scholarly journals Synthesis of Palladium and Copper Nanoparticles Supported on TiO2 for Oxidation Solvent-Free Aerobic Oxidation of Benzyl Alcohol

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1590
Author(s):  
Hamed M. Alshammari
Keyword(s):  
Benzyl Alcohol ◽  
Photoelectron Spectroscopy ◽  
Aerobic Oxidation ◽  
Catalytic Performance ◽  
X Ray ◽  
Oxidation Of Benzyl Alcohol ◽  
Transmission Electron ◽  
Bimetallic Nanostructures ◽  
Catalyst Reusability ◽  
Low Activity

The use of metal oxides as supports for palladium and copper (Pd–Cu) nanoalloys constitutes a new horizon for improving new active catalysts in very important reactions. From the literatures, Pd-based bimetallic nanostructures have great properties and active catalytic performance. In this work, nanostructures of titanium dioxide (TiO2) were used as supports for Pd–Cu nanoparticles catalysts. Palladium and copper were deposited on these supports using the sol-immobilisation method. The composite nanoalloys were characterized using transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The catalyst was evaluated for the oxidation of benzyl alcohol. The effect of the Cu–Pd ratio using sol-immobilization methods supported on TiO2 was investigated. The results show that monometallic Cu/TiO2 was observed to have a low activity. However, as soon as the catalyst contained any palladium, the activity increased with a significant increase in the selectivity towards isomerization products. The influence of support and temperature were investigated. Furthermore, the catalyst reusability was also tested for oxidation of benzyl alcohol reactions, by repeatedly performing the same reaction using the recovered catalyst. The Pd–Cu/TiO2 catalyst displayed better reusability even after several reactions

On the selective aerobic oxidation of benzyl alcohol with Pd/Au-nanoparticles in batch and flow

2014 ◽  
Vol 3 (1) ◽  
pp. 99-110 ◽  
Author(s):  
Hannes Alex ◽  
Norbert Steinfeldt ◽  
Klaus Jähnisch ◽  
Matthias Bauer ◽  
Sandra Hübner
Keyword(s):  
Catalytic Activity ◽  
Benzyl Alcohol ◽  
Aerobic Oxidation ◽  
X Ray ◽  
X Ray Scattering ◽  
Oxidation Of Benzyl Alcohol ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Selective Aerobic Oxidation

AbstractNanoparticles (NP) have specific catalytic properties, which are influenced by parameters like their size, shape, or composition. Bimetallic NPs, composed of two metal elements can show an improved catalytic activity compared to the monometallic NPs. We, herein, report on the selective aerobic oxidation of benzyl alcohol catalyzed by unsupported Pd/Au and Pd NPs at atmospheric pressure. NPs of varying compositions were synthesized and characterized by UV/Vis spectroscopy, transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). The NPs were tested in the model reaction regarding their catalytic activity, stability, and recyclability in batch and continuous procedure. Additionally, in situ extended X-ray absorption fine structure (EXAFS) measurements were performed in order to get insight in the process during NP catalysis.

scholarly journals Oxidized Palladium Supported on Ceria Nanorods for Catalytic Aerobic Oxidation of Benzyl Alcohol to Benzaldehyde in Protic Solvents

Catalysts ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 847 ◽  
Author(s):  
Seyed Moeini ◽  
Chiara Battocchio ◽  
Stefano Casciardi ◽  
Igor Luisetto ◽  
Paolo Lupattelli ◽  
...  
Keyword(s):  
Benzyl Alcohol ◽  
Surface Area ◽  
Photoelectron Spectroscopy ◽  
Aerobic Oxidation ◽  
Bet Surface Area ◽  
Impregnation Method ◽  
X Ray ◽  
Protic Solvents ◽  
Oxidation Of Benzyl Alcohol ◽  
Temperature Programmed

