scholarly journals Multi-Level Classification Based on Trajectory Features of Time Series for Monitoring Impervious Surface Expansions

2019 ◽  
Vol 11 (6) ◽  
pp. 640 ◽  
Author(s):  
Beibei Wang ◽  
Zhenjie Chen ◽  
A-Xing Zhu ◽  
Yuzhu Hao ◽  
Changqing Xu
Keyword(s):  
Time Series ◽  
Environmental Changes ◽  
Impervious Surface ◽  
Impervious Surfaces ◽  
Spatiotemporal Resolution ◽  
Monitoring Method ◽  
Expansion Time ◽  
Trajectory Features ◽  
Surface Expansion ◽  
Multi Level

As urbanization has profound effects on global environmental changes, quick and accurate monitoring of the dynamic changes in impervious surfaces is of great significance for environmental protection. The increased spatiotemporal resolution of imagery makes it possible to construct time series to obtain long-time-period and high-accuracy information about impervious surface expansion. In this study, a three-step monitoring method based on time series trajectory segmentation was developed to extract impervious surface expansion using Landsat time series and was applied to the Xinbei District, Changzhou, China, from 2005 to 2017. Firstly, the original time series was segmented and fitted to remove the noise caused by clouds, shadows, and interannual differences, leaving only the trend information. Secondly, the time series trajectory features of impervious surface expansion were described using three phases and four types with nine parameters by analyzing the trajectory characteristics. Thirdly, a multi-level classification method was used to determine the scope of impervious surface expansion, and the expansion time was superimposed to obtain a spatiotemporal distribution map. The proposed method yielded an overall accuracy of 90.58% and a Kappa coefficient of 0.90, demonstrating that Landsat time series remote sensing images could be used effectively in this approach to monitor the spatiotemporal expansion of impervious surfaces.

scholarly journals Spatiotemporal Variance Assessment of Urban Rainstorm Waterlogging Affected by Impervious Surface Expansion: A Case Study of Guangzhou, China

2018 ◽  
Vol 10 (10) ◽  
pp. 3761 ◽  
Author(s):  
Huafei Yu ◽  
Yaolong Zhao ◽  
Yingchun Fu ◽  
Le Li
Keyword(s):  
Spatial Pattern ◽  
Urban Renewal ◽  
Impervious Surface ◽  
City Centre ◽  
Impervious Surfaces ◽  
Surface Expansion ◽  
The Impact ◽  
Gwr Model ◽  
Runoff Plots

Urban rainstorm waterlogging has become a typical “city disease” in China. It can result in a huge loss of social economy and personal property, accordingly hindering the sustainable development of a city. Impervious surface expansion, especially the irregular spatial pattern of impervious surfaces, derived from rapid urbanization processes has been proven to be one of the main influential factors behind urban waterlogging. Therefore, optimizing the spatial pattern of impervious surfaces through urban renewal is an effective channel through which to attenuate urban waterlogging risk for developed urban areas. However, the most important step for the optimization of the spatial pattern of impervious surfaces is to understand the mechanism of the impact of urbanization processes, especially the spatiotemporal pattern of impervious surfaces, on urban waterlogging. This research aims to elucidate the mechanism of urbanization’s impact on waterlogging by analysing the spatiotemporal characteristics and variance of urban waterlogging affected by urban impervious surfaces in a case study of Guangzhou in China. First, the study area was divided into runoff plots by means of the hydrologic analysis method, based on which the analysis of spatiotemporal variance was carried out. Then, due to the heterogeneity of urban impervious surface effects on waterlogging, a geographically weighted regression (GWR) model was utilized to assess the spatiotemporal variance of the impact of impervious surface expansion on urban rainstorm waterlogging during the period from the 1990s to the 2010s. The results reveal that urban rainstorm waterlogging significantly expanded in a dense and circular layer surrounding the city centre, similar to the impervious surface expansion affected by urbanization policies. Taking the urban runoff plot as the research unit, GWR has achieved a good modelling effect for urban storm waterlogging. The results show that the impervious surfaces in the runoff plots of the southeastern part of Yuexiu, the southern part of Tianhe and the western part of Haizhu, which have experienced major urban engineering construction, have the strongest correlation with urban rainstorm waterlogging. However, for different runoff plots, the impact of impervious surfaces on urban waterlogging is quite different, as there exist other influence factors in the various runoff plots, although the impervious surface is one of the main factors. This result means that urban renewal strategy to optimize the spatial pattern of impervious surfaces for urban rainstorm waterlogging prevention and control should be different for different runoff plots. The results of the GWR model analysis can provide useful information for urban renewal strategy-making.

