scholarly journals Greenhouse Crop Identification from Multi-Temporal Multi-Sensor Satellite Imagery Using Object-Based Approach: A Case Study from Almería (Spain)

2018 ◽  
Vol 10 (11) ◽  
pp. 1751 ◽  
Author(s):  
Abderrahim Nemmaoui ◽  
Manuel A. Aguilar ◽  
Fernando J. Aguilar ◽  
Antonio Novelli ◽  
Andrés García Lorca
Keyword(s):  
Time Series ◽  
Binary Classification ◽  
Free Access ◽  
Landsat 8 ◽  
Horticultural Crops ◽  
Command Line Tool ◽  
Multi Temporal ◽  
Tree Models ◽  
Sentinel 2A

A workflow headed up to identify crops growing under plastic-covered greenhouses (PCG) and based on multi-temporal and multi-sensor satellite data is developed in this article. This workflow is made up of four steps: (i) data pre-processing, (ii) PCG segmentation, (iii) binary pre-classification between greenhouses and non-greenhouses, and (iv) classification of horticultural crops under greenhouses regarding two agronomic seasons (autumn and spring). The segmentation stage was carried out by applying a multi-resolution segmentation algorithm on the pre-processed WorldView-2 data. The free access AssesSeg command line tool was used to determine the more suitable multi-resolution algorithm parameters. Two decision tree models mainly based on the Plastic Greenhouse Index were developed to perform greenhouse/non-greenhouse binary classification from Landsat 8 and Sentinel-2A time series, attaining overall accuracies of 92.65% and 93.97%, respectively. With regards to the classification of crops under PCG, pepper in autumn, and melon and watermelon in spring provided the best results (Fβ around 84% and 95%, respectively). Data from the Sentinel-2A time series showed slightly better accuracies than those from Landsat 8.

scholarly journals Comparison of Multi-Temporal PlanetScope Data with Landsat 8 and Sentinel-2 Data for Estimating Airborne LiDAR Derived Canopy Height in Temperate Forests

2020 ◽  
Vol 12 (11) ◽  
pp. 1876 ◽  
Author(s):  
Katsuto Shimizu ◽  
Tetsuji Ota ◽  
Nobuya Mizoue ◽  
Hideki Saito
Keyword(s):  
Time Series ◽  
Prediction Accuracy ◽  
Time Series Data ◽  
Airborne Lidar ◽  
Canopy Height ◽  
Forest Monitoring ◽  
Series Data ◽  
Landsat 8 ◽  
Multi Temporal ◽  
Sentinel 2

Developing accurate methods for estimating forest structures is essential for efficient forest management. The high spatial and temporal resolution data acquired by CubeSat satellites have desirable characteristics for mapping large-scale forest structural attributes. However, most studies have used a median composite or single image for analyses. The multi-temporal use of CubeSat data may improve prediction accuracy. This study evaluates the capabilities of PlanetScope CubeSat data to estimate canopy height derived from airborne Light Detection and Ranging (LiDAR) by comparing estimates using Sentinel-2 and Landsat 8 data. Random forest (RF) models using a single composite, multi-seasonal composites, and time-series data were investigated at different spatial resolutions of 3, 10, 20, and 30 m. The highest prediction accuracy was obtained by the PlanetScope multi-seasonal composites at 3 m (relative root mean squared error: 51.3%) and Sentinel-2 multi-seasonal composites at the other spatial resolutions (40.5%, 35.2%, and 34.2% for 10, 20, and 30 m, respectively). The results show that RF models using multi-seasonal composites are 1.4% more accurate than those using harmonic metrics from time-series data in the median. PlanetScope is recommended for canopy height mapping at finer spatial resolutions. However, the unique characteristics of PlanetScope data in a spatial and temporal context should be further investigated for operational forest monitoring.

scholarly journals Forest Type Identification with Random Forest Using Sentinel-1A, Sentinel-2A, Multi-Temporal Landsat-8 and DEM Data

2018 ◽  
Vol 10 (6) ◽  
pp. 946 ◽  
Author(s):  
Yanan Liu ◽  
Weishu Gong ◽  
Xiangyun Hu ◽  
Jianya Gong
Keyword(s):  
Random Forest ◽  
Forest Type ◽  
Landsat 8 ◽  
Multi Temporal ◽  
Sentinel 2A

scholarly journals Phybrata Sensors and Machine Learning for Enhanced Neurophysiological Diagnosis and Treatment

