scholarly journals Development of Advanced Biodevices Using Quantum Beam Microfabrication Technology

2020 ◽  
Vol 4 (1) ◽  
pp. 14 ◽  
Author(s):  
Tomoko G. Oyama ◽  
Atsushi Kimura ◽  
Naotsugu Nagasawa ◽  
Kotaro Oyama ◽  
Mitsumasa Taguchi
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Stem Cell Differentiation ◽  
Cell Aggregation ◽  
Three Dimensions ◽  
Gene Expression Control ◽  
Potential Applications ◽  
Microfabrication Technology

Biodevices with engineered micro- and nanostructures are strongly needed for advancements in medical technology such as regenerative medicine, drug discovery, diagnostic reagents, and drug delivery to secure high quality of life. The authors produced functional biocompatible plastics and hydrogels with physical and chemical properties and surface microscopic shapes that can be freely controlled in three dimensions during the production process using the superior properties of quantum beams. Nanostructures on a biocompatible poly(L-lactic acid) surface were fabricated using a focused ion beam. Soft hydrogels based on polysaccharides were micro-fabricated using a focused proton beam. Gelatin hydrogels were fabricated using γ-rays and electron beam, and their microstructures and stiffnesses were controlled for biological applications. HeLa cells proliferated three-dimensionally on the radiation-crosslinked gelatin hydrogels and, furthermore, their shapes can be controlled by the micro-fabricated surface of the hydrogel. Long-lasting hydrophilic concave structures were fabricated on the surface of silicone by radiation-induced crosslinking and oxidation. The demonstrated advanced biodevices have potential applications in three-dimensional cell culture, gene expression control, stem cell differentiation induction/suppression, cell aggregation into arbitrary shapes, tissue culture, and individual diagnosis in the medical field.

scholarly journals FIB-SEM Three-Dimensional Tomography for Characterization of Carbon-Based Materials

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Nan Nan ◽  
Jingxin Wang
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
3D Tomography ◽  
Tomography System ◽  
Internal Structures ◽  
Potential Applications ◽  
Scanning Electron ◽  
Carbon Based

A review on the recent advances of the three-dimensional (3D) characterization of carbon-based materials was conducted by focused ion beam-scanning electron microscope (FIB-SEM) tomography. Current studies and further potential applications of the FIB-SEM 3D tomography technique for carbon-based materials were discussed. The goal of this paper is to highlight the advances of FIB-SEM 3D reconstruction to reveal the high and accurate resolution of internal structures of carbon-based materials and provide suggestions for the adoption and improvement of the FIB-SEM tomography system for a broad carbon-based research to achieve the best examination performances and enhance the development of innovative carbon-based materials.

3D Tomographic EBSD Measurements of Heavily Deformed Ultra Fine Grained Cu-0.17wt%Zr Obtained from ECAP

2008 ◽  
Vol 584-586 ◽  
pp. 434-439 ◽  
Author(s):  
Anahita Khorashadizadeh ◽  
Myrjam Winning ◽  
Dierk Raabe
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Polycrystalline Materials ◽  
Fine Grained ◽  
Orientation Microscopy ◽  
Angular Pressing ◽  
Dual Beam ◽  
Fine Grained Structure

Obtaining knowledge on the grain boundary topology in three dimensions is of great importance as it controls the mechanical properties of polycrystalline materials. In this study, the three dimensional texture and grain topology of as-deformed ultra fine grained Cu-0.17wt%Zr have been investigated using three-dimensional orientation microscopy (3D electron backscattering diffraction, EBSD) measurements in ultra fine grained Cu-0.17wt%Zr. Equal channel angular pressing was used to produce the ultra fine grained structure. The experiments were conducted using a dual-beam system for 3D-EBSD. The approach is realized by a combination of a focused ion beam (FIB) unit for serial sectioning with high-resolution field emission scanning electron microscopy equipped with EBSD. The work demonstrates that the new 3D EBSD-FIB technique provides a new level of microstructure information that cannot be achieved by conventional 2D-EBSD analysis.

