scholarly journals Remote Sensing of Explosives-Induced Stress in Plants: Hyperspectral Imaging Analysis for Remote Detection of Unexploded Threats

2019 ◽  
Vol 11 (15) ◽  
pp. 1827 ◽  
Author(s):  
Paul V. Manley ◽  
Vasit Sagan ◽  
Felix B. Fritschi ◽  
Joel G. Burken
Keyword(s):  
Remote Sensing ◽  
Hyperspectral Imaging ◽  
Vegetation Index ◽  
Near Infrared ◽  
Imaging System ◽  
Principal Component ◽  
Field Capacity ◽  
Remotely Sensed ◽  
Control Group ◽  
Red Edge

Explosives contaminate millions of hectares from various sources (partial detonations, improper storage, and release from production and transport) that can be life-threatening, e.g., landmines and unexploded ordnance. Exposure to and uptake of explosives can also negatively impact plant health, and these factors can be can be remotely sensed. Stress induction was remotely sensed via a whole-plant hyperspectral imaging system as two genotypes of Zea mays, a drought-susceptible hybrid and a drought-tolerant hybrid, and a forage Sorghum bicolor were grown in a greenhouse with one control group, one group maintained at 60% soil field capacity, and a third exposed to 250 mg kg−1 Royal Demolition Explosive (RDX). Green-Red Vegetation Index (GRVI), Photochemical Reflectance Index (PRI), Modified Red Edge Simple Ratio (MRESR), and Vogelmann Red Edge Index 1 (VREI1) were reduced due to presence of explosives. Principal component analyses of reflectance indices separated plants exposed to RDX from control and drought plants. Reflectance of Z. mays hybrids was increased from RDX in green and red wavelengths, while reduced in near-infrared wavelengths. Drought Z. mays reflectance was lower in green, red, and NIR regions. S. bicolor grown with RDX reflected more in green, red, and NIR wavelengths. The spectra and their derivatives will be beneficial for developing explosive-specific indices to accurately identify plants in contaminated soil. This study is the first to demonstrate potential to delineate subsurface explosives over large areas using remote sensing of vegetation with aerial-based hyperspectral systems.

A Hyperspectral Imaging System for Identification of Faecal and Ingesta Contamination on Poultry Carcasses

2003 ◽  
Vol 11 (4) ◽  
pp. 269-281 ◽  
Author(s):  
Kurt C. Lawrence ◽  
William R. Windham ◽  
Bosoon Park ◽  
R. Jeff Buhr
Keyword(s):  
Real Time ◽  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Imaging System ◽  
Principal Component ◽  
Ccd Camera ◽  
Sample Population ◽  
Multivariate System ◽  
Ratio Image ◽  
On Line

A method and system for detecting faecal and ingesta contaminants on poultry carcasses were demonstrated. A visible/near infrared monochromator, which measured reflectance and principal component analysis were first used to identify key wavelengths from faecal and uncontaminated skin samples. Measurements at 434, 517, 565 and 628 nm were identified and used for evaluation with a hyperspectral imaging system. The hyperspectral imaging system, which was a line-scan (pushbroom) imaging system, consisted of a hyperspectral camera, fibre-optic line lights, a computer and frame grabber. The hyperspectral imaging camera consisted of a high-resolution charge coupled device (CCD) camera, a prism-grating-prism spectrograph, focusing lens, associated optical hardware and a motorised controller. The imaging system operated from about 400 to 900 nm. The hyperspectral imaging system was calibrated for wavelength, distance and percent reflectance and analysis of calibrated images at the key wavelengths indicated that single-wavelength images were inadequate for detecting contaminants. However, a ratio of images at two of the key wavelengths was able to identify faecal and ingesta contaminants. Specifically, the ratio of the 565-nm image divided by the 517-nm image produced good results. The ratio image was then further processed by masking the background and either enhancing the image contrast with a non-linear histogram stretch, or applying a faecal threshold. The results indicated that, for the limited sample population, more than 96% of the contaminants were detected. Thus, the hyperspectral imaging system was able to detect contaminants and showed feasibility, but was too slow for real-time on-line processing. Therefore, a multivariate system operating at 565 and 517 nm, which should be capable of operating at real-time on-line processing speed, should be used. Further research with such a system needs to be conducted.

