scholarly journals Numerical Study on Heat Transfer Efficiency of Regenerative Thermal Oxidizers with Three Canisters

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1621
Author(s):  
Guangyi Pu ◽  
Xiaoyin Li ◽  
Fangyang Yuan
Keyword(s):  
Heat Transfer ◽  
Gas Flow ◽  
Numerical Study ◽  
Operation Time ◽  
Transfer Efficiency ◽  
Physical Parameters ◽  
Outlet Temperature ◽  
Heat Transfer Efficiency ◽  
Switch Time ◽  
Volatile Organic

The heat transfer efficiency of a regenerative thermal oxidizer with three canisters used for volatile organic compounds treatment was studied using numerical simulation methods. A one-dimensional model that took into account the variation of physical parameters with temperature was built. The results show that the preheating temperature and outlet temperature tend to be stable as the operation time is increased. The heat transfer efficiency of equipment was mainly evaluated by heat recovery efficiency and energy recovery ratio under steady state conditions, which was affected by the inlet gas flow and temperature, valve switch time, combustion temperature, materials and porosity of the regenerative medium, and packing height. With the increase in packing cross-sectional area and packing height, the increase in heat transfer efficiency leads to an increase in equipment cost. Simultaneously, the shorter the valve switch time and the higher the density of the regenerative medium battery also help to improve the heat transfer efficiency without blocking equipment. Unless the removal efficiency of volatile organic compound treatment is reduced, it is recommended to reduce the inlet and combustion temperatures.

Intensification of heat transfer in a liquid film evaporator

2014 ◽  
Vol 68 (12) ◽  
Author(s):  
Pavol Timár ◽  
Lenka Nemsilová ◽  
Pavel Timár ◽  
Ján Stopka ◽  
Ladislav Štibrányi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Exchangers ◽  
Transformer Oil ◽  
Transfer Efficiency ◽  
Outlet Temperature ◽  
Falling Film ◽  
Heat Transfer Efficiency ◽  
Mass Flows ◽  
Pipe Heat

AbstractInfluence of the heat exchanger shape on the heat transfer efficiency investigated. Heat transfer efficiency of two vertical pipe-in-pipe heat exchangers, one with a straight wall and the other with a twisted wall were compared. Both heat exchangers worked on the principle of liquid falling film. Electric transformer oil was used as the heated liquid and water vapor at atmospheric pressure was used as the heating agent. Oil was just heated, not evaporated during the experiments. Oil inlet and outlet temperature were measured at six different oil mass flows. Heat flux and heat flux density in the straight- and twisted-wall heat exchangers were compared. Mathematical model was built to verify the possibility of the oil outlet temperature prediction.

Numerical Study on the Effect of Dislocation Relationship on Resistance Characters of the Ceramic Oxidation Bed Based on Fluent Software

2011 ◽  
Vol 347-353 ◽  
pp. 3798-3803
Author(s):  
Yong Qi Liu ◽  
Xiang Chun Chen
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Numerical Study ◽  
High Heat ◽  
Transfer Efficiency ◽  
Heat Transfer Efficiency ◽  
High Heat Transfer ◽  
Fluent Software ◽  
Resistance Loss ◽  
Overall Resistance

As ceramic oxidation bed has high heat transfer efficiency, now, great attention has been given on it. In the oxidation bed, between the honeycomb holes of the fore-and-aft blocks of ceramic honeycombs, there are dislocation relationships. The effect of dislocation relationship on the pressure drop of the oxidation bed was numerically simulated by Fluent software. The results show that, between the two blocks of closely adjacent ceramic honeycombs, when a gap distance of 1mm was left, compared to the situation the gap distance is 0, the overall resistance loss of the oxidation bed reduced vast.

scholarly journals A Computational Study on the Role of Parameters for Identification of Thyroid Nodules by Infrared Images (and Comparison with Real Data)

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4459
Author(s):  
José R. González ◽  
Charbel Damião ◽  
Maira Moran ◽  
Cristina A. Pantaleão ◽  
Rubens A. Cruz ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thyroid Nodules ◽  
Numerical Study ◽  
Computational Study ◽  
Internal Heat ◽  
Heat Transfer Process ◽  
The Body ◽  
Physical Parameters ◽  
Infrared Sensors ◽  
Wide Range

