scholarly journals Channel Imbalances and Along-Track Baseline Estimation for the GF-3 Azimuth Multichannel Mode

2019 ◽  
Vol 11 (11) ◽  
pp. 1297 ◽  
Author(s):  
Mingyang Shang ◽  
Xiaolan Qiu ◽  
Bing Han ◽  
Chibiao Ding ◽  
Yuxin Hu
Keyword(s):  
Real Data ◽  
Estimation Accuracy ◽  
Future Research ◽  
Sar Images ◽  
Signal Model ◽  
Baseline Phase ◽  
Stationary Target ◽  
Novel Method ◽  
Baseline Estimation ◽  
Along Track

Azimuth multichannel (AMC) synthetic aperture radar (SAR), which contains multiple receiving antennas along the azimuth, can prevent the minimum antenna area constraint and provide high-resolution and wide-swath (HRWS) SAR images. Channel calibration and along-track baseline estimation are important topics in an AMC SAR system, since they have a great impact on image quality. Based on the signal model for stationary target of AMC SAR, this paper first analyses the influence of the along-track baseline and channel imbalances on SAR images by simulation. Then, a novel method to simultaneously estimate the along-track baseline, phase imbalance and range sample time imbalance (RSTI) based on the azimuth cross-correlation in the two-dimensional frequency domain is addressed. In addition, with the help of simulations and real data acquired by Gaofen-3 (GF-3), the effectiveness of this method is verified by comparing with some existing methods. Finally, this paper analyzes the estimation accuracy of this method under different scenarios and signal-to-noise ratios (SNRs), and points out the direction for future research.

HIVID2: an accurate tool to detect virus integrations in the host genome

2021 ◽  
Author(s):  
Xi Zeng ◽  
Linghao Zhao ◽  
Chenhang Shen ◽  
Yi Zhou ◽  
Guoliang Li ◽  
...  
Keyword(s):  
Simulated Data ◽  
Real Data ◽  
Host Genome ◽  
Supplementary Information ◽  
Future Research ◽  
Specificity And Sensitivity ◽  
Novel Method ◽  
Advanced Analysis ◽  
Virus Integration ◽  
Better Than

Abstract Motivation Virus integration in the host genome is frequently reported to be closely associated with many human diseases, and the detection of virus integration is a critically challenging task. However, most existing tools show limited specificity and sensitivity. Therefore, the objective of this study is to develop a method for accurate detection of virus integration into host genomes. Results Herein, we report a novel method termed HIVID2 that is a significant upgrade of HIVID. HIVID2 performs a paired-end combination (PE-combination) for potentially integrated reads. The resulting sequences are then remapped onto the reference genomes, and both split and discordant chimeric reads are used to identify accurate integration breakpoints with high confidence. HIVID2 represents a great improvement in specificity and sensitivity, and predicts breakpoints closer to the real integrations, compared with existing methods. The advantage of our method was demonstrated using both simulated and real datasets. HIVID2 uncovered novel integration breakpoints in well-known cervical cancer-related genes, including FHIT and LRP1B, which was verified using protein expression data. In addition, HIVID2 allows the user to decide whether to automatically perform advanced analysis using the identified virus integrations. By analyzing the simulated data and real data tests, we demonstrated that HIVID2 is not only more accurate than HIVID but also better than other existing programs with respect to both sensitivity and specificity. We believe that HIVID2 will help in enhancing future research associated with virus integration. Availabilityand implementation HIVID2 can be accessed at https://github.com/zengxi-hada/HIVID2/. Supplementary information Supplementary data are available at Bioinformatics online.

scholarly journals A Moving Target Velocity Estimation Method Based on the MC-MASA SAR Mode

2021 ◽  
Vol 13 (9) ◽  
pp. 1632
Author(s):  
Yamin Wang ◽  
Jie Chen ◽  
Wei Liu ◽  
Chunsheng Li ◽  
Wei Yang
Keyword(s):  
Estimation Method ◽  
Velocity Estimation ◽  
Estimation Accuracy ◽  
Target Range ◽  
Target Velocity ◽  
Moving Target ◽  
Sar Images ◽  
Background Clutter ◽  
Along Track ◽  
Displacement Phase