scholarly journals GISD30: global 30-m impervious surface dynamic dataset from 1985 to 2020 using time-series Landsat imagery on the Google Earth Engine platform

2021 ◽  
Author(s):  
Xiao Zhang ◽  
Liangyun Liu ◽  
Tingting Zhao ◽  
Yuan Gao ◽  
Xidong Chen ◽  
...  
Keyword(s):  
Time Series ◽  
Landsat Imagery ◽  
Impervious Surface ◽  
Google Earth ◽  
Reflectance Spectra ◽  
Impervious Surfaces ◽  
Surface Dynamics ◽  
Google Earth Engine ◽  
Surface Dynamic ◽  
Spatiotemporal Consistency

Abstract. Accurately mapping impervious surface dynamics has great scientific significance and application value for urban sustainable development research, anthropogenic carbon emission assessment and global ecological environment modeling. In this study, a novel and accurate global 30 m impervious surface dynamic dataset (GISD30) for 1985 to 2020 was produced using the spectral generalization method and time-series Landsat imagery, on the Google Earth Engine cloud-computing platform. Firstly, the global training samples and corresponding reflectance spectra were automatically derived from prior global 30 m land-cover products after employing the multitemporal compositing method and relative radiometric normalization. Then, spatiotemporal adaptive classification models, trained with the migrated reflectance spectra of impervious surfaces from 2020 and pervious surface samples in the same epoch for each 5° × 5° geographical tile, were applied to map the impervious surface in each period. Furthermore, a spatiotemporal consistency correction method was presented to minimize the effects of independent classification errors and improve the spatiotemporal consistency of impervious surface dynamics. Our global 30 m impervious surface dynamic model achieved an overall accuracy of 91.5 % and a kappa coefficient of 0.866 using 18,540 global time-series validation samples. Cross-comparisons with four existing global 30 m impervious surface products further indicated that our GISD30 dynamic product achieved the best performance in capturing the spatial distributions and spatiotemporal dynamics of impervious surfaces in various impervious landscapes. The statistical results indicated that the global impervious surface has doubled in the past 35 years, from 5.116 × 105 km2 in 1985 to 10.871 × 105 km2 in 2020, and Asia saw the largest increase in impervious surface area compared to other continents, with a total increase of 2.946 × 105 km2. Therefore, it was concluded that our global 30 m impervious surface dynamic dataset is an accurate and promising product, and could provide vital support in monitoring regional or global urbanization as well as in related applications. The global 30 m impervious surface dynamic dataset from 1985 to 2020 generated in this paper is free to access at http://doi.org/10.5281/zenodo.5220816 (Liu et al., 2021b).

scholarly journals Sentinel-1 time series for mapping snow cover and timing of snowmelt in Arctic periglacial environments: Case study from the Zackenberg Valley, Greenland

2021 ◽  
Author(s):  
Sebastian Buchelt ◽  
Kirstine Skov ◽  
Tobias Ullmann
Keyword(s):  
Time Series ◽  
Snow Cover ◽  
Large Scale ◽  
Environmental Changes ◽  
Time Lapse ◽  
Ecosystem Functions ◽  
Small Scale ◽  
Spatiotemporal Resolution ◽  
High Spatiotemporal Resolution ◽  
Wide Range

