scholarly journals Investigation of the Performance and Emission Characteristics of a Diesel Engine with Different Diesel–Methanol Dual-Fuel Ratios

Processes ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 1944
Author(s):  
Shaoji Chen ◽  
Jie Tian ◽  
Jiangtao Li ◽  
Wangzhen Li ◽  
Zhiqing Zhang
Keyword(s):  
Diesel Engine ◽  
Three Dimensional ◽  
Kinetic Mechanism ◽  
Chemical Kinetic ◽  
Emission Characteristics ◽  
Performance And Emission ◽  
Power Characteristics ◽  
Methanol Content ◽  
Blended Fuel ◽  
Combustion Processes

In this paper, the effects of different diesel–methanol blends on the combustion and emission characteristics of diesel engines are investigated in terms of cylinder pressure, heat release rate, cylinder temperature, brake specific fuel consumption, thermal brake efficiency, brake power, and soot, nitrogen oxides, and carbon monoxide emissions in a four-stroke diesel engine. The corresponding three-dimensional Computational Fluid Dynamics (CFD) model was established using the Anstalt für Verbrennungskraftmaschinen List (AVL)-Fire coupled Chemkin program, and the chemical kinetic mechanism, including 135 reactions and 77 species, was established. The simulation model was verified by the experiment at 50% and 100% loads, and the combustion processes of pure diesel (D100) and diesel–methanol (D90M10, D80M20, and D70M30) were investigated, respectively. The results showed that the increase in methanol content in the blended fuel significantly improved the emission and power characteristics of the diesel engine. More specifically, at full load, the cylinder pressures increased by 0.78%, 1.21%, and 1.41% when the proportions of methanol in the blended fuel were 10%, 20%, and 30%, respectively. In addition, the power decreased by 2.76%, 5.04%, and 8.08%, respectively. When the proportion of methanol in the blended fuel was 10%, 20%, and 30%, the soot emissions were decreased by 16.45%, 29.35%, and 43.05%, respectively. Therefore, methanol content in blended fuel improves the combustion and emission characteristics of the engine.

scholarly journals Effect of Pre-Injection on Combustion and Emission Characteristics of a Diesel Engine Fueled with Diesel/Methanol/n-Butanol Blended Fuel

Processes ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 60
Author(s):  
Zhiqiang Wang ◽  
Lijun Li
Keyword(s):  
Diesel Engine ◽  
Kinetic Mechanism ◽  
Chemical Kinetic ◽  
Injection Timing ◽  
Emission Characteristics ◽  
Mass Ratio ◽  
Cfd Model ◽  
Fuel Mass ◽  
Mass Ratios ◽  
Blended Fuel

In this study, the combustion and emission characteristics of a diesel/methanol/n-butanol blended fuel engine with different pre-injection timings and pre-injection mass ratios were investigated by a computational fluid dynamics (CFD) model. The CFD model was verified by the measured results and coupled with a simplified chemical kinetics mechanism. Firstly, the corresponding three-dimensional CFD model was established by CONVERGE software and the CHEKMIN program, and a chemical kinetic mechanism containing 359 reactions and 77 species was developed. Secondly, the combustion and emission characteristics of the diesel engine with different diesel/methanol/n-butanol blended fuels were analyzed and discussed. The results showed that increases in the pre-injection timing and the pre-injection mass ratio could increase cylinder pressure and cylinder temperature and decrease soot, HC, and CO emissions. At 100% load, the maximum cylinder pressures at the start of pre-injection timing from −15 °CA to −45 °CA, were 7.71, 9.46, 9.85, 9.912, and 9.95 MPa, respectively. The maximum cylinder pressures at pre-injection fuel mass ratios from 0.1 to 0.9 were 7.98, 9.10, 9.96, 10.52, and 11.16 MPa, respectively. At 50% load, with increases of the pre-injection timing and pre-injection fuel mass ratio, the soot emission decreased by 7.30%, 9.45%, 27.70%, 66.80%, 81.80% and 11.30%, 20.03%, 71.32%, 83.80%, 93.76%, respectively, and CO emissions were reduced by 5.77%, 12.31%, 22.73%, 53.59%, 63.22% and 8.29%, 43.97%, 53.59%, 58.86%, 61.18%, respectively. However, with increases of the pre-injection timing and pre-injection mass ratio, NOx emission increased. In addition, it was found that the optimal pre-injection timing and optimal pre-injection mass ratio should be −30 °CA and 0.5, respectively. Therefore, through this study we can better understand the potential interaction of relevant parameters and propose pre-injection solutions to improve combustion and emission characteristics.