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7417
Author(s):  
Alex J. Hope ◽  
Utkarsh Vashisth ◽  
Matthew J. Parker ◽  
Andreas B. Ralston ◽  
Joshua M. Roper ◽  
...  
Keyword(s):  
Machine Learning ◽  
Time Series ◽  
Random Forest ◽  
Binary Classification ◽  
Classification Performance ◽  
Support Vector ◽  
Use Case ◽  
Signal Features ◽  
Test Population

Concussion injuries remain a significant public health challenge. A significant unmet clinical need remains for tools that allow related physiological impairments and longer-term health risks to be identified earlier, better quantified, and more easily monitored over time. We address this challenge by combining a head-mounted wearable inertial motion unit (IMU)-based physiological vibration acceleration (“phybrata”) sensor and several candidate machine learning (ML) models. The performance of this solution is assessed for both binary classification of concussion patients and multiclass predictions of specific concussion-related neurophysiological impairments. Results are compared with previously reported approaches to ML-based concussion diagnostics. Using phybrata data from a previously reported concussion study population, four different machine learning models (Support Vector Machine, Random Forest Classifier, Extreme Gradient Boost, and Convolutional Neural Network) are first investigated for binary classification of the test population as healthy vs. concussion (Use Case 1). Results are compared for two different data preprocessing pipelines, Time-Series Averaging (TSA) and Non-Time-Series Feature Extraction (NTS). Next, the three best-performing NTS models are compared in terms of their multiclass prediction performance for specific concussion-related impairments: vestibular, neurological, both (Use Case 2). For Use Case 1, the NTS model approach outperformed the TSA approach, with the two best algorithms achieving an F1 score of 0.94. For Use Case 2, the NTS Random Forest model achieved the best performance in the testing set, with an F1 score of 0.90, and identified a wider range of relevant phybrata signal features that contributed to impairment classification compared with manual feature inspection and statistical data analysis. The overall classification performance achieved in the present work exceeds previously reported approaches to ML-based concussion diagnostics using other data sources and ML models. This study also demonstrates the first combination of a wearable IMU-based sensor and ML model that enables both binary classification of concussion patients and multiclass predictions of specific concussion-related neurophysiological impairments.

scholarly journals In-Season Mapping of Irrigated Crops Using Landsat 8 and Sentinel-1 Time Series

2019 ◽  
Vol 11 (2) ◽  
pp. 118 ◽  
Author(s):  
Valérie Demarez ◽  
Florian Helen ◽  
Claire Marais-Sicre ◽  
Frédéric Baup
Keyword(s):  
Time Series ◽  
Shuttle Radar Topography Mission ◽  
Irrigation Scheduling ◽  
Landsat 8 ◽  
Radar Images ◽  
Optical Images ◽  
Multi Temporal ◽  
Irrigated Crops ◽  
Elevation Model ◽  
The Impact

Numerous studies have reported the use of multi-spectral and multi-temporal remote sensing images to map irrigated crops. Such maps are useful for water management. The recent availability of optical and radar image time series such as the Sentinel data offers new opportunities to map land cover with high spatial and temporal resolutions. Early identification of irrigated crops is of major importance for irrigation scheduling, but the cloud coverage might significantly reduce the number of available optical images, making crop identification difficult. SAR image time series such as those provided by Sentinel-1 offer the possibility of improving early crop mapping. This paper studies the impact of the Sentinel-1 images when used jointly with optical imagery (Landsat8) and a digital elevation model of the Shuttle Radar Topography Mission (SRTM). The study site is located in a temperate zone (southwest France) with irrigated maize crops. The classifier used is the Random Forest. The combined use of the different data (radar, optical, and SRTM) improves the early classifications of the irrigated crops (k = 0.89) compared to classifications obtained using each type of data separately (k = 0.84). The use of the DEM is significant for the early stages but becomes useless once crops have reached their full development. In conclusion, compared to a “full optical” approach, the “combined” method is more robust over time as radar images permit cloudy conditions to be overcome.

scholarly journals Advanced radar-interpretation of InSAR time series for mapping and characterization of geological processes

2011 ◽  
Vol 11 (3) ◽  
pp. 865-881 ◽  
Author(s):  
F. Cigna ◽  
C. Del Ventisette ◽  
V. Liguori ◽  
N. Casagli
Keyword(s):  
Time Series ◽  
Field Surveys ◽  
Synthetic Aperture Radar Interferometry ◽  
Geological Processes ◽  
Multi Temporal ◽  
Under Sampling ◽  
Temporal Measures