Abstract. Snow cover (SC) and timing of snowmelt are key regulators of a wide range of Arctic ecosystem functions. Both are strongly influenced by the amplified arctic warming and essential variables to understand environmental changes and their dynamics. This study evaluates the potential of Sentinel-1 (S-1) synthetic aperture radar (SAR) time series for monitoring SC and snowmelt with high spatiotemporal resolution to capture their understudied small-scale heterogeneity. We use 97 dual-polarized S-1 SAR images acquired over north-eastern Greenland in the interferometric wide swath mode from the years 2017 and 2018. Comparison of S-1 intensity against SC fraction maps derived from orthorectified terrestrial time lapse imagery indicates an increase of the SAR intensity before a decrease of SC fraction is observed. Hence, increase of backscatter is related to changing snowpack properties during the runoff phase as well as decreasing SC fraction. We here present a novel approach using backscatter intensity thresholds to identify start and end of snowmelt (SOS and EOS), perennial snow and wet/dry SC based on the temporal evolution of the SAR signal. Comparison of SC with orthorectified time lapse imagery indicate that HV polarization outperforms HH when using a global threshold. With a global configuration (Threshold: 4 dB; polarization: HV), the overall accuracy of SC maps was in all cases above 75 % and in more than half cases above 90 % enabling a large-scale SC monitoring at high spatiotemporal resolution (20 m, 6 days) with high accuracy.

scholarly journals Spatiotemporal Continuous Impervious Surface Mapping by Fusion of Landsat Time Series Data and Google Earth Imagery

2021 ◽  
Vol 13 (12) ◽  
pp. 2409
Author(s):  
Rui Chen ◽  
Xiaodong Li ◽  
Yihang Zhang ◽  
Pu Zhou ◽  
Yalan Wang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Urban Areas ◽  
Impervious Surface ◽  
Google Earth ◽  
Temporal Consistency ◽  
Impervious Surfaces ◽  
Consistency Check ◽  
Surface Mapping ◽  
Fraction Images

The monitoring of impervious surfaces in urban areas using remote sensing with fine spatial and temporal resolutions is crucial for monitoring urban development and environmental changes in urban areas. Spatiotemporal super-resolution mapping (STSRM) fuses fine-spatial-coarse-temporal remote sensing data with coarse-spatial-fine-temporal data, allowing for urban impervious surface mapping at both fine-spatial and fine-temporal resolutions. The STSRM involves two main steps: unmixing the coarse-spatial-fine-temporal remote sensing data to class fraction images, and downscaling the fraction images to sub-pixel land cover maps. Yet, challenges exist in each step when applying STSRM in mapping impervious surfaces. First, the impervious surfaces have high spectral variability (i.e., high intra-class and low inter-class variability), which impacts the accurate extraction of sub-pixel scale impervious surface fractions. Second, downscaling the fraction images to sub-pixel land cover maps is an ill-posed problem and would bring great uncertainty and error in the predictions. This paper proposed a new Spatiotemporal Continuous Impervious Surface Mapping (STCISM) method to deal with these challenges in fusing Landsat and Google Earth imagery. The STCISM used the Multiple Endmember Spectral Mixture Analysis and the Fisher Discriminant Analysis to minimize the within-class variability and maximize the between-class variability to reduce the spectral unmixing uncertainty. In addition, the STCISM adopted a new temporal consistency check model to incorporate temporal contextual information to reduce the uncertainty in the time-series impervious surface prediction maps. Unlike the traditional temporal consistency check model that assumed the impervious-to-pervious conversion is unlikely to happen, the new model allowed the bidirectional conversions between pervious and impervious surfaces. The temporal consistency check was used as a post-procession method to correct the errors in the prediction maps. The proposed STCISM method was used to predict time-series impervious surface maps at 5 m resolution of Google Earth image at the Landsat frequency. The results showed that the proposed STCISM outperformed the STSRM model without using the temporal consistency check and the STSRM model using the temporal consistency check based on the unidirectional pervious-to-impervious surface conversion rule.

