scholarly journals Design Guideline for Hydropower Plants Using One or Multiple Archimedes Screws

Processes ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 2128
Author(s):  
Arash YoosefDoost ◽  
William David Lubitz
Keyword(s):  
Power Plants ◽  
River Flow ◽  
Flow Characteristics ◽  
Simple Method ◽  
Design Guideline ◽  
Hydropower Plants ◽  
Important Concern ◽  
Wide Range ◽  
Standard Designs ◽  
Maintenance Requirements

The Archimedes/Archimedean screw generator (ASG) is a fish-friendly hydropower technology that could operate under a wide range of flow heads and flow rates and generate power from almost any flow, even wastewater. The simplicity and low maintenance requirements and costs make ASGs suitable even for remote or developing areas. However, there are no general and easy-to-use guidelines for designing Archimedes screw power plants. Therefore, this study addresses this important concern by offering a simple method for quick rough estimations of the number and geometry of Archimedes screws in considering the installation site properties, river flow characteristics, and technical considerations. Moreover, it updates the newest analytical method of designing ASGs by introducing an easier graphical approach that not only covers standard designs but also simplifies custom designs. Besides, a list of currently installed and operating industrial multi-Archimedes screw hydropower plants are provided to review and explore the common design properties between different manufacturers. On top of that, this study helps to improve one of the biggest burdens of small projects, the unscalable initial investigation costs, by enabling everyone to evaluate the possibilities of a green and renewable Archimedes screw hydropower generation where a flow is available.

scholarly journals Development of a simulation model of HPPs chain operation

2020 ◽  
Vol 191 ◽  
pp. 02004
Author(s):  
Alexandra Khalyasmaa ◽  
Stanislav Eroshenko ◽  
Sergey Mitrofanov ◽  
Anastasia Rusina ◽  
Anna Arestova ◽  
...  
Keyword(s):  
Power Systems ◽  
Simulation Model ◽  
Power Plants ◽  
River Flow ◽  
Water Pressure ◽  
Operation Mode ◽  
Flow Characteristics ◽  
Time Lags ◽  
Hydroelectric Power ◽  
Hydro Power

The paper presents a simulation model of a hydroelectric power plants chain. The model allows solving the problem of hydro power plants (HPPs) operation mode planning in a unified power system, taking into account the optimization of water resources. The optimal filling and decrease of storage was performed in MATLAB Simulink software. The hydraulic properties of the river flow between the stations and the corresponding time lags in the functioning of the down-river station are taken into account. The model allows continuously monitoring changes in water pressure at hydropower plants and, as a result, uses the family of flow characteristics for various water pressures. The issues of optimizing the participation of hydroelectric power stations in the regimes of large hydrothermal power systems were also raised.

scholarly journals Run-of-the-River Hydro-PV Battery Hybrid System as an Energy Supplier for Local Loads

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5160
Author(s):  
Dariusz Borkowski ◽  
Dariusz Cholewa ◽  
Anna Korzeń
Keyword(s):  
Hybrid System ◽  
Power Plants ◽  
River Flow ◽  
Hydropower Plant ◽  
Construction Time ◽  
Hydro Power ◽  
Local Loads ◽  
Energy Deficiency ◽  
Hydropower Plants ◽  
Hydro Power Plants

Hybrid hydro energy systems are usually analysed with pumped hydro storage systems, which can facilitate energy accumulation from other sources. Despite the lack of water storage, run-of-the-river hydropower plants are also attractive for hybrid systems owing to their low investment cost, short construction time, and small environmental impact. In this study, a hybrid system that contains run-of-the-river small hydro power plants (SHPs), PV systems, and batteries to serve local loads is examined. Low-power and low-head schemes that use variable-speed operation are considered. The novelty of this study is the proposal of a dedicated steady-state model of the run-of-the-river hydropower plant that is suitable for energy production analysis under different hydrological conditions. The presented calculations based on a real SHP of 150 kW capacity have shown that a simplified method can result in a 43% overestimation of the produced energy. Moreover, a one-year analysis of a hybrid system operation using real river flow data showed that the flow averaging period has a significant influence on the energy balance results. The system energy deficiency and surplus can be underestimated by approximately 25% by increasing the averaging time from day to month.