In the present study, the catalytic activity of palladium oxide (PdOx) supported on ceria nanorods (CeO2-NR) for aerobic selective oxidation of benzyl alcohol (BnOH) to benzaldehyde (PhCHO) was evaluated. The CeO2-NR was synthesized hydrothermally and the Pd(NO3)2 was deposited by a wet impregnation method, followed by calcination to acquire PdOx/CeO2-NR. The catalysts were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), transmission electron microscopy (TEM), Brunauer–Emmet–Teller (BET) surface area analysis, and X-ray photoelectron spectroscopy (XPS). In addition, the TPR-reduced PdOx/CeO2-NR (PdOx/CeO2-NR-Red) was studied by XRD, BET, and XPS. Characterizations showed the formation of CeO2-NR with (111) exposed plane and relatively high BET surface area. PdOx (x > 1) was detected to be the major oxide species on the PdOx/CeO2-NR. The activities of the catalysts in BnOH oxidation were evaluated using air, as an environmentally friendly oxidant, and various solvents. Effects of temperature, solvent nature and palladium oxidation state were investigated. The PdOx/CeO2-NR showed remarkable activity when protic solvents were utilized. The best result was achieved using PdOx/CeO2-NR and boiling ethanol as solvent, leading to 93% BnOH conversion and 96% selectivity toward PhCHO. A mechanistic hypothesis for BnOH oxidation with PdOx/CeO2-NR in ethanol is presented.

Synthesis of Novel g-C3N4/NH2-MIL-88B(Fe) Composite Photocatalysis for Efficient Ciprofloxacin Degradation Under Simulated Sunlight Irradiation

NANO ◽  
2021 ◽  
pp. 2150063
Author(s):  
Jungang Yi ◽  
Kun Wu ◽  
Huadong Wu ◽  
Jia Guo ◽  
Linfeng Zhang ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Adsorption Property ◽  
Catalytic Performance ◽  
Step Method ◽  
Area Formula ◽  
Aquatic Life ◽  
X Ray ◽  
Transmission Electron ◽  
Uniform Dispersion ◽  
Composite Photocatalysts

The presence of the antibiotics in the wastewater has posed a huge risk to aquatic life and human health. It is a great significance to develop an effective technology to treat the antibiotics-containing wastewater. In this study, a series of g-C3N4/NH2-MIL-88B(Fe) composite photocatalysts are synthesized through a simple one-step method. The structure and optical properties of prepared photocatalysts are detected by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV–Vis absorption spectra (UV–Vis DRS), photoluminescence (PL) spectroscopy and transient photocurrent techniques, respectively. FESEM and TEM show that MOF is uniformly dispersed in petaloid g-C3N4. The uniform dispersion of Fe-MOFs in the heterojunction composites increases the specific surface area ([Formula: see text] of g-C3N4, which results in a great adsorption property for the nanocomposite. The capture experiment shows that [Formula: see text]O[Formula: see text] and h[Formula: see text] are the main active substances in ciprofloxacin (CIP) degradation. These prepared composite photocatalysts exhibit excellent CIP photodegradation activity under visibly light irradiation with an apparent rate constant of 0.0127[Formula: see text]min[Formula: see text] (3.74 times as the rate of single component). The remarkable catalytic performance can be ascribed to the fact that the g-C3N4/NH2-MIL-88B(Fe) heterojunction inhibits the recombination of photoinduced electron–hole pairs and improved the visible light absorption.

scholarly journals Capping Agent Effect on Pd-Supported Nanoparticles in the Hydrogenation of Furfural

Catalysts ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 11 ◽  
Author(s):  
Shahram Alijani ◽  
Sofia Capelli ◽  
Stefano Cattaneo ◽  
Marco Schiavoni ◽  
Claudio Evangelisti ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Active Sites ◽  
Catalytic Performance ◽  
Shielding Effect ◽  
Capping Agents ◽  
X Ray ◽  
Supported Nanoparticles ◽  
Liquid Phase Hydrogenation ◽  
Diallyldimethylammonium Chloride ◽  
Transmission Electron

The catalytic performance of a series of 1 wt % Pd/C catalysts prepared by the sol-immobilization method has been studied in the liquid-phase hydrogenation of furfural. The temperature range studied was 25–75 °C, keeping the H2 pressure constant at 5 bar. The effect of the catalyst preparation using different capping agents containing oxygen or nitrogen groups was assessed. Polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), and poly (diallyldimethylammonium chloride) (PDDA) were chosen. The catalysts were characterized by ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The characterization data suggest that the different capping agents affected the initial activity of the catalysts by adjusting the available Pd surface sites, without producing a significant change in the Pd particle size. The different activity of the three catalysts followed the trend: PdPVA/C > PdPDDA/C > PdPVP/C. In terms of selectivity to furfuryl alcohol, the opposite trend has been observed: PdPVP/C > PdPDDA/C > PdPVA/C. The different reactivity has been ascribed to the different shielding effect of the three ligands used; they influence the adsorption of the reactant on Pd active sites.

