scholarly journals Evaluation of Ground Surface Models Derived from Unmanned Aerial Systems with Digital Aerial Photogrammetry in a Disturbed Conifer Forest

2019 ◽  
Vol 11 (1) ◽  
pp. 84 ◽  
Author(s):  
Alexander Graham ◽  
Nicholas Coops ◽  
Michael Wilcox ◽  
Andrew Plowright
Keyword(s):  
Canopy Cover ◽  
Point Clouds ◽  
Unmanned Aerial Systems ◽  
Optimal Parameters ◽  
Conifer Forest ◽  
Terrain Modeling ◽  
Ground Truth Data ◽  
Aerial Photogrammetry ◽  
Terrain Slope ◽  
Aerial Systems

Detailed vertical forest structure information can be remotely sensed by combining technologies of unmanned aerial systems (UAS) and digital aerial photogrammetry (DAP). A key limitation in the application of DAP methods, however, is the inability to produce accurate digital elevation models (DEM) in areas of dense vegetation. This study investigates the terrain modeling potential of UAS-DAP methods within a temperate conifer forest in British Columbia, Canada. UAS-acquired images were photogrammetrically processed to produce high-resolution DAP point clouds. To evaluate the terrain modeling ability of DAP, first, a sensitivity analysis was conducted to estimate optimal parameters of three ground-point classification algorithms designed for airborne laser scanning (ALS). Algorithms tested include progressive triangulated irregular network (TIN) densification (PTD), hierarchical robust interpolation (HRI) and simple progressive morphological filtering (SMRF). Points were classified as ground from the ALS and served as ground-truth data to which UAS-DAP derived DEMs were compared. The proportion of area with root mean square error (RMSE) <1.5 m were 56.5%, 51.6% and 52.3% for the PTD, HRI and SMRF methods respectively. To assess the influence of terrain slope and canopy cover, error values of DAP-DEMs produced using optimal parameters were compared to stratified classes of canopy cover and slope generated from ALS point clouds. Results indicate that canopy cover was approximately three times more influential on RMSE than terrain slope.

scholarly journals Assessing the Ability of Image Based Point Clouds Captured from a UAV to Measure the Terrain in the Presence of Canopy Cover

Forests ◽  
2019 ◽  
Vol 10 (3) ◽  
pp. 284 ◽  
Author(s):  
Luke Wallace ◽  
Chris Bellman ◽  
Bryan Hally ◽  
Jaime Hernandez ◽  
Simon Jones ◽  
...  
Keyword(s):  
Ground Surface ◽  
Canopy Cover ◽  
Weather Conditions ◽  
Point Clouds ◽  
Unmanned Aerial Systems ◽  
Image Capture ◽  
Terrain Model ◽  
Processing Strategies ◽  
Aerial Systems

Point clouds captured from Unmanned Aerial Systems are increasingly relied upon to provide information describing the structure of forests. The quality of the information derived from these point clouds is dependent on a range of variables, including the type and structure of the forest, weather conditions and flying parameters. A key requirement to achieve accurate estimates of height based metrics describing forest structure is a source of ground information. This study explores the availability and reliability of ground surface points available within point clouds captured in six forests of different structure (canopy cover and height), using three image capture and processing strategies, consisting of nadir, oblique and composite nadir/oblique image networks. The ground information was extracted through manual segmentation of the point clouds as well as through the use of two commonly used ground filters, LAStools lasground and the Cloth Simulation Filter. The outcomes of these strategies were assessed against ground control captured with a Total Station. Results indicate that a small increase in the number of ground points captured (between 0 and 5% of a 10 m radius plot) can be achieved through the use of a composite image network. In the case of manually identified ground points, this reduced the root mean square error (RMSE) error of the terrain model by between 1 and 11 cm, with greater reductions seen in plots with high canopy cover. The ground filters trialled were not able to exploit the extra information in the point clouds and inconsistent results in terrain RMSE were obtained across the various plots and imaging network configurations. The use of a composite network also provided greater penetration into the canopy, which is likely to improve the representation of mid-canopy elements.

scholarly journals Augmentation of Traditional Forest Inventory and Airborne Laser Scanning with Unmanned Aerial Systems and Photogrammetry for Forest Monitoring

2018 ◽  
Vol 10 (10) ◽  
pp. 1562 ◽  
Author(s):  
Kathryn Fankhauser ◽  
Nikolay Strigul ◽  
Demetrios Gatziolis
Keyword(s):  
Laser Scanning ◽  
Canopy Cover ◽  
Tree Height ◽  
Forest Monitoring ◽  
Unmanned Aerial Systems ◽  
Aerial Laser Scanning ◽  
Forest Inventories ◽  
Airborne Laser ◽  
Aerial Systems