Improving Energy Efficiency in Internet of Things using Artificial Bee Colony Algorithm

2020 ◽  
Vol 14 ◽  
Author(s):  
M. Sivaram ◽  
V. Porkodi ◽  
Amin Salih Mohammed ◽  
S. Anbu Karuppusamy
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Artificial Bee Colony ◽  
Trust Model ◽  
Sensor Nodes ◽  
Remote Areas ◽  
Bee Colony ◽  
Important Concern ◽  
Wide Range ◽  
Iot Devices

Background: With the advent of IoT, the deployment of batteries with a limited lifetime in remote areas is a major concern. In certain conditions, the network lifetime gets restricted due to limited battery constraints. Subsequently, the collaborative approaches for key facilities help to reduce the constraint demands of the current security protocols. Aim: This work covers and combines a wide range of concepts linked by IoT based on security and energy efficiency. Specifically, this study examines the WSN energy efficiency problem in IoT and security for the management of threats in IoT through collaborative approaches and finally outlines the future. The concept of energy-efficient key protocols which clearly cover heterogeneous IoT communications among peers with different resources has been developed. Because of the low capacity of sensor nodes, energy efficiency in WSNs has been an important concern. Methods: Hence, in this paper, we present an algorithm for Artificial Bee Colony (ABC) which reviews security and energy consumption to discuss their constraints in the IoT scenarios. Results: The results of a detailed experimental assessment are analyzed in terms of communication cost, energy consumption and security, which prove the relevance of a proposed ABC approach and a key establishment. Conclusion: The validation of DTLS-ABC consists of designing an inter-node cooperation trust model for the creation of a trusted community of elements that are mutually supportive. Initial attempts to design the key methods for management are appropriate individual IoT devices. This gives the system designers, an option that considers the question of scalability.

scholarly journals MOSAIK and FMI-Based Co-Simulation Applied to Transient Stability Analysis of Grid-Forming Converter Modulated Wind Power Plants

2021 ◽  
Vol 11 (5) ◽  
pp. 2410
Author(s):  
Nakisa Farrokhseresht ◽  
Arjen A. van der Meer ◽  
José Rueda Torres ◽  
Mart A. M. M. van der Meijden
Keyword(s):  
Power System ◽  
Time Domain ◽  
Power Plants ◽  
Transient Stability ◽  
Renewable Energy Sources ◽  
Critical Factor ◽  
Primary Control ◽  
Simulation Approach ◽  
Wide Range ◽  
Grid Side

The grid integration of renewable energy sources interfaced through power electronic converters is undergoing a significant acceleration to meet environmental and political targets. The rapid deployment of converters brings new challenges in ensuring robustness, transient stability, among others. In order to enhance transient stability, transmission system operators established network grid code requirements for converter-based generators to support the primary control task during faults. A critical factor in terms of implementing grid codes is the control strategy of the grid-side converters. Grid-forming converters are a promising solution which could perform properly in a weak-grid condition as well as in an islanded operation. In order to ensure grid code compliance, a wide range of transient stability studies is required. Time-domain simulations are common practice for that purpose. However, performing traditional monolithic time domain simulations (single solver, single domain) on a converter-dominated power system is a very complex and computationally intensive task. In this paper, a co-simulation approach using the mosaik framework is applied on a power system with grid-forming converters. A validation workflow is proposed to verify the co-simulation framework. The results of comprehensive simulation studies show a proof of concept for the applicability of this co-simulation approach to evaluate the transient stability of a dominant grid-forming converter-based power system.

scholarly journals Development of a Hydropower Turbine Using Seawater from a Fish Farm

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 266
Author(s):  
Md Rakibuzzaman ◽  
Sang-Ho Suh ◽  
Hyoung-Ho Kim ◽  
Youngtae Ryu ◽  
Kyung Yup Kim
Keyword(s):  
Power Plants ◽  
Guide Vane ◽  
Cross Flow ◽  
Synchronous Generator ◽  
Fish Farm ◽  
Hydropower Plant ◽  
Fish Farms ◽  
Data Simulation ◽  
Small Hydropower ◽  
Hydropower Plants