scholarly journals Three-dimensional Structural Interrelations between Cells, Extracellular Matrix and Mineral in Vertebrate Mineralization

2019 ◽  
Author(s):  
Zhaoyong Zou ◽  
Tengteng Tang ◽  
Elena Macías-Sánchez ◽  
Sanja Sviben ◽  
William J. Landis ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Cellular Network ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Basic Mechanism ◽  
Three Dimensions ◽  
Mineral Deposits ◽  
Comprehensive Overview ◽  
Small Channels

AbstractThe spatial-temporal relationship between cells, extracellular matrices and mineral deposits is fundamental for an improved understanding mineralization mechanisms in vertebrate tissues. By utilizing focused ion beam-scanning electron microscopy with serial surface imaging, normally mineralizing avian tendons have been studied with nanometer resolution in three dimensions with volumes exceeding tens of microns in range. These parameters are necessary to yield fine ultrastructural details while encompassing tissue domains sufficient to provide a comprehensive overview of the interrelationships between the tissue structural constituents. Investigation reveals a novel complex cellular network in highly mineralized tendon aspects, where ∼100 nm diameter canaliculi emanating from cell (tenocyte) lacunae surround extracellular collagen fibril bundles. Canaliculi are linked to smaller channels of ∼40 nm diameter, occupying spaces between fibrils. Close to the tendon mineralization front, calcium-rich globules appear between the fibrils and, with time, mineral propagates along and within collagen. These close associations between tenocytes, canaliculi, small channels, collagen and mineral suggest a new concept for the mineralization process, where ions and/or mineral precursors may be transported through spaces between fibrils before they crystallize along the surface of and within the fibrils.Significance StatementThe basic mechanism by which vertebrate collagenous tissues are mineralized is still not fully elucidated, despite the importance of this process for skeletal formation and regeneration. Through three-dimensional imaging of the cellular network together with the extracellular matrix and mineral deposits, the present work investigates normally mineralizing avian leg tendon as a model system for vertebrates in general. The data support a mechanism where mineral ions and possible mineral precursors are initially present in interfibrillar collagen spaces and are subsequently translocated to neighboring collagen fibrils. Mineral particles then nucleate in association with collagen to form the well known collagen-mineral composite material of the skeleton.

scholarly journals Three-dimensional structural interrelations between cells, extracellular matrix, and mineral in normally mineralizing avian leg tendon

2020 ◽  
Vol 117 (25) ◽  
pp. 14102-14109 ◽  
Author(s):  
Zhaoyong Zou ◽  
Tengteng Tang ◽  
Elena Macías-Sánchez ◽  
Sanja Sviben ◽  
William J. Landis ◽  
...  
Keyword(s):  
Temporal Relationship ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Mineral Deposits ◽  
Surface Imaging ◽  
Mineralization Process ◽  
Comprehensive Overview ◽  
Small Channels

The spatial-temporal relationship between cells, extracellular matrices, and mineral deposits is fundamental for an improved understanding of mineralization mechanisms in vertebrate tissues. By utilizing focused ion beam-scanning electron microscopy with serial surface imaging, normally mineralizing avian tendons have been studied with nanometer resolution in three dimensions with volumes exceeding tens of micrometers in range. These parameters are necessary to yield sufficiently fine ultrastructural details while providing a comprehensive overview of the interrelationships between the tissue structural constituents. Investigation reveals a complex lacuno-canalicular network in highly mineralized tendon regions, where ∼100 nm diameter canaliculi emanating from cell (tenocyte) lacunae surround extracellular collagen fibril bundles. Canaliculi are linked to smaller channels of ∼40 nm diameter, occupying spaces between fibrils. Close to the tendon mineralization front, calcium-rich deposits appear between the fibrils and, with time, mineral propagates along and within them. These close associations between tenocytes, tenocyte lacunae, canaliculi, small channels, collagen, and mineral suggest a concept for the mineralization process, where ions and/or mineral precursors may be transported through spaces between fibrils before they crystallize along the surface of and within the fibrils.