Imaging position shift based on the multiple azimuth squint angles (MASA) mode is effective for target azimuth velocity estimation, whereas accuracy is low when target range velocity is high. In this paper, the estimation problem for both target azimuth and range velocities is considered based on the multi-channels MASA (MC-MASA) mode. Firstly, the acquisition geometry of MC-MASA mode and Doppler characteristics of a moving target are analyzed in detail, especially in squint mode. Then, for better moving target estimation, the stationary background clutter is removed using the displacement phase center antenna (DPCA) technique, and the failure in range velocity estimation with sequential SAR images is also discussed. Furthermore, a modified along-track interferometry (ATI) is proposed to preliminarily reconstruct the azimuth-and-range velocity map based on the MC-MASA mode. Since the velocity estimation accuracy is dependent on squint angle and signal-to-clutter ratio (SCR), the circumstances are divided into three cases with different iteration estimation strategies, which could expand the scene application scope of velocity estimation and achieve a high estimation accuracy along both azimuth and range directions. Finally, the performance of the proposed method is demonstrated by experimental results.

scholarly journals Improving the Image Quality of Moving Ships for GF-3NG Based on Simultaneous AIS Information

2021 ◽  
Vol 13 (10) ◽  
pp. 1951
Author(s):  
Yini Lv ◽  
Lihua Zhong ◽  
Xiaolan Qiu ◽  
Xinzhe Yuan ◽  
Junying Yang ◽  
...  
Keyword(s):  
Real Data ◽  
Automatic Identification ◽  
Identification System ◽  
Sar Images ◽  
Radial Acceleration ◽  
Stationary Target ◽  
Imaging Quality ◽  
Important Means ◽  
Real Time Information

The synthetic aperture radar (SAR) is an important means of ship surveillance, but the motion of the ship leads to azimuth position offset, false targets, and azimuth defocusing for the spaceborne high-resolution and wide-swath (HRWS) SAR system, causing the degradation of imaging quality. The automatic identification system (AIS) can provide real-time information of the ships, which is an important auxiliary method for ship surveillance. Up to now, the traditional fusion of SAR and AIS mainly has focused on location matching and auxiliary recognition, and the next generation of GaoFen-3 (GF-3NG) satellite is equipped with both a SAR sensor and an AIS sensor to obtain the SAR images and simultaneous AIS information of ships. Consequently, this paper proposes a novel scheme to improve the imaging quality of moving ships for GF-3NG using AIS information. In this paper, through introducing the virtual stationary target, the slant range derivation (SRD) algorithm is proposed to estimate the radial velocity (RV) and the radial acceleration (RA) between the ship and the SAR platform relative to the stationary scene. According to the calculated RV, the azimuth position offset can be estimated and the ship can be repositioned on the image. After that, the traditional method is conducted to suppress the false targets. Finally, the method of using the RA to refocus ship slices is proposed. Additionally, the experiment results based on real data illustrate the effectiveness of the proposed methods.

A Strong Tracking Cubature Kalman Filter for Nonlinear Estimation

2013 ◽  
Vol 313-314 ◽  
pp. 1115-1119
Author(s):  
Yong Qi Wang ◽  
Feng Yang ◽  
Yan Liang ◽  
Quan Pan
Keyword(s):  
Kalman Filter ◽  
State Estimation ◽  
Scaling Factor ◽  
Estimation Accuracy ◽  
Nonlinear State Estimation ◽  
Cubature Kalman Filter ◽  
Novel Method ◽  
Simulation Results ◽  
Tracking Filter ◽  
Nonlinear State

In this paper, a novel method based on cubature Kalman filter (CKF) and strong tracking filter (STF) has been proposed for nonlinear state estimation problem. The proposed method is named as strong tracking cubature Kalman filter (STCKF). In the STCKF, a scaling factor derived from STF is added and it can be tuned online to adjust the filtering gain accordingly. Simulation results indicate STCKF outperforms over EKF and CKF in state estimation accuracy.

scholarly journals Calibration of Camera and Flash LiDAR System with a Triangular Pyramid Target