Discharge water from fish farms is a clean, renewable, and abundant energy source that has been used to obtain renewable energy via small hydropower plants. Small hydropower plants may be installed at offshore fish farms where suitable water is obtained throughout the year. It is necessary to meet the challenges of developing small hydropower systems, including sustainability and turbine efficiency. The main objective of this study was to investigate the possibility of constructing a small hydropower plant and develop 100 kW class propeller-type turbines in a fish farm with a permanent magnet synchronous generator (PMSG). The turbine was optimized using a computer simulation, and an experiment was conducted to obtain performance data. Simulation results were then validated with experimental results. Results revealed that streamlining the designed shape of the guide vane reduced the flow separation and improved the efficiency of the turbine. Optimizing the shape of the runner vane decreased the flow rate, reducing the water power and increasing the efficiency by about 5.57%. Also, results revealed that tubular or cross-flow turbines could be suitable for use in fish farm power plants, and the generator used should be waterproofed to avoid exposure to seawater.

scholarly journals Preparation of Synthetic Zeolites from Coal Fly Ash by Hydrothermal Synthesis

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1267
Author(s):  
David Längauer ◽  
Vladimír Čablík ◽  
Slavomír Hredzák ◽  
Anton Zubrik ◽  
Marek Matik ◽  
...  
Keyword(s):  
Fly Ash ◽  
Coal Combustion ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Thermal Power ◽  
Product Analysis ◽  
Coal Combustion Products ◽  
X Ray ◽  
Wide Range ◽  
Silica Alumina

Large amounts of coal combustion products (as solid products of thermal power plants) with different chemical and physical properties cause serious environmental problems. Even though coal fly ash is a coal combustion product, it has a wide range of applications (e.g., in construction, metallurgy, chemical production, reclamation etc.). One of its potential uses is in zeolitization to obtain a higher added value of the product. The aim of this paper is to produce a material with sufficient textural properties used, for example, for environmental purposes (an adsorbent) and/or storage material. In practice, the coal fly ash (No. 1 and No. 2) from Czech power plants was firstly characterized in detail (X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX), particle size measurement, and textural analysis), and then it was hydrothermally treated to synthetize zeolites. Different concentrations of NaOH, LiCl, Al2O3, and aqueous glass; different temperature effects (90–120 °C); and different process lengths (6–48 h) were studied. Furthermore, most of the experiments were supplemented with a crystallization phase that was run for 16 h at 50 °C. After qualitative product analysis (SEM-EDX, XRD, and textural analytics), quantitative XRD evaluation with an internal standard was used for zeolitization process evaluation. Sodalite (SOD), phillipsite (PHI), chabazite (CHA), faujasite-Na (FAU-Na), and faujasite-Ca (FAU-Ca) were obtained as the zeolite phases. The content of these zeolite phases ranged from 2.09 to 43.79%. The best conditions for the zeolite phase formation were as follows: 4 M NaOH, 4 mL 10% LiCl, liquid/solid ratio of 30:1, silica/alumina ratio change from 2:1 to 1:1, temperature of 120 °C, process time of 24 h, and a crystallization phase for 16 h at 50 °C.

scholarly journals Transformation of the Flow Regime of a Large Allochthonous River in Central Europe—An Example of the Vistula River in Poland

Water ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 507 ◽  
Author(s):  
Dariusz Wrzesiński ◽  
Leszek Sobkowiak
Keyword(s):  
Flow Regime ◽  
Annual Cycle ◽  
River Flow ◽  
Hydrological Cycle ◽  
Temporal Structure ◽  
Flow Characteristics ◽  
Point Of View ◽  
Theoretical Point ◽  
Vistula River ◽  
Basin Water

Identification of river flow regime and its possible changes caused by natural factors or human activity is one of major issues in modern hydrology. In such studies different approaches and different indicators can be used. The aim of this study is to determine changes in flow regime of the largest river in Poland—the Vistula, using new, more objectified coefficients and indices, based on data recorded in 22 gauges on the Vistula mainstream and 38 gauges on its tributaries in the multi-year period 1971–2010. The paper consists of three main parts: in the first part, in order to recognize changes in the flow regime characteristics along the Vistula, data from gauges located on the river mainstream were analyzed with the help of the theory of entropy. In the second part gauging stations on the Vistula mainstream and its tributaries were grouped; values of the newly introduced pentadic Pardé’s coefficient of flow (discharge) (PPC) were taken as the grouping criterion. In the third part of the study a novel method of determining river regime characteristics was applied: through the recognition of the temporal structure of hydrological phenomena and their changes in the annual cycle sequences of hydrological periods (characteristic phases of the hydrological cycle) on the Vistula River mainstream and its tributaries were identified and their occurrence in the yearly cycle was discussed. Based on the detected changes of the 73-pentad Pardé’s coefficients of flow four main types of rivers were distinguished. Transformation of the flow regime was reflected in the identified different sequences of hydrological periods in the average annual cycle. It was found that while transformation of the Vistula River regime occurred along its whole course, the most frequent changes were detected in its upper, mountainous reaches, under the influence of the flow characteristics of its tributaries. This allowed the Vistula to be considered the allochthonous river. These findings are interesting not only from a theoretical point of view, but they also can be valuable to stakeholders in the field of the Vistula River basin water management and hydrological forecasting, including flood protection, which has recently become a matter of growing concern due to the observed effects of climate change and human impact.