Forest inventories are constrained by resource-intensive fieldwork, while unmanned aerial systems (UASs) offer rapid, reliable, and replicable data collection and processing. This research leverages advancements in photogrammetry and market sensors and platforms to incorporate a UAS-based approach into existing forestry monitoring schemes. Digital imagery from a UAS was collected, photogrammetrically processed, and compared to in situ and aerial laser scanning (ALS)-derived plot tree counts and heights on a subsample of national forest plots in Oregon. UAS- and ALS-estimated tree counts agreed with each other (r2 = 0.96) and with field data (ALS r2 = 0.93, UAS r2 = 0.84). UAS photogrammetry also reasonably approximated mean plot tree height achieved by the field inventory (r2 = 0.82, RMSE = 2.92 m) and by ALS (r2 = 0.97, RMSE = 1.04 m). The use of both nadir-oriented and oblique UAS imagery as well as the availability of ALS-derived terrain descriptions likely sustain a robust performance of our approach across classes of canopy cover and tree height. It is possible to draw similar conclusions from any of the methods, suggesting that the efficient and responsive UAS method can enhance field measurement and ALS in longitudinal inventories. Additionally, advancing UAS technology and photogrammetry allows diverse users access to forest data and integrates updated methodologies with traditional forest monitoring.

scholarly journals Measuring Height Characteristics of Sagebrush (Artemisia sp.) Using Imagery Derived from Small Unmanned Aerial Systems (sUAS)

Drones ◽  
2020 ◽  
Vol 4 (1) ◽  
pp. 6 ◽  
Author(s):  
Ryan G. Howell ◽  
Ryan R. Jensen ◽  
Steven L. Petersen ◽  
Randy T. Larsen
Keyword(s):  
Data Storage ◽  
Accuracy Assessment ◽  
Point Clouds ◽  
Unmanned Aerial Systems ◽  
Surface Model ◽  
Sage Grouse ◽  
Double Pass ◽  
Single Pass ◽  
3D Point Clouds ◽  
Aerial Systems

In situ measurements of sagebrush have traditionally been expensive and time consuming. Currently, improvements in small Unmanned Aerial Systems (sUAS) technology can be used to quantify sagebrush morphology and community structure with high resolution imagery on western rangelands, especially in sensitive habitat of the Greater sage-grouse (Centrocercus urophasianus). The emergence of photogrammetry algorithms to generate 3D point clouds from true color imagery can potentially increase the efficiency and accuracy of measuring shrub height in sage-grouse habitat. Our objective was to determine optimal parameters for measuring sagebrush height including flight altitude, single- vs. double- pass, and continuous vs. pause features. We acquired imagery using a DJI Mavic Pro 2 multi-rotor Unmanned Aerial Vehicle (UAV) equipped with an RGB camera, flown at 30.5, 45, 75, and 120 m and implementing single-pass and double-pass methods, using continuous flight and paused flight for each photo method. We generated a Digital Surface Model (DSM) from which we derived plant height, and then performed an accuracy assessment using on the ground measurements taken at the time of flight. We found high correlation between field measured heights and estimated heights, with a mean difference of approximately 10 cm (SE = 0.4 cm) and little variability in accuracy between flights with different heights and other parameters after statistical correction using linear regression. We conclude that higher altitude flights using a single-pass method are optimal to measure sagebrush height due to lower requirements in data storage and processing time.

scholarly journals Evaluating the Capability of Unmanned Aerial System (UAS) Imagery to Detect and Measure the Effects of Edge Influence on Forest Canopy Cover in New England

Forests ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1252
Author(s):  
Heather Grybas ◽  
Russell G. Congalton
Keyword(s):  
New England ◽  
Forest Canopy ◽  
Canopy Cover ◽  
Point Clouds ◽  
Forest Edge ◽  
P Value ◽  
Unmanned Aerial Systems ◽  
Forest Edges ◽  
Significant Edge ◽  
The Face