Abstract. We present a new post-processing methodology for the analysis of InSAR (Synthetic Aperture Radar Interferometry) multi-temporal measures, based on the temporal under-sampling of displacement time series, the identification of potential changes occurring during the monitoring period and, eventually, the classification of different deformation behaviours. The potentials of this approach for the analysis of geological processes were tested on the case study of Naro (Italy), specifically selected due to its geological setting and related ground instability of unknown causes that occurred in February 2005. The time series analysis of past (ERS1/2 descending data; 1992–2000) and current (RADARSAT-1 ascending data; 2003–2007) ground movements highlighted significant displacement rates (up to 6 mm yr−1) in 2003–2007, followed by a post-event stabilization. The deformational behaviours of instable areas involved in the 2005 event were also detected, clarifying typology and kinematics of ground instability. The urban sectors affected and unaffected by the event were finally mapped, consequently re-defining and enlarging the influenced area previously detected by field observations. Through the integration of InSAR data and conventional field surveys (i.e. geological, geomorphologic and geostructural campaigns), the causes of instability were finally attributed to tectonics.

scholarly journals Using SAR satellite data time-series for regional glacier mapping

2017 ◽  
Author(s):  
Solveig H. Winsvold ◽  
Andreas Kääb ◽  
Christopher Nuth ◽  
Liss M. Andreassen ◽  
Ward van Pelt ◽  
...  
Keyword(s):  
Time Series ◽  
Satellite Data ◽  
Time Series Data ◽  
Series Representation ◽  
Series Data ◽  
Landsat 8 ◽  
Change Analysis ◽  
Surface Mass ◽  
Sentinel 2A ◽  
Optical Satellite Images

Abstract. With dense SAR satellite data time-series it is possible to map surface and subsurface glacier properties that vary in time. On Sentinel-1A and Radarsat-2 backscatter images over mainland Norway and Svalbard, we have used descriptive methods for outlining the possibilities of using SAR time-series for mapping glaciers. We present five application scenarios, where the first shows potential for tracking transient snow lines with SAR backscatter time-series, and correlates with both optical satellite images (Sentinel-2A and Landsat 8) and equilibrium line altitudes derived from in situ surface mass balance data. In the second application scenario, time-series representation of glacier facies corresponding to SAR glacier zones shows potential for a more accurate delineation of the zones and how they change in time. The third application scenario investigates the firn evolution using dense SAR backscatter time-series together with a coupled energy balance and multi-layer firn model. We find strong correlation between backscatter signals with both the modeled firn air-content and modeled wetness in the firn. In the fourth application scenario, we highlight how winter rain events can be detected in SAR time-series, revealing important information about the area extent of internal accumulation. Finally, in the last application scenario, averaged summer SAR images were found to have potential in assisting the process of mapping glaciers outlines, especially in the presence of seasonal snow. Altogether we present examples of how to map glaciers and to further understand glaciological processes using the existing and future massive amount of multi-sensor time-series data. Our results reveal the potential of satellite imagery for automatically derived products as important input in modeling assessments and glacier change analysis.

scholarly journals RELATIVE RADIOMETRIC NORMALIZATION USING SEVERAL AUTOMATICALLY CHOSEN REFERENCE IMAGES FOR MULTI-SENSOR, MULTI-TEMPORAL SERIES

2020 ◽  
Vol V-2-2020 ◽  
pp. 845-852
Author(s):  
C. Hessel ◽  
R. Grompone von Gioi ◽  
J. M. Morel ◽  
G. Facciolo ◽  
P. Arias ◽  
...  
Keyword(s):  
Time Series ◽  
Atmospheric Correction ◽  
Linear Interpolation ◽  
Landsat 8 ◽  
Quality Metric ◽  
Multi Temporal ◽  
Reference Images ◽  
Random Sample Consensus ◽  
Affine Correction ◽  
Sentinel 2

Abstract. We propose a method for the relative radiometric normalization of long, multi-sensor image time series. This allows to increase the revisit time under comparable conditions. Although the relative radiometric normalization is a well-studied problem in the remote sensing community, the availability of an increasing number of images gives rise to new problems. For example, given long series spanning several years, finding features that are maintained through the whole period of time becomes arduous. Instead, we propose in this paper to use automatically detected reference images chosen by maximization of a quality metric. For each image, two affine correction models are robustly estimated using random sample consensus, using the two closest reference images; the final correction is obtained by linear interpolation. For each pair of source and reference images, pseudo-invariant features are obtained using a similarity measure invariant to radiometric changes. A final tone-mapping step outputs the images in the standard 8-bits range. This method is illustrated by the fusion of time series of Sentinel-2 at correction levels 1C, 2A, and Landsat-8 images. By using only the atmospherically corrected Sentinel-2 L2A images as anchors, the full output series inherits this atmospheric correction.

