatially continuous canopy-height products. However, current methods in use for remote sensing reflectances mainly focus on the nadir view direction, while anisotropic reflectances, which are theoretically more sensitive to the forest canopy height in the multiangle remote sensing field, have rarely been explored. Here, we attempted to examine the potential of using modeled multiangle reflectances at three typical viewing angles (i.e., from the hotspot, darkspot, and nadir directions) to estimate forest-canopy height as auxiliary data sources. First, the sensitivities of the typical angular reflectances as a function of forest canopy height were fully examined using the Extended Fourier Amplitude Sensitivity Test (EFAST) method based on the 4-scale Bidirectional Reflectance Distribution Function (BRDF) model simulations. This indicated that reflectances in the off-nadir viewing directions are generally sensitive to canopy-height variations. Then, the canopy heights were extracted from airborne Laser Vegetation Imaging Sensor (LVIS) data, which were further divided into training and validation data. Moderate Resolution Imaging Spectroradiometer (MODIS) multiangle reflectances at typical viewing angles were calculated from the MODIS BRDF parameter product (MCD43A1, version 6) as partial training-input data, based on a hotspot-adjusted, kernel-driven linear BRDF model. Subsequently, the Random Forest (RF) machine learning model was trained to acquire the relationship between the extracted canopy heights and the corresponding MODIS typical viewing reflectances. The trained model was further applied to estimate the canopy height metrics in the study areas of Howland Forest, Harvard Forest, and Bartlett Forest. Finally, the estimated canopy heights were independently validated by canopy heights extracted from the LVIS data. The results indicate that the canopy heights modeled through this method exhibit generally high accordance with the LVIS-derived canopy heights (R = 0.65−0.67; RMSE = 3.63−5.78). The results suggest that the MODIS multiangle reflectance data at typical observation angles contain important information regarding forest canopy height and can, therefore, be used to estimate forest canopy height for various ecological applications.

scholarly journals Evaluation of the Simard et al. 2011 Global Canopy Height Map in Boreal Forests

2020 ◽  
Vol 12 (7) ◽  
pp. 1114
Author(s):  
Wei Yang ◽  
Akihiko Kondoh
Keyword(s):  
Boreal Forests ◽  
Forest Canopy ◽  
Spatial Separation ◽  
Canopy Height ◽  
Tree Cover ◽  
Data Sets ◽  
Data Set ◽  
Moderate Resolution ◽  
Resolution Imaging ◽  
Moderate Resolution Imaging Spectroradiometer

Light detection and ranging (LiDAR) provides a state-of-the-art technique for measuring forest canopy height. Nevertheless, it may miss some forests due to its spatial separation of individual spots. A number of efforts have been made to overcome the limitation of global LiDAR datasets to generate wall-to-wall canopy height products, among which a global satellite product produced by Simard et al. (2011) (henceforth, the Simard-map) has been the most widely applied. However, the accuracy of the Simard-map is uncertain in boreal forests, which play important roles in the terrestrial carbon cycle and are encountering more extensive climate changes than the global average. In this letter, we evaluated the Simard-map in boreal forests through a literature review of field canopy height. Our comparison shows that the Simard-map yielded a significant correlation with the field canopy height (R2 = 0.68 and p < 0.001). However, remarkable biases were observed with the root mean square error (RMSE), regression slope, and intercept of 6.88 m, 0.448, and 10.429, respectively. Interestingly, we found that the evaluation results showed an identical trend with a validation of moderate-resolution imaging spectroradiometer (MODIS) tree-cover product (MOD44B) in boreal forests, which was used as a crucial input data set for generating the Simard-map. That is, both the Simard-map and MOD44B yielded an overestimation (underestimation) in the lower (upper) tails of the scatterplots between the field and satellite data sets. This indicates that the MOD44B product is the likely source of error for the estimation biases of the Simard-map. Finally, a field calibration was performed to improve the Simard-map in boreal forests by compensating for the estimation biases and discarding non-forest areas, which provided a more reliable canopy height product for future applications.

scholarly journals Development of a remote sensing-based rice yield forecasting model