Performance and Emission Characteristics of Diesel Engine Using Alumina Nanoparticle Blended Biodiesel Emulsion Fuel

2015 ◽  
Vol 138 (2) ◽  
Author(s):  
A. Anbarasu ◽  
A. Karthikeyan ◽  
M. Balaji
Keyword(s):  
Diesel Engine ◽  
Alumina Nanoparticles ◽  
Emission Characteristics ◽  
Oxides Of Nitrogen ◽  
Smoke Emission ◽  
Entire Study ◽  
Brake Thermal Efficiency ◽  
Alumina Nanoparticle ◽  
Performance And Emission ◽  
Blended Fuel

Diesel engines are widely used for their low fuel consumption and better efficiency. An investigation was carried out with a single cylinder diesel engine to establish the effects of alumina nanoparticle incorporation into the Canola biodiesel (BD) emulsion fuel. The Canola BD was formed from the Canola oil by transesterification process, and later the Canola BD emulsion fuel was prepared in the fraction of 83% of Canola BD, 15% of water, and 2% of surfactants (by volume). The alumina nanoparticles were blended with the Canola BD emulsion fuel at different ratios systematically. The entire study was conducted in the diesel engine using the three fuels, namely, neat BD, Canola BD emulsion fuel, and alumina nanoparticle blended Canola emulsion fuels consecutively. The experimental results revealed a considerable improvement in the brake thermal efficiency (BTE) for the alumina blended Canola emulsion fuels compared with that of neat Canola BD and Canola BD emulsion fuel. At the full load, the BTE observed for the Canola BD fuel was 30.7%, whereas it was 27.81% and 31.6% for the Canola BD emulsion fuel and alumina nanoparticle blended emulsion fuel, respectively. The use of a nanoparticle blended BD fuel reduced the hydrocarbon (HC) and carbon monoxide (CO) emissions but increased oxides of nitrogen (NOx) emissions due to the increased oxygen content in the BD fuel but it was reduced in nanoparticle blended fuel. The smoke emission was reduced by 50% with the use of the nanoparticle blended emulsion fuel.

scholarly journals Influence of Compression Ratio on the Performance and Emission Characteristics of Annona Methyl Ester Operated DI Diesel Engine

2014 ◽  
Vol 6 ◽  
pp. 832470 ◽  
Author(s):  
Senthil Ramalingam ◽  
Paramasivam Chinnaia ◽  
Silambarasan Rajendran
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Compression Ratio ◽  
Diesel Fuel ◽  
Emission Characteristics ◽  
Performance Parameters ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Di Diesel Engine ◽  
Blended Fuel

This study aims to find the optimum performance and emission characteristics of single cylinder variable compression ratio (VCR) engine with different blends of Annona methyl ester (AME) as fuel. The performance parameters such as specific fuel consumption (SFC), brake thermal efficiency (BTE), and emission levels of HC, CO, Smoke, and NO x were compared with the diesel fuel. It is found that, at compression ratio of 17: 1 for A20 blended fuel (20% AME + 80% Diesel) shows better performance and lower emission level which is very close to neat diesel fuel. The engine was operated with different values of compression ratio (15, 16, and 17) to find out best possible combination for operating engine with blends of AME. It is also found that the increase of compression ratio increases the BTE and reduces SFC and has lower emission without any engine in design modifications.

Sign in / Sign up

Export Citation Format

Share Document