scholarly journals Exploring the Variation Trend of Urban Expansion, Land Surface Temperature, and Ecological Quality and Their Interrelationships in Guangzhou, China, from 1987 to 2019

2021 ◽  
Vol 13 (5) ◽  
pp. 1019
Author(s):  
Jianhui Xu ◽  
Yi Zhao ◽  
Caige Sun ◽  
Hanbin Liang ◽  
Ji Yang ◽  
...  
Keyword(s):  
Time Series ◽  
Surface Temperature ◽  
Land Surface Temperature ◽  
Land Surface ◽  
Urban Expansion ◽  
Impervious Surface ◽  
Ecological Quality ◽  
Urban Center ◽  
Urban Centers ◽  
Rapid Urbanization

This study explored the model of urban impervious surface (IS) density, land surface temperature (LST), and comprehensive ecological evaluation index (CEEI) from urban centers to suburbs. The interrelationships between these parameters in Guangzhou from 1987 to 2019 were analyzed using time-series Landsat-5 TM (Thematic Mapper), Landsat-8 OLI (Operational Land Imager), and TIRS (Thermal Infrared Sensor) images. The urban IS densities were calculated in concentric rings using time-series IS fractions, which were used to construct an inverse S-shaped urban IS density function to depict changes in urban form and the spatio-temporal dynamics of urban expansion from the urban center to the suburbs. The results indicated that Guangzhou experienced expansive urban growth, with the patterns of urban spatial structure changing from a single-center to a multi-center structure over the past 32 years. Next, the normalized LST and CEEI in each concentric ring were calculated, and their variation trends from the urban center to the suburbs were modeled using linear and nonlinear functions, respectively. The results showed that the normalized LST had a gradual decreasing trend from the urban center to the suburbs, while the CEEI showed a significant increasing trend. During the 32-year rapid urban development, the normalized LST difference between the urban center and suburbs increased gradually with time, and the CEEI significantly decreased. This indicated that rapid urbanization significantly expanded the impervious surface areas in Guangzhou, leading to an increase in the LST difference between urban centers and suburbs and a deterioration in ecological quality. Finally, the potential interrelationships among urban IS density, normalized LST, and CEEI were also explored using different models. This study revealed that rapid urbanization has produced geographical convergence between several ISs, which may increase the risk of the urban heat island effect and degradation of ecological quality.

scholarly journals A monitoring method of semiconductor manufacturing processes using Internet of Things–based big data analysis

2017 ◽  
Vol 13 (7) ◽  
pp. 155014771772181 ◽  
Author(s):  
Seok-Woo Jang ◽  
Gye-Young Kim
Keyword(s):  
Time Series ◽  
Big Data ◽  
Data Analysis ◽  
Internet Of Things ◽  
Real Time ◽  
Semiconductor Manufacturing ◽  
Reference Model ◽  
Big Data Analysis ◽  
Monitoring Method ◽  
Manufacturing Equipment

This article proposes an intelligent monitoring system for semiconductor manufacturing equipment, which determines spec-in or spec-out for a wafer in process, using Internet of Things–based big data analysis. The proposed system consists of three phases: initialization, learning, and prediction in real time. The initialization sets the weights and the effective steps for all parameters of equipment to be monitored. The learning performs a clustering to assign similar patterns to the same class. The patterns consist of a multiple time-series produced by semiconductor manufacturing equipment and an after clean inspection measured by the corresponding tester. We modify the Line, Buzo, and Gray algorithm for classifying the time-series patterns. The modified Line, Buzo, and Gray algorithm outputs a reference model for every cluster. The prediction compares a time-series entered in real time with the reference model using statistical dynamic time warping to find the best matched pattern and then calculates a predicted after clean inspection by combining the measured after clean inspection, the dissimilarity, and the weights. Finally, it determines spec-in or spec-out for the wafer. We will present experimental results that show how the proposed system is applied on the data acquired from semiconductor etching equipment.

Sign in / Sign up

Export Citation Format

Share Document