scholarly journals Optimization of sol-immobilized bimetallic Au–Pd/TiO 2 catalysts: reduction of 4-nitrophenol to 4-aminophenol for wastewater remediation

2020 ◽  
Vol 378 (2176) ◽  
pp. 20200057
Author(s):  
Khaled Alshammari ◽  
Yubiao Niu ◽  
Richard E. Palmer ◽  
Nikolaos Dimitratos
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Reduction ◽  
Catalytic Performance ◽  
Reducing Agent ◽  
Wastewater Remediation ◽  
X Ray ◽  
Molar Ratios ◽  
Highly Active ◽  
Transmission Electron ◽  
Complementary Techniques

A sol-immobilization method is used to synthesize a series of highly active and stable Au x Pd 1− x /TiO 2 catalysts (where x  = 0, 0.13, 0.25, 0.5, 0.75, 0.87 and 1) for wastewater remediation. The catalytic performance of the materials was evaluated for the catalytic reduction of 4-nitrophenol, a model wastewater contaminant, using NaBH 4 as the reducing agent under mild reaction conditions. Reaction parameters such as substrate/metal and substrate/reducing agent molar ratios, reaction temperature and stirring rate were investigated. Structure-activity correlations were studied using a number of complementary techniques including X-ray powder diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. The sol-immobilization route provides very small Au–Pd alloyed nanoparticles, with the highest catalytic performance shown by the Au 0.5 Pd 0.5 /TiO 2 catalyst. This article is part of a discussion meeting issue ‘Science to enable the circular economy’.

scholarly journals A Novel Pd-P Nano-Alloy Supported on Functionalized Silica for Catalytic Aerobic Oxidation of Benzyl Alcohol

Catalysts ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 20
Author(s):  
Seyed Sepehr Moeini ◽  
Umberto Pasqual Laverdura ◽  
Eleonora Marconi ◽  
Nicola Lisi ◽  
Emanuele Serra ◽  
...  
Keyword(s):  
Benzyl Alcohol ◽  
Aerobic Oxidation ◽  
Critical Role ◽  
Chemical Properties ◽  
Catalytic Performance ◽  
Pure Oxygen ◽  
Noble Metal Catalysts ◽  
Functionalized Mesoporous Silica ◽  
Oxidation Of Benzyl Alcohol

Catalytic aerobic oxidation of benzyl alcohol (BnOH) to benzaldehyde (PhCHO) over supported noble metal catalysts has grabbed the attention of researchers due to the critical role of PhCHO in numerous industrial syntheses. In the present study, a novel catalyst, Pd-P alloy supported on aminopropyl-functionalized mesoporous silica (NH2-SiO2), was prepared through in situ reduction and characterized by BET-BJH analysis, SEM, TEM, XRD, FTIR, TG-DTA, and XPS. Chemical properties and catalytic performance of Pd-P/NH2-SiO2 were compared with those of Pd0 nanoparticles (NPs) deposited on the same support. Over Pd-P/NH2-SiO2, the BnOH conversion to PhCHO was much higher than over Pd0/NH2-SiO2, and significantly influenced by the nature of solvent, reaching 57% in toluene at 111 °C, with 63% selectivity. Using pure oxygen as an oxidant in the same conditions, the BnOH conversion increased up to 78%, with 66% selectivity. The role of phosphorous in improving the activity may consist of the strong interaction with Pd that favours metal dispersion and lowers Pd electron density.

scholarly journals Preparation of g-C3N4/MoS2 Composite Material and Its Visible Light Catalytic Performance

2021 ◽  
Author(s):  
Yu Fan ◽  
Yan-ning Yang ◽  
Chen Ding
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Photogenerated Electron ◽  
Catalytic Performance ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Calcination Method

Abstract The g-C3N4 nanosheet was prepared by calcination method, the MoS2 nanosheet was prepared by hydrothermal method. The g-C3N4/MoS2 composites were prepared by ultrasonic composite in anhydrous ethanol. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-Vis), and photoluminescence (PL) techniques were used to characterize the materials. The photocatalytic degradation of Rhodamine B (Rh B) by g-C3N4/MoS2 composites with different mass ratios was investigated under visible light. The results show that a small amount of MoS2 combined with g-C3N4 can significantly improve photocatalytic activity. The g-C3N4/MoS2 composite with a mass ratio of 1:8 has the highest photocatalytic activity, and the degradation rate of Rh B increases from 50% to 99.6%. The main reason is that MoS2 and g-C3N4 have a matching band structure. The separation rate of photogenerated electron-hole pairs is enhanced. So the g-C3N4/MoS2 composite can improve the photocatalytic activity. The photocatalytic mechanism was proposed through the active matter capture experiment.

