scholarly journals Mesoscale Resolution Radar Data Assimilation Experiments with the Harmonie Model

2018 ◽  
Vol 10 (9) ◽  
pp. 1453 ◽  
Author(s):  
Serguei Ivanov ◽  
Silas Michaelides ◽  
Igor Ruban
Keyword(s):  
Data Assimilation ◽  
Weather Prediction ◽  
Precipitable Water ◽  
Original Data ◽  
Radar Data ◽  
Numerical Weather Prediction Model ◽  
Radar Reflectivity ◽  
Horizontal Structure ◽  
Cell Patterns ◽  
Reflectivity Data

This study presents a pre-processing approach adopted for the radar reflectivity data assimilation and results of simulations with the Harmonie numerical weather prediction model. The proposed method creates a 3D regular grid in which a horizontal size of meshes coincides with the horizontal model resolution. This minimizes the representative error associated with the discrepancy between resolutions of informational sources. After such preprocessing, horizontal structure functions and their gradients for radar reflectivity maintain the sizes and shapes of precipitation patterns similar to those of the original data. The method shows an improvement of precipitation prediction within the radar location area in both the rain rates and spatial pattern presentation. It redistributes precipitable water with smoothed values over the common domain since the control runs show, among several sub-domains with increased and decreased values, correspondingly. It also reproduces the mesoscale belts and cell patterns of sizes from a few to ten kilometers in precipitation fields. With the assimilation of radar data, the model simulates larger water content in the middle troposphere within the layer from 1 km to 6 km with major variations at 2.5 km to 3 km. It also reproduces the mesoscale belt and cell patterns of precipitation fields.

scholarly journals Mesoscale Resolution Radar Data Assimilation Experiments with the Harmonie Model

2018 ◽  
Author(s):  
Serguei Ivanov ◽  
Silas Michaelides ◽  
Igor Ruban
Keyword(s):  
Data Assimilation ◽  
Weather Prediction ◽  
Radar Data ◽  
Numerical Weather Prediction Model ◽  
Precipitation Prediction ◽  
Cell Patterns ◽  
Reflectivity Data ◽  
Rain Rates ◽  
Pattern Presentation ◽  
Radar Data Assimilation

This study presents a pre-processing approach adopted for the radar reflectivity data assimilation and results of simulations with the Harmonie numerical weather prediction model. The method shows an improvement of precipitation prediction within the radar location area in both the rain rates and spatial pattern presentation. With the assimilation of radar data, the model simulates larger water content in the middle troposphere within the layer from 1 to 6 km, with major variations at 2.5–3 km; it also reproduces better the mesoscale belt and cell patterns of precipitation fields.

An Approach of Radar Reflectivity Data Assimilation and Its Assessment with the Inland QPF of Typhoon Rusa (2002) at Landfall

2007 ◽  
Vol 46 (1) ◽  
pp. 14-22 ◽  
Author(s):  
Qingnong Xiao ◽  
Ying-Hwa Kuo ◽  
Juanzhen Sun ◽  
Wen-Chau Lee ◽  
Dale M. Barker ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Doppler Radar ◽  
Mesoscale Model ◽  
Control Variable ◽  
Three Dimensional ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Mixing Ratio ◽  
Warm Rain Process ◽  
Reflectivity Data

Abstract A radar reflectivity data assimilation scheme was developed within the fifth-generation Pennsylvania State University–National Center for Atmospheric Research Mesoscale Model (MM5) three-dimensional variational data assimilation (3DVAR) system. The model total water mixing ratio was used as a control variable. A warm-rain process, its linear, and its adjoint were incorporated into the system to partition the moisture and hydrometeor increments. The observation operator for radar reflectivity was developed and incorporated into the 3DVAR. With a single reflectivity observation, the multivariate structures of the analysis increments that included cloud water and rainwater mixing ratio increments were examined. Using the onshore Doppler radar data from Jindo, South Korea, the capability of the radar reflectivity assimilation for the landfalling Typhoon Rusa (2002) was assessed. Verifications of inland quantitative precipitation forecasting (QPF) of Typhoon Rusa (2002) showed positive impacts of assimilating radar reflectivity data on the short-range QPF.

scholarly journals Case Study of a Retrieval Method of 3D Proxy Reflectivity from FY-4A Lightning Data and Its Impact on the Assimilation and Forecasting for Severe Rainfall Storms

2020 ◽  
Vol 12 (7) ◽  
pp. 1165 ◽  
Author(s):  
Yaodeng Chen ◽  
Zheng Yu ◽  
Wei Han ◽  
Jing He ◽  
Min Chen
Keyword(s):  
Data Assimilation ◽  
Weather Prediction ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Mountainous Areas ◽  
Wind Fields ◽  
Moisture Condition ◽  
Eastern Hemisphere ◽  
Skill Scores ◽  
Logarithmic Relationship

