scholarly journals Challenges and Future Perspectives of Multi-/Hyperspectral Thermal Infrared Remote Sensing for Crop Water-Stress Detection: A Review

2019 ◽  
Vol 11 (10) ◽  
pp. 1240 ◽  
Author(s):  
Max Gerhards ◽  
Martin Schlerf ◽  
Kaniska Mallick ◽  
Thomas Udelhoven

Thermal infrared (TIR) multi-/hyperspectral and sun-induced fluorescence (SIF) approaches together with classic solar-reflective (visible, near-, and shortwave infrared reflectance (VNIR)/SWIR) hyperspectral remote sensing form the latest state-of-the-art techniques for the detection of crop water stress. Each of these three domains requires dedicated sensor technology currently in place for ground and airborne applications and either have satellite concepts under development (e.g., HySPIRI/SBG (Surface Biology and Geology), Sentinel-8, HiTeSEM in the TIR) or are subject to satellite missions recently launched or scheduled within the next years (i.e., EnMAP and PRISMA (PRecursore IperSpettrale della Missione Applicativa, launched on March 2019) in the VNIR/SWIR, Fluorescence Explorer (FLEX) in the SIF). Identification of plant water stress or drought is of utmost importance to guarantee global water and food supply. Therefore, knowledge of crop water status over large farmland areas bears large potential for optimizing agricultural water use. As plant responses to water stress are numerous and complex, their physiological consequences affect the electromagnetic signal in different spectral domains. This review paper summarizes the importance of water stress-related applications and the plant responses to water stress, followed by a concise review of water-stress detection through remote sensing, focusing on TIR without neglecting the comparison to other spectral domains (i.e., VNIR/SWIR and SIF) and multi-sensor approaches. Current and planned sensors at ground, airborne, and satellite level for the TIR as well as a selection of commonly used indices and approaches for water-stress detection using the main multi-/hyperspectral remote sensing imaging techniques are reviewed. Several important challenges are discussed that occur when using spectral emissivity, temperature-based indices, and physically-based approaches for water-stress detection in the TIR spectral domain. Furthermore, challenges with data processing and the perspectives for future satellite missions in the TIR are critically examined. In conclusion, information from multi-/hyperspectral TIR together with those from VNIR/SWIR and SIF sensors within a multi-sensor approach can provide profound insights to actual plant (water) status and the rationale of physiological and biochemical changes. Synergistic sensor use will open new avenues for scientists to study plant functioning and the response to environmental stress in a wide range of ecosystems.

2005 ◽  
Author(s):  
M. Susan Moran ◽  
Pablo J. Zarco-Tejada ◽  
Thomas R. Clarke

Horticulturae ◽  
2020 ◽  
Vol 6 (4) ◽  
pp. 86
Author(s):  
Chen Ru ◽  
Xiaotao Hu ◽  
Wene Wang ◽  
Hui Ran ◽  
Tianyuan Song ◽  
...  

Precise irrigation management of grapevines in greenhouses requires a reliable method to easily quantify and monitor the grapevine water status to enable effective manipulation of the water stress of the plants. This study evaluated the applicability of crop water stress index (CWSI) based on the leaf temperature for diagnosing the grapevine water status. The experiment was conducted at Yuhe Farm (northwest China), with drip-irrigated grapevines under three irrigation treatments. Meteorological factors, soil moisture contents, leaf temperature, growth indicators including canopy coverage and fruit diameter, and physiological indicators including SPAD (relative chlorophyll content), stem water potential (φs), stomatal conductance (gs), and transpiration rate (E) were studied during the growing season. The results show that the relationship between the leaf-air temperature difference (Tc-Ta) and the plant water status indicators (φs, gs, E) were significant (P < 0.05), and the relationship between gs, E and Tc-Ta was the closest, with R2 values ranging from 0.530–0.604 and from 0.545–0.623, respectively. CWSI values are more easily observed on sunny days, and it was determined that 14:00 BJS is the best observation time for the CWSI value under different non-water-stressed baselines. There is a reliable linear correlation between the CWSI value and the soil moisture at 0–40 cm (P < 0.05), which could provide a reference when using the CWSI to diagnose the water status of plants. Compared with the Tc-Ta value, the CWSI could more accurately monitor the plant water status, and above the considered indictors, gs has the greatest correlation with the CWSI.