According to experts and medical literature, healthy thyroids and thyroids containing benign nodules tend to be less inflamed and less active than those with malignant nodules. It seems to be a consensus that malignant nodules have more blood veins and more blood circulation. This may be related to the maintenance of the nodule’s heat at a higher level compared with neighboring tissues. If the internal heat modifies the skin radiation, then it could be detected by infrared sensors. The goal of this work is the investigation of the factors that allow this detection, and the possible relation with any pattern referent to nodule malignancy. We aim to consider a wide range of factors, so a great number of numerical simulations of the heat transfer in the region under analysis, based on the Finite Element method, are performed to study the influence of each nodule and patient characteristics on the infrared sensor acquisition. To do so, the protocol for infrared thyroid examination used in our university’s hospital is simulated in the numerical study. This protocol presents two phases. In the first one, the body under observation is in steady state. In the second one, it is submitted to thermal stress (transient state). Both are simulated in order to verify if it is possible (by infrared sensors) to identify different behavior referent to malignant nodules. Moreover, when the simulation indicates possible important aspects, patients with and without similar characteristics are examined to confirm such influences. The results show that the tissues between skin and thyroid, as well as the nodule size, have an influence on superficial temperatures. Other thermal parameters of thyroid nodules show little influence on surface infrared emissions, for instance, those related to the vascularization of the nodule. All details of the physical parameters used in the simulations, characteristics of the real nodules and thermal examinations are publicly available, allowing these simulations to be compared with other types of heat transfer solutions and infrared examination protocols. Among the main contributions of this work, we highlight the simulation of the possible range of parameters, and definition of the simulation approach for mapping the used infrared protocol, promoting the investigation of a possible relation between the heat transfer process and the data obtained by infrared acquisitions.

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yao Li ◽  
Haiqing Si ◽  
Jingxuan Qiu ◽  
Yingying Shen ◽  
Peihong Zhang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat Exchanger ◽  
Heat And Mass Transfer ◽  
Field Performance ◽  
High Specific Surface Area ◽  
Calculation Model ◽  
Air Separation ◽  
Transfer Efficiency ◽  
Heat Transfer Efficiency

Abstract The plate-fin heat exchanger has been widely applied in the field of air separation and aerospace due to its high specific surface area of heat transfer. However, the low heat transfer efficiency of its plate bundles has also attracted more attention. It is of great significance to optimize the structure of plate-fin heat exchanger to improve its heat transfer efficiency. The plate bundle was studied by combining numerical simulation with experiment. Firstly, according to the heat and mass transfer theory, the plate bundle calculation model of plate-fin heat exchanger was established, and the accuracy of the UDF (User-Defined Functions) for describing the mass and heat transfer was verified. Then, the influences of fin structure parameters on the heat and mass transfer characteristics of channel were discussed, including the height, spacing, thickness and length of fins. Finally the influence of various factors on the flow field performance under different flow states was integrated to complete the optimal design of the plate bundle.

scholarly journals Thermo-Hydraulic Performance of U-Tube Borehole Heat Exchanger with Different Cross-Sections

2021 ◽  
Vol 13 (6) ◽  
pp. 3255
Author(s):  
Aizhao Zhou ◽  
Xianwen Huang ◽  
Wei Wang ◽  
Pengming Jiang ◽  
Xinwei Li
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Heat Resistance ◽  
Cross Sections ◽  
Three Dimensional ◽  
Thermal Response ◽  
Transfer Efficiency ◽  
Cross Sectional ◽  
Heat Transfer Efficiency ◽  
Oval Tube

For reducing the initial GSHP investment, the heat transfer efficiency of the borehole heat exchange (BHE) system can be enhanced to reduce the number or depth of drilling. This paper proposes a novel and simple BHE design by changing the cross-sectional shape of the U-tube to increase the heat transfer efficiency of BHEs. Specifically, in this study, we (1) verified the reliability of the three-dimensional numerical model based on the thermal response test (TRT) and (2) compared the inlet and outlet temperatures of the different U-tubes at 48 h under the premise of constant leg distance and fluid area. Referent to the circular tube, the increases in the heat exchange efficiencies of the curved oval tube, flat oval tube, semicircle tube, and sector tube were 13.0%, 19.1%, 9.4%, and 14.8%, respectively. (3) The heat flux heterogeneity of the tubes on the inlet and outlet sides of the BHE, in decreasing order, is flat oval, semicircle, curved oval, sector, and circle shapes. (4) The temperature heterogeneity of the borehole wall in the BHE in decreasing order is circle, sector, curved oval, flat oval, and semicircle shapes. (5) Under the premise of maximum leg distance, referent to the heat resistance of the tube with a circle shape at 48 h, the heat exchange efficiency of the curved oval, flat oval, semicircle, and sector tubes increased 12.6%, 17.7%, 10.3%, and 7.8%, respectively. (6) We found that the adjustments of the leg distance and the tube shape affect the heat resistance by about 25% and 12%, respectively. (7) The flat-oval-shaped tube at the maximum leg distance was found to be the best tube design for BHEs.

