scholarly journals In Situ Fenton Triggered PDA Coating Copper Mesh with Underwater Superoleophobic Property for Oily Wastewater Pretreatment

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1665
Author(s):  
Ying Xu ◽  
Wei Wang ◽  
Zhigao Zhu ◽  
Bin Xu
Keyword(s):  
Separation Efficiency ◽  
Sewage Treatment ◽  
Cost Effective ◽  
Water Mixture ◽  
Oily Wastewater ◽  
New Approach ◽  
Inorganic Particles ◽  
Oil Water ◽  
Copper Mesh

The issue of oily wastewater treatment has become a worldwide challenge due to increasing industrial oily wastewater and frequent oil spill accidents. As an integral part of practical sewage treatment, pretreatment is conducted to remove inorganic particles, floating oil, and some emulsified oil, and to pave the way for post-treatment. Here, we report a facile fabricated, hydrostable, and rapid underwater-formed superoleophobic copper mesh with polydopamine (PDA) coating for efficient oily wastewater pre-treatment. Unlike with traditional technologies, using the interface phenomenon to solve the problem of oil/water mixture separation provided a new approach for the low energy input pretreatment process. The PDA coating formed by the in situ Fenton method not only rapidly constructs a protection layer for the etched hierarchical micro-size particles on mesh and results in enhanced hydrophilicity, but also exhibits high uniformity and enhanced stability in acid/alkali medium. Benefiting from the above processes, a very high flux of 25 L m−2 s−1 and high separation efficiency of 99.0% toward various oil/water mixtures were achieved, revealing excellent prospects for practical usage. Therefore, this new approach offered insight into the development of a cost-effective and functional method for efficient pretreatment of oily wastewater.

scholarly journals Preparation and Application of Superhydrophobic Copper Mesh by Chemical Etching and In-situ Growth

2021 ◽  
Vol 9 ◽  
Author(s):  
Qilei Tong ◽  
Zhenzhong Fan ◽  
Biao Wang ◽  
Qingwang Liu ◽  
Yunhe Bo ◽  
...  
Keyword(s):  
Contact Angle ◽  
Chemical Etching ◽  
Separation Efficiency ◽  
Water Mixture ◽  
Water Contact ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water ◽  
Copper Mesh

Oily sewage and floating oil in the ocean post a huge threat to the ecological environment, therefore, developing an efficient separation for oil/water mixtures is an urgent need. Currently, superhydrophobic materials exhibit excellent oil/water separation ability. In this study, a superhydrophobic copper mesh prepared by the chemical etching method and the in-situ growth method and the performance evaluation are introduced. The oxide layer on the surface of the copper mesh is first removed by pickling, and then immersed in FeCl3 solution for chemical etching to make the surface rough, stearic acid (SA) is used for in-situ growth to reduce the surface energy, a superhydrophobic oil-water separation copper mesh is obtained. The water contact angle (WCA) of the copper mesh is more than 160°. The copper mesh is chemically stable and can effectively adsorb floating oil and separate the oil-water mixture. After several oil-water separation experiments, the oil-water separation efficiency can still be above 98%. The effects of the concentration of FeCl3 and SA on the contact angle and oil-water separation efficiency are investigated, the results show that when the concentration of FeCl3 is 2% and SA is 1.5%, the WCA and oil-water separation efficiency are the largest. The research used a simple and environmentally friendly method to prepare the oil-water separation copper mesh, which has important application significance for water quality restoration.

scholarly journals Experimental Investigation of Copper Mesh Substrate with Selective Wettability to Separate Oil/Water Mixture

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4564
Author(s):  
Yuan ◽  
Cui ◽  
Qi ◽  
Wei ◽  
Qaisrani
Keyword(s):  
Separation Efficiency ◽  
Copper Substrate ◽  
Water Mixture ◽  
Oxidative Reaction ◽  
Liquid Flux ◽  
Oil Water ◽  
Low Efficiency ◽  
Underwater Superoleophobicity ◽  
Copper Mesh