scholarly journals Fundamentals of Focused Ion Beam Nanostructural Processing: Below, At, and Above the Surface

MRS Bulletin ◽  
2007 ◽  
Vol 32 (5) ◽  
pp. 424-432 ◽  
Author(s):  
Warren J. MoberlyChan ◽  
David P. Adams ◽  
Michael J. Aziz ◽  
Gerhard Hobler ◽  
Thomas Schenkel
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Chemical Vapor ◽  
Three Dimensions ◽  
Injection System ◽  
Nanometer Scale ◽  
Flat Surfaces ◽  
Transmission Electron ◽  
High Doses

AbstractThis article considers the fundamentals of what happens in a solid when it is impacted by a medium-energy gallium ion. The study of the ion/sample interaction at the nanometer scale is applicable to most focused ion beam (FIB)–based work even if the FIB/sample interaction is only a step in the process, for example, micromachining or microelectronics device processing. Whereas the objective in other articles in this issue is to use the FIB tool to characterize a material or to machine a device or transmission electron microscopy sample, the goal of the FIB in this article is to have the FIB/sample interaction itself become the product. To that end, the FIB/sample interaction is considered in three categories according to geometry: below, at, and above the surface. First, the FIB ions can penetrate the top atom layer(s) and interact below the surface. Ion implantation and ion damage on flat surfaces have been comprehensively examined; however, FIB applications require the further investigation of high doses in three-dimensional profiles. Second, the ions can interact at the surface, where a morphological instability can lead to ripples and surface self-organization, which can depend on boundary conditions for site-specific and compound FIB processing. Third, the FIB may interact above the surface (and/or produce secondary particles that interact above the surface). Such ion beam–assisted deposition, FIB–CVD (chemical vapor deposition), offers an elaborate complexity in three dimensions with an FIB using a gas injection system. At the nanometer scale, these three regimes—below, at, and above the surface—can require an interdependent understanding to be judiciously controlled by the FIB.

Design and Modeling of an Active Five-Axis Compliant Micromanipulator

2014 ◽  
Vol 6 (4) ◽  
Author(s):  
G. R. Jayanth ◽  
C. H. Menq
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Contact Point ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Precise Control ◽  
Actuation System ◽  
Lumped Parameter ◽  
Tip Position ◽  
Five Axis

This paper presents the design and modeling of an active five-axis compliant micromanipulator whose tip orientation can be independently controlled by large angles about two axes and the tip-position can be controlled in three dimensions. These features enable precise control of the contact point of the tip and the tip–sample interaction forces with three-dimensional nanoscale objects, including those features that are conventionally inaccessible. Control of the tip-motion is realized by means of electromagnetic actuation combined with a novel kinematic and structural design of the micromanipulator, which, in addition, also ensures compatibility with existing high-resolution motion-measurement systems. The design and analysis of the manipulator structure and those of the actuation system are first presented. Quasi-static and dynamic lumped-parameter (LP) models are then derived for the five-axis compliant micromanipulator. Finite element (FE) analysis is employed to validate these models, which are subsequently used to study the effects of tip orientation on the mechanical characteristics of the five-axis micromanipulator. Finally, a prototype of the designed five-axis manipulator is fabricated by means of focused ion-beam milling (FIB).