scholarly journals COMPARISON OF LANDSAT-8 AND SENTINEL-2 DATA FOR CLASSIFICATION OF RABI CROPS OVER KARNATAKA, INDIA

2019 ◽  
Vol XLII-3/W6 ◽  
pp. 579-584
Author(s):  
S. Paul ◽  
D. N. Kumar
Keyword(s):  
Vegetation Index ◽  
Support Vector ◽  
Growth Stages ◽  
Landsat 8 ◽  
Large Spatial Scale ◽  
Spectral Bands ◽  
Sentinel 2A ◽  
Rabi Crops ◽  
Sentinel 2

<p><strong>Abstract.</strong> Classification of crops is very important to study different growth stages and forecast yield. Remote sensing data plays a significant role in crop identification and condition assessment over a large spatial scale. Importance of Normalized Difference Indices (NDIs) along with surface reflectances of remotely sensed spectral bands have been evaluated for classification of eight types of Rabi crops utilizing the Landsat-8 and Sentinel-2 datasets and performances of both the satellites are compared. Landsat-8 and Sentinel-2A images are acquired for the location of crops and seven and nine spectral bands are utilized respectively for the classification. Experiments are carried out considering the different combinations of surface reflectances of spectral bands and optimal NDIs as features in support vector machine classifier. Optimal NDIs are selected from the set of <sup>7</sup>C<sub>2</sub> and <sup>9</sup>C<sub>2</sub> NDIs of Landsat-8 and Sentinel-2A datasets respectively using the partial informational correlation measure, a nonparametric feature selection approach. Few important vegetation indices (e.g. enhanced vegetation index) are also experimented in combination with the surface reflectances and NDIs to perform the crop classification. It has been observed that combination of surface reflectances and optimal NDIs can classify the crops more efficiently. The average overall accuracy of 80.96% and 88.16% are achieved using the Landsat-8 and Sentinel-2A datasets respectively. It has been observed that all the crop classes except Paddy and Cotton achieve producer accuracy and user accuracy of more than 75% and 85% respectively. This technique can be implemented for crop identification with adequate accessibility of crop information.</p>

scholarly journals Using SAR satellite data time series for regional glacier mapping

2018 ◽  
Vol 12 (3) ◽  
pp. 867-890 ◽  
Author(s):  
Solveig H. Winsvold ◽  
Andreas Kääb ◽  
Christopher Nuth ◽  
Liss M. Andreassen ◽  
Ward J. J. van Pelt ◽  
...  
Keyword(s):  
Time Series ◽  
Satellite Data ◽  
Time Series Data ◽  
Series Representation ◽  
Series Data ◽  
Landsat 8 ◽  
Surface Mass ◽  
Rain Events ◽  
Sentinel 2A ◽  
Optical Satellite Images

Abstract. With dense SAR satellite data time series it is possible to map surface and subsurface glacier properties that vary in time. On Sentinel-1A and RADARSAT-2 backscatter time series images over mainland Norway and Svalbard, we outline how to map glaciers using descriptive methods. We present five application scenarios. The first shows potential for tracking transient snow lines with SAR backscatter time series and correlates with both optical satellite images (Sentinel-2A and Landsat 8) and equilibrium line altitudes derived from in situ surface mass balance data. In the second application scenario, time series representation of glacier facies corresponding to SAR glacier zones shows potential for a more accurate delineation of the zones and how they change in time. The third application scenario investigates the firn evolution using dense SAR backscatter time series together with a coupled energy balance and multilayer firn model. We find strong correlation between backscatter signals with both the modeled firn air content and modeled wetness in the firn. In the fourth application scenario, we highlight how winter rain events can be detected in SAR time series, revealing important information about the area extent of internal accumulation. In the last application scenario, averaged summer SAR images were found to have potential in assisting the process of mapping glaciers outlines, especially in the presence of seasonal snow. Altogether we present examples of how to map glaciers and to further understand glaciological processes using the existing and future massive amount of multi-sensor time series data.

Sign in / Sign up

Export Citation Format

Share Document