scholarly journals Hyperspectral Imaging from a Multipurpose Floating Platform to Estimate Chlorophyll-a Concentrations in Irrigation Pond Water

2020 ◽  
Vol 12 (13) ◽  
pp. 2070
Author(s):  
Geonwoo Kim ◽  
Insuck Baek ◽  
Matthew D. Stocker ◽  
Jaclyn E. Smith ◽  
Andrew L. Van Tassell ◽  
...  
Keyword(s):  
Water Quality ◽  
Chlorophyll A ◽  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Imaging System ◽  
Principal Component ◽  
Hyperspectral Images ◽  
Water Sampling ◽  
Floating Platform ◽  
Irrigation Pond

This study provides detailed information about the use of a hyperspectral imaging system mounted on a motor-driven multipurpose floating platform (MFP) for water quality sensing and water sampling, including the spatial and spectral calibration for the camera, image acquisition and correction procedures. To evaluate chlorophyll-a concentrations in an irrigation pond, visible/near-infrared hyperspectral images of the water were acquired as the MFP traveled to ten water sampling locations along the length of the pond, and dimensionality reduction with correlation analysis was performed to relate the image data to the measured chlorophyll-a data. About 80,000 sample images were acquired by the line-scan method. Image processing was used to remove sun-glint areas present in the raw hyperspectral images before further analysis was conducted by principal component analysis (PCA) to extract three key wavelengths (662 nm, 702 nm, and 752 nm) for detecting chlorophyll-a in irrigation water. Spectral intensities at the key wavelengths were used as inputs to two near-infrared (NIR)-red models. The determination coefficients (R2) of the two models were found to be about 0.83 and 0.81. The results show that hyperspectral imagery from low heights can provide valuable information about water quality in a fresh water source.

scholarly journals Crop Type Classification Using Vegetation Indices of RapidEye Imagery

2014 ◽  
Vol XL-7 ◽  
pp. 195-198 ◽  
Author(s):  
M. Ustuner ◽  
F. B. Sanli ◽  
S. Abdikan ◽  
M. T. Esetlili ◽  
Y. Kurucu
Keyword(s):  
Remote Sensing ◽  
Classification Accuracy ◽  
Vegetation Index ◽  
Near Infrared ◽  
Normalized Difference Vegetation Index ◽  
Vegetation Indices ◽  
Support Vector ◽  
Red Edge ◽  
Crop Type ◽  
Type Classification

Cutting-edge remote sensing technology has a significant role for managing the natural resources as well as the any other applications about the earth observation. Crop monitoring is the one of these applications since remote sensing provides us accurate, up-to-date and cost-effective information about the crop types at the different temporal and spatial resolution. In this study, the potential use of three different vegetation indices of RapidEye imagery on crop type classification as well as the effect of each indices on classification accuracy were investigated. The Normalized Difference Vegetation Index (NDVI), the Green Normalized Difference Vegetation Index (GNDVI), and the Normalized Difference Red Edge Index (NDRE) are the three vegetation indices used in this study since all of these incorporated the near-infrared (NIR) band. RapidEye imagery is highly demanded and preferred for agricultural and forestry applications since it has red-edge and NIR bands. The study area is located in Aegean region of Turkey. Radial Basis Function (RBF) kernel was used here for the Support Vector Machines (SVMs) classification. Original bands of RapidEye imagery were excluded and classification was performed with only three vegetation indices. The contribution of each indices on image classification accuracy was also tested with single band classification. Highest classification accuracy of 87, 46 % was obtained using three vegetation indices. This obtained classification accuracy is higher than the classification accuracy of any dual-combination of these vegetation indices. Results demonstrate that NDRE has the highest contribution on classification accuracy compared to the other vegetation indices and the RapidEye imagery can get satisfactory results of classification accuracy without original bands.

