scholarly journals Development of a Compact, Low-Frequency Vibration, Piezoelectric MEMS Energy Harvester

Proceedings ◽  
2017 ◽  
Vol 1 (4) ◽  
pp. 588 ◽  
Author(s):  
Florenta Costache ◽  
Boscij Pawlik ◽  
Andreas Rieck
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Low Frequency Vibration ◽  
Piezoelectric Mems

Design of piezoelectric MEMS cantilever for low-frequency vibration energy harvester

2016 ◽  
Vol 55 (6S1) ◽  
pp. 06GP14 ◽  
Author(s):  
Ryohei Takei ◽  
Natsumi Makimoto ◽  
Hironao Okada ◽  
Toshihiro Itoh ◽  
Takeshi Kobayashi
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Low Frequency Vibration ◽  
Piezoelectric Mems

Design Optimization of Low Power and Low Frequency Vibration Based MEMS Energy Harvester

2013 ◽  
Vol 475-476 ◽  
pp. 1624-1628
Author(s):  
Hasnizah Aris ◽  
David Fitrio ◽  
Jack Singh
Keyword(s):  
Low Power ◽  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Geometry Optimization ◽  
Low Frequency ◽  
Substrate Thickness ◽  
Power Harvesting ◽  
Low Frequency Vibration ◽  
Length Width ◽  
Development And Utilization

The development and utilization of different structural materials, optimization of the cantilever geometry and power harvesting circuit are the most commonly methods used to increase the power density of MEMS energy harvester. This paper discusses the cantilever geometry optimization process of low power and low frequency of bimorph MEMS energy harvester. Three piezoelectric materials, ZnO, AlN and PZT are deposited on top and bottom of the cantilever Si substrate. This study focuses on the optimization of the cantilevers length, width, substrate thickness and PZe thickness in order to achieve lower than 600 Hz of resonant frequency. The harvested power for this work is in the range of 0.02 ~ 194.49 nW.

Development of a tunable low-frequency vibration energy harvester and its application to a self-contained wireless fatigue crack detection sensor

2018 ◽  
Vol 18 (3) ◽  
pp. 920-933 ◽  
Author(s):  
Suyoung Yang ◽  
Sung-Youb Jung ◽  
Kiyoung Kim ◽  
Peipei Liu ◽  
Sangmin Lee ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Energy Harvesting ◽  
Crack Detection ◽  
Energy Harvester ◽  
Low Frequency ◽  
Vibration Energy ◽  
Low Frequency Vibration ◽  
Resonance Frequencies ◽  
Energy Harvesting System ◽  
Fatigue Crack Detection

In this study, a tunable electromagnetic energy harvesting system, consisting of an energy harvester and energy harvesting circuits, is developed for harnessing energy from low-frequency vibration (below 10 Hz) of a bridge, and the harvesting system is integrated with a wireless fatigue crack detection sensor. The uniqueness of the proposed energy harvesting system includes that (1) the resonance frequencies of the proposed energy harvester can be readily tuned to the resonance frequencies of a host structure, (2) an improved energy harvesting efficiency compared to other electromagnetic energy harvesters is achieved in low-frequency and vibration, and (3) high-efficiency energy harvesting circuits for rectification are developed. Furthermore, the developed energy harvesting system is integrated with an on-site wireless sensor deployed on Yeongjong Grand Bridge in South Korea for online fatigue crack detection. To the best knowledge of the authors, this is the very first study where a series of low-frequency vibration energy harvesting, rectification, and battery charging processes are demonstrated under a real field condition. The field test conducted on Yeongjong Grand Bridge, where fatigue cracks have become of a great concern, shows that the proposed energy harvester can generate a peak voltage of 2.27 V and a root mean square voltage of 0.21 V from 0.18-m/s2 root mean square acceleration at 3.05 Hz. It is estimated the proposed energy harvesting system can harness around 67.90 J for 3 weeks and an average power of 37.42 µW. The battery life of the wireless sensor is expected to extend from 1.5 to 2.2 years. The proposed energy harvesting circuits, composed of the AC–DC and boost-up converters, exhibit up to 50% battery charging efficiency when the voltage generated by the proposed energy harvester is 200 mV or higher. The proposed boost-up converter has a 100 times wider input power range than a conventional boost-up converter with a similar efficiency.

Sign in / Sign up

Export Citation Format

Share Document