To solve the problem of low efficiency and poor adaptability during complex oil/water mixtures separation, two types of membranes with superhydrophilicity/underwater-superoleophobicity were successfully fabricated by oxidative reaction and in situ displacement reaction methods. A nanoneedle Cu(OH)2 structure was generated on the copper mesh substrate by oxidative reaction and feathery micro/nanoscale composite, while Ag structure was constructed at the surface of copper mesh substrate through in-situ replacement, then, membranes with superhydrophilic/underwater-superoleophobic properties were separated. The influence of microstructure, wettability of the surface of prepared membranes and the liquid constituents in the separation experiment were studied and the liquid flux and permeation pressure at the membrane were later experimentally investigated. The experimental results show that separation efficiency of both membranes for separating different oil/water mixtures was above 99.8%. However, the separation efficiency of the Ag-CS (Ag on the copper substrate) membrane was obviously higher than that of the Cu(OH)2-CS (Cu(OH)2 on the copper substrate) membrane after 10 instances of separation because of the micro/nanocomposite structures. By comparison, it was found that the Ag-CS membrane showed a relatively higher permeation pressure but lower liquid flux as compared to Cu(OH)2-CS membrane, due to the influence of microscale structure and the wettability of the surface combined. In addition, the outcome for separating the multicomponent oil/water mixture illustrate that the result of TOC (the Total Organic Carbon) test for the Cu(OH)2-CS membrane and Ag-CS membrane were 31.2% and 17.7%, respectively, higher than the average of the two oils probably because some oil droplets created due to mutual dissolution passed through the membranes. However, these two fabricated membranes still retained higher separation efficiencies and good adaptability after 10 instances of separation. It was concluded that based on the good performances of the prepared membranes, especially the modified membrane, they have a vast application prospect and can be widely used.

scholarly journals Dodecyl Mercaptan Functionalized Copper Mesh for Water Repellence and Oil-water Separation

2021 ◽  
Vol 18 (4) ◽  
pp. 887-899
Author(s):  
Yanling Tian ◽  
Jiekai Feng ◽  
Zexin Cai ◽  
Jiaqi Chao ◽  
Dawei Zhang ◽  
...  
Keyword(s):  
Separation Efficiency ◽  
Synthesis Process ◽  
Water Separation ◽  
Oil Water Separation ◽  
One Step ◽  
Oil Water ◽  
Water Repellence ◽  
Copper Mesh ◽  
Dodecyl Mercaptan

AbstractReckless discharge of industrial wastewater and domestic sewage as well as frequent leakage of crude oil have caused serious environmental problems and posed severe threat to human survival. Various nature inspired superhy-drophobic surfaces have been successfully applied in oily water remediation. However, further improvements are still urgently needed for practical application in terms of facile synthesis process and long-term durability towards harsh environment. Herein, we propose a simple one-step dodecyl mercaptan functionalization method to fabricate Super-hydrophobic-Superoleophilic Copper Mesh (SSCM). The prepared SSCM possesses excellent water repellence and oil affinity, enabling it to successfully separate various oil-water mixtures with high separation efficiency (e.g., > 99% for hexadecane-water mixture). The SSCM retains high separating ability when hot water and strong corrosive aqueous solutions are used to simulate oil-water mixtures, indicating remarkable chemical durability of the dodecyl mercaptan functionalized copper mesh. Additionally, the efficiency can be well maintained during 50 cycles of separation, and the water repellence is even stable after storage in air for 120 days, demonstrating the reusability and long-term stability of the SSCM. Furthermore, the functionalized mesh also shows good mechanical robustness towards abrasion by sandpaper, and oil-water separation efficiency of > 96% can be obtained after 10 cycles of abrasion. The reported one-step dodecyl mercaptan functionalization could be a simple method for increasing the water repellence of copper mesh, and thereby be a great candidate for treating large-scale oily wastewater in harsh environments.

A facile fabrication of superhydrophobic and superoleophilic adsorption material 5A zeolite for oil–water separation with potential use in floating oil

Open Physics ◽  
2021 ◽  
Vol 19 (1) ◽  
pp. 486-493
Author(s):  
Ting Liang ◽  
Biao Wang ◽  
Zhenzhong Fan ◽  
Qingwang Liu
Keyword(s):  
Separation Efficiency ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Water Mixture ◽  
Water Separation ◽  
Oil Sorbent ◽  
Analysis Experiment ◽  
5A Zeolite ◽  
Oil Water ◽  
Potential Use

Abstract A facile method for fabricating superhydrophobic and superoleophilic powder with 5A zeolite and stearic acid (SA) is reported in this study. The effect of different contents of SA on contact angle (CA) was investigated. The maximum water CA was 156.2°, corresponding to the optimum SA content of 1.5 wt%. The effects of SA and the mechanism of modified 5A zeolite powder by SA were analyzed by sedimentation analysis experiment, FTIR analysis, particle size analysis, and SEM characterization. The SA-modified 5A zeolite was used as an oil sorbent to separate oil–water mixture with potential use in floating oil. The separation efficiency was above 98%.