scholarly journals Detection of Sulfite Dioxide Residue on the Surface of Fresh-Cut Potato Slices Using Near-Infrared Hyperspectral Imaging System and Portable Near-Infrared Spectrometer

Molecules ◽  
2020 ◽  
Vol 25 (7) ◽  
pp. 1651 ◽  
Author(s):  
Xiulin Bai ◽  
Qinlin Xiao ◽  
Lei Zhou ◽  
Yu Tang ◽  
Yong He
Keyword(s):  
Sulfur Dioxide ◽  
Hyperspectral Imaging ◽  
Classification Accuracy ◽  
Near Infrared ◽  
Imaging System ◽  
Principal Component ◽  
Support Vector ◽  
Svm Model ◽  
Fresh Cut ◽  
Potato Slices

Sodium pyrosulfite is a browning inhibitor used for the storage of fresh-cut potato slices. Excessive use of sodium pyrosulfite can lead to sulfur dioxide residue, which is harmful for the human body. The sulfur dioxide residue on the surface of fresh-cut potato slices immersed in different concentrations of sodium pyrosulfite solution was classified by near-infrared hyperspectral imaging (NIR-HSI) system and portable near-infrared (NIR) spectrometer. Principal component analysis was used to analyze the object-wise spectra, and support vector machine (SVM) model was established. The classification accuracy of calibration set and prediction set were 98.75% and 95%, respectively. Savitzky–Golay algorithm was used to recognize the important wavelengths, and SVM model was established based on the recognized important wavelengths. The final classification accuracy was slightly less than that based on the full spectra. In addition, the pixel-wise spectra extracted from NIR-HSI system could realize the visualization of different samples, and intuitively reflect the differences among the samples. The results showed that it was feasible to classify the sulfur dioxide residue on the surface of fresh-cut potato slices immersed in different concentration of sodium pyrosulfite solution by NIR spectra. It provided an alternative method for the detection of sulfur dioxide residue on the surface of fresh-cut potato slices.

scholarly journals NOVEL APPROACH FOR ESTIMATING NITROGEN CONTENT IN PADDY FIELDS USING LOW ALTITUDE REMOTE SENSING SYSTEM

2016 ◽  
Vol XLI-B1 ◽  
pp. 1011-1015 ◽  
Author(s):  
M. M. Saberioon ◽  
A. Gholizadeh
Keyword(s):  
Remote Sensing ◽  
Chlorophyll Content ◽  
Vegetation Index ◽  
Near Infrared ◽  
Digital Camera ◽  
Principal Component ◽  
Growth Stages ◽  
Plant Nitrogen ◽  
The Status ◽  
Low Altitude

Concerns over the use of nitrogen have been increasing due to the high cost of fertilizers and environmental pollutions caused by excess nitrogen application in agricultural fields. Several methods are available to assess the amount of nitrogen in crops, however, they are expensive, time-consuming, inaccurate, and/or require specialists to operate the tools. Researcher recently suggested remote sensing and specifically Low Altitude Remote Sensing (LARS) system of chlorophyll content in crop canopies as a low-cost alternative to estimate plant nitrogen status. The main objective of this study was to develop and test a new Vegetation Index (VI) to determine the status of nitrogen and chlorophyll content in rice leaf by analysing and considering all Visible (Vis) bands. Besides, capability of introduced VI has compared with all known VIs in both Vis and Near Infrared (NIR) bands in canopy scale. To develop the VI, images from 6-pannel leaf colour chart were acquired using Basler Scout scA640-70fc under light-emitting diode lighting, in which principal component analysis was used to retain the lower order principal component to develop a new index called IPCA. A conventional digital camera mounted to an Unmanned Aerial Vehicle (UAV) was also used to acquire images over the rice canopy in Vis bands. Simultaneously, Tetracam agriculture digital camera was employed to acquire rice canopy image in Vis-NIR bands. The results indicated that the proposed index at canopy (r = 0.78) scale could be used as a sensor to determine the status of chlorophyll content consequently for monitoring nitrogen in rice plant through different growth stages. Moreover, results confirmed that a lowcost LARS system would be suited for high spatial and temporal resolution images and data analysis for proper assessment of key nutrients in crop farming in a fast, inexpensive and non-destructive way.