Energy-minimization multiscale based mesoscale modeling and applications in gas-fluidized catalytic reactors

2019 ◽  
Vol 35 (8) ◽  
pp. 879-915 ◽  
Author(s):  
Bona Lu ◽  
Yan Niu ◽  
Feiguo Chen ◽  
Nouman Ahmad ◽  
Wei Wang ◽  
...  
Keyword(s):  
Energy Minimization ◽  
Fluid Model ◽  
Scale Up ◽  
Flow Characteristics ◽  
Chemical Kinetic ◽  
Mesoscale Modeling ◽  
Catalytic Reactors ◽  
Chemical Kinetic Model ◽  
Starting Point ◽  
Wide Range

Abstract Gas-solid fluidization is intrinsically dynamic and manifests mesoscale structures spanning a wide range of length and timescales. When involved with reactions, more complex phenomena emerge and thus pose bigger challenges for modeling. As the mesoscale is critical to understand multiphase reactive flows, which the conventional two-fluid model without mesoscale modeling may be inadequate to resolve even using extremely fine grids, this review attempts to demonstrate that the energy-minimization multiscale (EMMS) model could be a starting point to develop such mesoscale modeling. Then, the EMMS-based mesoscale modeling with emphasis on formulation of drag coefficients for different fluidization regimes, modification of mass transfer coefficient, and other extensions are discussed in an attempt to resolve the emerging challenges. Its applications with examples of development of novel fluid catalytic cracking and methanol-to-olefins processes prove that the mesoscale modeling plays a remarkable role in improving the predictions in hydrodynamic behaviors and overall reaction rate. However, the product content primarily depends on the chemical kinetic model itself, suggesting the necessity of an effective coupling between chemical kinetics and flow characteristics. The mesoscale modeling can be believed to accelerate the traditional experimental-based scale-up process with much lower cost in the future.

Analysis of Thick-Walled Pipeline Elements Operating in Creep Conditions

2015 ◽  
Vol 712 ◽  
pp. 63-68
Author(s):  
Przemysław Osocha ◽  
Bohdan Węglowski
Keyword(s):  
Finite Element ◽  
Test Data ◽  
Creep Test ◽  
Power Plants ◽  
Steam Pressure ◽  
Creep Model ◽  
Creep Process ◽  
Fe Model ◽  
Element Analysis ◽  
Wide Range

In some coal-fired power plants, pipeline elements have worked for over 200 000 hours and increased number of failures is observed. The paper discuses thermal wear processes that take place in those elements and lead to rupture. Mathematical model based on creep test data, and describing creep processes for analyzed material, has been developed. Model has been verified for pipeline operating temperature, lower than tests temperature, basing on Larson-Miller relation. Prepared model has been used for thermal-strength calculations based on a finite element method. Processes taking place inside of element and leading to its failure has been described. Than, basing on prepared mathematical creep model and FE model introduced to Ansys program further researches are made. Analysis of dimensions and shape of pipe junction and its influence on operational element lifetime is presented. In the end multi variable dependence of temperature, steam pressure and element geometry is shown, allowing optimization of process parameters in function of required operational time or maximization of steam parameters. The article presents wide range of methods. The creep test data were recalculated for operational temperature using Larson-Miller parameter. The creep strain were modelled, used equations and their parameters are presented. Analysis of errors were conducted. Geometry of failing pipe junction was introduced to the Ansys program and the finite element analysis of creep process were conducted.

Sign in / Sign up

Export Citation Format

Share Document