Development of Heat Exchanger Fouling Model and Preventive Maintenance Diagnostic Tool

2007 ◽  
Vol 2 (2) ◽  
Author(s):  
H. Zabiri ◽  
V. R. Radhakrishnan ◽  
M. Ramasamy ◽  
N. M. Ramli ◽  
V. Do Thanh ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Predictive Model ◽  
Diagnostic Tool ◽  
Preventive Maintenance ◽  
Heat Exchangers ◽  
Waste Heat ◽  
A Priori ◽  
Transfer Efficiency ◽  
Heat Transfer Efficiency

The Crude Preheat Train (CPT) is a set of large heat exchangers which recover the waste heat from product streams back to preheat the crude oil. The overall heat transfer coefficient in these heat exchangers may be significantly reduced due to fouling. One of the major impacts of fouling in CPT operation is the reduced heat transfer efficiency. The objective of this paper is to develop a predictive model using statistical methods which can a priori predict the rate of the fouling and the decrease in heat transfer efficiency in a heat exchanger in a crude preheat train. This predictive model will then be integrated into a preventive maintenance diagnostic tool to plan the cleaning of the heat exchanger to remove the fouling and bring back the heat exchanger efficiency to their peak values. The fouling model was developed using historical plant operating data and is based on Neural Network. Results show that the predictive model is able to predict the shell and tube outlet temperatures with excellent accuracy, where the Root Mean Square Error (RMSE) obtained is less than 1%, correlation coefficient R2 of approximately 0.98 and Correct Directional Change (CDC) values of more than 90%. A preliminary case study shows promising indication that the predictive model may be integrated into a preventive maintenance scheduling for the heat exchanger cleaning.

scholarly journals Numerical Simulation of Secondary Flow in Gas Turbine Disc Cavities, Including Conjugate Heat Transfer

1996 ◽  
Author(s):  
Y.-H. Ho ◽  
M. M. Athavale ◽  
J. M. Forry ◽  
R. C. Hendricks ◽  
B. M. Steinetz
Keyword(s):  
Heat Transfer ◽  
Secondary Flow ◽  
Conjugate Heat Transfer ◽  
Gas Flow ◽  
Numerical Study ◽  
Labyrinth Seal ◽  
Temperature Fields ◽  
Heat Transfer Analysis ◽  
Flow Rates ◽  
Turbine Disc

A numerical study of the flow and heat transfer in secondary flow elements of the entire inner portion of the turbine section of the Allison T-56/501D engine is presented. The flow simulation included the interstage cavities, rim seals and associated main path flows, while the energy equation also included the solid parts of the turbine disc, rotor supports, and stator supports. Solutions of the energy equations in these problems usually face the difficulty in specifications of wall thermal boundary conditions. By solving the entire turbine section this difficulty is thus removed, and realistic thermal conditions are realized on all internal walls. The simulation was performed using SCISEAL, an advanced 2D/3D CFD code for predictions of fluid flows and forces in turbomachinery seals and secondary flow elements. The mass flow rates and gas temperatures at various seal locations were compared with the design data from Allison. Computed gas flow rates and temperatures in the rim and labyrinth seal show a fair 10 good comparison with the design calculations. The conjugate heat transfer analysis indicates temperature gradients in the stationary intercavity walls, as well as the rotating turbine discs. The thermal strains in the stationary wall may lead to altered interstage labyrinth seal clearances and affect the disc cavity flows. The temperature, fields in the turbine discs also may lead to distortions that can alter the rim seal clearances. Such details of the flow and temperature fields are important in designs of the turbine sections to account for possible thermal distortions and their effects on the performance. The simulation shows that the present day CFD codes can provide the means to understand the complex flow field and thereby aid the design process.

A 3-D Model Simulation of High Temperature Solar Cavity Receiver

2017 ◽  
Author(s):  
Huayi Feng ◽  
Yanping Zhang ◽  
Chongzhe Zou
Keyword(s):  
Heat Transfer ◽  
Radiation Intensity ◽  
Large Scale ◽  
Model Simulation ◽  
Heat Transfer Fluid ◽  
Working Fluid ◽  
Outlet Temperature ◽  
Fluid Temperature ◽  
Heat Transfer Efficiency ◽  
Direct Normal Irradiance

In this paper, a 3-D numerical model is proposed to investigate the capability of generating high operating temperature for a modified solar cavity receiver in large-scale dish Stirling system. The proposed model aims to evaluate the influence of radiation intensity on the cavity receiver performance. The properties of the heat transfer fluid in the pipe and heat transfer losses of the receiver are investigated by varying the direct normal irradiance from 400W/m2 to 1000W/m2. The temperature of heat transfer fluid, as well as the effect of radiation intensity on the heat transfer losses have been critically presented and discussed. The simulation results reveal that the heat transfer fluid temperature and thermal efficiency of the receiver are significantly influenced by different radiation flux. With the increase of radiation intensity, the efficiency of the receiver will firstly increase, then drops after reaching the highest point. The outlet working fluid temperature of the pipe will be increased consistently. The results of the simulations show that the designed cylindrical receiver used in dish Stirling system is capable to achieve the targeted outlet temperature and heat transfer efficiency, with an acceptable pressure drop.

Sign in / Sign up

Export Citation Format

Share Document