2014 ◽  
Vol 1 (1) ◽  
pp. 1203-1237
Author(s):  
A. Bonfante ◽  
A. Agrillo ◽  
R. Albrizio ◽  
A. Basile ◽  
R. Buonomo ◽  
...  

Abstract. This paper aims to test a new physically oriented approach to viticulture zoning at the farm scale, strongly rooted on hydropedology and aiming to achieve a better use of environmental features with respect to plant requirement and wine production. The physics of our approach is defined by the use of soil-plant-atmosphere simulation models which applies physically-based equations to describe the soil hydrological processes and solves soil-plant water status. This study (ZOVISA project) was conducted in a farm devoted to high quality wines production (Aglianico DOC), located in South Italy (Campania region, Mirabella Eclano-AV). The soil spatial distribution was obtained after standard soil survey informed by geophysical survey. Two Homogenous Zones (HZs) were identified; in each one of those a physically based model was applied to solve the soil water balance and estimate the soil functional behaviour (crop water stress index, CWSI) defining the functional Homogeneous Zones (fHzs). In these last, experimental plots were established and monitored for investigating soil-plant water status, crop development (biometric and physiological parameters) and daily climate variables (temperature, solar radiation, rainfall, wind). The effects of crop water status on crop response over must and wine quality were then evaluated in the fHZs. This was performed by comparing crop water stress with (i) crop physiological measurement (leaf gas exchange, chlorophyll a fluorescence, leaf water potential, chlorophyll content, LAI measurement), (ii) grape bunches measurements (berry weight, sugar content, titratable acidity, etc.) and (iii) wine quality (aromatic response). Eventually this experiment has proved the usefulness of the physical based approach also in the case of mapping viticulture microzoning.


SOIL ◽  
2015 ◽  
Vol 1 (1) ◽  
pp. 427-441 ◽  
Author(s):  
A. Bonfante ◽  
A. Agrillo ◽  
R. Albrizio ◽  
A. Basile ◽  
R. Buonomo ◽  
...  

Abstract. This paper aims to test a new physically oriented approach to viticulture zoning at farm scale that is strongly rooted in hydropedology and aims to achieve a better use of environmental features with respect to plant requirements and wine production. The physics of our approach are defined by the use of soil–plant–atmosphere simulation models, applying physically based equations to describe the soil hydrological processes and solve soil–plant water status. This study (part of the ZOVISA project) was conducted on a farm devoted to production of high-quality wines (Aglianico DOC), located in southern Italy (Campania region, Mirabella Eclano, AV). The soil spatial distribution was obtained after standard soil survey informed by geophysical survey. Two homogeneous zones (HZs) were identified; in each one a physically based model was applied to solve the soil water balance and estimate the soil functional behaviour (crop water stress index, CWSI) defining the functional homogeneous zones (fHZs). For the second process, experimental plots were established and monitored for investigating soil–plant water status, crop development (biometric and physiological parameters) and daily climate variables (temperature, solar radiation, rainfall, wind). The effects of crop water status on crop response over must and wine quality were then evaluated in the fHZs. This was performed by comparing crop water stress with (i) crop physiological measurement (leaf gas exchange, chlorophyll a fluorescence, leaf water potential, chlorophyll content, leaf area index (LAI) measurement), (ii) grape bunches measurements (berry weight, sugar content, titratable acidity, etc.) and (iii) wine quality (aromatic response). This experiment proved the usefulness of the physically based approach, also in the case of mapping viticulture microzoning.


2015 ◽  
pp. 667-676 ◽  
Author(s):  
T. Bartzanas ◽  
N. Katsoulas ◽  
A. Elvanidi ◽  
K.P. Ferentinos ◽  
C. Kittas

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1117
Author(s):  
Anatoly Mikhailovich Zeyliger ◽  
Olga Sergeevna Ermolaeva