scholarly journals NOVEL APPROACH FOR ESTIMATING NITROGEN CONTENT IN PADDY FIELDS USING LOW ALTITUDE REMOTE SENSING SYSTEM

2016 ◽  
Vol XLI-B1 ◽  
pp. 1011-1015 ◽  
Author(s):  
M. M. Saberioon ◽  
A. Gholizadeh
Keyword(s):  
Remote Sensing ◽  
Chlorophyll Content ◽  
Vegetation Index ◽  
Near Infrared ◽  
Digital Camera ◽  
Principal Component ◽  
Growth Stages ◽  
Plant Nitrogen ◽  
The Status ◽  
Low Altitude

Concerns over the use of nitrogen have been increasing due to the high cost of fertilizers and environmental pollutions caused by excess nitrogen application in agricultural fields. Several methods are available to assess the amount of nitrogen in crops, however, they are expensive, time-consuming, inaccurate, and/or require specialists to operate the tools. Researcher recently suggested remote sensing and specifically Low Altitude Remote Sensing (LARS) system of chlorophyll content in crop canopies as a low-cost alternative to estimate plant nitrogen status. The main objective of this study was to develop and test a new Vegetation Index (VI) to determine the status of nitrogen and chlorophyll content in rice leaf by analysing and considering all Visible (Vis) bands. Besides, capability of introduced VI has compared with all known VIs in both Vis and Near Infrared (NIR) bands in canopy scale. To develop the VI, images from 6-pannel leaf colour chart were acquired using Basler Scout scA640-70fc under light-emitting diode lighting, in which principal component analysis was used to retain the lower order principal component to develop a new index called IPCA. A conventional digital camera mounted to an Unmanned Aerial Vehicle (UAV) was also used to acquire images over the rice canopy in Vis bands. Simultaneously, Tetracam agriculture digital camera was employed to acquire rice canopy image in Vis-NIR bands. The results indicated that the proposed index at canopy (r = 0.78) scale could be used as a sensor to determine the status of chlorophyll content consequently for monitoring nitrogen in rice plant through different growth stages. Moreover, results confirmed that a lowcost LARS system would be suited for high spatial and temporal resolution images and data analysis for proper assessment of key nutrients in crop farming in a fast, inexpensive and non-destructive way.

scholarly journals Spectral Reflectance in Silver Birch Genotypes from Three Provenances in Finland

2020 ◽  
Vol 12 (17) ◽  
pp. 2677
Author(s):  
Maya Deepak ◽  
Sarita Keski-Saari ◽  
Laure Fauch ◽  
Lars Granlund ◽  
Elina Oksanen ◽  
...  
Keyword(s):  
Discriminant Analysis ◽  
Chlorophyll Content ◽  
Spectral Reflectance ◽  
Vegetation Index ◽  
Near Infrared ◽  
Normalized Difference Vegetation Index ◽  
Principal Component ◽  
Leaf Traits ◽  
Silver Birch ◽  
Red Edge

The goal of this study was to investigate the variation in the leaf spectral reflectance and its association with other leaf traits from 12 genotypes among three provenances of origin (populations) in a common garden for Finnish silver birch trees in 2015 and 2016. The spectral reflectance was measured in the laboratory from the detached leaves in the wavelength range of visible and near-infrared (VNIR, 400–1000 nm) and shortwave infrared (SWIR, 1000–2500 nm). The variation among the provenance was initially visualized with principal component analysis (PCA) and a clear separation among the provenances was detected with the discriminant analysis of principal components (DAPC) and partial least squares discriminant analysis (PLS-DA) depicting a less strong variation among the genotypes within the provenances. Wavelengths contributing to the separation of the genotypes and provenances were identified from the contribution plot of DAPC and the red edge was strongly related to the differences. Chlorophyll content showed clear provenance variation and was associated with the separation among the genotypes and provenances in the DAPC space. The normalized difference vegetation index (NDVI705,750) and chlorophyll reflectance index (CRI) showed clear significance among the provenances, whereas NDVI670,780 showed no variation. The variation in the chlorophyll content and the CRI and red edge-based NDVI indices indicated seasonal variation as the chlorophyll content starts increasing in early June. The correlation of foliar chlorophyll content and the chlorophyll-related spectral indices for the discrimination of provenances and genotypes are reported for the first time in a naturally occurring tree species consecutively for two years.