Characterizing and measuring the extent of change at forest edges is important for making management decisions, especially in the face of climate change, but is difficult due to the large number of factors that can modify the response. Unmanned aerial systems (UAS) imagery may serve as a tool to detect and measure the forest response at the edge quickly and repeatedly, thus allowing a larger amount of area to be covered with less work. This study is a preliminary attempt to utilize UAS imagery to detect changes in canopy cover, known to exhibit changes due to edge influences, across forest edges in a New England forest. Changes in canopy cover with increasing distance from the forest edge were measured on the ground using digital cover photography and from photogrammetric point clouds and imagery-based maps of canopy gaps produced with UAS imagery. The imagery-based canopy gap products were significantly more similar to ground estimates for canopy cover (p value > 0.05) than the photogrammetric point clouds, but still suffered overestimation (RMSE of 0.088) due to the inability to detect small canopy openings. Both the ground and UAS data were able to detect a decrease in canopy cover to between 45–50 m from the edge, followed by an increase to 100 m. The UAS data had the advantage of a greater sampling intensity and was thus better able to detect a significant edge effect of minimal magnitude effect in the presence of heavy variability.

scholarly journals AUTOMATED STRUCTURAL FOREST CHANGES USING LIDAR POINT CLOUDS AND GIS ANALYSES

2021 ◽  
Vol XLIII-B3-2021 ◽  
pp. 603-608
Author(s):  
A. Novo ◽  
H. González-Jorge ◽  
J. Martínez-Sánchez ◽  
J. M. Fernández-Alonso ◽  
H. Lorenzo
Keyword(s):  
Spatial Data ◽  
Forest Structure ◽  
Laser Scanning ◽  
Structural Model ◽  
Canopy Cover ◽  
Ground Truth ◽  
Point Clouds ◽  
Forest Community ◽  
Structural Behaviour ◽  
Ground Truth Data

Abstract. Forest spatial structure describes the relationships among different species in the same forest community. Automation in the monitoring of the structural forest changes and forest mapping is one of the main utilities of applications of modern geoinformatics methods. The obtaining objective information requires the use of spatial data derived from photogrammetry and remote sensing. This paper investigates the possibility of applying light detection and ranging (LiDAR) point clouds and geographic information system (GIS) analyses for automated mapping and detection changes in vegetation structure during a year of study. The research was conducted in an area of the Ourense Province (NWSpain). The airborne laser scanning (ALS) data, acquired in August 2019 and June of 2020, reveal detailed changes in forest structure. Based on ALS data the vegetation parameters will be analysed.To study the structural behaviour of the tree vegetation, the following parameters are used in each one of the sampling areas: (1) Relationship between the tree species present and their stratification; (2) Vegetation classification in fuel types; (3) Biomass (Gi); (4) Number of individuals per area; and (5) Canopy cover fraction (CCF). Besides, the results were compared with the ground truth data recollected in the study area.The development of a quantitative structural model based on Aerial Laser Scanning (ALS) point clouds was proposed to accurately estimate tree attributes automatically and to detect changes in forest structure. Results of statistical analysis of point cloud show the possibility to use UAV LiDAR data to characterize changes in the structure of vegetation.

scholarly journals Validating UAS-Based Photogrammetry with Traditional Topographic Methods for Surveying Dune Ecosystems in the Spanish Mediterranean Coast

2019 ◽  
Vol 7 (9) ◽  
pp. 297 ◽  
Author(s):  
Luis Bañón ◽  
José Ignacio Pagán ◽  
Isabel López ◽  
Carlos Banon ◽  
Luis Aragonés
Keyword(s):  
Low Cost ◽  
Temporal Frequency ◽  
Satellite System ◽  
Mean Value ◽  
Mediterranean Coast ◽  
Unmanned Aerial Systems ◽  
Aerial Photogrammetry ◽  
The One ◽  
Global Navigation Satellite ◽  
Aerial Systems

In the past few years, unmanned aerial systems (UAS) have achieved great popularity for civil uses. One of the present main uses of these devices is low-cost aerial photogrammetry, being especially useful in coastal environments. In this work, a high-resolution 3D model of a beach section in Guardamar del Segura (Spain) has been produced by employing a low maximum takeoff mass (MTOM) UAS, in combination with the use of structure-from-motion (SfM) techniques. An unprecedented extensive global navigation satellite system (GNSS) survey was simultaneously carried out to statistically validate the model by employing 1238 control points for that purpose. The results show good accuracy, obtaining a vertical root mean square error (RMSE) mean value of 0.121 m and a high point density, close to 30 pt/m2, with similar or even higher quality than most coastal surveys performed with classical techniques. UAS technology permits the acquisition of topographic data with low time-consuming surveys at a high temporal frequency. Coastal managers can implement this methodology into their workflow to study the evolution of complex, highly anthropized dune-beach systems such as the one presented in this study, obtaining more accurate surveys at lower costs.