2021 ◽  
Vol 11 (2) ◽  
pp. 582
Author(s):  
Zean Bu ◽  
Changku Sun ◽  
Peng Wang ◽  
Hang Dong
Keyword(s):  
Simulated Data ◽  
Real Data ◽  
Calibration Method ◽  
Multiple Sensors ◽  
Triangular Pyramid ◽  
World Coordinate System ◽  
Flash Lidar ◽  
Novel Method ◽  
3D Information ◽  
Incremental Validation

Calibration between multiple sensors is a fundamental procedure for data fusion. To address the problems of large errors and tedious operation, we present a novel method to conduct the calibration between light detection and ranging (LiDAR) and camera. We invent a calibration target, which is an arbitrary triangular pyramid with three chessboard patterns on its three planes. The target contains both 3D information and 2D information, which can be utilized to obtain intrinsic parameters of the camera and extrinsic parameters of the system. In the proposed method, the world coordinate system is established through the triangular pyramid. We extract the equations of triangular pyramid planes to find the relative transformation between two sensors. One capture of camera and LiDAR is sufficient for calibration, and errors are reduced by minimizing the distance between points and planes. Furthermore, the accuracy can be increased by more captures. We carried out experiments on simulated data with varying degrees of noise and numbers of frames. Finally, the calibration results were verified by real data through incremental validation and analyzing the root mean square error (RMSE), demonstrating that our calibration method is robust and provides state-of-the-art performance.

High-Accuracy Fundamental Frequency Detection in Power System

2011 ◽  
Vol 383-390 ◽  
pp. 4962-4966
Author(s):  
Ling Li ◽  
Guo Bin Jin ◽  
Shao Ping Huang ◽  
Xiao Peng
Keyword(s):  
Power System ◽  
Fundamental Frequency ◽  
Frequency Measurement ◽  
Least Square ◽  
Signal Model ◽  
Least Square Estimation ◽  
Signal Process ◽  
Frequency Detection ◽  
Novel Method ◽  
Subspace Estimation

A novel method on frequency measurement based on improved TLS-ESPRIT (total least square estimation of signal parameters via rotational invariance techniques) is proposed in this paper with the research on fundamental frequency measurement in power system. TLS-ESPRIT is belong to subspace estimation in modern signal process. Noise is included in signal model, so it is independent on noise. But the same multi-poles cannot be taken when signal is in noise and based on TLS-ESPRIT. Multiple poles restoring is presented to take the true poles accurately. It is revealed that fundamental frequency is detected accurately in harmonics, interharmonics, noise and frequency fluctuations and better anti-noise ability in particular better adaptiveness on time varying signal in amplitude by simulation results.

What every mathematician should know about modelling crime

2010 ◽  
Vol 21 (4-5) ◽  
pp. 275-281 ◽  
Author(s):  
MARCUS FELSON
Keyword(s):  
Mathematical Models ◽  
Real Data ◽  
Future Research ◽  
Data Modelling

This paper by a criminologist explains why it makes more sense to model criminal acts than to model criminals, how many preconceptions about crime can mislead modellers and offers some simple crime modelling ideas. Many opportunities for simulation now exist, and new opportunities for real-data modelling are emerging. The author suggests mathematical models of crime, including offender foraging for crime targets, as a rich area for future research.

syris: a flexible and efficient framework for X-ray imaging experiments simulation

2017 ◽  
Vol 24 (6) ◽  
pp. 1283-1295 ◽  
Author(s):  
Tomáš Faragó ◽  
Petr Mikulík ◽  
Alexey Ershov ◽  
Matthias Vogelgesang ◽  
Daniel Hänschke ◽  
...  
Keyword(s):  
Motion Estimation ◽  
Data Processing ◽  
Graphics Processing Units ◽  
High Speed ◽  
Real Data ◽  
Estimation Accuracy ◽  
Processing Parameter ◽  
X Ray ◽  
X Ray Imaging ◽  
Imaging Conditions