scholarly journals Crop distribution extraction based on Sentinel data

2021 ◽  
Vol 252 ◽  
pp. 02081
Author(s):  
Yu Liu ◽  
Xiaoping Wang ◽  
Jiaxin Qian
Keyword(s):  
Remote Sensing ◽  
Classification Accuracy ◽  
Vegetation Index ◽  
Insect Pests ◽  
Confusion Matrix ◽  
Plant Diseases ◽  
Control Group ◽  
Red Edge ◽  
Product Output ◽  
Radar Information

Remote sensing identification and classification of crops is the use of remote sensing for estimating crop planting area of timely and accurate monitoring of crop growth and plant diseases and insect pests in advance to make the product output to estimate the key and premise of the study using Sentinel-1 and Sentinel-2 satellite, by random forest algorithm, the traditional optical wavelengths and vegetation index The backward scattering field of red edge information and radar information in feature selection and feature classification, including winter wheat summer corn orchard woodland town water and bare land set three controls, such as the first group contains radar time characteristics, the characteristics of the second control group contains red edge long, the third group includes traditional vegetation index for phase characteristics, analyzed the different classification accuracy. The results from the confusion matrix show that the red edge band edge after index and the radar scattering information to join the crop classification accuracy is improved effectively. Sentinel optical and radar satellites with a time resolution of 5–6 days have great potential for crop monitoring research.

scholarly journals Spaceborne Estimation of Leaf Area Index in Cotton, Tomato, and Wheat Using Sentinel-2

Land ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 505
Author(s):  
Gregoriy Kaplan ◽  
Offer Rozenstein
Keyword(s):  
Water Vapor ◽  
Leaf Area Index ◽  
Leaf Area ◽  
Vegetation Index ◽  
Near Infrared ◽  
Linear Regression Models ◽  
Area Index ◽  
Estimation Performance ◽  
Red Edge ◽  
Sentinel 2

Satellite remote sensing is a useful tool for estimating crop variables, particularly Leaf Area Index (LAI), which plays a pivotal role in monitoring crop development. The goal of this study was to identify the optimal Sentinel-2 bands for LAI estimation and to derive Vegetation Indices (VI) that are well correlated with LAI. Linear regression models between time series of Sentinel-2 imagery and field-measured LAI showed that Sentinel-2 Band-8A—Narrow Near InfraRed (NIR) is more accurate for LAI estimation than the traditionally used Band-8 (NIR). Band-5 (Red edge-1) showed the lowest performance out of all red edge bands in tomato and cotton. A novel finding was that Band 9 (Water vapor) showed a very high correlation with LAI. Bands 1, 2, 3, 4, 5, 11, and 12 were saturated at LAI ≈ 3 in cotton and tomato. Bands 6, 7, 8, 8A, and 9 were not saturated at high LAI values in cotton and tomato. The tomato, cotton, and wheat LAI estimation performance of ReNDVI (R2 = 0.79, 0.98, 0.83, respectively) and two new VIs (WEVI (Water vapor red Edge Vegetation Index) (R2 = 0.81, 0.96, 0.71, respectively) and WNEVI (Water vapor narrow NIR red Edge Vegetation index) (R2 = 0.79, 0.98, 0.79, respectively)) were higher than the LAI estimation performance of the commonly used NDVI (R2 = 0.66, 0.83, 0.05, respectively) and other common VIs tested in this study. Consequently, reNDVI, WEVI, and WNEVI can facilitate more accurate agricultural monitoring than traditional VIs.

Sign in / Sign up

Export Citation Format

Share Document