scholarly journals Optimization of the Tracer Particle Addition Method for PIV Flowmeters

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1614
Author(s):  
Yilong Qiu ◽  
Huiyu Chen ◽  
Wangxu Li ◽  
Feng Wu ◽  
Zhenggui Li
Keyword(s):  
Natural Gas ◽  
Flow Field ◽  
Measurement Accuracy ◽  
Particle Distribution ◽  
Tracer Particle ◽  
Distribution Area ◽  
Field Fluctuation ◽  
Particle Injection ◽  
Injection Flow ◽  
Tracer Particles

When a PIV flowmeter is used to measure a large flow of natural gas, the flow field fluctuation and particle distribution have a significant influence on the measurement accuracy and the particle injection mode plays a key role in the flow field fluctuation and particle distribution. To improve the measurement accuracy of PIV flowmeters, the method of filling tracer particles in single pipes, multiple pipes, and L pipes of a natural gas DN100 pipeline under high-pressure working conditions was compared and analyzed through numerical calculation and testing. The results show that the disturbance distance of filling particles in L pipes was the shortest, but the particle distribution area was small, whereas the flow metering error was large. By shortening the intersection distance between the L tube injection flow field and the main flow field, the problem that the particles failed to fill the test area was effectively solved, and the peak turbulence intensity at the intersection of the flow field decreased from 13.4% to 8%. Furthermore, the optimized structure was used to measure a flow of 100–600 m3/h with different flow rates. The relative error between the flowmeter and the ultrasonic flowmeter was approximately 2%, and the metering deviation was significantly improved.

Study on flow field of gas–solid two-phase pulsed jet

2019 ◽  
Vol 33 (24) ◽  
pp. 1950279
Author(s):  
Xinhua Song ◽  
Xiaojie Li ◽  
Yang Wang ◽  
Honghao Yan
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Particle Distribution ◽  
Starch Granule ◽  
Injection Pressure ◽  
Two Phase ◽  
Particle Injection ◽  
Pulsed Jet ◽  
Simulation Based ◽  
Simulation Results

In this paper, a computational fluid dynamics–discrete element method (CFD–DEM) coupling method is established to simulate the starch granule injection by coupling CFD and DEM. Then a gas–solid two-phase pulsed jet system is designed to capture the flow field trajectory of particle injection (colored starch with a mean diameter of 10.67 [Formula: see text]m), and the image is processed by color moment and histogram. Finally, the simulation results are compared with the experimental results, and the following conclusions are drawn. The numerical simulation results show that with the increase of injection pressure, the injection height increases gradually. When the injection pressure reaches above 0.4 MPa, the increase of injection height decreases. The experimental images show that the larger the pressure (i.e., the greater the initial velocity), the faster the velocity of particle distribution in the space, and the injection heights with the injection pressures of 0.4 MPa and 0.5 MPa are close, which is consistent with the result from the FLUENT numerical simulation based on CFD–DEM.

scholarly journals Aerial tracer particle distribution system for surface image velocimetry

2021 ◽  
Author(s):  
H. J. Biggs ◽  
B. Smith ◽  
M. Detert ◽  
H. Sutton
Keyword(s):  
Distribution System ◽  
Particle Distribution ◽  
Tracer Particle ◽  
Flow Measurements ◽  
Tracer Particles ◽  
Image Velocimetry ◽  
Surface Image ◽  
Aerial Vehicle ◽  
Hsv Colour Space ◽  
Natural Tracer

A novel aerial tracer particle distribution system has been developed. This system is mounted on an Unmanned Aerial Vehicle (UAV) and flown upstream from where surface velocimetry measurements are conducted. This enables surface velocimetry techniques to be applied in rivers and channels lacking sufficient natural tracer particles or surface features. Lack of tracers is a common problem during low flows, in lowland rivers, or in artificial channels. This is particularly problematic for analysis conducted using Particle Image Velocimetry (PIV) techniques where dense tracer particles are required. Techniques for colouring tracer particles with biodegradable dye have also been developed, along with methods for extracting them from Red Green Blue (RGB) imagery in the Hue Saturation Value (HSV) colour space. The use of coloured tracer particles enables flow measurements in situations where sunglint, surface waves, moving shadows, or dappled lighting on riverbeds can interfere with and corrupt results using surface velocimetry techniques. These developments further expand the situations where surface velocimetry can be applied, as well as improving the accuracy of the results.

TRACER TIME DISTRIBUTION OF PARTICLES IN POROUS MEDIA

Fractals ◽  
1993 ◽  
Vol 01 (04) ◽  
pp. 1075-1079
Author(s):  
MARIELA ARAUJO
Keyword(s):  
Porous Medium ◽  
Transit Time ◽  
Power Law ◽  
Time Distribution ◽  
Tracer Particle ◽  
Power Law Distribution ◽  
Low Velocity ◽  
Constant Flow Rate ◽  
Variable Permeability ◽  
Tracer Particles

We study the transit time distributions of tracer particles in a porous medium through which a constant flow rate is established. Our model assumes that non-Gaussian dispersion is due to the presence of low velocity zones or channels in parallel with a faster flow path. Each channel is represented as a trap and simulates the existence of variable permeability blocks inside the porous medium. The time the tracer particle spends inside each channel is related to the heterogeneity of the sample, and is assumed here to have a power-law distribution. We compare the transit time distribution of these particles for the case in which the traps are Poisson distributed with the one in which the trap distribution is a power-law function.