An open-source framework for conducting a broad range of virtual X-ray imaging experiments,syris, is presented. The simulated wavefield created by a source propagates through an arbitrary number of objects until it reaches a detector. The objects in the light path and the source are time-dependent, which enables simulations of dynamic experiments,e.g.four-dimensional time-resolved tomography and laminography. The high-level interface ofsyrisis written in Python and its modularity makes the framework very flexible. The computationally demanding parts behind this interface are implemented in OpenCL, which enables fast calculations on modern graphics processing units. The combination of flexibility and speed opens new possibilities for studying novel imaging methods and systematic search of optimal combinations of measurement conditions and data processing parameters. This can help to increase the success rates and efficiency of valuable synchrotron beam time. To demonstrate the capabilities of the framework, various experiments have been simulated and compared with real data. To show the use case of measurement and data processing parameter optimization based on simulation, a virtual counterpart of a high-speed radiography experiment was created and the simulated data were used to select a suitable motion estimation algorithm; one of its parameters was optimized in order to achieve the best motion estimation accuracy when applied on the real data.syriswas also used to simulate tomographic data sets under various imaging conditions which impact the tomographic reconstruction accuracy, and it is shown how the accuracy may guide the selection of imaging conditions for particular use cases.

scholarly journals Estimating Resting Core Temperature Using Heart Rate

2018 ◽  
Vol 1 (2) ◽  
pp. 79-86 ◽  
Author(s):  
David P. Looney ◽  
Mark J. Buller ◽  
Andrei V. Gribok ◽  
Jayme L. Leger ◽  
Adam W. Potter ◽  
...  
Keyword(s):  
Heart Rate ◽  
Core Temperature ◽  
Estimation Algorithm ◽  
Quadratic Equation ◽  
Estimation Accuracy ◽  
Future Research ◽  
Accuracy And Precision ◽  
Military Populations ◽  
Thermal Work ◽  
Ct Data

ECTemp™ is a heart rate (HR)-based core temperature (CT) estimation algorithm mainly used as a real-time thermal-work strain indicator in military populations. ECTemp™ may also be valuable for resting CT estimation, which is critical for circadian rhythm research. This investigation developed and incorporated a sigmoid equation into ECTemp™ to better estimate resting CT. HR and CT data were collected over two calorimeter test trials from 16 volunteers (age, 23 ± 3 yrs; height, 1.72 ± 0.07 m; body mass, 68.5 ± 8.1 kg) during periods of sleep and inactivity. Half of the test trials were combined with ECTemp™’s original development dataset to train the new sigmoid model while the other was used for model validation. Models were compared by their estimation accuracy and precision. While both models produced accurate CT estimates, the sigmoid model had a smaller bias (−0.04 ± 0.26°C vs. −0.19 ± 0.29°C) and root mean square error (RMSE; 0.26°C vs. 0.35°C). ECTemp™ is a validated HR-based resting CT estimation algorithm. The new sigmoid equation corrects lower CT estimates while producing nearly identical estimates to the original quadratic equation at higher CT. The demonstrated accuracy of ECTemp™ encourages future research to explore the algorithm’s potential as a non-invasive means of tracking CT circadian rhythms.

scholarly journals Sub-Frame Evaluation of Frame Synchronization for Camera Network Using Linearly Oscillating Light Spot

Sensors ◽  
2021 ◽  
Vol 21 (18) ◽  
pp. 6148
Author(s):  
Hyuno Kim ◽  
Masatoshi Ishikawa
Keyword(s):  
Visual Information ◽  
Evaluation Method ◽  
Measurement Instrument ◽  
Light Spot ◽  
Estimation Accuracy ◽  
Accurate Data ◽  
Frame Synchronization ◽  
Camera Network ◽  
Novel Method ◽  
Synchronization Accuracy

Precisely evaluating the frame synchronization of the camera network is often required for accurate data fusion from multiple visual information. This paper presents a novel method to estimate the synchronization accuracy by using inherent visual information of linearly oscillating light spot captured in the camera images instead of using luminescence information or depending on external measurement instrument. The suggested method is compared to the conventional evaluation method to prove the feasibility. Our experiment result implies that the estimation accuracy of the frame synchronization can be achieved in sub-millisecond order.

Sign in / Sign up

Export Citation Format

Share Document