As the first Geostationary Satellite with the LMI (Lightning Mapping Imager) instrument aboard running over the eastern hemisphere, FY-4A (Feng-Yun-4A) can better indicate severe convection and compensate for the limitations of radar observation in temporal and spatial resolution. In order to realize the application of FY-4A lightning data in numerical weather prediction (NWP) models, a logarithmic relationship between FY-4A lightning density and maximum radar reflectivity is presented to convert FY-4A lightning data into maximum FY-4A proxy reflectivity. Then, according to the profiles of radar reflectivity, the maximum FY-4A proxy reflectivity is extended to 3D FY-4A proxy reflectivity. Finally, the 3D FY-4A proxy reflectivity is assimilated in RMAPS-ST (Rapid-refresh Multi-scale Analysis and Prediction System—Short Term) to compare with radar assimilation. Four groups of continuous cycling data assimilation and forecasting experiments are carried out for a severe rainfall case. The results demonstrate that cycling assimilation of 3D FY-4A proxy reflectivity can adjust the moisture condition effectively, and indirectly affects the temperature and wind fields, then makes the thermal and dynamic analysis more reasonable. The Fractions Skill Scores (FSSs) show that the rainfall forecasts are improved significantly within 6 h by assimilating 3D FY-4A proxy reflectivity, which is similar to the parallel experiments in assimilating radar reflectivity. In addition, other cycling data assimilation experiments are carried out in mountainous areas without radar data. The improvement of precipitation forecasts in mountainous areas further proves that the application of assimilating 3D FY-4A proxy reflectivity can be considered a useful substitute where observed radar data are missing. Through the two severe rainfall cases, this method could be framed as an example of how to use lightning for data assimilation.

Improved Prediction of Landfalling Tropical Cyclone in China Based on Assimilation of Radar Radial Winds with New Super-Observation Processing

2020 ◽  
Vol 35 (6) ◽  
pp. 2523-2539
Author(s):  
Jianing Feng ◽  
Yihong Duan ◽  
Qilin Wan ◽  
Hao Hu ◽  
Zhaoxia Pu
Keyword(s):  
Data Assimilation ◽  
Inner Core ◽  
Doppler Radar ◽  
Weather Prediction ◽  
Extreme Rainfall ◽  
Radar Data ◽  
Numerical Weather Prediction Model ◽  
Previous Method ◽  
Horizontal Wind ◽  
The Impact

AbstractThis work explores the impact of assimilating radial winds from the Chinese coastal Doppler radar on track, intensity, and quantitative precipitation forecasts (QPF) of landfalling tropical cyclones (TCs) in a numerical weather prediction model, focusing mainly on two aspects: 1) developing a new coastal radar super-observation (SO) processing method, namely, an evenly spaced thinning method (ESTM) that is fit for landfalling TCs, and 2) evaluating the performance of the radar radial wind data assimilation in QPFs of landfalling TCs with multiple TC cases. Compared to a previous method of generating SOs (i.e., the radially spaced thinning method), in which the density of SOs is equal within the radial space of a radar scanning volume, the SOs created by ESTM are almost evenly distributed in the horizontal grids of the model background, resulting in more observations located in the TC inner-core region being involved in SOs. The use of SOs from ESTM leads to more cyclonic wind innovation, and larger analysis increments of height and horizontal wind in the lower level in an ensemble Kalman filter data assimilation experiment with TC Mujigae (2015). Overall, forecasts of a TC’s landfalling position, intensity, and QPF are improved by radar data assimilation for all cases, including Mujigae and the other eight TCs that made landfall on the Chinese mainland in 2017. Specifically, through assimilation, TC landing position error and intensity error are reduced by 33% and 25%, respectively. The mean equitable threat score of extreme rainfall [>80 mm (3 h)−1] forecasts is doubled on average over all cases.

A Case Study of Weather Radar Data Assimilation into the Harmonie Numerical Weather Prediction System

2020 ◽  
Author(s):  
Silas Michaelides ◽  
Serguei Ivanov ◽  
Igor Ruban ◽  
Demetris Charalambous ◽  
Filippos Tymvios
Keyword(s):  
Data Assimilation ◽  
Numerical Weather Prediction ◽  
Frontal Zone ◽  
Weather Prediction ◽  
Precipitable Water ◽  
Radar Data ◽  
Severe Weather ◽  
Numerical Weather ◽  
Radar Data Assimilation