In the past few decades, combinations of remote sensing technologies with ground-based methods have become available for use at the level of irrigated fields. These approaches allow an evaluation of crop water stress dynamics and irrigation water use efficiency. In this study, remotely sensed and ground-based data were used to develop a method of crop water stress assessment and analysis. Input datasets of this method were based on the results of ground-based and satellite monitoring in 2012. Required datasets were collected for 19 irrigated alfalfa crops in the second year of growth at three study sites located in Saratovskoe Zavolzhie (Saratov Oblast, Russia). Collected datasets were applied to calculate the dynamics of daily crop water stress coefficients for all studied crops, thereby characterizing the efficiency of crop irrigation. Accordingly, data on the crop yield of three harvests were used. An analysis of the results revealed a linear relationship between the crop yield of three cuts and the average value of the water stress coefficient. Further application of this method may be directed toward analyzing the effectiveness of irrigation practices and the operational management of agricultural crop irrigation.


2020 ◽  
Author(s):  
Angela Morales Santos ◽  
Reinhard Nolz

&lt;p&gt;Sustainable irrigation water management is expected to accurately meet crop water requirements in order to avoid stress and, consequently, yield reduction, and at the same time avoid losses of water and nutrients due to deep percolation and leaching. Sensors to monitor soil water status and plant water status (in terms of canopy temperature) can help planning irrigation with respect to time and amounts accordingly. The presented study aimed at quantifying and comparing crop water stress of soybeans irrigated by means of different irrigation systems under subhumid conditions.&lt;/p&gt;&lt;p&gt;The study site was located in Obersiebenbrunn, Lower Austria, about 30 km east of Vienna. The region is characterized by a mean temperature of 10.5&amp;#176;C with increasing trend due to climate change and mean annual precipitation of 550 mm. The investigations covered the vegetation period of soybean in 2018, from planting in April to harvest in September. Measurement data included precipitation, air temperature, relative humidity and wind velocity. The experimental field of 120x120 m&lt;sup&gt;2&lt;/sup&gt; has been divided into four sub-areas: a plot of 14x120&amp;#160;m&lt;sup&gt;2&lt;/sup&gt; with drip irrigation (DI), 14x120&amp;#160;m&lt;sup&gt;2&lt;/sup&gt; without irrigation (NI), 36x120&amp;#160;m&lt;sup&gt;2&lt;/sup&gt; with sprinkler irrigation (SI), and 56x120&amp;#160;m&lt;sup&gt;2&lt;/sup&gt; irrigated with a hose reel boom with nozzles (BI). A total of 128, 187 and 114 mm of water were applied in three irrigation events in the plots DI, SI and BI, respectively. Soil water content was monitored in 10&amp;#160;cm depth (HydraProbe, Stevens Water) and matric potential was monitored in 20, 40 and 60&amp;#160;cm depth (Watermark, Irrometer). Canopy temperature was measured every 15&amp;#160;minutes using infrared thermometers (IRT; SI-411, Apogee Instruments). The IRTs were installed with an inclination of 45&amp;#176; at 1.8&amp;#160;m height above ground. Canopy temperature-based water stress indices for irrigation scheduling have been successfully applied in arid environments, but their use is limited in humid areas due to low vapor pressure deficit (VPD). To quantify stress in our study, the Crop Water Stress Index (CWSI) was calculated for each plot and compared to the index resulting from the Degrees Above Canopy Threshold (DACT) method. Unlike the CWSI, the DACT method does not consider VPD to provide a stress index nor requires clear sky conditions. The purpose of the comparison was to revise an alternative method to the CWSI that can be applied in a humid environment.&lt;/p&gt;&lt;p&gt;CWSI behaved similar for the four sub-areas. As expected, CWSI &amp;#8805; 1 during dry periods (representing severe stress) and it decreased considerably after precipitation or irrigation (representing no stress). The plot with overall lower stress was BI, producing the highest yield of the four plots. Results show that DACT may be a more suitable index since all it requires is canopy temperature values and has strong relationship with soil water measurements. Nevertheless, attention must be paid when defining canopy temperature thresholds. Further investigations include the development and test of a decision support system for irrigation scheduling combining both, plant-based and soil water status indicators for water use efficiency analysis.&lt;/p&gt;


2014 ◽  
Vol 15 (3) ◽  
pp. 273-289 ◽  
Author(s):  
Ronit Rud ◽  
Y. Cohen ◽  
V. Alchanatis ◽  
A. Levi ◽  
R. Brikman ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document