Produced Water Handling Using Downhole Oil Water Separation Study Case Onshore & Offshore Fields Abu Dhabi

2021 ◽  
Author(s):  
Abdelhak Ladmia ◽  
Dr. Younes bin Darak Al Blooshi ◽  
Abdullah Alobedli ◽  
Dragoljub Zivanov ◽  
Myrat Kuliyev ◽  
...  
Keyword(s):  
Produced Water ◽  
Operating Cost ◽  
Cost Effective ◽  
Management Tool ◽  
Water Separation ◽  
Field Development ◽  
Effective Manner ◽  
Oil Water Separation ◽  
Oil Water

Abstract The expected profiles of the water produced from the mature ADNOC fields in the coming years imply an important increase and the OPEX of the produced and injected water will increase considerably. This requires in-situ water separation and reinjection. The objective of in-situ fluid separation is to reduce the cost of handling produced water and to extend the well natural flow performance resulting in increased and accelerated production. The current practice of handling produced water is inexpensive in the short term, but it can affect the operating cost and the recovery in the long term as the expected water cut for the next 10-15 years is forecasted to incease significantly. A new water management tool called downhole separation technology was developed. It separates oil and & gas from associated water inside the wellbore to be reinjected back into the disposal wells. The Downhole Oil Water Separation (DHOWS) Technology is one of the key development strategies that can reduce considerable amounts of produced water, improve hydrocarbon recovery, and minimize field development cost by eliminating surface water treatment and handling costs. The main benefits of DHOWS include acceleration of oil offtake, reduction of production cost, lessening produced water volumes, and improved utilization of surface facilities. In effect, DHOWS technologies require specific design criteria to meet the objectives of the well. Therefore, multi--discipline input data are needed to install an effective DHOWS with a robust design that economically outperforms and boosts oil and/or gas productions. This paper describes the fundamental criteria and workflow for selecting the most suitable DHOWS design for new and sidetracked wells to deliver ADNOC production mandates in a cost-effective manner while meeting completion requirements and adhering to reservoir management guidelines.

Investigating of Erosion-Corrosion Behavior of Carbon Steel in Egyptian Crude Oil-Water Mixture Using Electrochemical Method

2020 ◽  
Vol 234 (1) ◽  
pp. 75-84
Author(s):  
M.A. Deyab ◽  
S.T. Keera
Keyword(s):  
Crude Oil ◽  
Water Mixture ◽  
Passive Region ◽  
Disintegration Rate ◽  
Polarization Study ◽  
Region Flow ◽  
Erosion Corrosion ◽  
Oil Water ◽  
Sand Particles

AbstractAn in-situ electrochemical polarization study was used to investigate the erosion-corrosion (E-C) behavior of C-steel in Egyptian crude oil-water mixture (ECWM) under mimetic different conditions. The anodic polarization responses for C-steel in ECWM are recognized active-passive region. Flow rate, sand particles and temperature increased the E-C rate. Disintegration rate to erosion rate proportion (E/C) was calculated and talked about.

Squaraine chemistry. A new approach to symmetrical and unsymmetrical photoconductive squaraines. Characterization and solid state properties of these materials

1993 ◽  
Vol 71 (4) ◽  
pp. 494-505 ◽  
Author(s):  
Kock-Yee Law ◽  
F. Court Bailey
Keyword(s):  
Solid State ◽  
Condensation Reaction ◽  
Cost Effective ◽  
Squaric Acid ◽  
Reductive Alkylation ◽  
Reaction Sequence ◽  
New Approach ◽  
Effective Synthesis ◽  
Better Than

A new approach to 1-(p-dimethylaminophenyl)-2-hydroxycyclobutene-3,4-dione (4), a precursor for the synthesis of symmetrical and unsymmetrical photoconductive squaraines, is described. In situ generation of p-nitrophenyl ketene, by the reaction of p-nitrophenylacetyl chloride and triethylamine in the presence of tetraethoxyethylene in anhydrous ether, results in a (2 + 2) cycloaddition between the ketene and the electron-rich olefin. The cycloadduct generated, 6, was hydrolyzed to give 1-(p-nitrophenyl)-2-hydroxycyclobutene-3,4-dione (5) in 51% yield. Reductive alkylation of 5 by hydrogen in the presence of formaldehyde in DMF at 50–60 °C affords 4 in 81% yield. The overall yield of 4 is 41% from tetraethoxyethylene and is significantly better than other preparative procedures of 4 based on a partial Friedel–Crafts reaction or an arylation reaction of a squaric acid derivative with an aniline, where yields ranging from 8.5% to 24% were reported. Condensations of 4 with 2 equivalents of N,N-dimethylaniline and its derivatives in refluxing 2-propanol in the presence of 6 equivalents of tributyl orthoformate yield symmetrical squaraine 1a and unsymmetrical squaraines 1b–1e. The synthesis is accomplished by a (2 + 2) cycloaddition – reductive alkylation – condensation reaction sequence and represents a new, cost-effective synthesis for photoconductive squaraines where the expensive squaric acid reactant is bypassed. The spectroscopic and the solid state properties of 1a–1e have been studied. Results show that the properties exhibited by 1a–1e are essentially identical to those exhibited by other photoconductive, symmetrical squaraines that are synthesized by other known processes. From the resemblance in solid state properties, 1a–1e are expected to be photoconductive. This has indeed been observed in preliminary experiments.

Sign in / Sign up

Export Citation Format

Share Document