2016 ◽  
Vol 14 (3) ◽  
pp. e0907 ◽  
Author(s):  
Mostafa K. Mosleh ◽  
Quazi K. Hassan ◽  
Ehsan H. Chowdhury
Keyword(s):  
Remote Sensing ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Rice Yield ◽  
Decision Makers ◽  
Coefficient Of Determination ◽  
Moderate Resolution ◽  
Resolution Imaging ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Boro Rice

This study aimed to develop a remote sensing-based method for forecasting rice yield by considering vegetation greenness conditions during initial and peak greenness stages of the crop; and implemented for “boro” rice in Bangladeshi context. In this research, we used Moderate Resolution Imaging Spectroradiometer (MODIS)-derived two 16-day composite of normalized difference vegetation index (NDVI) images at 250 m spatial resolution acquired during the initial (January 1 to January 16) and peak greenness (March 23/24 to April 6/7 depending on leap year) stages in conjunction with secondary datasets (i.e., boro suitability map, and ground-based information) during 2007-2012 period. The method consisted of two components: (i) developing a model for delineating area under rice cultivation before harvesting; and (ii) forecasting rice yield as a function of NDVI. Our results demonstrated strong agreements between the model (i.e., MODIS-based) and ground-based area estimates during 2010-2012 period, i.e., coefficient of determination (R2); root mean square error (RMSE); and relative error (RE) in between 0.93 to 0.95; 30,519 to 37,451 ha; and ±10% respectively at the 23 district-levels. We also found good agreements between forecasted (i.e., MODIS-based) and ground-based yields during 2010-2012 period (R2 between 0.76 and 0.86; RMSE between 0.21 and 0.29 Mton/ha, and RE between -5.45% and 6.65%) at the 23 district-levels. We believe that our developments of forecasting the boro rice yield would be useful for the decision makers in addressing food security in Bangladesh.

scholarly journals Canopy Height Estimation Using Sentinel Series Images through Machine Learning Models in a Mangrove Forest

2020 ◽  
Vol 12 (9) ◽  
pp. 1519 ◽  
Author(s):  
Sujit Madhab Ghosh ◽  
Mukunda Dev Behera ◽  
Somnath Paramanik
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Forest Canopy ◽  
Canopy Height ◽  
Series Data ◽  
Learning Models ◽  
Biophysical Parameters ◽  
Height Estimation ◽  
Area Index ◽  
Machine Learning Models

Canopy height serves as a good indicator of forest carbon content. Remote sensing-based direct estimations of canopy height are usually based on Light Detection and Ranging (LiDAR) or Synthetic Aperture Radar (SAR) interferometric data. LiDAR data is scarcely available for the Indian tropics, while Interferometric SAR data from commercial satellites are costly. High temporal decorrelation makes freely available Sentinel-1 interferometric data mostly unsuitable for tropical forests. Alternatively, other remote sensing and biophysical parameters have shown good correlation with forest canopy height. The study objective was to establish and validate a methodology by which forest canopy height can be estimated from SAR and optical remote sensing data using machine learning models i.e., Random Forest (RF) and Symbolic Regression (SR). Here, we analysed the potential of Sentinel-1 interferometric coherence and Sentinel-2 biophysical parameters to propose a new method for estimating canopy height in the study site of the Bhitarkanika wildlife sanctuary, which has mangrove forests. The results showed that interferometric coherence, and biophysical variables (Leaf Area Index (LAI) and Fraction of Vegetation Cover (FVC)) have reasonable correlation with canopy height. The RF model showed a Root Mean Squared Error (RMSE) of 1.57 m and R2 value of 0.60 between observed and predicted canopy heights; whereas, the SR model through genetic programming demonstrated better RMSE and R2 values of 1.48 and 0.62 m, respectively. The SR also established an interpretable model, which is not possible via any other machine learning algorithms. The FVC was found to be an essential variable for predicting forest canopy height. The canopy height maps correlated with ICESat-2 estimated canopy height, albeit modestly. The study demonstrated the effectiveness of Sentinel series data and the machine learning models in predicting canopy height. Therefore, in the absence of commercial and rare data sources, the methodology demonstrated here offers a plausible alternative for forest canopy height estimation.

Sign in / Sign up

Export Citation Format

Share Document