Au NPs Loaded Al-MOF@PPy as Excellent Catalyst for the Removal of Organic Pollutants from Water

NANO ◽  
2021 ◽  
pp. 2150002
Author(s):  
Yalu Wu ◽  
Yinyin Xu ◽  
Jingbo Feng ◽  
Yan Zhang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Water Solution ◽  
Catalytic Performance ◽  
Degradation Efficiency ◽  
X Ray ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Growth Method ◽  
Infrared Spectrometer

The novel Al-MOF@PPy@Au nanocomposites were synthesized by an in-situ growth method. The prepared Al-MOF@PPy@Au nanocomposites were characterized by Transmission Electron Microscope (TEM), Fourier Transform Infrared Spectrometer (FTIR), X-ray powder diffraction (XRD), Inductively Coupled Plasma (ICP) and X-ray photoelectron spectroscopy (XPS). The catalytic properties of the prepared Al-MOF@PPy@Au nanocomposites with different content of Au were investigated. The results illustrated that the Al-MOF@PPy@Au(G) with 27.80 wt.% (w/w) Au obtained good catalytic performance. P-nitrophenol (4-NP), methyl orange (MO), methylene blue (MB) and rhodamine B (RhB) were used to test the catalytic degradation of Al-MOF@PPy@Au(G) nanocomposites. The degradation efficiency of the Al-MOF@PPy@Au(G) nanocomposites for 4-NP, MO, MB and RhB reached 92.12%, 93.84%, 93.19% and 92.44% within 25 min, 7 min, 16 min and 2 min, respectively. The Al-MOF@PPy@Au(G) nanocomposites still have good degradation efficiency and good stability for 4-NP within one month being in water. The Al-MOF@PPy@Au(G) nanocomposites can be applied to the real water solution without causing the change of the degradation efficiency.

scholarly journals Effect of Direct Reduction Treatment on Pt–Sn/Al2O3 Catalyst for Propane Dehydrogenation

Catalysts ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 446 ◽  
Author(s):  
Jae-Won Jung ◽  
Won-Il Kim ◽  
Jeong-Rang Kim ◽  
Kyeongseok Oh ◽  
Hyoung Lim Koh
Keyword(s):  
Catalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Direct Reduction ◽  
Coke Formation ◽  
Catalytic Performance ◽  
Propane Dehydrogenation ◽  
X Ray ◽  
Transmission Electron ◽  
Calcination Step ◽  
Xrd Patterns

Pt–Sn/Al2O3 catalysts were prepared by the direct reduction method at temperatures from 450 to 900 °C, denoted as an SR series (SR450 to SR900 according to reduction temperature). Direct reduction was performed immediately after catalyst drying without a calcination step. The activity of SR catalysts and a conventionally prepared (Cal600) catalyst were compared to evaluate its effect on direct reduction. Among the SR catalysts, SR550 showed overall higher conversion of propane and propylene selectivity than Cal600. The nano-sized dispersion of metals on SR550 was verified by transmission electron microscopy (TEM) observation. The phases of the bimetallic Pt–Sn alloys were examined by X-ray diffraction, TEM, and energy dispersive X-ray spectroscopy (EDS). Two characteristic peaks of Pt3Sn and PtSn alloys were observed in the XRD patterns, and these phases affected the catalytic performance. Moreover, EDS confirmed the formation of Pt3Sn and PtSn alloys on the catalyst surface. In terms of catalytic activity, the Pt3Sn alloy showed better performance than the PtSn alloy. Relationships between the intermetallic interactions and catalytic activity were investigated using X-ray photoelectron spectroscopy. Furthermore, qualitative analysis of coke formation was conducted after propane dehydrogenation using differential thermal analysis.

Sign in / Sign up

Export Citation Format

Share Document