scholarly journals Merging Unmanned Aerial Systems (UAS) Imagery and Echo Soundings with an Adaptive Sampling Technique for Bathymetric Surveys

2018 ◽  
Vol 10 (9) ◽  
pp. 1362 ◽  
Author(s):  
Laura Alvarez ◽  
Hernan Moreno ◽  
Antonio Segales ◽  
Tri Pham ◽  
Elizabeth Pillar-Little ◽  
...  
Keyword(s):  
Adaptive Sampling ◽  
Low Cost ◽  
Sampling Technique ◽  
Ground Truth ◽  
Accurate Method ◽  
Unmanned Aerial Systems ◽  
Southern Plains ◽  
Ground Truth Data ◽  
Light Passing ◽  
Aerial Systems

Bathymetric surveying to gather information about depths and underwater terrain is increasingly important to the sciences of hydrology and geomorphology. Submerged terrain change detection, water level, and reservoir storage monitoring demand extensive bathymetric data. Despite often being scarce or unavailable, this information is fundamental to hydrodynamic modeling for imposing boundary conditions and building computational domains. In this manuscript, a novel, low-cost, rapid, and accurate method is developed to measure submerged topography, as an alternative to conventional approaches that require significant economic investments and human power. The method integrates two types of Unmanned Aerial Systems (UAS) sampling techniques. The first couples a small UAS (sUAS) to an echosounder attached to a miniaturized boat for surveying submerged topography in deeper water within the range of accuracy. The second uses Structure from Motion (SfM) photogrammetry to cover shallower water areas no detected by the echosounder where the bed is visible from the sUAS. The refraction of light passing through air–water interface is considered for improving the bathymetric results. A zonal adaptive sampling algorithm is developed and applied to the echosounder data to densify measurements where the standard deviation of clustered points is high. This method is tested at a small reservoir in the U.S. southern plains. Ground Control Points (GCPs) and checkpoints surveyed with a total station are used for properly georeferencing of the SfM photogrammetry and assessment of the UAS imagery accuracy. An independent validation procedure providing a number of skill and error metrics is conducted using ground-truth data collected with a leveling rod at co-located reservoir points. Assessment of the results shows a strong correlation between the echosounder, SfM measurements and the field observations. The final product is a hybrid bathymetric survey resulting from the merging of SfM photogrammetry and echosoundings within an adaptive sampling framework.

scholarly journals An Evaluation of the Effects of UAS Flight Parameters on Digital Aerial Photogrammetry Processing and Dense-Cloud Production Quality in a Scots Pine Forest

2021 ◽  
Vol 13 (6) ◽  
pp. 1121
Author(s):  
Raul Sampaio de Lima ◽  
Mait Lang ◽  
Niall G. Burnside ◽  
Miguel Villoslada Peciña ◽  
Tauri Arumäe ◽  
...  
Keyword(s):  
Data Acquisition ◽  
Laser Scanning ◽  
Model Fitting ◽  
Ground Level ◽  
Point Clouds ◽  
Production Quality ◽  
Unmanned Aerial Systems ◽  
Aerial Photogrammetry ◽  
Wide Range ◽  
Scots Pine Forest

The application of unmanned aerial systems (UAS) in forest research includes a wide range of equipment, systems, and flight settings, creating a need for enhancing data acquisition efficiency and quality. Thus, we assessed the effects of flying altitude and lateral and longitudinal overlaps on digital aerial photogrammetry (DAP) processing and the ability of its products to provide point clouds for forestry inventory. For this, we used 18 combinations of flight settings for data acquisition, and a nationwide airborne laser scanning (ALS) dataset as reference data. Linear regression was applied for modeling DAP quality indicators and model fitting quality as the function of flight settings; equivalence tests compared DAP- and ALS-products. Most of DAP-Digital Terrain Models (DTM) showed a moderate to high agreement (R2 > 0.70) when fitted to ALS-based models; nine models had a regression slope within the 1% region of equivalence. The best DAP-Canopy Height Model (CHM) was generated using ALS-DTM with an R2 = 0.42 when compared with ALS-CHM, indicating reduced similarity. Altogether, our results suggest that the optimal combination of flight settings should include a 90% lateral overlap, a 70% longitudinal overlap, and a minimum altitude of 120 m above ground level, independent of the availability of an ALS-derived DTM for height normalization. We also provided insights into the effects of flight settings on DAP outputs for future applications in similar forest stands, emphasizing the benefits of overlaps for comprehensive scene reconstruction and altitude for canopy surface detection.

Sign in / Sign up

Export Citation Format

Share Document