<p>Quantitative Precipitation Forecasting (QPF) is among the most central challenges of atmospheric prediction systems. The primary aim of such a task is the generation of accurate estimates of heavy precipitation events associated with severe weather, atmospheric fronts and heavy convective rainfalls. QPF is still among the most intricate challenges of Numerical Weather Prediction. The efforts in this direction are mainly concentrated on improving model formulations for microphysics and convective process and remote sensing data assimilation.</p><p>This paper describes the first results with the regional radar signal processing chain that provides the radar data assimilation (RDA) in the Harmonie convection permitting numerical model. This task is performed for a case study focusing on a wintertime frontal cyclone over the island of Cyprus. Reflectivity measurements from two weather radars, at Larnaka and Paphos, are exploited for simulations of severe weather conditions associated with this synoptic-scale system. Through the variational assimilation procedure, the model takes into account the atmospheric processes occurring in the upstream flow which can be outside the area of radar measurements. The focus is on the precipitable water vapor content and its changes during the cyclone evolution, as well as on the impact of the radar data assimilation on precipitation estimates.</p><p>The results show that the numerical experiments exhibit, in general, a suitable simulation of precipitable water at different stages of the cyclone. In particular, the bulk of the rainfall volume exhibits three stages: intensive rain on the cyclone's frontal zone, weaker precipitation immediately behind the front, and the secondary enhancement of rainfall. The largest corrections due to RDA are of up to 5 mm and occur during the approach of the cyclone frontal zone in a form of enhanced rainfall over the whole area, but more prominently in weak precipitation locations.</p>

scholarly journals Prediction of Convective Storms at Convection-Resolving 1 km Resolution over Continental United States with Radar Data Assimilation: An Example Case of 26 May 2008 and Precipitation Forecasts from Spring 2009

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Ming Xue ◽  
Fanyou Kong ◽  
Kevin W. Thomas ◽  
Jidong Gao ◽  
Yunheng Wang ◽  
...  
Keyword(s):  
United States ◽  
Data Assimilation ◽  
Positive Impact ◽  
Weather Prediction ◽  
Radar Data ◽  
Severe Weather ◽  
Ensemble Forecasts ◽  
University Of Oklahoma ◽  
Reflectivity Data ◽  
Radar Data Assimilation

For the first time ever, convection-resolving forecasts at 1 km grid spacing were produced in realtime in spring 2009 by the Center for Analysis and Prediction of Storms (CAPS) at the University of Oklahoma. The forecasts assimilated both radial velocity and reflectivity data from all operational WSR-88D radars within a domain covering most of the continental United States. In preparation for the realtime forecasts, 1 km forecast tests were carried out using a case from spring 2008 and the forecasts with and without assimilating radar data are compared with corresponding 4 km forecasts produced in realtime. Significant positive impact of radar data assimilation is found to last at least 24 hours. The 1 km grid produced a more accurate forecast of organized convection, especially in structure and intensity details. It successfully predicted an isolated severe-weather-producing storm nearly 24 hours into the forecast, which all ten members of the 4 km real time ensemble forecasts failed to predict. This case, together with all available forecasts from 2009 CAPS realtime forecasts, provides evidence of the value of both convection-resolving 1 km grid and radar data assimilation for severe weather prediction for up to 24 hours.

scholarly journals X-Net-Based Radar Data Assimilation Study over the Seoul Metropolitan Area

2020 ◽  
Vol 12 (5) ◽  
pp. 893 ◽  
Author(s):  
Ji-Won Lee ◽  
Ki-Hong Min ◽  
Young-Hee Lee ◽  
GyuWon Lee
Keyword(s):  
Data Assimilation ◽  
Radial Velocity ◽  
Metropolitan Area ◽  
Numerical Data ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Model Verification ◽  
Seoul Metropolitan Area ◽  
X Band ◽  
Reflectivity Data

This study investigates the ability of the high-resolution Weather Research and Forecasting (WRF) model to simulate summer precipitation with assimilation of X-band radar network data (X-Net) over the Seoul metropolitan area. Numerical data assimilation (DA) experiments with X-Net (S- and X-band Doppler radar) radial velocity and reflectivity data for three events of convective systems along the Changma front are conducted. In addition to the conventional assimilation of radar data, which focuses on assimilating the radial velocity and reflectivity of precipitation echoes, this study assimilates null-echoes and analyzes the effect of null-echo data assimilation on short-term quantitative precipitation forecasting (QPF). A null-echo is defined as a region with non-precipitation echoes within the radar observation range. The model removes excessive humidity and four types of hydrometeors (wet and dry snow, graupel, and rain) based on the radar reflectivity by using a three-dimensional variational (3D-Var) data assimilation technique within the WRFDA system. Some procedures for preprocessing radar reflectivity data and using null-echoes in this assimilation are discussed. Numerical experiments with conventional radar DA over-predicted the precipitation. However, experiments with additional null-echo information removed excessive water vapor and hydrometeors and suppressed erroneous model precipitation. The results of statistical model verification showed improvements in the analysis and objective forecast scores, reducing the amount of over-predicted precipitation. An analysis of a contoured frequency by altitude diagram (CFAD) and time–height cross-sections showed that increased hydrometeors throughout the data assimilation period enhanced precipitation formation, and reflectivity under the melting layer was simulated similarly to the observations during the peak precipitation times. In addition, overestimated hydrometeors were reduced through null-echo data assimilation.