PIV Measurements of Propeller Flow Field in a Large Cavitation Tunnel

2011 ◽  
Author(s):  
Takayuki Mori ◽  
Risa Kimoto ◽  
Kenji Naganuma
Keyword(s):  
Flow Field ◽  
Velocity Profiles ◽  
Marine Propeller ◽  
Measured Velocity ◽  
Piv Measurements ◽  
Tip Vortices ◽  
Systems Research ◽  
Tracer Particles ◽  
Cavitation Tunnel ◽  
Blade Tip

Flow field around a marine propeller was measured by means of PIV technique in a large cavitation tunnel of the Naval Systems Research Center, TRDI/Ministry of Defense, Japan. Test section of the tunnel is 2m(W) × 2m(H) × 10m(L) and it contains 2000m3 of water. 2-dimensional PIV (2-D PIV) and stereo PIV (SPIV) measurements were made for a five-bladed highly skewed marine propeller. In the case of 2-D PIV measurements, high spatial resolution measurements were possible by seeding relatively small amount of tracer particles. Phase-averaged flow fields showed details on evolution of tip vortices. In the case of SPIV measurements, much larger amounts of tracer particles were required, and it was difficult to perform high resolution measurements. Phase averaged velocity profiles from SPIV measurements showed good agreement with 2-D PIV-measured results. PIV-measured results were compared with results of LDV measurements. Although PIV-measured velocity profiles showed fairly good agreements with LDV-measured results, some discrepancies were found at the blade tip region.

scholarly journals Effect of Engine Specifications on In-Cylinder Flow Field in a Spark-Ignited Natural Gas Engine

1999 ◽  
Vol 34 (11) ◽  
pp. 764-773
Author(s):  
Yukiyoshi Fukano ◽  
Kazuo Tachibana ◽  
Shigeo Kida ◽  
Toshikazu Kadota
Keyword(s):  
Natural Gas ◽  
Flow Field ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Cylinder Flow

scholarly journals Translocation of RNA-coated gold particles through the nuclear pores of oocytes.

1988 ◽  
Vol 106 (3) ◽  
pp. 575-584 ◽  
Author(s):  
S I Dworetzky ◽  
C M Feldherr
Keyword(s):  
Electron Microscopy ◽  
Xenopus Oocytes ◽  
Particle Distribution ◽  
Polyglutamic Acid ◽  
5S Rna ◽  
Nuclear Pores ◽  
Gold Particles ◽  
Specific Effects ◽  
Tracer Particles ◽  
Nuclear Injection

In the present study, various sized gold particles coated with tRNA, 5S RNA, or poly(A) were used to localize and characterize the pathways for RNA translocation to the cytoplasm. RNA-coated gold particles were microinjected into the nucleus of Xenopus oocytes. The cells were fixed after 15, 60 min, or 6 h, and the particle distribution was later observed by electron microscopy. Similar results were obtained with all classes of RNA used. After nuclear injection, particles ranging from 20-230 A in diameter were observed within central channels of the nuclear pores and in the cytoplasm immediately adjacent to the pores. Particles of this size would not be expected to diffuse through the pores, suggesting that some form of mediated transport occurred. In addition, it was found that the translocation process is saturable. At least 97% of the pores analyzed appeared to be involved in the translocation process. Gold coated with nonphysiological polynucleotides (poly[I] or poly[dA]) were also translocated. When nuclei were injected with either BSA-, ovalbumin-, polyglutamic acid-, or PVP-coated gold, the particles were essentially excluded from the pores. These results indicate that the accumulation of RNA-gold within the pores and adjacent cytoplasm was not due to non-specific effects. We conclude that the translocation sites for gold particles coated with different classes of RNA are located in the centers of the nuclear pores and that particles at least 230 A in diameter can cross the envelope. Tracer particles injected into the cytoplasm were observed within the nuclear pores in areas near the site of injection. However, only a small percentage of the particles actually entered the nucleus. It was also determined, by performing double injection experiments, that individual pores are bifunctional, that is, capable of transporting both proteins and RNA.

Tracer trajectories and displacement due to a micro-swimmer near a surface

2015 ◽  
Vol 773 ◽  
pp. 498-519 ◽  
Author(s):  
A. J. T. M. Mathijssen ◽  
D. O. Pushkin ◽  
J. M. Yeomans
Keyword(s):  
Particle Transport ◽  
Numerical Study ◽  
Tracer Particle ◽  
Persistence Length ◽  
Theoretical Work ◽  
Solid Boundary ◽  
Tracer Transport ◽  
Tracer Particles ◽  
Recent Theoretical Work ◽  
Run And Tumble

We study tracer particle transport due to flows created by a self-propelled micro-swimmer, such as a swimming bacterium, alga or a microscopic artificial swimmer. Recent theoretical work has shown that as a swimmer moves in the fluid bulk along an infinite straight path, tracer particles far from its path perform closed loops, whereas those close to the swimmer are entrained by its motion. However, in biologically and technologically important cases tracer transport is significantly altered for swimmers that move in a run-and-tumble fashion with a finite persistence length, and/or in the presence of a free surface or a solid boundary. Here we present a systematic analytical and numerical study exploring the resultant regimes and their crossovers. Our focus is on describing qualitative features of the tracer particle transport and developing quantitative tools for its analysis. Our work is a step towards understanding the ecological effects of flows created by swimming organisms, such as enhanced fluid mixing and biofilm formation.

Sign in / Sign up

Export Citation Format

Share Document