3D Observation of Elemental Distribution of Si-Device using a Dedicated FIB/STEM System

2005 ◽  
Author(s):  
T. Yaguchi ◽  
M. Konno ◽  
T. Kamino ◽  
M. Ogasawara ◽  
K. Kaji ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Elemental Distribution ◽  
Multivariate Statistical ◽  
X Ray ◽  
Sample Rotation ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Elemental Maps

Abstract A technique for preparation of a pillar shaped sample and its multi-directional observation of the sample using a focused ion beam (FIB) / scanning transmission electron microscopy (STEM) system has been developed. The system employs an FIB/STEM compatible sample rotation holder with a specially designed rotation mechanism, which allows the sample to be rotated 360 degrees [1-3]. This technique was used for the three dimensional (3D) elemental mapping of a contact plug of a Si device in 90 nm technology. A specimen containing a contact plug was shaped to a pillar sample with a cross section of 200 nm x 200 nm and a 5 um length. Elemental analysis was performed with a 200 kV HD-2300 STEM equipped with the EDAX genesis Energy dispersive X-ray spectroscopy (EDX) system. Spectrum imaging combined with multivariate statistical analysis (MSA) [4, 5] was used to enhance the weak X-ray signals of the doped area, which contain a low concentration of As-K. The distributions of elements, especially the dopant As, were successfully enhanced by MSA. The elemental maps were .. reconstructed from the maps.

scholarly journals Investigation of the selective color-changing mechanism of Dynastes tityus beetle (Coleoptera: Scarabaeidae)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiyu Sun ◽  
Wei Wu ◽  
Limei Tian ◽  
Wei Li ◽  
Fang Zhang ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Color Change ◽  
Incidence Angle ◽  
Ion Beam ◽  
Three Dimensional ◽  
Water Infiltration ◽  
Photonic Materials ◽  
Local Color ◽  
Water Contact ◽  
Color Changes

AbstractNot only does the Dynastes tityus beetle display a reversible color change controlled by differences in humidity, but also, the elytron scale can change color from yellow-green to deep-brown in specified shapes. The results obtained by focused ion beam-scanning electron microscopy (FIB-SEM), show that the epicuticle (EPI) is a permeable layer, and the exocuticle (EXO) is a three-dimensional photonic crystal. To investigate the mechanism of the reversible color change, experiments were conducted to determine the water contact angle, surface chemical composition, and optical reflectance, and the reflective spectrum was simulated. The water on the surface began to permeate into the elytron via the surface elemental composition and channels in the EPI. A structural unit (SU) in the EXO allows local color changes in varied shapes. The reflectance of both yellow-green and deep-brown elytra increases as the incidence angle increases from 0° to 60°. The microstructure and changes in the refractive index are the main factors that influence the process of reversible color change. According to the simulation, the lower reflectance causing the color change to deep-brown results from water infiltration, which increases light absorption. Meanwhile, the waxy layer has no effect on the reflection of light. This study lays the foundation to manufacture engineered photonic materials that undergo controllable changes in iridescent color.

scholarly journals Protocol for preparation of heterogeneous biological samples for 3D electron microscopy: a case study for insects

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alexey A. Polilov ◽  
Anastasia A. Makarova ◽  
Song Pang ◽  
C. Shan Xu ◽  
Harald Hess
Keyword(s):  
Electron Microscopy ◽  
Biological Samples ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Entire Volume ◽  
Simple Protocol ◽  
3D Electron Microscopy ◽  
3D Em

AbstractModern morphological and structural studies are coming to a new level by incorporating the latest methods of three-dimensional electron microscopy (3D-EM). One of the key problems for the wide usage of these methods is posed by difficulties with sample preparation, since the methods work poorly with heterogeneous (consisting of tissues different in structure and in chemical composition) samples and require expensive equipment and usually much time. We have developed a simple protocol allows preparing heterogeneous biological samples suitable for 3D-EM in a laboratory that has a standard supply of equipment and reagents for electron microscopy. This protocol, combined with focused ion-beam scanning electron microscopy, makes it possible to study 3D ultrastructure of complex biological samples, e.g., whole insect heads, over their entire volume at the cellular and subcellular levels. The protocol provides new opportunities for many areas of study, including connectomics.

Sign in / Sign up

Export Citation Format

Share Document