scholarly journals Assimilation of ZDR Columns for Improving the Spinup and Forecast of Convective Storms in Storm-Scale Models: Proof-of-Concept Experiments

2017 ◽  
Vol 145 (12) ◽  
pp. 5033-5057 ◽  
Author(s):  
Jacob T. Carlin ◽  
Jidong Gao ◽  
Jeffrey C. Snyder ◽  
Alexander V. Ryzhkov
Keyword(s):  
Latent Heat ◽  
Weather Prediction ◽  
Radar Data ◽  
Radar Reflectivity ◽  
Moist Convection ◽  
Regional Prediction ◽  
Scale Models ◽  
Deep Moist Convection ◽  
Reflectivity Data ◽  
Cloud Analysis

Achieving accurate storm-scale analyses and reducing the spinup time of modeled convection is a primary motivation for the assimilation of radar reflectivity data. One common technique of reflectivity data assimilation is using a cloud analysis, which inserts temperature and moisture increments and hydrometeors deduced from radar reflectivity via empirical relations to induce and sustain updraft circulations. Polarimetric radar data have the ability to provide enhanced insight into the microphysical and dynamic structure of convection. Thus far, however, relatively little has been done to leverage these data for numerical weather prediction. In this study, the Advanced Regional Prediction System’s cloud analysis is modified from its original reflectivity-based formulation to provide moisture and latent heat adjustments based on the detection of differential reflectivity columns, which can serve as proxies for updrafts in deep moist convection and, subsequently, areas of saturation and latent heat release. Cycled model runs using both the original cloud analysis and above modifications are performed for two high-impact weather cases: the 19 May 2013 central Oklahoma tornadic supercells and the 25 May 2016 north-central Kansas tornadic supercell. The analyses and forecasts of convection qualitatively and quantitatively improve in both cases, including more coherent analyzed updrafts, more realistic forecast reflectivity structures, a better correspondence between forecast updraft helicity tracks and radar-derived rotation tracks, and improved frequency biases and equitable threat scores for reflectivity. Based on these encouraging results, further exploration of the assimilation of dual-polarization radar data into storm-scale models is warranted.

Optimizing the localization scale for a convective-scale ensemble radar data assimilation 

2021 ◽  
Author(s):  
James Taylor ◽  
Takumi Honda ◽  
Arata Amemiya ◽  
Takemasa Miyoshi
Keyword(s):  
Data Assimilation ◽  
Weather Prediction ◽  
Radar Data ◽  
Physical Distance ◽  
Numerical Weather Prediction Model ◽  
Sampling Errors ◽  
Tokyo Metropolitan Area ◽  
Sensitivity Tests ◽  
Ensemble Transform Kalman Filter ◽  
The Impact

<p>For any ensemble-based data assimilation system sampling errors are introduced as a consequence of limited ensemble size, generating spurious backgound error covariances and leading to erroneous adjustments to the analysis. As a way to reduce the impact of these sampling errors, as well as improve rank deficiency, covariance localization is applied, which artifically reduces the weighting of error covariances beyond a defined physical distance between the background and observations deemed to be false.</p><p>In this study we perform sensitivity tests to find the appropriate horizontal localization scale for the SCALE-LETKF, a numerical weather prediction model that combines the SCALE regional model with the local ensemble transform Kalman filter. The system has been in development since 2013 to provide very high resolution modelling of convective weather systems and is unique in its ability to perform near real-time NWP operation at 500-m resolution refreshed every 30 seconds with observations from Phased Array Weather Radar (PAWR).  Here, we perform sensitivity tests at 500-m resolution with 30-second update cycling of PAWR data for several testcases of heavy convective rainfall over Tokyo metropolitan area from August/September 2019. Test scores showed horizontal localization scale of 2-km generally provided optimal forecast skill for lead times up to 30 minutes, although there were variations on this dependent upon lead time and case study. We show that by reducing localization scale, systematic errors leading to over-intensification of convective activity in forecasts were reduced, resulting in improved consistency with observations. This was a conseqence of generating more convectively stable, less dynamically active environment with smaller localization scale.</p>

Sign in / Sign up

Export Citation Format

Share Document